Professional Documents
Culture Documents
CHSEMS-PPE Requirement
CHSEMS-PPE Requirement
CHSEMS-PPE Requirement
8
Contractor Health, Safety & environmental Management System (C-HSE MS)
ConocoPhillips Indonesia Page 30 of 35
Refer to PPE Procedure (ID-G-BU-00000-00000-00417) and Standing Order Work Coverall Determination (No. COPI-HS-SO-00002 dated 16 October 2015.
Applicability (Y)
Body (completed by
No Activities Potential Hazards PPE Standards Reference Remarks
Part(s) Contract Owner
consult with HSE)
Long-sleeved fire-retardant Distinctive color (e.g. red, yellow,
coveralls EN 533 and ANSI/ISEA orange) is recommended.
Flash fire Whole body Yes
107-1999
(c/w reflective stripes) COPI coveralls is RED
ANSI Z89.1-1987, Type Hard hats shall be completed with chin
Falling objects Head Hard Hats Yes
1, Class E & G straps for working at height
ANSI Z41.1 or DIN
Safety shoes, or 4843 ASTM F 2413-
Falling/sharp
MINIMUM PPE for GENERAL Foot and leg Safety boots (for potential 05 and F 2412-05, Yes
1 objects
ACTIVITIES *) ankle injury) CSA-Z195-02, EN ISO
20344:2004
- For personnel wearing reading
glasses, an approved prescription
ANSI Z87.1- 2003 or safety glasses is required. The use of
Impact from flying Safety glasses (c/w side over fit safety glasses/goggles over
Eyes DIN EN 166-167, AS Yes
particles shields) the safety glasses is acceptable.
1337
- Dark lenses safety glasses shall not
be worn at night or indoor areas.
Working in noisy environment (also Ear muff or Ear plug
Excessive noise > OSHA 29 CFR 1926.52
2 refer to ID-G-BU-00000-00000- Ear (may be combined with NRR value minimum 24 dB Yes
82 dBA or ANSI S3.19-1974
00414 – Hearing Conservation) communication head set)
Light duty general works (e.g.,
Lightweight, Tight-fitting cotton cloth with
3 laboring, brick laying, paving, Hands Yes
Slippery objects nitrile/ PVC dots
manual handling)
Handling rough/abrasive materials,
Mid to heavyweight, Combination of heavy-duty
mid to heavyweight materials (e.g.,
4 rough/abrasive Hands thick cotton with nitrile Used in conjunction with no. 13, 14, 15 Yes
scaffolding, powered tools, manual
objects coated or with leather
handling)
Welding - electric arc, gas
Hot sparks and Specialized leather gauntlet
5 cutting, torch brazing, torch Hands Used in conjunction with no. 16 NO
molten metal (long gloves)
soldering
Policy/Plan/Program: D-G-BU-00000-00000-00362 Rev.8
Contractor Health, Safety & environmental Management System (C-HSE MS)
ConocoPhillips Indonesia Page 31 of 35
Applicability (Y)
(completed by
Body
No Activities Potential Hazards PPE Standards Reference Remarks Contract Owner
Part(s)
consult with
HSE)
Handling sharp objects (e.g.,
glazing, sheet metal, steel
Metal-mesh, kevlar, or other
6 erection, cladding/roof works, Sharp objects Hands Yes
special materials
cutting in meat/poultry
applications)
Food handling/processing (e.g.,
Tight-fitting plastic-film
7 cooking, food Hand contamination Hands NO
gloves
handling/preparations)
Assembly operations where a
high level of manual dexterity is
Tight-fitting, fingerless Only to be used where potential injury to
8 required (e.g., mechanical and Hand injury Hands NO
gloves fingers is very minimal.
finishing trades, electrical and
instrumentation assembly).
Handling heat/cold materials Aluminized fabric or other For firefighting gloves,
(e.g., firefighting, chemicals, Exposure to extreme special insulated materials refer to NFPA 1971-
9 Hands Yes
laboratory works, process heat/cold gloves or gauntlets (long 2000 or equivalents
sampling) gloves) (e.g. CE/EN443-1997)
Exposure to
hazardous chemical
Rubber, PVC, vinyl, nitrile,
such as caustic, Always refer to MSDS prior to selecting
neoprene or other special
10 Chemical handling acids, corrosive, the appropriate chemical resistant gloves Yes
materials gauntlets (long
cleansers/solvent, for the chemical being handled.
gloves)
and petroleum
products
Electrical insulated gloves, ASTM D 120-87
High-voltage electricity (also refer made up of rubber and worn
Electrical shock and
11 ID-G-BU-00000-00000-00379 – underneath leather gloves ASTM F 1117-1993 NO
burns
Electricity) ANSI Z89.1-Class E
Footwear, Hard hats
Particulate respirator shall not be used
ANSI Z88.2 and for rescue, emergency work, or in any
Dust, dirt, solid Respiratory
Particulate respirator/mask NIOSH 42 CFR 84 or atmosphere containing gases/vapors Yes
particles system
DIN 3179 that could be IDLH - use APR or
Working in environment with SCBA/SABA instead (see no. 18 and 19)
airborne contaminant (also refer
12 ID-G-BU-00000-00000-00476 – Welding respirator shall not be used for
Respiratory Protection Procedure) ANSI Z88.2 and rescue, emergency work, or in any
Respiratory atmosphere containing gases/vapors
Welding fume Welding respirator/mask NIOSH 42 CFR 84 or NO
system that could be Immediately Dangerous to
DIN 3179
Life and Health (IDLH) - use APR or
SCBA/SABA instead (see no. 18 and 19)
Policy/Plan/Program: D-G-BU-00000-00000-00362 Rev.8
Contractor Health, Safety & environmental Management System (C-HSE MS)
ConocoPhillips Indonesia Page 32 of 35
Applicability (Y)
(completed by
Body
No Activities Potential Hazards PPE Standards Reference Remarks Contract Owner
Part(s)
consult with
HSE)
Air Purifying Respirators (APR) shall not
ANSI Z88.2 and be used for rescue, emergency work, or
Half mask Air Purifying
Working in environment with Respiratory in any atmosphere that could be
Toxic gases/vapors Respirators - with canisters NIOSH 42 CFR 84 or Yes
airborne contaminant (also refer system Immediately Dangerous to Life and
or cartridges filter DIN 3179
ID-G-BU-00000-00000-00476 – Health (IDLH) - use SCBA/SABA instead
12
Respiratory Protection (see no. 19)
Procedure) Full face mask Air Purifying ANSI Z88.2 and
Toxic gases/vapors + Respiratory
Respirators - with canisters NIOSH 42 CFR 84 or Yes
chemical splash system
or cartridges filter DIN 3179
Safety glass & goggles
ANSI Z87.1- 2003 or
13 Grass cutting Flying objects Safety shoes & glass shine Yes
DIN EN 166-167
protector
Applicability (Y)
(completed by
Body
No Activities Potential Hazards PPE Standards Reference Remarks Contract Owner
Part(s)
consult with
HSE)
To be used for rescue, emergency work,
or in any atmosphere that could be
IDLH, such as :
Airborne - O2 content < 19.5 % or potential to
contaminants drop < 19.5%
(also refer to OFA- Respiratory Pressure-demand SCBA - CS entry, prior to the atmosphere
ANSI Z88.2 NO
Confined space entry, chemicals NO-PR-00209, system or Supplied Air-line SABA being gas tested and certified safe to
19 handling Belanak Respiratory enter w/o SCBA/SABA
Protection Program) - potential significant release of toxic
materials
- ambient concentration of H2S > 10
ppm or potential to exceed 10 ppm
Trapped inside Whole Full-body harness + ANSI A10.14-1991 or
To be used for rescue purpose
confined space body lifelines ANSI Z359.1-1992
NOTE:
*) Exceptions to minimum PPE in certain workplace requires a workplace hazard assessment related to the PPE requirements