Professional Documents
Culture Documents
LOCTITE North American Product Catalog
LOCTITE North American Product Catalog
LOCTITE North American Product Catalog
P R O D U C T C ATA L O G
LOCTITE® PRODUCT CATALOG
This is the first edition of the newly-redesigned LOCTITE® Product
Catalog. With this edition, we’ve put an emphasis on the products
you most frequently need, making it easier than ever to find the
products that solve the majority of issues you will face for product
design and assembly and for maintenance, repair and operation.
1 N O R T H A M E R I C A N P R O D U C T C ATA L O G
5 57 109
Threadlockers Structural Lubricants
Prevent fastener loosening Adhesives Prevent friction, heat or wear
and seizure between metal surfaces
Bond structural assemblies and
repair damaged parts
15 113
Thread Sealants 69 Anti-Seize Products
Prevent leaks – air, hydraulic Flexible Adhesives Prevent rust, corrosion, galling
and Sealants or seizing on metal parts in
extreme environments
Bond and seal parts that
23 experience movement
Gasketing 119
Products
Prevent flange leaks – oil,
77 Specialty
transmission, coolant Light Cure Maintenance
Adhesives Technologies
Solve nearly any issue with a
On-demand curing
31 wide range of solutions
Retaining
Compounds 87 125
Prevent backlash – keyway wallowing, Cleaners
spun bearings, shaft misalignment,
Nozzles
Clean and degrease
wear, corrosion parts and work surfaces
127
39 93 Index
Instant Wear Prevention
Adhesives Fight rust, chemical corrosion and
Bond dissimilar parts quickly wear and improve performance.
and easily
101
49 Rebuilding
Universal Rebuild worn or corroded surfaces
Bonders
Bond a wide range of materials fast
2
LOCTITE® SERVICES
OPTIMIZE ASSEMBLIES,
REDUCE UNPLANNED
DOWNTIME, WITH
LOCTITE® SERVICES.
HOW WE CAN HELP
LOCTITE® Services include line audits, plant surveys, inventory
assessments, and in-person and online training to make your design,
production and maintenance processes much more efficient.
01. 02.
design & assembly maintenance repair & overhaul
• Design guides • Repair guides
• Line surveys • Plant surveys
• In-plant seminars • Maintenance Reliability Workshops
• Support through the developmental cycle • Inventory consolidation
services.loctite.com
3 N O R T H A M E R I C A N P R O D U C T C ATA L O G
A LOCTITE® Territory Sales Engineer conducting a plant survey.
LOCTITE® SERVICES 4
THREAD
LOCKERS
5 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Traditional fastening
methods have gaps.
Threadlockers
fill them.
PROBLEM SOLUTION
6
THREADLOCKERS
Tighten your
operation.
Eliminate
loosening.
Threadlockers lock and seal your threaded
assemblies, protecting against vibration,
corrosion and galling. But depending on
your need, you have to choose the right
Threadlocker and consider strength, form
and removability. Which one will you
need? LOCTITE® makes your choice easy.
ST R E N GT H & D I SAS S E M B LY
From heavy equipment and permanent assemblies to mounting bolts and adjustment screws, LOCTITE® has your Threadlocker.
FORM T E M P E R AT U R E R E S I S TA N C E
Threadlockers come in a variety of different forms ranging from liquid, LOCTITE® Threadlockers are formulated to withstand extreme
which flow smoothly into gaps and spaces, to semi-solid, a no-drip, temperatures for continuous service from application to removal.
no-mess formulation ideal for overhead applications. Knowing your
application will help you select the correct Threadlocker.
7 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
Form: Liquid
BEST SELLER
Form: Liquid
LOCTITE® THREADLOCKERS 8
THREADLOCKERS
your application
243™ 248™
General Purpose No-drip, No-mess
High Strength
290™
LOCTITE 263
® ™ Wicking Grade
LOCTITE® 268™
LOCTITE® 277™ Disassembly: Removable
with hand tools
Form: Liquid
Temperature Resistance:
300°F
Viscosity: 40 cP
Breakaway Torque: 90/260 in.- lbs.
Fixture Speed: 20 minutes
Full Cure: 24 hours
Low Strength
THREADLOCKERS
222MS™
General Purpose
Disassembly: Removable
with hand tools
Form: Liquid
Temperature Resistance:
300°F
9 N O R T H A M E R I C A N P R O D U C T C ATA L O G
High Strength
THREADLOCKERS
LOCTITE SERVICES
STOP FASTENER
FAILURE BEFORE IT
HAPPENS.
services.loctite.us
10
THREADLOCKERS
Surface Equipment
Preparation THREADLOCKERS
THREADLOCKERS
SF 7070™
Cleaner
NEW LOCTITE® Pro LOCTITE® Dual
IDH 231562
Pump Handheld Channel Integrated
A general purpose parts cleaner
formulated for metals and plastics. Dispenser Reservoir
The product is able to remove most IDH 1390321/ 1390322
oils, greases, lubrication fluids, metal IDH 2564842
cuttings and dries residue free. This dispenser combines a dual channel
Our all-new easy to use, light-weight,
dispense controller and reservoir. It provides
durable applicator that allows for precision
two timing channels controlling two pneumatic
application of Threadlockers, retaining
outputs, such as dispense valves, advancing
compounds and thread sealants.
slides, or any other pneumatic device. Well
suited for medium to high viscosity (>3,000 cP)
SF 7649™ adhesives.
Primer
IDH 209715
11 N O R T H A M E R I C A N P R O D U C T C ATA L O G
THREADLOCKERS
Breakaway Torque/
Viscosity Fixture
IDH Thixotropic Prevail Torque, Temperature
Product Pack Size Color Features (cP) Time
Number (yes/no) M10 Steel Nuts and Range
20 RPM (min)
Bolts (N/m, in.- lbs.)
LOW STRENGTH
135333 10 ml
Small screw, general 6/4 N/m, -65°F to 300°F
222MS™ Purple
purpose
1,200 Yes
53/30 in.- lbs. (-55°C to 150°C)
20
135334 50 ml
MEDIUM STRENGTH
1329467 50 ml
General Purpose 26/5 N/m, -65°F to 360°F
243™ Blue
Primerless
2,150 Yes
230/40 in.- lbs. (-55°C to 180°C)
10
1329505 250 ml
826034 9g
Easy application -65°F to 300°F
248™ Blue
semisolid stick
Semi-solid - 23/200 N/m
(-55°C to 150°C)
5
462476 19 g
135392 50 ml
Post application 10/29 N/m, -65°F to 300°F
290™ Green
wicking capability
40 No
90/260 in.- lbs. (-55°C to 150°C)
20
135393 250 ml
HIGH STRENGTH
1330585 50 ml
33/33 N/m, -65°F to 360°F
263™ Red General Purpose 500 No
290/290 in.- lbs. (-55°C to 180°C)
10
1330335 250 ml
826036 9g
Easy application -65°F to 300°F
268™ Red
semisolid stick
Semi-solid - 10/90 N/m
(-55°C to 150°C)
5
826035 19 g
88448 50 ml
Ideal for large bolts 32/32 N/m, -65°F to 300°F
277™ Red
with coarse threads
7,000 Yes
280/280 in.- lbs. (-55°C to 150°C)
45
88449 250 ml
12
LOCTITE® 243™ THREADLOCKER
13 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Keeping a Wind
Generator
Operating Safely
“Thanks to our LOCTITE Engineering Solutions
Expert, we don’t have to worry about corrosion
or catastrophic fastener failure.”
A wind farm erecting its first wind threads and clean the steel
generator wanted to insure that fasteners. They then inserted the BENEFITS
LOCTITE® 243™ Threadlocker:
the bolts attaching the blade to blade into the main hub applied
• Fills the gaps between threads to
the hub maintained the designed LOCTITE® 243™ Threadlocker to prevent movement between the
torque and were protected from the fasteners, torqued the blade to nut and bolt
the corrosion that can occur with hub assembly to specification and • Eliminates vibrational loosening,
maintaining the original fastener
exposure to the elements. The mounted the hub to the generator torque and insuring safe operation
ideal solution was LOCTITE® 243™ drive system. Now, with corrosion • Prevents corrosion that makes
disassambly difficult
Threadlocker, which helps prevent free fasteners that maintain
catastrophic failure by resisting clamp load, and that are easily
vibrational loosening, preventing disassembled at a predictable
thread corrosion and maintaining break loose torque, the wind farm
fastener torque in the wing to hub is assured of safe, maintenance-
assembly. A LOCTITE® Engineering free wind turbine operation until
Solutions Expert helped the team scheduled downtime.
remove the protective shipping
covers from the exposed bolt
14
THREAD
SEALANTS
15 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Leaks cause downtime.
Liquid thread sealants
prevent them.
PROBLEM SOLUTION
16
THREAD SEALANTS
S U B S T R AT E
There are two types of threads to consider. The National Pipe Taper Thread sealants are available in a variety of forms, from liquid to
(NPT) seal, most widely used in the United States and Canada, paste to solid. Each is suited to different applications. Liquids are
which requires a lower strength thread sealant for disassembly. The ideal for flowing into gaps in threaded connections. Pastes and
British Standard Pipe Taper (BSPT), more common in other countries, solids are best for overhead applications where it’s necessary to
requires a higher strength thread sealant in order to seal the prevent drips, or an instant seal is needed.
connection properly.
17 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
567™
General Purpose Paste
Substrate: Metal
BEST SELLER
545™
Hydraulic and Pneumatic Fittings
Substrate: Metal
18
THREAD SEALANTS
LOCTITE® 545™
Viscosity: 540,000 Thixotropic Viscosity: 15,000 cP
LOCTITE® 561™
Temperature Resistance: 400°F Temperature Resistance: 300°F
LOCTITE® 5452™
Plastic
LOCTITE® MR 5438™
561™ 5452™
No-drip, No-mess Hydraulic/Pneumatic,
Fast Cure
Thread Type: Tapered and Straight Thread Type: Coarse and Fine
Substrate: Plastic
SEE OUR FULL LINE OF
THREAD SEALANTS: Thread Type: Tapered and Straight
Viscosity: 100,000 cP
Temperature Resistance: 300°F
19 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Surface Preparation Equipment THREAD SEALANTS
THREAD SEALANTS
SF 7070™ SF 7649™
Cleaner Primer
IDH 231562 IDH 209715
THREAD SEALANTS
Breakaway
IDH Viscosity mPa·s, Thixotropic
Product Pack Size Features Color Temperature Range Torque Steel
Number 20 RPM [cP] (yes/no)
M10 [N/m]
METAL
-65°F to 300°F
545™ 135486 50 ml Pneumatic hydraulic sealant, no fillers Purple 15,000* No
(-55°C to 150°C)
2
-65F to 300F
561™ 463973 19 g Easy application, general purpose White Semi-solid -
(-55°C to 150°C)
6
PLASTIC
*20 RPM
**M10 Black Oxide
**3/8 x16 Zinc Phosphate
LOCTITE SERVICES
20
LOCTITE® 567 PST™ THREAD SEALANT
21 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Putting a Stop
to Leaking
Fittings
“LOCTITE helped us reduce downtime and labor costs
with a better, longer-lasting solution.”
A compressor service company The LOCTITE® Engineering
serving the natural gas production, Solutions Expert showed the BENEFITS
LOCTITE® 567 PST™ Thread Sealant:
processing, and transportation team how to clean the fittings,
• Provides lubrication to prevent
industry faced an increasing apply LOCTITE® 567 PST™ to the thread galling on NPT fittings
number of leaks on NPT fittings. leading threads, and properly • Has sufficient locking strength to
Pipe dopes and PTFE tapes lacked tighten. Immediately, the fittings maintain a complete seal during
transport and operation
sufficient sealing properties, and were sealed up to 1000 psi, and • Has significantly lowered rework
tapes might loosen and leak during the company’s large natural gas costs associated with equipment
fitting leaks
equipment operation. And both compressors will run leak-free until
options still meant downtime and the system is disassembled for
high labor costs to rework fittings. required maintenance, lowering
A product is needed that seals operating costs.
NPT fittings and prevents thread
galling during assembly. LOCTITE®
567 PST™ Thread Sealant, which
prevents thread galling and has
high locking strength to prevent
leaks, was an ideal alternative.
22
GASKETING
PRODUCTS
23 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Cut gaskets
leak. We seal.
PROBLEM SOLUTION
24
GASKETING PRODUCTS
Liquid gaskets
hold up better.
For longer
lasting seals.
To provide a leak-free seal over a long
period of time, gaskets must fill voids
and be resistant to liquids and/or
gases, while withstanding the operating
temperatures and pressures to which
they are subjected. LOCTITE® offers a
range of gasketing products designed for
any flange type, gap size or material.
FLANGE TYPE
25 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
518™ Pen
No-drip, No-mess
BEST SELLER
SI 5910™
High Adhesion
26
GASKETING PRODUCTS
your application
518™ 518™ Pen
General Purpose No-drip, No-mess
Color: Brown
Viscosity: 2,000,000 cP
Temperature Resistance: 1,500°F
Cure Method: Heat
Stamped Flange
GASKETING PRODUCTS
SI 5699™ SI 5900™
Chemical Resistant Instant Seal
27 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Surface Preparation Equipment
GASKETING PRODUCTS GASKETING PRODUCTS
SF 790™ SF 7649™
Part Cleaner Primer
IDH 135544 IDH 209715
GASKETING PRODUCTS
IDH Pack Max Gap Fill Viscosity [cP] Thixotropic Temperature Fixture Time
Product Color Features
Number Size Unprimed 20 RPM (yes/no) Range [min] Steel
RIGID MACHINED FLANGES
135474 50 ml
High Temperature 0.01 in. -65°F to 400°F
510™ Opaque Pink
Applications (0.25 mm)
90,000** Yes
(-55°C to 200°C)
25
234225 250 ml
Viscosity* cPs
IDH Pack Temperature
Product Color Feature (Mpas) or Extrusion Tack Free Time (min)
Number Size Range
Rate** g/min
STAMPED OR FLEXIBLE FLANGES
743912 90 ml Excellent oil resistance, high adhesion, high joint -67°F to 392°F
SI 5900™ Black
movement, excellent in water/glycol
30 g/min**
(-55°C to 200°C)
15
743913 190 ml
28
LOCTITE® 518™ LIQUID GASKETING
29 N O R T H A M E R I C A N P R O D U C T C ATA L O G
A Costly 5%
Leakage Rate
Eliminated
“A high leakage rate was causing warranty claims and
production delays. LOCTITE’s Engineering Solutions
Expert helped us completely eliminate the problem.”
A manufacturer of cast iron curing, and easy disassembly. A
gear boxes and geared motors LOCTITE® Engineering Solutions BENEFITS
experienced a 5% leakage rate Expert showed the plant’s team LOCTITE® 518™ Gasket Sealant:
using a competitor’s liquid gasket how to clean flange surfaces and • Seals more effectively, eliminating
leakage during operation
on the adapter assembly flange. dispense LOCTITE® 518™ in a
• Sustains low pressure testing of
This was costly due to both continuous bead. Immediately 40 psi immediately upon assembly
leakage-related warranty claims on following assembly, LOCTITE® 518™ • Easily disassembles with a small
amount of cleavage force
purchased units and testing and fills the gaps between the flange
production delays caused by the surfaces and the products can be
slow cure rate. The competitive instantly pressure tested to 40 psi.
product also made it difficult Leaks have now been eliminated
to disassemble and repair the and disassembly is easier for
gearbox. LOCTITE® 518™ Gasket customers.
Sealant was an ideal solution,
offering a complete seal, quick
30
RETAINING
COMPOUNDS
31 N O R T H A M E R I C A N P R O D U C T C ATA L O G
LOCTITE® retaining
compounds secure
components.
For strong reliable
assemblies.
PROBLEM SOLUTION
32
R E TA I N I N G C O M P O U N D S
High loads
high strength
products
Retaining compounds secure bearings,
keyways and cylindrical parts into housings
or onto shafts, forming strong assemblies.
LOCTITE® retaining compounds offer
an effective and economical method
to eliminate challenges like loosening,
corrosion, backlash and wearing by
unitizing the assembly and providing
uniform stress distribution.
GAP SIZE
T E M P E R AT U R E R E S I STA N C E STRENGTH
Most LOCTITE® retaining compounds are able to withstand A high-strength retaining compound is recommended for applications
temperatures of 300° - 355°F. However, certain chemistries that do not need to be disassembled or require extremely high torsional
are available that withstand temperatures up to 450°F for loads. If parts need to be taken apart for maintenance, a lower strength
assemblies which see higher service temperatures. product should be used to aid in disassembly.
33 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
638™
High Strength, Slip Fit
BEST SELLER
660™
Badly Worn Assemblies
34
R E TA I N I N G C O M P O U N D S
GAP SIZE
Temperature Resistance: Temperature Resistance:
300°F 300°F
Gap Size Up To 0.006 in.
Strength: 2,300 psi Strength: 1,700 psi
LOCTITE® 648™
LOCTITE® 641™ Cure Speed: 24 hours Cure Speed: 24 hours
LOCTITE® 609™ Fixture Time: 10 minutes Fixture Time: 20 minutes
Temperature Resistance:
355°F
Gap Size 0.010 to 0.020 in.
LOCTITE® 660™ Strength: 3,900 psi
620™ 638™
High Temperature General Purpose
Temperature Resistance:
Temperature Resistance:
450°F
355°F
35 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Equipment RETAINING COMPOUNDS
ADDITIONAL EQUIPMENT
Bond-A-Matic® 3000
Dispenser
LOCTITE® Dual NEW LOCTITE® Pro IDH 209685/218323
Channel Integrated Pump Handheld
Reservoir Dispenser Pneumatic Handheld
IDH 2564842
IDH 1390321/ 1390322 Applicator
Our all-new easy to use, light-weight, IDH 88643
This dispenser combines a dual channel
durable applicator that allows for precision
dispense controller and reservoir. It provides
application of threadlockers, retaining
two timing channels controlling two
pneumatic outputs, such as dispense valves,
compounds and thread sealants in
50/250 ml botles.
Stationary Applicator Valve
advancing slides, or any other pneumatic IDH 88644/88645
device. Well suited for medium to high
viscosity (>3,000 cP) adhesives.
Surface Preparation
RETAINING COMPOUNDS
SF 7070™ SF 7649™
Cleaner Primer
IDH 231562 IDH 209715
A general purpose parts cleaner formulated Designed to promote the curing speed
for metals and plastics. The product is able to of LOCTITE® anaerobic adhesives and
remove most oils, greases, lubrication fluids, sealants without any significant loss of
metal cuttings and dries residue free. joint strength. Especially recommended
for applications with passive metals or
inert surfaces and with large bond gaps.
R E TA I N I N G C O M P O U N D S
Compressive
Fixture
IDH Pack Viscosity Thixotropic Shear Strength, Temperature
Product Color Feature Time
Number Size [cP] (yes/ no) Steel to Steel, psi Range
(min)
(N/mm2)
GAP SIZE – UP TO 0.006 in.
135512 50 ml 2,300 psi -65°F to 300°F
609™ Green Press fit, low visocisty 120 No
(15 N/mm2)
10
(-54°C to 150°C)
135513 250 ml
1835920 50 ml High strength, high temperature resistance. 3,900 psi -65°F to 355°F
648™ Green
Can be applied to slightly oily surfaces
500 No
(27 N/mm2)
3
(-54°C to 180°C)
1835918 250 ml
GAP SIZE – 0.006 TO 0.010 in.
135514 50 ml 3,800 psi -65°F to 450°F
620™ High strength, high temperature resistance 8,000 No
(26 N/mm2)
60
(-54°C to 230°C)
135515 250 ml
Green
1835936 50 ml High strength, high temperature resistance, 4,500 psi -65°F to 355°F
638™ Can be applied to slightly oily surfaces
2,500 No
(31 N/mm2)
4
(-54°C to 180°C)
1835925 250 ml
GAP SIZE – 0.010 TO 0.020 in.
36
L O C T I T E ® 6 3 8 ™ R E TA I N I N G C O M P O U N D
37 N O R T H A M E R I C A N P R O D U C T C ATA L O G
A 5 Day
Repair
Reduced
to 8 Hours
“We not only minimized our plant downtime
on this repair, we also reduced the likelihood
of future repairs and downtime.”
A loose, spinning bearing had A LOCTITE® Engineering
damaged a large fan shaft Solutions Expert provided BENEFITS
at a cement manufacturer. training on this new repair LOCTITE® 638™ Retaining Compound:
Hardfacing and machining the method, and in just 8 hours, • Allows maintenance personnel to
make efficient, in-plant repairs
shaft would have taken five maintenance personnel cleaned
• Reduces downtime
days of downtime, and it could and removed the main bearing, • Prevents future damage and
have led to future weakening applied LOCTITE® 638™ to the maintains long-term repair viability
and damage from distortion and shaft, slipped the bearing into
fretting corrosion. The solution: the proper position and the fan
LOCTITE® 638™ Retaining was up and running.
Compound. It fills voids, prevents
fretting corrosion and evenly
distributes high load stress.
38
INSTANT
ADHESIVES
39 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Fast, lightweight,
multi-material
bonding.
For more
design options.
PROBLEM SOLUTION
40
I N S TA N T A D H E S I V E S
Bonds more
material. Faster.
Instant adhesives are ideal for bonding
small to medium-size parts with close
fitting, smooth surfaces. They provide fast
cure speeds and excellent bond strengths
to a wide variety of substrates. LOCTITE®
instant adhesives are available in a
range of formulations for anything from
general purpose repairs to specialty high-
performance assembly applications.
GENERAL PURPOSE – Strong and versatile enough for the vast HIGH TEMPERATURE – For applications where speed, gap filling
majority of applications, including acidic surfaces such as chromated and high temperature, humidity and vibration resistance are required.
or galvanised metals and porous substrates such as wood, paper, LOW ODOR/LOW BLOOM – Low volatile adhesives for applications
leather, cork and fabric. where cosmetic appearance, minimal frosting and low odor are required.
TOUGHENED – Elastomer modified adhesives for applications HIGH GAP FILL – For applications with gaps up to 0.2 inches.
subjected to high shock, impact and humidity.
LIGHT CURE – Designed to cure very rapidly upon exposure to
FLEXIBLE – For bonding materials subjected to bending or UV/visible light of the proper intensity.
distortion, as well as flexible components, and acidic surfaces.
Available in viscosities from thin liquids to Available in various fixture speeds to Available in shear resistant, general purpose
thixotropic, no-run gels. accommodate applications that may require formulations to toughened, high impact, high
instant set times to those that may require peel resistant formulations to meet the specific
minor adjustment time. strength requirements of your application.
41 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
401™
Fast, Medium Viscosity
Viscosity: 100 cP
BEST SELLER
454™
No-Run Gel
Viscosity: Gel
42
I N S TA N T A D H E S I V E S
your application
401™ 406™
Medium Viscosity Wicking Grade
Toughened
LOCTITE® 435™
LOCTITE® 480™
454™ 495™
No-Run Gel Low-Medium Viscosity
Light Cure
LOCTITE® 4310™
LOCTITE® 4311™
404™
Rubber Bonding
Viscosity: 90 cP
43 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Toughened Low Odor / Low Bloom
INSTANT ADHESIVES INSTANT ADHESIVES
Fixture Speed: 30-45 seconds Fixture Speed: 90 seconds Fixture Speed: 30 seconds Fixture Speed: 20 seconds
Full Cure: 24 hours Full Cure: 24 hours Full Cure: 24 hours Full Cure: 24 hours
Strength: 2,700 psi Strength: 3,800 psi Strength: 2,950 psi Strength: 3,200 psi
Color: Clear Color: Black Color: Pale Yellow to Colorless Color: Colorless to Straw
Temperature Resistance: 212°F Temperature Resistance: 212°F Temperature Resistance: 175°F Temperature Resistance: 175°F
4204™ 3092™
High Viscosity Two-component Gel
* Dependent upon gap size - Stated at 0.2" gap, aluminum ** Faster fixture times can be achieved with light cure
44
I N S TA N T A D H E S I V E S
Surface Preparation
INSTANT ADHESIVES
LOCTITE® Dual
PU20 Benchtop Channel Integrated
Peristaltic Dispenser Reservoir
IDH 2265279 IDH 1390321/ 1390322
The LOCTITE® EQ PU20 Digital Peristaltic Dispenser is This dispenser combines a dual channel
a reliable and effective volumetric dispenser for single- dispense controller and reservoir. It provides
component, low viscosity adhesives. It is great for precise two timing channels controlling two pneumatic
dosing or applications that require a specific flow rate. outputs, such as dispense valves, advancing
slides, or any other pneumatic device. Well
suited for medium to high viscosity (>3,000 cP)
adhesives.
ADDITIONAL EQUIPMENT
45 N O R T H A M E R I C A N P R O D U C T C ATA L O G
I N S TA N T A D H E S I V E S
GENERAL PURPOSE
20 gm
135429 0.005 in. 2900 psi -40°F to 250°F
401™ 135430
Clear 100
(0.15 mm)
5
(20 N/mm²) (-40°C to 121°C)
1 lb
135436 20 gm
0.004 in. 2250 psi -40°F to 250°F
406™ Clear 20
(0.12 mm)
30
(15.5 N/mm²) (-40°C to 121°C)
237295 1 lb
GENERAL MAINTENANCE
TOUGHENED
840057 20 gm
0.006 in. 2700 psi -40°F to 212°F
435™ Clear 200
(0.18 mm)
30-45
(18.5 N/mm²) (-40°C to 100°C)
840071 1 lb
135466 20 gm
0.006 in. 3800 psi -40°F to 212°F
480™ Black 200
(0.18 mm)
90
(26 N/mm²) (-40°C to 100°C)
234048 1 lb
FLEXIBLE
HIGH TEMPERATURE
17544 20 gm
Slightly pale yellow/ 0.008 in. 2400 psi -40°F to 250°F
4204™ colorless
4000
(0.24 mm)
120
(16.5 N/mm²) (-40°C to 121°C)
231944 1 lb
135433 20 gm
0.008 in. 2950 psi -40°F to 175°F
403™ Pale yellow to colorless 1200
(0.24 mm)
30
(20.3 N/mm²) (-40°C to 80°C)
233675 1 lb
135463 20 gm
0.004 in. 3050 psi -40°F to 175°F
460™ Colorless to straw 40
(0.12 mm)
20
(21 N/mm²) (-40°C to 80°C)
234020 1 lb
LIGHT CURE
1 oz
Light yellow-green to 0.005 in. 2950 psi -40°F to 212°F
4310™ 1401792
dark blue-green liquid
180
(0.15 mm)
25*
(20.3 N/mm²) (-40°C to 100°C)
1lb
1401791 1 oz
Light yellow-green to 0.008 in. 3050 psi -40°F to 212°F
4311™ dark blue-green liquid
1000
(0.24 mm)
30*
(21 N/mm²) (-40°C to 100°C)
1401789 1lb
LOCTITE SERVICES
46
L O C T I T E ® 4 0 1 ™ I N S TA N T A D H E S I V E
47 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Improved
Appearance,
Durability and
Production Speed
“LOCTITE® helped make our signs more aesthetically
pleasing and stronger while enabling us to ship more
product faster.”
The thick bond lines and slow A LOCTITE® Engineering
curing speed of a high-viscosity Solutions Expert showed BENEFITS
RTV used to bond aluminum how just a few small drops of LOCTITE® 401™ Instant Adhesive:
letters to PVC sign boards was LOCTITE® 401™ on each sign • Minimizes gap and improves
aesthetic appeal with thin bond lines
causing aesthetic issues and letter, which was then applied
• Cures fast, maximizing production
delaying production for a retail to the sign board with light output and lowering overall
production costs
sign manufacturer. In addition, hand pressure, allowed the
• Has high bond strength that
letters were sometimes lost due sign company to manufacture eliminates loss of sign letters and
to the low bond strength of the signs more quickly and provide addresses customer complaints
48
UNIVERSAL
BONDERS
49 N O R T H A M E R I C A N P R O D U C T C ATA L O G
HY 4070 and HY 4090. ™ ™
PROBLEM SOLUTION
50
UNIVERSAL BONDERS
BEST SELLER
HY 4070™
Universal Bonder
Ultra Fast Structural Adhesive
Lap Shear
IDH Pack Viscosity Temperature
Product Features Color Gap Fill Mix Ratio Fixture Time Strength,
Number Size [cP] Range
GBMS
2264448 11 gm Transparent
Ultra-fast, multi-substrate 0.2 in. -40°F to 212°F < 60 (aluminum, 3625 psi
HY 4070™ bonder
to Pale
(5 mm)
Gel 10:1
(-40°C to 100°C) 0.05 mm gap) (25 N/mm²)
2494415 45 gm Yellow
Dispenser Nozzles
UNIVERSAL BONDERS UNIVERSAL BONDERS
Universal Dual Cartridge 11 gm 45 gm
Manual Dispenser IDH 1434516 IDH 1509102
45 gm
IDH 267452
51 N O R T H A M E R I C A N P R O D U C T C ATA L O G
52
UNIVERSAL BONDERS
53 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Fast curing adhesives.
For industrial design
solutions.
Create strong and reliable bonds with HY 4090 . ™
BEST SELLER
HY 4090™
Universal Bonder
Fast & Versatile Structural Adhesive
Lap Shear
IDH Pack Viscosity Temperature
Product Features Color Gap Fill Mix Ratio Fixture Time Strength,
Number Size [cP] Range
GBMS
Multi-material
2123350 50 gm
Multi-material bonder; bonder; fast
0.08 in. -40°F to 284°F 2420 psi
HY 4090 ™ fast strength build; good strength build; good
(2 mm)
Gel 1:1
(-40°C to 140°C)
< 180
(17 N/mm²)
environmental resistance environmental
2060035 400 gm
resistance
Multi-material bonder;
0.08 in. -40°F to 284°F 2420 psi
HY 4090™ GY 2205827 50 gm fast strength build; good Grey
(2 mm)
Gel 1:1
(-40°C to 140°C)
< 180
(17 N/mm²)
environmental resistance
Dispensers Nozzles
UNIVERSAL BONDERS UNIVERSAL BONDERS
54
LOCTITE® HY 4090™ UNIVERSAL BONDER
55 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Fast, Durable
Bonding of High
Volume PA and
ABS Components
“LOCTITE had the perfect adhesive solution to help
bring our new product to life.”
A designer and manufacturer battery pack parts with LOCTITE®
of battery packs for electronic SF 7063™ to remove molding BENEFITS
LOCTITE® HY 4090™ Universal Bonder:
devices was designing a new compounds that may inhibit final
• Generates strong, multi-material
product and searching for an bond strengths, then dispense bonds without requiring additional
surface primers
adhesive to bond PA and ABS LOCTITE® HY 4090™ from the
• Provides a fast fixture rate of 3
plastics. The adhesive needed to dual cartridge packaging using minutes that will not impede the
allow for projected production the LOCTITE® manual applicator proposed line speed
line volumes and be resistant equipped with a mixer nozzle. The • Results in assemblies that resist
vibration, temperature changes
to vibration, temperature and hybrid adhesive fixtured in just 3 and attack by high humidity
humidity variances. LOCTITE® minutes, minimizing any potential
HY 4090™, a fast curing universal blooming from exposed fillets of
bonder that provides strong the cyanoacrylate based product,
bonds without primers or other and provided a bond to PA and
surface treatments, was a ABS plastics that withstood
perfect candidate. A LOCTITE® vibration, temperature and
Engineering Solutions Expert humidity variances.
showed them how to clean
56
STRUCTURAL
ADHESIVES
57 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Superior speed,
aesthetics
and strength.
Without the
weight.
PROBLEM SOLUTION
58
STRUCTURAL ADHESIVES
LOCTITE® has a wide range of structural adhesives, from general purpose — strong and versatile enough to cover the majority
of applications, to specialty — formulated for the rare cases where general purpose won’t do.
FIXTURE SPEED S U B S T R AT E
A range of fixture times from ultra fast to slow to meet your process LOCTITE® structural adhesives can bond most materials.
requirements.
59 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
EA E-20HP™
Fast Fixture, High Shear
BEST SELLER
AA 326™
Fast Fixture, Small Gaps, 2-step
60
STRUCTURAL ADHESIVES
Special Substrates
LOCTITE® AA 3035™ LOCTITE® AA H8600™
Magnet Bonding
LOCTITE® AA 331™ LOCTITE® AA 392™
LOCTITE® AA 332™ LOCTITE® AA 326™
LOCTITE SERVICES
Potting
LOCTITE® EA E-30CL™ LOCTITE® EA-40EXP™
LOCTITE® EA E-60NC™
IMPROVE STRENGTH
AND AESTHETICS
IN REDUCED TIME.
services.loctite.us
61 N O R T H A M E R I C A N P R O D U C T C ATA L O G
High Performance STRUCTURAL ADHESIVES
WORK LIFE* < 1 HOUR WORK LIFE* ≥ 1 HOUR
Work Life: 5 minutes Work Life: 20 minutes Work Life: 120 minutes
HEAT CURE
EA E-214HP™
Non Sag, High Shear
62
STRUCTURAL ADHESIVES
Work Life: 5 minutes Work Life: 5 minutes Work Life: 5 minutes Work Life: 25 minutes
Substrate: Aluminum, Ceramic, Substrate: Aluminum, Ceramic, Substrate: Polyolefin Substrate: Galvanized Steel
Concrete, Glass, Metal, Plastic, Concrete, Glass, Metal, Plastic,
Stainless Steel, Steel, Wood Stainless Steel, Steel, Wood
Temperature Resistance: 180°F Temperature Resistance: 250°F
Fixture Speed: 30 minutes Fixture Speed: 160 minutes Color: Pale Yellow Color: Blue
Chemistry: Two-part Acrylic Chemistry: Two-part Acrylic
Magnet Bonding
STRUCTURAL ADHESIVES
THIS PRODUCT REQUIRES THIS PRODUCT REQUIRES THIS PRODUCT REQUIRES THIS PRODUCT REQUIRES
AN ACTIVATOR SF 7387™ AN ACTIVATOR SF 7387™ AN ACTIVATOR SF 7387™ AN ACTIVATOR SF 7649™
Substrate: Metal
Substrate: Metal Substrate: Magnets Substrate: Metal
Potting
STRUCTURAL ADHESIVES
Fixture Speed: 180 minutes Fixture Speed: N/A Fixture Speed: >180 minutes
63 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Equipment
STRUCTURAL ADHESIVES
DISPENSERS
50 ml 50 ml 200 ml 490 ml
Dual Cartridge Dual Cartridge Dual Cartridge 10:1
Applicators Applicators Applicators Pneumatic: IDH 470572
1:1, 2:1, 4:1 10:1 S-Style 1:1, 2:1
Manual: IDH 720228 1:1, 2:1, 4:1 Manual: IDH 218312
Pneumatic: IDH 476898 Manual: IDH 1034026 Pneumatic: IDH 218311
Pneumatic:
IDH 1493310
64
STRUCTURAL ADHESIVES
Shear
IDH Pack Viscosity Fixture Time Temperature
Product Features Color Gap Fill Stength,
Number Size [mPa·s, cP] [min] Resistance
GBMS
GENERAL PURPOSE
Cloudy,
Metal, wood, ferrite, 0.02 in. 3300 psi 32°F to 250°F
AA 330™ 1690727 25 ml kit
ceramic, plastic
colorless to 65,000
[0.5 mm]
4
[23 N/mm²] (0°C to 120°C)
pale yellow
Opaque light
Securing permanent magnets 0.02 in. 3000 psi 32°F to 400°F
AA 332™ 232743 300 ml
in motors
yellow to 100,000
[0.5 mm]
3
[20 N/mm²] (0°C to 200°C)
dark amber
MAGNET BONDING
Excellent environmental
resistance and tolerance to 2300 psi 27 GBMS , 80 pli
AA H4800™ 2061246 490 ml
off-ratio mixing; superior impact
Light yellow 50,000 10:1 30
[16 N/mm²] 72 hr [14 N/mm]
and peel strength; non-sag gaps
65 N O R T H A M E R I C A N P R O D U C T C ATA L O G
STRUCTURAL ADHESIVES - EPOXIES
HIGH PERFORMANCE
237113 50 ml
Bonding, potting, encapsulating 2360 psi -40°F to 250°F
EA E-60NC™ electrical components
Black opaque 8,000 1:1 > 180
[16 N/mm²] (-40°C to 120°C)
237115 400 ml
FAST FIXTURE
Translucent
1600 psi -40°F to 300°F
EA E-00NS™ 233962 50 ml Excellent electrical insulator white to 100,000 1:1 15
[11 N/mm²] (-40°C to 150°C)
yellow paste
1086598 50 ml
Forms ultra clear bond line with Water white 3400 psi -40°F to 250°F
EA E-05MR™ excellent impact resistance clear iquid
25,000 1:1 15
[23 N/mm²] (-40°C to 120°C)
1086599 400 ml
ONE PART
EA 234001 300 ml
Excellent peel resistance and Light grey
Paste One Component N/A
4800 psi -40°F to 350°F
E-214HP™ impact strength paste [33 N/mm²] (-40°C to 175°C)
S T R U C T U R A L A D H E S I V E S - P O LY U R E T H A N E
Shear
IDH Pack Viscosity Fixture Time Temperature
Product Features Color Gap Fill Stength,
Number Size [mPa·s, cP] [min] Resistance
GBMS
66
LOCTITE® E20HP™ STRUCTURAL ADHESIVE
67 N O R T H A M E R I C A N P R O D U C T C ATA L O G
A Long-Lasting
Alternative
to Welding
“LOCTITE® helped us find a solution to constant
spot weld failures that were costing us equipment
downtime and repair costs.”
A paper recycler’s stainless steel washing the screen mesh and
filter screens failed regularly in filter to remove any paper recycling
BENEFITS
LOCTITE® E-20HP™ Structural Adhesive:
service – every 6 to 8 weeks – debris and chemical residues, to
• Provides the needed durability to
due to the erosion of spot welds dispensing from a 50 ml. dual withstand the abrasive forces in the
that caused the mesh to fall into cartridge, to positioning and filter process
the rotating screen system. The weighting the replacement mesh. • Replaces spot welds and holds the
fine filter mesh in place for more
frequent replacement required by The new process has lowered than 16 weeks
these failures caused equipment filter replacement costs, labor • Offers cost savings by reducing
equipment down time and labor costs
downtime and labor costs. repair costs and doubled uptime
LOCTITE® E-20HP™, a structural between process downtime,
adhesive that is resistant to peel thereby increasing recycling
and shear forces, was the perfect production output.
solution. A LOCTITE® Engineering
Solutions Expert walked the team
through the process, from ground
68
FLEXIBLE
ADHESIVES
AND
SEALANTS
69 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Varied substrates.
High elongation.
For joints with
high movement.
PROBLEM SOLUTION
70
FLEXIBLE ADHESIVES AND SEALANTS
Bonding and
sealing for
dynamic loads.
Flexible adhesives and sealants are
ideal for applications that are subjected
to dynamic forces and require durable
adhesion to a variety of substrates.
They fill large gaps and once cured,
their resilient properties provide UV-
resistant, waterproof seals and strong
bonds that withstand high tensile and
impact forces, as well as cold and hot
temperature cycles, where substrates
expand and contract at different rates.
PA I N TA B I L I T Y T E M P E R AT U R E CURE SPEED
SMP*-based adhesives and sealants are The operating temperature requirements Two-component flexible adhesive and
paintable immediately after application, of your end device may have an impact on sealants provide fast cure times, while
while silicone-based adhesives and sealants which flexible adhesive and sealant is best one-component products rely on ambient
are not compatible with paint. suited for your application. moisture and require longer times to cure.
71 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
TEROSON® MS 939NA™
Primerless, Multi-purpose Adhesive
Paintability: Yes
BEST SELLER
TEROSON® MS 930NA™
Primerless Sealant/Adhesive
Paintability: Yes
72
FLEXIBLE ADHESIVES AND SEALANTS
Equipment
FLEXIBLE ADHESIVES AND SEALANTS
ADDITIONAL EQUIPMENT
400 ml
Dual Cartridge Dispenser
Manual: IDH 218312
Pneumatic: IDH 218311
73 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Flexible Sealants
Temperature Resistance: 450° F Temperature Resistance: 450° F Temperature Resistance: 175° F Temperature Resistance: 212° F
Cure Speed: 24 hours Cure Speed: 24 hours Cure Speed: 24 hours Cure Speed: 24 hours
Tack-Free Time: 30 min. Tack-Free Time: 30 min. Skin Over Time: 25 min. Skin Over Time: 35 min.
Color: Clear Color: Black Color: White, Grey, Black Color: Black Paste
Cure Method: Moisture Cure Method: Moisture Cure Method: Moisture Cure Method: Moisture
Tensile Strength: 200 psi Tensile Strength: 200 psi Tensile Strength: 200 psi Tensile Strength: 200 psi
FLEXIBLE ADHESIVES
Lap Shear
Extrusion Skin Over Tensile Elongation
IDH Pack Temperature Shore Strength
Product Color Features Rate Technology Time Strength at Break
Number Size Range Hardness on Steel
[g/min] [minutes] [psi] [%]
[psi]
Primerless, good UV/
TEROSON 2068378 290 ml Black
weather resistance,
20
Silane Modified
5
-40°F to 212°F
A 55 400 500 270
MS 939NA™ paintable, solvent/ Polymer (-40°C to 100°C)
isocyanate-free
TEROSON MS 2081197 50 ml Non-sag, high tack, Silane Modified -40°F to 212°F
White NA 30 A 55 400 150 270
9399™ 2081666 400 ml fast set time Polymer (-40°C to 100°C)
FLEXIBLE SEALANTS
193996 80 ml Good resistance to
LOCTITE® Black
extreme thermal and UV
100 Silicone 30
-65°F to 450°F
A 20 200 300 NA
SI 593™ cycling without hardening, (-55°C to 232°C)
193997 300 ml shrinking or cracking
74
LOCTITE® TEROSON® MS 930™ FLEXIBLE ADHESIVE
75 N O R T H A M E R I C A N P R O D U C T C ATA L O G
A Single Flexible
Option to Replace
Other Elevator
Door Fasteners
“LOCTITE® reduced our elevator door production
time and cost, while improving product quality.”
Manufacturers of elevators simplify the assembly process.
and elevator components have Another manufacturer designing BENEFITS
discovered that LOCTITE® a new elevator door jamb learned LOCTITE® Teroson® MS 930™
Flexible Adhesive:
Teroson® MS 930™ Flexible how to use LOCTITE® Teroson®
• Silane modified polymer
Adhesive allows them to replace MS 930™ to replace a competitor’s technology that meets all local
health and safety requirements
everything from other adhesives adhesive tape that required a
• Disperses joint load distribution
to welded connections with a flammable solvent primer to apply, over the entire flange versus spot
single solution that performs better resulting in improved plant safety weld contact points
and is faster, easier and safer to and increased production output. • Reduces plant power consumption
compared to welding
apply. A LOCTITE® Engineering Both manufacturers substantially
• Does not deform the metal surface
Solutions Expert helped one reduced materials cost as well. and eliminates refinishing required
after welding operations
elevator door manufacturer
• Improves plant safety by
replace spot welding operations eliminating flammable solvent
for internal door supports with primer
76
LIGHT CURE
ADHESIVES
77 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Strength.
Transparency.
Rapid curing.
For faster
process speeds.
PROBLEM SOLUTION
78
LIGHT CURE ADHESIVES
Excellent
bonding. Fast
processing.
Light cure adhesives are ideal for
applications requiring fast production
speeds and are commonly used in the
assembly of glassware, loudspeakers,
optical instruments, electrical
components, and disposable medical
devices. To help select the best product
for your application, key considerations
include the ability of the assembled
parts to transmit the UV/visible light to
the bond line, whether a rigid or flexible
bond line is required, and the types of
substrates being bonded.
BOND TYPE S U B S T R AT E
79 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
AA 3953™
Ultra Fast, Plastic Bonding, Medium Viscosity
Bond: Flexible
BEST SELLER
AA 3494™
Glass Bonding
Bond: Semi-rigid
80
LIGHT CURE ADHESIVES
your application
AA 3961™ AA 3951™
Ultra Fast, Tack-Free, Ultra Fast, Plastic Bonding,
Low Viscosity Low Viscosity
Transparent Substrates
LOCTITE® AA 3922™
Bond: Rigid Bond: Flexible
LOCTITE® AA 3951™
LOCTITE® AA 3953™ Substrate: Metals, Plastics, Substrate: Plasticized PVC,
Stainless Steel, Polycarbonate, TPEs, Thermoset Rubbers,
LOCTITE® AA 3961™ Polycarbonate, ABS, Acrylic,
ABS, Acrylic, HDPE, PP
LOCTITE® AA 3963™ HDPE, PP
LOCTITE® AA 3494™ Chemistry: Acrylic
Viscosity: 80 cP Chemistry: Acrylic
LOCTITE® AA 3462™ Viscosity: 150 cP
Compliant with ISO 10993: Yes
Fluorescence: Yes Compliant with ISO 10993: Yes
Color: Transparent, Colorless to Straw Fluorescence: Yes
Color: Transparent, Colorless to Straw
Opaque Substrates
LOCTITE® 4310™
LOCTITE® 4311™
LOCTITE® SI 5031™
AA 3922™ AA 3963™
General Purpose, Ultra Fast, Tack-Free,
LOCTITE® SI 5039™ Medium Viscosity Medium Viscosity
LOCTITE® AA 352™
Opaque Substrates
LIGHT CURE ADHESIVES
HAVE A UNIQUE
APPLICATION? 4310™ 4311™
SEE THE FULL LINE: Ultra Fast, Low Viscosity Ultra Fast,
Medium Viscosity
light-cure.loctite.us
Bond: Rigid Bond: Rigid
81 N O R T H A M E R I C A N P R O D U C T C ATA L O G
AA 3953™ AA 3494™ AA 3462™
Ultra Fast, Plastic Bonding, Glass Bonding Glass Bonding,
Medium Viscosity Environmental Resistant
Substrate: Metal, Glass Substrate: Glass, Metal, Ceramic Substrate: Glass, Metal, Ceramic
82
LIGHT CURE ADHESIVES
83 N O R T H A M E R I C A N P R O D U C T C ATA L O G
LIGHT CURE ADHESIVES
TRANSPARENT SUBSTRATES
Translucent,
Ultraviolet (UV)/ Glass, metals, coated -65°F to 300°F 680 psi
AA 3462™ 2248420 1 liter colorless to light
visible light metals
12,000
(-54°C to 149°C)
NA
[5 N/mm²]*
yellow liquid
312057 25 ml
Transparent to hazy Ultraviolet (UV)/ -65°F to 300°F 3400 psi
AA 3922™ liquid visible light
Stainless steel 300
(-54°C to 149°C)
D 66
[23 N/mm²]
312054 1 liter
135413 50 ml
Transparent light Ultraviolet (UV) light & -65°F to 300°F 1200 psi
AA 352™ amber liquid Activator Cure
Metal and glass 20,500
(-54°C to 149°C)
D 60
[8 N/mm²]*
135412 25 ml
Light yellow, Ultraviolet (UV)/ Plastics, Rubbers. -65°F to 400°F 0.1 psi
SI 5031™ 693986 300 ml
translucent liquid visible light & Moisture Metals
5,500
(-54°C to 200°C)
A 34
[10 N/mm²]**
Light yellow, Ultraviolet (UV)/ Plastics, Rubbers. -65°F to 350°F 345 psi
SI 5039™ 742348 300 ml
translucent paste visible light & Moisture Metals
220 g/min
(-54°C to 180°C)
A 34
[2.4 N/mm²]**
* PC to Glass
**PC to PC Lap Shear
84
LOCTITE® 4311™ LIGHT CURE ADHESIVE & LOCTITE® 770™ PRIMER
85 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Light Cure
Bonding Process
Improves
Product Quality
and Output.
“LOCTITE’s Engineering Solutions Expert helped us design
a new production process that met all of our requirements
and improved our quality and output.”
An ink cartridge remanufacturer Expert, the team redesigned their
was having trouble finding a assembly process by brushing BENEFITS
product that passed their adhesion LOCTITE® 770™ Primer onto LOCTITE® 4311™ Light Cure Adhesive:
and pressure test requirements. the ABS part, then dispensing • Cures completely in several
seconds beneath the LOCTITE®
They had previously tested another LOCTITE® 4311™ onto the bond 7411 UV™ Flood System
adhesive alternative but it had poor area using the existing LOCTITE® • Meets all manufacturing
requirements without additional
bond strength to ABS and failed 200D Benchtop Robot and curing capital investment
pull tests. The solution: LOCTITE® it with exposure to the LOCTITE®
LOCTITE® 770™ Primer:
4311™ Light Cure Adhesive, 4311™ light source for several
• Increases the bond strength
which dispenses precisely and seconds. The new process bonded of LOCTITE® 4311™ to pass all
strength requirements
cures quickly, and LOCTITE® well, passed repeated pull tests and
770™ Primer. With the help of a improved ink cartridge quality and
LOCTITE® Engineering Solutions production output.
86
CLEANERS
87 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Over 60 years of
experience with cleaners
and degreasers.
For safe, effective
cleaning.
PROBLEM SOLUTION
88
CLEANERS
Clean parts,
hands and
mechanical
equipment
LOCTITE® cleaners and degreasers
provide highly effective water- and
solvent-based cleaning of components,
worktops, floors, parts and hands.
The major factors to consider are drying
time, residue, odor and substrate
compatibility.
For removing dirt, resins, metal filings, lacquer, oils and greases Available with and without abrasives for removing dirt, grease,
from components. grime, oil and adhesives from hands.
89 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
SF 790™
Cleaner
BEST SELLER
SF 7070™ Cleaner
ODC-Free Cleaner/Degreaser
90
CLEANERS
Hand Cleaners
LOCTITE® SF 7617™ SF 7840™ SF 790™
Water-based Parts Cleaner
SF 768™
Clean-Up Solvent
Hand Cleaners
SEE OUR FULL LINE OF
CLEANING PRODUCTS: SF 7617™
cleaners.loctite.us Wipes
91 N O R T H A M E R I C A N P R O D U C T C ATA L O G
CLEANERS
DEGREASERS
PART CLEANERS
SF 768™ 235018 1.75 fl. oz. < 30 seconds No rinse and no residue Solvent
HAND CLEANER
92
WEAR
PREVENTION
93 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Fight abrasion, erosion,
corrosion, chemical
attack and wear.
For longer, more
efficient performance.
PROBLEM SOLUTION
94
WEAR PREVENTION
Protect. Repair.
Rebuild.
Wear prevention solutions provide
a sacrificial coating on new or worn
surfaces, to provide wear and impact
resistance and extend the life of
parts. LOCTITE® offers a range of
wear prevention solutions for a range
of applications.
PA R T I C L E A B R A S I O N FLUID EROSION C H E M I C A L AT TA C K
Trowelable, brushable and sprayable Coatings to combat the fine particles found Advanced epoxy products to protect
solutions for fighting abrasion from particles in fluids on components such as a pump. equipment from extreme chemical attack
ranging from small to large. and corrosion.
95 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
PC 7218™
General Purpose
BEST SELLER
PC 9313™
Impact Resistance
96
WEAR PREVENTION
your application
PC 7218™ PC 7222™
Particle Abrasion General Purpose Flexible
LOCTITE PC 7218
® ™ Working Life: 30 minutes Working Life: 30 minutes
Cure Speed: 7 hours Cure Speed: 5 hours
LOCTITE® PC 9599™ Temperature (max): 250°F Temperature (max): 220°F
LOCTITE® PC 9313™ Color: Thick Grey Paste Color: Grey Paste
LOCTITE® PC 7317™
LOCTITE® PC 7383™
LOCTITE® PC 7222™
Fluid Erosion
LOCTITE® PC 7227™
PC 9313™ PC 7317™
LOCTITE® PC 7255™ Impact Resistant Fine Particles <1.5mm
PC 7383™
Flexible PC 9599™
Fast Cure
Working Life: 50 minutes
Cure Speed: 24 hours Working Life: 10-15 minutes
Temperature (max): 176°F Cure Speed: 3 hours
Color: Black Temperature (max): 220°F
Color: Thixotropic Blue Paste
97 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Fluid Erosion Chemical Attack
WEAR PREVENTION WEAR PREVENTION
Working Life: 34 to 48 minutes Working Life: 40 to 70 minutes Working Life: 28 to 40 minutes Working Life: 40 minutes
Cure Speed: 24 hours Cure Speed: 4 hours Cure Speed: 36 hours Cure Speed: 4 hours
Temperature (max): 200°F Temperature (max): 203°F Temperature (max): 250°F Temperature (max): 250°F
Color: Grey Color: Brilliant Green Color: Grey Liquid Color: Blue Liquid
WEAR PREVENTION
Maximum Working Functional Mix Mix
IDH Package Compressive Shore
Product Coverage Color Operating Time Cure [hrs.] Ratio by Ratio by
Number Size Strength Hardness
Temperature [min.] 77°F (25°C) Volume Weight
PARTICLE ABRASION
0.63 m² @ 6 mm 176°F
PC 7383™ 2395759 10 kg kit
thick per 5 kg kit
Black
[80°C]
NA 90 50 24 1:1 1:1
FLUID EROSION
CHEMICAL ATTACK
LOCTITE SERVICES
PROTECT COMPONENTS
AND EXTEND
OPERATIONAL LIFE.
services.loctite.us
98
LOCTITE® NORDBAK™ HIGH IMPACT WEARING COMPOUND
99 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Coating against
fluid erosion.
Thanks to a LOCTITE® Engineering Solutions Expert,
reliability and performance has been improved.
An industrial pump repair shop maximum adhesion and longevity.
needed to improve reliability and To fill large gaps in the pump BENEFITS
performance for a customer’s caused by cavitation and erosion, LOCTITE® EA 3478™ Superior
municipal wastewater pumps, LOCTITE® EA 3478™ Superior Metal and LOCTITE® PC 7255™
Sprayable Ceramic
which were failing prematurely Metal was used to rebuild the
• Fills large gaps caused by
due to erosion and cavitation. pump geometry, followed by the cavitation and erosion.
During an on-site consultation, a application of LOCTITE® PC 7255™
• Coats and protects wetted
LOCTITE® Technical Sales Engineer Sprayable Ceramic to coat and components.
suggested LOCTITE® EA 3478™ protect all wetted components in • Increases mean time
Superior Metal and LOCTITE® the pump. Once back in service, between failure.
PC 7255™ Sprayable Ceramic to the pump’s mean time between • Allows for more regular operation
repair damage and protect the failures was greatly increased, and maintenance schedules
100
REBUILDING
101 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Repair shafts and
other steel, aluminum
or rubber components.
For longer life and
better chemical
resistance.
PROBLEM SOLUTION
102
REBUILDING
Rebuilding
damaged parts.
Rebuilding solutions can be used
to repair rubber, steel, aluminum
and other metal components. Metal
rebuilding solutions offer high
compressive strength and can be
machined, drilled or tapped after cure.
Rubber repair solutions offer excellent
abrasion resistance and outstanding
adhesion to metal and rubber.
D A M A G E D M E TA L PA R T D A M A G E D R U B B E R PA R T
Trowelable or kneadable solutions for repairing, restoring or Durable, tough and flexible repairs of conveyor belts and other
rebuilding damaged metal machinery, equipment and parts damaged rubber equipment and parts, quickly and easily.
without the need for heat or welding.
103 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
EA 3478™
High Performance
LOCTITE® EA 3478™ is a 2-part, ferro-silicon filled epoxy resin
system. It is extremely resistant to corrosion, chemical attack and
abrasion. Helps to restore tolerances to worn shafts, repairing worn
keyways and damaged housings, filling pitted surfaces in worn
machinery and restoring fit to bearing housings.
BEST SELLER
PC 7350™
Rubber Repair
A premium rubber repair compound designed for conveyors
and other rubber parts. Offers excellent abrasion resistance
and outstanding adhesion to metal and rubber.
104
REBUILDING
105 N O R T H A M E R I C A N P R O D U C T C ATA L O G
B E LT R E P A I R
Functional
Package Tensile Shore A Working Time
Product IDH Number Coverage Color % Elongation Cure [hrs.]
Size Strength Hardness (min.)
77°F / 25°C
RUBBER REPAIR
REBUILD EXPOXIES
Compressive Functional
Package Tensile Shore
Product IDH Number Coverage Color Strength Working Time Cure [hrs.]
Size Strength [psi] Hardness
[psi] 77°F / 25°C
STICK
TROWELABLE
LOCTITE SERVICES
RESTORE COMPONENT
INTEGRITY.
services.loctite.us
106
LOCTITE® EA 3478™, PC 7227™, SF 7611™
107 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Restoring Worn
Metal to its
Near-original
Dimensions.
“We went from replacing 2 impellers a year to almost
never replacing impellers, thanks to LOCTITE®.”
A water treatment plant with 25 a bare metal surface, a LOCTITE® re-coating during the next
mixer impellers was searching Engineering Solutions Expert downtime can be scheduled.
for a way to avoid the high cost showed the team how to first The result: the plant has
of OEM replacement parts. The clean with LOCTITE® SF 7611™ eliminated almost all impeller
plant was replacing at least 2 Pro Strength Parts Cleaner replacement costs while reducing
impellers each year at a cost of to remove any oil or grease downtime expenses substantially.
$6,000 per unit, plus the cost residues and apply LOCTITE®
of renting a crane to remove EA 3478™ Superior Metal to
the impellers. They had tried restore eroded surfaces to a BENEFITS
competitive wear resistant near-original surface dimension, LOCTITE® EA 3478™ Superior Metal:
coatings previously, but they grinding the cured product as • Restores impeller original dimensions
to improve pumping efficiency.
failed after only a few months needed to optimize impeller
of use. LOCTITE® EA 3478™ efficiency. Finally, a primary LOCTITE® PC 7227™ Brushable Ceramic:
• Protects metal from abrasion to
Superior Metal and LOCTITE® coat of LOCTITE® PC 7227™
prolong impeller service life.
PC 7227™ Brushable Ceramic Brushable Ceramic blue was
were an ideal solution for applied, followed by a top coat of
restoring the impellers. After the the same material in gray. As the
impellers were removed from gray coating wears away and the
service and grit blasted to leave blue shows through,
109 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Long-lasting
lubrication.
For longer
component
life and
performance.
PROBLEM SOLUTION
110
LUBRICANTS
Keep moving
parts moving.
Lubricants can be used for everything
from releasing seized parts to providing
long-lasting lubrication of moving
parts. LOCTITE® offers lubricants that
can address and protect against a wide
range of temperature, pressure and
thermal stability needs.
111 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
LB 8034™
Synthetic Grease
IDH 457456 – 3 oz.
LOCTITE® LB 8034 is a high-performance synthetic grease that
provides long life protection for equipment exposed to a wide
range of temperature, pressure and cycle times. Use as a lubricant
and protective anti-rust film on bearings and machine parts, or as
a release agent on gaskets and seals.
BEST SELLER
LB 8040™
Seized, Rusted Parts
IDH 2343777 – 400 ml.
LOCTITE® LB 8040™ is the solution for releasing seized or corroded
parts. Instantly freezes seized and rusted parts (bolts, nuts, studs)
down to -38°F. The shock-freeze causes microscopic cracks in the
layer of rust, allowing the lubricating ingredient to wick directly into
the rust. Dismantles parts in 1-2 minutes.
BEST SELLER
LB 8421™
Gear, Chain and Cable Lubricant
IDH 1906177 – 12 oz.
LOCTITE® LB 8421 is a solvent-based, oily lubricant spray that foams
up when applied, protecting and prolonging the life of parts exposed
to harmful or corrosive elements. The foaming action permits fast,
deep penetration with reduced run-off. Typically used on equipment
with gears, chains, cable and wire rope.
112
ANTI-SEIZE
PRODUCTS
113 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Prevent seizing.
Even in extreme
environments.
PROBLEM SOLUTION
114
ANTI-SEIZE
Keep assemblies
from seizing.
Anti-seize lubricants are used in harsh
environments to keep assemblies from
seizing. They also protect against rust,
corrosion and galling even in extreme
temperature conditions. Temperature
is a key consideration when choosing
a LOCTITE® anti-seize lubricant,
along with substrate material and
contamination restrictions.
LOCTITE® anti-seize lubricants are designed to protect your equipment from a wide range of temperatures,
which allows for a wide range of applications. To choose the right anti-seize lubricant, choose the conditions
in which your equipment operates, from -20°F to 2400°F.
M E TA L F R E E
LOCTITE® METAL-FREE FORMULATIONS – A growing concern for all types of industries is the dispersal of “heavy”
metals like lead, nickel, zinc and others, into the environment. Metal-free formulations offer the same performance as
traditional products without heavy metals.
115 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
LB 8008™
Copper-based
Metal Free: No
BEST SELLER
LB 771™
Nickel-based
Metal Free: No
116
ANTI-SEIZE
your application
LOCTITE LOCTITE
LB 8150™ LB 8008™
Silver Copper
Up to 1600° F
Temperature Range: Temperature Range:
LOCTITE® LB 8150™ -20°F to 1600°F -20°F to 1800°F
Up to 2400°F
LOCTITE® LB 771™
LOCTITE® LB 8809™
LOCTITE® LB 8023™
Up to 2400°F
ANTI-SEIZE PRODUCTS
LOCTITE LOCTITE
LB 771™ LB 8009™
Nickel High Performance/
Heavy Duty
Temperature Range:
-20°F to 2400°F Temperature Range:
-20°F to 2400°F
Metal Free: No
Metal Free: Yes
Color: Silver
Solid Lubricating Agent: Nickel/Graphite Color: Grey
Solid Lubricating Agent: Graphite/
Calcium Fluoride
Color: Black
Solid Lubricating Agent: Calcium
Sulfonate
117 N O R T H A M E R I C A N P R O D U C T C ATA L O G
ANTI-SEIZE PRODUCTS
UP TO 1600°F (870°C)
UP TO 1800°F (980°C)
UP TO 2400°F (1315°C)
118
SPECIALTY
MAINTENANCE
TECHNOLOGIES
119 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Solutions for
any situation.
Even
unexpected
ones.
120
S P E C I A LT Y M A I N T E N A N C E T E C H N O L O G I E S
For a wide
range of
specialized
maintenance
and repair
scenarios.
With deep expertise in industrial
maintenance and repair, LOCTITE®
has been able to develop a wide
range of technologies suitable for
solving nearly situation.
PIPE REPAIR SYSTEM GROUTING & RUST PREVENTION & WELDING PROTECTION
Composite repair system CONCRETE REPAIR CONVERSION Protects welding equipment
to repair and protect Self-leveling, non-shrinking Stabilizes existing rust, guards against metal spatter for 8
metal pipes. grouting that is stronger than against corrosion, prevents hours without reapplication.
concrete, and chemical and electrochemical corrosion and
corrosion resistant. provides protection against
flash rust.
121 N O R T H A M E R I C A N P R O D U C T C ATA L O G
BEST SELLER
PC 7210™/PC 5085™
Pipe Repair System
BEST SELLER
PC 9410™
Magna-Crete Concrete Repair
122
S P E C I A LT Y M A I N T E N A N C E T E C H N O L O G I E S
PC 7210™ PC 5085™
Toughened Epoxy Glass-carbon Fiber Tape
Grouting & Concrete Repair IDH 2079209 IDH 2081663
LOCTITE® PC 9626™
LOCTITE® PC 9410™ Toughened epoxy resin paste used in Composite fabric used in
combination with LOCTITE® PC 5085™, a combination with resins, as a
glass-carbon fiber tape, as a composite composite repair system to repair
repair system. It can be used where and protect metal pipes where high
Insulating & Sealing high strength, corrosion protection and strength, corrosion protection or
chemical resistance is required. chemical resistance is required.
LOCTITE® SI 5075™
Welding Protection
LOCTITE® SF 7900™
Construction Adhesive
PC 9626™ PC 9410™
LOCTITE® PowerGrab Adhesive Deep Pour Grout Magna-Crete Concrete Repair
IDH 235637 IDH 235573
Tool Kits
LOCTITE® Quick Service Toolkit Insulating & Sealing
LOCTITE® Toolbox
SI 5075™
Silicone Wrap
IDH 1540599
123 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Rust Prevention & Conversion Replace or Repair
O-Ring Seals
Amber, water-based, liquid surface Converts existing rust (rust required) into a O-Ring Making Kit
treatment that delivers 48-hour stable base. Cured product acts as a primer IDH 228171
protection against flash rust on large ready for painting with oil or solvent-based
surfaces. Straightforward spray and paint. Protects surface from corrosion. Eliminates the need for an inventory of different
wipe application. Use on metal pipes, valves, fittings, outside sized O-rings. Joints resist water and oil and are
surfaces of storage tanks, fences, guardrails, as strong as the rubber itself.
wrought iron furniture, conveyors, and
construction and agricultural equipment.
SF 7900™
Ceramishield
IDH 1616692 PowerGrab® Adhesive LOCTITE® Quick
Innovative ceramic coating that protects
Industrial Grade
IDH 2137678
Service Toolkit
welding equipment against metal spatter IDH 302892
for eight hours without reapplication.
A single-component, off-white, heavy duty, high This compact kit contains everything needed to
Minimizes equipment cleaning and
strength, construction grade adhesive for interior solve the most common mechanical failures.
eliminates downtime, reducing cost and
and exterior repairs or building projects.
enhancing productivity.
Spray Adhesive
LOCTITE® Toolbox
IDH 618144
MR 5426™ Containing the best LOCTITE® technologies to
Maximum Strength
IDH 476035 solve some of the most common mechanical
problems, this kit has everything a professional
A high-strength, high temperature (up to 170°F/77°C) spray adhesive needs to increase reliability at the base
designed for bonding foam, carpet, fabrics, plastics, rubber, etc. This component level.
is due to the high strength and temperature resistance of the product.
It’s resistant to extreme seasonal temperatures, is water resistant and
dries clear.
124
NOZZLES
STRUCTURAL BONDING
EPOXIES / POLYURETHANES
Product Image IDH Number Cartridge Size Pacakge Qty. Description
ACRYLICS
125 N O R T H A M E R I C A N P R O D U C T C ATA L O G
LIGHT CURE TIPS
1/2" HIGH PRECISION STAINLESS STEEL DISPENSE TIPS - HELICAL THREAD
Product Image IDH Number Pacakge Qty. Hub Color Gauge
600974 50
Amber 15
900675 1000
567209 50
Green 18
600976 1000
600977 50
Pink 20
600978 1000
601003 50
Purple 21
601007 1000
600979 50
Blue 22
600982 1000
806854 50
Orange 23
806855 1000
601000 50
Red 25
601001 1000
569713 50
Lavender 30
506201 1000
TAPERED DISPENSE TIPS - 1 1/4" POLYETHYLENE TAPERED TIPS, HELICAL THREAD & UV LIGHT BLOCK ADDITIVE
Product Image IDH Number Pacakge Qty. Hub Color Gauge
600941 50
White 14
600947 1000
600951 50
Grey 16
600955 1000
600957 50
Green 18
600958 1000
600959 50
Pink 20
600971 1000
600972 50
Blue 22
600973 1000
862838 50
Red 25
862837 1000
862834 50
Clear 27
862831 1000
126
INDEX BY IDH NUMBER INDEX BY IDH NUMBER
Product Package Product Package
IDH No. Product Name Page No. IDH No. Product Name Page No.
No. Size No. Size
17544 4204™ LOCTITE® 4204™ Instant Adhesive 20 g 44, 46 231232 SI 5910™ LOCTITE® SI 5910™ RTV Silicone 300 ml 27, 28
88448 277™ LOCTITE® 277™ Threadlocker 50 ml 10, 12 11, 20, 36,
231562 SF 7070™ LOCTITE® SF 7070™ ODC-Free Cleaner 15 oz. 45, 92
88449 277™ LOCTITE® 277™ Threadlocker 250 ml 10, 12
231944 4204™ LOCTITE® 4204™ Instant Adhesive 1 lb. 44, 46
135266 SF 770™ LOCTITE® SF 770™ Primer 1.75 oz. 45
232743 AA 332 ™
LOCTITE® AA 332™ Adhesive 300 ml 63, 65
135270 SI 5699™ LOCTITE® SI 5699™ RTV Silicone 300 ml 27, 28
232853 AA 392™ LOCTITE® AA 392™ Adhesive 25 ml 63, 65
135275 SI 5699™ LOCTITE® SI 5699™ RTV Silicone 70 ml 27, 28
233317 LB 8008 ™
LOCTITE® LB 8008™ Copper-based Anti-seize 1 lb. 117, 118
135333 222MS™ LOCTITE® 222MS™ Threadlocker 10 ml 9, 12
233675 403™ LOCTITE® 403™ Instant Adhesive 1 lb. 44, 46
135334 222MS™ LOCTITE® 222MS™ Threadlocker 50 ml 9, 12
233962 EA E-00NS™ LOCTITE® EA E-00NS™ Adhesive 50 ml 61, 66
135392 290™ LOCTITE® 290™ Threadlocker 50 ml 9, 12
234001 EA E-214HP™ LOCTITE® EA E-214HP™ Adhesive 300 ml 62, 66
135393 290™ LOCTITE® 290™ Threadlocker 250 ml 9, 12
234020 460 ™
LOCTITE® 460™ Instant Adhesive 1 lb. 44, 46
135402 AA 326™ LOCTITE® AA 326™ Adhesive 50 ml 63, 65
234048 480™ LOCTITE® 480™ Instant Adhesive 1 lb. 44, 46
135412 AA 352™ LOCTITE® AA 352™ Light Cure Adhesive 50 ml 91, 94
234138 AA 3494™ LOCTITE® AA 3494™ Light Cure Adhesive 1L 82, 84
135413 AA 352™ LOCTITE® AA 352™ Light Cure Adhesive 1L 91, 94
234202 LB 8008 ™
LOCTITE® LB 8008™ Copper-based Anti-seize 1 lb. 117, 118
135429 401™ LOCTITE® 401™ Instant Adhesive 20 g 42, 43, 46
234225 510™ LOCTITE® 510™ Flange Sealant 250 ml 27, 29
135430 401™ LOCTITE® 401™ Instant Adhesive 1 lb 42, 43, 46
116, 117,
135433 403™ LOCTITE® 403™ Instant Adhesive 20 g 44, 46 234248 LB 771 ™
LOCTITE LB 771 Nickel Anti-seize
® ™
1 lb. 118
135436 406™ LOCTITE® 406™ Instant Adhesive 20 g 44, 46 234263 LB 8008™ LOCTITE® LB 8008™ Copper-based Anti-seize 8 oz. 117, 118
135462 454™ LOCTITE® 454™ Instant Adhesive 20 g 42, 43, 46 234347 LB 8009™ LOCTITE® LB 8009™ Heavy Duty Anti-seize 9 oz. 117, 118
135463 460™ LOCTITE® 460™ Instant Adhesive 20 g 44, 46 234941 SF 7611™ LOCTITE® SF 7611™ Parts Cleaner 19 oz. 91, 92
135465 404™ LOCTITE® 404™ Instant Adhesive 0.33 oz. 43, 46 234981 SF 754™ LOCTITE® SF 754 ™Rust Treatment 1 qt. 124
135466 480™ LOCTITE® 480™ Instant Adhesive 20 g 44, 46 235005 LB 8150™ LOCTITE® LB 8150™ Silver Grade Anti-seize 1 lb. 111, 112
135467 495™ LOCTITE® 495™ Instant Adhesive 1 oz. 43, 46 235018 SF 768™ LOCTITE® SF 768™ Clean-up Solvent 1.75 oz. 45, 92
135474 510™ LOCTITE® 510™ Flange Sealant 50 ml 27, 28 116, 117,
235028 LB 771™ LOCTITE® LB 771™ Nickel Anti-seize 8 oz. 118
135486 545™ LOCTITE® 545™ Thread Sealant 50 ml 19, 20
235573 PC 9410 ™
LOCTITE PC 9410 Concrete Repair
® ™
5 gal. 123
135507 SI 596™ LOCTITE® SI 596™ RTV Silicone 80 ml 27, 28
LOCTITE® PC 9599™ Fast Cure Wearing
135512 609™ LOCTITE® 609™ Retaining Compound 50 ml 35, 36 235599 PC 9599 ™
Compound 6 lb kit 97, 98
135513 609™ LOCTITE® 609™ Retaining Compound 250 ml 35, 36 235637 PC 9626™ LOCTITE® PC 9626™ Deep Pour Grout 5 gal. 123
135514 620™ LOCTITE® 620™™ Retaining Compound 50 ml 35, 36 237095 EA E-00CL™ LOCTITE® EA E-00CL™ Adhesive 50 ml 61, 66
135515 620™ LOCTITE® 620™ Retaining Compound 250 ml 35, 36 237099 EA E-05CL™ LOCTITE® EA E-05CL™ Adhesive 50 ml 63, 66
135527 660™ LOCTITE® 660 Retaining Compound 50 ml 34, 36 237106 EA E-90FL™ LOCTITE® EA E-90FL™ Adhesive 400 ml 62, 66
116, 117, 237107 EA E-20HP™ LOCTITE® EA E-20HP™ Adhesive 50 ml 60, 66
135543 LB 771™ LOCTITE® LB 771™ Nickel Anti-seize 1 lb. 118
237109 EA E-20HP™ LOCTITE® EA E-20HP™ Adhesive 400 ml 60, 66
135544 SF 790 ™
LOCTITE SF 790 Parts Cleaner
® ™
18 oz. 28, 92
237110 EA E-60HP™ LOCTITE® EA E-60HP™ Adhesive 50 ml 62, 66
116, 117,
160796 LB 8008™ LOCTITE® LB 8008™ Copper-based Anti-seize 1 lb 118 237113 EA E-60NC™ LOCTITE® EA E-60NC™ Adhesive 50 ml 63, 66
160809 SI 595™ LOCTITE® SI 595™ RTV Silicone – Clear 80 ml 74 237115 EA E-60NC™ LOCTITE® EA E-60NC™ Adhesive 400 ml 63, 66
193996 SI 593™ LOCTITE® SI 593™ RTV Silicone – Black 80 ml 74 237116 EA E-30CL™ LOCTITE® EA E-30CL™ Adhesive 50 ml 63, 66
193997 SI 593™ LOCTITE® SI 593™ RTV Silicone – Black 300 ml 74 237118 EA E-30CL™ LOCTITE® EA E-30CL™ Adhesive 400 ml 63, 66
193999 SI 595™ LOCTITE® SI 595™ RTV Silicone – Clear 300 ml 74 237127 UK U-05FL™ LOCTITE® UK U-05FL™ Adhesive 400 ml 63, 66
198817 SI 596™ LOCTITE® SI 596™ RTV Silicone 300 ml 27, 28 237128 EA E-120HP™ LOCTITE® EA E-120HP™ Adhesive 50 ml 62,66
199012 LB 8150™ LOCTITE® LB 8150™ Silver Grade Anti-seize 8 oz. 117, 118 237130 EA E-120HP™ LOCTITE® EA E-120HP™ Adhesive 400 ml 62,66
209676 PC 7317™ LOCTITE® PC 7317™ Pneu–Wear 25 lb kit 97, 98 237295 406™ LOCTITE® 406™ Instant Adhesive 1 lb 44, 47
209681 EA 3463™ LOCTITE® EA 3463™ Epozy Repair Putty 4 oz.. 105, 106 261797 UK U-05FL™ LOCTITE® UK U-05FL Adhesive 50 ml 63, 66
11, 20, 275026 LB 8023™ LOCTITE® LB 8023™ Marine Grade Anti-seize 16 oz. 117, 118
209715 SF 7649™ LOCTITE® SF 7649™ Primer 4.5 oz. 28, 36
299175 LB 8023™ LOCTITE® LB 8023™ Marine Grade Anti-seize 8 oz. 117, 118
209758 LB 8009™ LOCTITE® LB 8009™ Heavy Duty Anti-seize 18 oz. 117, 118
Quick
209816 PC 7319 LOCTITE® PC 7319™ Chemical Resistant Coating 11 lb. 97, 98 302892 Service LOCTITE® Quick Service Tool Kit Kit 124
Tool Kit
209822 EA 3478 ™
LOCTITE EA 3478 Superior Metal
® ™
1 lb. kit 105, 106
312054 AA 3922™ LOCTITE® AA 3922™ Adhesive 1L 81, 84
209824 PC 7317™ LOCTITE® PC 7317™ Pneu-Wear 3 lb. kit 97, 98
312057 AA 3922™ LOCTITE® AA 3922™ Adhesive 25 ml 81, 84
209826 PC 7227™ LOCTITE® PC 7227™ Brushable Ceramic 2 lb. 98
337637 SF 7617™ LOCTITE® SF 7617™ WIPES 75 count 91, 92
209827 PC 7222™ LOCTITE® PC 7222™ Wear Resistant Putty 3 lb. kit 97, 98
411833 AA H8000™ LOCTITE® AA H8000™ Adhesive 490 ml 62, 65
219298 EA E-90FL ™
LOCTITE® EA E-90FL™ Adhesive 50 ml 62, 66
428557 PC 7393™ LOCTITE® PC 7393™ Rapid Rubber Repair 400 ml 105, 106
O-Ring
228171 LOCTITE® O-Ring Making Kit Kit 124
Making Kit LOCTITE® LB 8034™ High Performance Synthetic
457456 LB 8034™ Grease 3 oz. 112
229769 SF 7452™ LOCTITE® SF 7452™ Accelerator 1.75 oz. 45
462476 248 ™
LOCTITE 248 Threadlocker Stick
® ™
19 g 9, 12
231121 641™ LOCTITE® 641™ Retaining Compound 50 ml 35, 36
127 N O R T H A M E R I C A N P R O D U C T C ATA L O G
INDEX BY IDH NUMBER INDEX BY IDH NUMBER
Product Package Product Package
IDH No. Product Name Page No. IDH No. Product Name Page No.
No. Size No. Size
463973 561™ LOCTITE® 561™ Thread Sealant Stick 19 g 19, 20 2046048 SF 7840™ LOCTITE® SF 7840™ Cleaner & Degreaser 5 gal. 92
476035 MR 5426™ LOCTITE® MR 5426™ Spray Adhesive 16.72 oz. 124 2060835 AA H8600™ LOCTITE® AA H8600™ Adhesive 400 ml 63, 65
500995 LB 8008™ LOCTITE® LB 8008™ Copper-based Anti-seize 1 lb 117, 118 2061246 AA H4800™ LOCTITE® AA H4800™ Adhesive 490 ml 62, 65
544370 LB 8008™ LOCTITE® LB 8008™ Copper-based Anti-seize 16 oz. 117, 118 2068378 MS 939NA™ TEROSON MS 939NA™ Elastic Adhesive – Black 290 ml 72, 74
544371 LB 8008™ LOCTITE® LB 8008™ Copper-based Anti-seize 8 oz. 117, 118 2069997 MS 939™ TEROSON MS 939 ™Elastic Adhesive – White 290 ml 72, 74
555336 LB 8008™ LOCTITE® LB 8008™ Copper-based Anti-seize 8 oz. 117, 118 2073202 PC 7350™ LOCTITE® PC 7350™ Coonveyor Belt Repair 400 ml 105, 106
618144 Toolbox LOCTITE® Toolbox Toolbox 124 2079209 PC 7210™ LOCTITE® PC 7210™ Pipe Repair Epoxy 1 kg 123
693986 SI 5031™ LOCTITE® SI 5031™ Light Cure Adhesive 300 ml 82, 84 2081197 MS 9399™ TEROSON MS 9399™ Elastic Adhesive 50 ml 73, 74
742348 SI 5039™ LOCTITE® SI 5039™ Light Cure Adhesive 300 ml 82, 84 2081663 PC 5085™ LOCTITE® PC 5085™ Glass Carbon Fiber Tape 30 m 123
743912 SI 5900™ LOCTITE® SI 5900 ™Instant Gasket 90 ml 27, 28 2081666 MS 9399™ TEROSON MS 9399™ Elastic Adhesive 400 ml 73, 75
743913 SI 5900™ LOCTITE® SI 5900™ Instant Gasket 190 ml 27, 28 LOCTITE® PC 7266™ Sprayable Chemical
2082026 PC 7266™ Resistant Coating 1 kg 98
743914 SI 5900™ LOCTITE® SI 5900™ Instant Gasket 190 ml
2087067 567 ™
LOCTITE 567 Thread Sealant
® ™
50 ml 19, 20
826034 248™ LOCTITE® 248™ Threadlocker Stick 9g 9, 12
2087069 567™ LOCTITE® 567™ Thread Sealant 250 ml 19, 20
826035 268™ LOCTITE® 268™ Threadlocker Stick 19 g 10, 12
2096061 518™ LOCTITE® 518™ Flange Sealant 300 ml 27, 28
826036 268™ LOCTITE® 268™ Threadlocker Stick 9g 10, 12
2096064 518™ LOCTITE® 518™ Flange Sealant 50 ml 27, 28
840057 435 LOCTITE® 435™ Instant Adhesive 20 g 44, 46
LOCTITE® HY 4090™ Universal Structural
840071 435™ LOCTITE® 435™ Instant Adhesive 1 lb. 44, 46 2123350 HY 4090 ™
Adhesive 50 g 54
1057673 AA 331™ LOCTITE® AA 331™ Adhesive 25 ml 63, 65 2137678 Powergrab LOCTITE® POWERGRAB Adhesive 300 ml 124
1086598 EA E-05MR™ LOCTITE® EA E-05MR™ Adhesive 50 ml 61,66 2138430 MS 930NA™ TEROSON MS 930NA™ Elastic Adhesive – White 290 ml 74
1086599 EA E-05MR™ LOCTITE® EA E-05MR™ Adhesive 400 ml 61,66 2138431 MS 930NA™ TEROSON MS 930NA™ Elastic Adhesive – Black 290 ml 74
1265769 5452™ LOCTITE® 5452™ Thread Sealant 50 ml 19, 20 LOCTITE® HY 4090 GY Universal Structural
2205827 HY 4090 GY Adhesive 50 g 54
1265770 5452™ LOCTITE® 5452™ Thread Sealant 250 ml 19, 20
2244127 AA H8003 ™
LOCTITE AA H8003 Adhesive
® ™
490 ml 62, 65
1323940 PC 7218™ LOCTITE® PC 7218™ Wearing Compound 25 lb. kit 97, 98
2248420 AA 3462™ LOCTITE® AA 3462™ Light Cure Adhesive 1L 82, 84
1324008 PC 7218™ LOCTITE® PC 7218™ Wearing Compound 5 lb. kit 97, 98
2264448 HY 4070™ LOCTITE® HY 4070™ Universal Bonder 11 g 51
LOCTITE® PC 9313™ High Impact Wearing
1327836 PC 9313™ Compound 25 lb. kit 97, 98
2298393 AA 3951™ LOCTITE® AA 3951™ Adhesive 25 ml 81, 84
1329467 243™
LOCTITE 243 Threadlocker
® ™
50 ml 8, 9, 12 2298394 AA 3951 ™
LOCTITE® AA 3951™ Adhesive 1L 81, 84
1329505 243™ LOCTITE® 243™ Threadlocker 250 ml 8, 9, 12 2298717 AA 3953™ LOCTITE® AA 3953™ Adhesive 25 ml 82, 84
1330335 263™ LOCTITE® 263™ Threadlocker 250 ml 8, 9, 12 2298718 AA 3953™ LOCTITE® AA 3953™ Adhesive 1L 82, 84
1330585 263™ LOCTITE® 263™ Threadlocker 50 ml 8, 9, 12 LOCTITE® LB 8040™ Fast Acting Corrosion
2343777 LB 8040 ™
Release 400 ml 112
1401789 4311™ LOCTITE® 4311™ Light Cure Adhesive 1 lb. 81, 84
2344218 SF 7625™ LOCTITE® SF 7625™ Rust Converter 10.25 oz. 124
1401790 4310™ LOCTITE® 4310™ Light Cure Adhesive 1 lb. 81, 84
LOCTITE® NS 5550™ Extreme Temperature
1401791 4311 LOCTITE® 4311™ Light Cure Adhesive 1 oz. 81, 84 2374447 NS 5550™ 1 quart 27, 28
™
Sealant
1401792 4310 ™
LOCTITE 4310 Light Cure Adhesive
® ™
1 oz. 81, 84 LOCTITE NS 5540 Extreme Temperature
® ™
2374452 NS 5540™ Sealant 1 pint 27, 28
1511653 EA E-40EXP™ LOCTITE® EA E-40EXP Adhesive 200 ml 63, 66
2392164 518™ LOCTITE® 518™ Flange Sealant Pen 25 ml 26, 27, 28
LOCTITE® MR 5438™ Threaded Plastic Pipe
1537780 MR 5438™ Sealant 16 oz. 19, 20
2395759 PC 7383™ LOCTITE® PC 7383™ Rubber Repair 10 kg kit 97, 98
1540599 SI 5075™ LOCTITE® SI 5075™ Insulating & Sealing Wrap 1" x 10’ 123 2464890 AA 3961™ LOCTITE® AA 3961™ Adhesive 25 ml 81, 84
1560557 MS 5510™ TEROSON MS 5510™ Elastic Sealant – Black 300 ml 74 2464891 AA 3961™ LOCTITE® AA 3961™ Adhesive 1L 81, 84
1562040 MS 5510™ TEROSON MS 5510™ Elastic Sealant – Clear 300 ml 74 2483476 AA 3963™ LOCTITE® AA 3963™ Adhesive 25 ml 81, 84
1562042 MS 5510™ TEROSON MS 5510™ Elastic Sealant – White 300 ml 74 2483477 AA 3963™ LOCTITE® AA 3963™ Adhesive 1L 81, 84
1562044 MS 5510™ TEROSON MS 5510™ Elastic Sealant – Grey 300 ml 74
1616692 SF 7900™ LOCTITE® 7900™ Ceramic Shield for Welding 9.5 oz 124
1677288 AA 3035™ LOCTITE® AA 3035™ Adhesive 50 ml 63, 65
1690727 AA 330 LOCTITE® AA 330™ Adhesive 25 ml kit 61, 65
1807961 3092 LOCTITE® 3092™ Adhesive 10 g 44, 46
1835918 648™ LOCTITE® 648™ Retaining Compound 250 ml 35, 36
1835920 648™ LOCTITE® 648™ Retaining Compound 50 ml 35, 36
1835925 638™ LOCTITE® 638™ Retaining Compound 250 ml 35, 36
1835936 638™ LOCTITE® 638™ Retaining Compound 50 ml 35, 36
1875841 4902™ LOCTITE® 4902™ Instant Adhesive 20 g 44, 46
1906177 LB 8421™ LOCTITE® LB 8421™ Gear/Chain Lube 12 oz. 112
2012143 PC 7255™ LOCTITE® PC 7255™ Sprayable Cereamic 900 ml 98
2046047 SF 7840™ LOCTITE® SF 7840™ Cleaner & Degreaser 1 gal. 92
128
Notes
129 N O R T H A M E R I C A N P R O D U C T C ATA L O G
Notes
130
Henkel Corporation U.S.A. Canada
Henkel Corporation Henkel Canada Corporation
Engineering Adhesives
Engineering Adhesives Engineering Adhesives
http://www.henkel-adhesives.com One Henkel Way 2515 Meadowpine Blvd.
www.loctite.com Rocky Hill, Connecticut 06067 Mississauga, Ontario L5N 6C3
Tel: 1.800.LOCTITE (562.8483) Tel: 1.800.263.5043 (within Canada)
Tel: 860.571.5100 Tel: 905.814.6511
Fax: 860.571.5465 Fax: 905.814.5391
All marks used are trademarks and/or registered trademarks of Henkel and/or its affiliates in the U.S. and elsewhere. ® registered in the U.S. Patent and Trademark Office.
©2020 Henkel Corporation. All rights reserved. DSGN0008373/LT-8513 (9/2020)