Professional Documents
Culture Documents
Datasheet Sanicro 69
Datasheet Sanicro 69
updated 20140204 17:39:37 (supersedes all previous editions)
Sanicro 69
(Covered electrodes)
Sanicro 69 is a covered electrode with basic coating for corrosionresistant overlays on
most lowalloy and stainless steels. It is also used for welding of alloys of Alloy 690
type (e.g. Sanicro 69) and dissimilar joints.
The electrode has good welding properties and is well suited to joint welding, as well as
overlay welding.
STANDARDS
• AWS ENiCrFe-7
• EN number Ni 6152
Product standards
• EN ISO 14172
• AWS A5.11
The following data is valid for non heat treated allweld metal.
C Si Mn P S Cr Ni Mo Nb Fe Co Cu
0.03 0.4 2.0 ≤0.020 ≤0.015 30 ≥50 ≤0.3 1.5 9 ≤0.05 ≤0.2
Fully austenitic
a
Proof strength, RP 0 . 2 MPa 420 330
Elongation, A % 43 39
Impact strength, Charpy V J 115
a
Rp0.2 corresponds to 0.2% offset yield strength
b
After postweld heat treatment at 610°C for 16 hours.
Resistant to intergranular stress corrosion cracking.
o o
Redrying electrodes when necessary: 250 C (480 F)/2h
DISCLAIMER:
Recommendations are for guidance only, and the suitability of a material for a specific application can be confirmed only when
we know the actual service conditions. Continuous development may necessitate changes in technical data without notice. This
datasheet is only valid for Sandvik materials.
www.smt.sandvik.com/contact-us
www.smt.sandvik.com