Professional Documents
Culture Documents
Linux Brprinter Installer 2.2.3 1
Linux Brprinter Installer 2.2.3 1
3-1 Página 1 de 58
#! /bin/bash
#
# Copyright(c) 2011- Brother Industries, Ltd.
# All Rights Reserved.
#
#Brother retains any and all copyrights to the Software.
#In no case this Agreement shall be construed to assign
#or otherwise transfer from Brother to User any copyrights
#or other intellectual property rights to whole or any part
#of the Software.
#
#Brother grants User a non-exclusive license: to reproduce
#and/or distribute (via Internet or in any other manner) the
#Software. Further, Brother grants User a non-exclusive
#license to modify, alter, translate or otherwise prepare
#derivative works of the Software and to reproduce and
#distribute (via Internet or in any other manner) such
#modification, alteration, translation or other derivative
#works for any purpose.
#
#The license of the Software from Brother hereunder is
#granted "AS IS." BROTHER HEREBY DISCLAIMS ANY WARRANTIES WITH
# RESPECT TO THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING
#BUT NOT LIMITED TO WARRANTY FOR THE QUALITY, MERCHANTABILITY,
#FITNESS FOR PARTICULAR PURPOSE OR NON-INFRINGEMENT.
#Brother shall have no liability in contract, tort (including
#negligence or breach of statutory duty) or otherwise for any
#interruption of use, loss of data, or for any indirect,
#incidental, punitive or consequential loss or damage, or for
#any loss of profit, revenue, data, goodwill or anticipated
#savings that arises under, out of, or in contemplation of
#this Agreement or otherwise arises due to any error, inaccuracy
#or defect in the Software even if Brother has been advised of
#the possibility of such loss or damage.
#Further, Brother shall have no liability to disclose and/or
#distribute the source cord of the Software to User under any
#circumstances. In no case shall the above license by Brother
#to modify, alter, translate or otherwise prepare derivative
#works of the Software be construed as Brother's implied
#agreement or undertakings to disclose and/or distribute the
#source cord of the Software.
DEBUG_MSG=0
MSG=1
COLOR='\033[1;31m'
COLOR2='\033[1;35m'
COLOR3='\033[1;32m'
COLOR4='\033[1;34m'
MONO='\033[1;0m'
if [ -e "$0".rc ];then
source "$0".rc
fi
brother_license(){
echo -e $COLOR2
if [ $REGION != JPN ];then
cat <<BROTHERLICENSE
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 3 de 58
=========================================
Brother License Agreement
Brother retains any and all copyrights to the Software. In no case this Agreement
shall be construed to assign or otherwise transfer from Brother to User any
copyrights or other intellectual property rights to whole or any part of the
Software.
The license of the Software from Brother hereunder is granted "AS IS." BROTHER
HEREBY DISCLAIMS ANY WARRANTIES WITH RESPECT TO THE SOFTWARE, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO WARRANTY FOR THE QUALITY, MERCHANTABILITY, FITNESS
FOR PARTICULAR PURPOSE OR NON-INFRINGEMENT.
Brother shall have no liability in contract, tort (including negligence or breach
of statutory duty) or otherwise for any interruption of use, loss of data, or for
any indirect, incidental, punitive or consequential loss or damage, or for any
loss of profit, revenue, data, goodwill or anticipated savings that arises under,
out of, or in contemplation of this Agreement or otherwise arises due to any
error, inaccuracy or defect in the Software even if Brother has been advised of
the possibility of such loss or damage.
Further, Brother shall have no liability to disclose and/or distribute the source
cord of the Software to User under any circumstances. In no case shall the above
license by Brother to modify, alter, translate or otherwise prepare derivative
works of the Software be construed as Brother's implied agreement or undertakings
to disclose and/or distribute the source cord of the Software.
=========================================
BROTHERLICENSE
else
cat <<BROTHERLICENSEJ
=========================================
ブラザーソフトウェア用 公衆使用許諾契約書
(1)本ソフトウェアに関する著作権は、ブラザーに帰属します。 本契約は、本ソフトウェアについてブラ
ザーから利用者に対し著作権の全部若しくは一部を譲渡するものとは解され得ません。
(2)ブラザーは利用者に対し、本ソフトウェアについて複製、譲渡 (著作権の譲渡ではなくソフトウェアが
格納された媒体の譲渡を指します) および公衆送信を行う権利を無償にて非独占的に許諾します。
(3)さらにブラザーは利用者に対し、いかなる目的のためにでも本ソフトウェアを変更、改変、翻訳あるいは
本ソフトウェアの派生物を作成し、かつそれらについて複製、譲渡及び公衆送信を行う権利を無償にて非独占的
に許諾します。
(4)ブラザーによる本ソフトウェアの配布・提供は、現状有姿にて行われるものであり、ブラザーは利用者に
対し、本ソフトウェアに関し、明示・黙示問わず、何らの保証 (品質保証・有用性に関する保証・特定目的へ
の合致に関する保証その他一切含め) も行いません。
(5)ブラザーは本ソフトウェアに関し、利用者に生じたいかなる損害 (直接損害・間接損害・特別損害・派
生損害・懲罰的損害その他一切含め) についても、かかる損害が予測可能か否か、また、その可能性について
ブラザーが知っていたか否かを問わず、賠償義務を負いません。
(6)さらにブラザーは利用者に対し、いかなる場合も本ソフトウェアのソースコードを開示する義務を負いま
せん。 上記ブラザーによる変更、改変、翻訳あるいは本ソフトウェアの派生物作成に関するライセンスは、い
かなる場合にも、本ソフトウェアのソースコード開示に関するブラザーの黙示的な同意とは解釈されません。
=========================================
BROTHERLICENSEJ
echo -e $MONO
fi
}
gpl_license(){
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 4 de 58
echo -e $COLOR2
cat <<GPLLICENSE
=========================================
GPL License Agreement
This Software may be used in accordance with GNU General Public License (GPL).
Please read carefully the following GPL and click on "I Accept" button. If you
cannot agree with the following terms, please click "I don't Accept" button. In
case of your non-acceptance, you can not use this Software.
Note:
Please click on "I Accept" while holding down "Shift" or right click on "I Accept"
and select "Save Target As,,," from the menu.
Copyright (C) 1989, 1991 Free Software Foundation, Inc.51 Franklin St, Fifth
Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license
document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and
change it. By contrast, the GNU General Public License is intended to guarantee
your freedom to share and change free software--to make sure the software is free
for all its users. This General Public License applies to most of the Free
Software Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to your
programs, too.
When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the freedom to
distribute copies of free software (and charge for this service if you wish), that
you receive source code or can get it if you want it, that you can change the
software or use pieces of it in new free programs; and that you know you can do
these things.
To protect your rights, we need to make restrictions that forbid anyone to deny
you these rights or to ask you to surrender the rights. These restrictions
translate to certain responsibilities for you if you distribute copies of the
software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a
fee, you must give the recipients all the rights that you have. You must make sure
that they, too, receive or can get the
source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer
you this license which gives you legal permission to copy, distribute and/or
modify the software.
Also, for each author's protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is
modified by someone else and passed on, we want its recipients to know that what
they have is not the original, so that any problems introduced by others will not
reflect on the original authors' reputations.
The precise terms and conditions for copying, distribution and modification follow.
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 5 de 58
0. This License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the terms of
this General Public License. The "Program", below, refers to any such program or
work, and a "work based on the Program" means either the Program or any derivative
work under copyright law: that is to say, a work containing the Program or a
portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the
term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by
this License; they are outside its scope. The act of running the Program is not
restricted, and the output from the Program
is covered only if its contents constitute a work based on the Program
(independent of having been made by running the Program). Whether that is true
depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as
you receive it, in any medium, provided that you conspicuously and appropriately
publish on each copy an appropriate copyright notice and disclaimer of warranty;
keep intact all the notices that refer to this License and to the absence of any
warranty; and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and you
may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus
forming a work based on the Program, and copy and distribute such modifications or
work under the terms of Section 1 above, provided that you also meet all of these
conditions:
a) You must cause the modified files to carry prominent notices stating that
you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or
in part contains or is derived from the Program or any part thereof, to be
licensed as a whole at no charge to all third parties under the terms of this
License.
Thus, it is not the intent of this section to claim rights or contest your
rights to work written entirely by you; rather, the intent is to exercise the
right to control the distribution of derivative or collective works based on the
Program.
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 6 de 58
In addition, mere aggregation of another work not based on the Program with
the Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under
Section 2) in object code or executable form under the terms of Sections 1 and 2
above provided that you also do one of the following:
The source code for a work means the preferred form of the work for making
modifications to it. For an executable work, complete source code means all the
source code for all modules it contains, plus any associated interface definition
files, plus the scripts used to control compilation and installation of the
executable. However, as a special exception, the source code distributed need not
include anything that is normally distributed (in either source or binary form)
with the major components (compiler, kernel, and so on) of the operating system on
which the executable runs, unless that component itself accompanies the executable.
It is not the purpose of this section to induce you to infringe any patents
or other property right claims or to contest validity of any such claims; this
section has the sole purpose of protecting the integrity of the free software
distribution system, which is implemented by public license practices. Many people
have made generous contributions to the wide range of software distributed through
that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any
other system and a licensee cannot impose that choice.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED
IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH
YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL
ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY
TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
If you develop a new program, and you want it to be of the greatest possible use
to the public, the best way to achieve this is to make it free software which
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 8 de 58
To do so, attach the following notices to the program. It is safest to attach them
to the start of each source file to most effectively convey the exclusion of
warranty; and each file should have at least the "copyright" line and a pointer to
where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the
terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this
program; if not, write to the Free Software Foundation, Inc., 51 Franklin St,
Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it
starts in an interactive mode:
The hypothetical commands \`show w' and \`show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may be called
something other than \`show w' and \`show c'; they could even be mouse-clicks or
menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if
any, to sign a "copyright disclaimer" for the program, if necessary. Here is a
sample; alter the names:
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may consider it
more useful to permit linking proprietary applications with the library. If this
is what you want to do, use the GNU Library General Public License instead of this
License.
=========================================
GPLLICENSE
echo -e $MONO
}
gpl_and_br_license(){
echo -e $COLOR2
if [ $REGION = JPN ];then
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 9 de 58
cat <<GPLBROTHERLICENSE_J
本契約は、本契約とともに配布・提供されるソフトウェア(以下単に本ソフトウェアといいます)に関し、ブラ
ザー工業株式会社(以下、ブラザーといいます)から本ソフトウェア受領者(以下、お客様といいます)に対し
与えられる使用許諾について定めるものです。
1.本ソフトウェアは、以下のモジュールから構成されています。
(1) GNU GENERAL PUBLIC LICENSE対象ソフトウェアモジュール(以下、GPL対象モジュールといいます)
(2) 上記に該当しないソフトウェアモジュール(以下、非GPLモジュールといいます。
本ソフトウェアを構成する各モジュールが上記のいずれに該当するかについては、本ソフトウェアのソースファ
イルをダウンロード頂きご確認ください。
3.非GPLモジュールについては、下記の条件が適用されます。非GPLモジュールについては、お客様は、下記の
条件に従い利用するものとします。また、お客様は非GPLモジュールを利用することにより、下記条件に同意し
たものと見なされます。
(1) 非GPLモジュールに関する著作権は、ブラザーに帰属します。本契約は、非GPLモジュールについてブラ
ザーからお客様に対し著作権の全部若しくは一部を譲渡するものとは解され得ません。
(2) ブラザーはお客様に対し、非GPLモジュールについて複製、譲渡(著作権の譲渡ではなくソフトウェアが格
納された媒体の譲渡を指します)、公衆送信、および、改変並びに翻案(改変若しくは翻案された非GPLモ
ジュールの複製、譲渡及び公衆送信を含みます)を行う権利を、無償にて非独占的に許諾します。
(3) お客様は、前号に基づく譲渡及び公衆送信に際し、本契約に定めると同一内容の再使用許諾を受領者に明示
的に与えなければなりません。
(4) ブラザーによる非GPLモジュールの配布・提供は、現状有姿にて行われるものであり、ブラザーはお客様に
対し、非GPLモジュールに関し、明示・黙示問わず、何らの保証(品質保証・有用性に関する保証・特定目的へ
の合致に関する保証その他一切含め)も行いません。
(5) ブラザーは非GPLモジュールに関し、適用法で認められる限り、お客様に生じたいかなる損害(直接損害・
間接損害・特別損害・派生損害・懲罰的損害その他一切含め)についても、かかる損害が予測可能か否か、ま
た、その可能性についてブラザーが知っていたか否かを問わず、賠償義務を負いません。
(6) さらにブラザーはお客様に対し、いかなる場合も非GPLモジュールのソースコードを開示する義務を負いま
せん。上記ブラザーによる改変、翻案に関するライセンスは、いかなる場合にも、非GPLモジュールのソース
コード開示に関するブラザーの黙示的な同意とは解釈されません。
GPLBROTHERLICENSE_J
else
cat <<GPLBROTHERLICENSE_U
This Agreement provides terms and conditions for license grant for use of the
software that is distributed with this Agreement ("Software") from Brother
Industries, Ltd. ("Brother") to recipients thereof ("You").
Note:
Please click on "I Accept" while holding down "Shift" or right click on "I Accept"
and select "Save Target As,,," from the menu.
(1) Certain software modules that is the subject of GNU GENERAL PUBLIC LICENSE
("GPL Modules"), and
(2) Other software modules ("Non-GPL Modules")
You may distinguish each of GPL Modules by downloading source files of the
Software as Brother separately makes available and reading such files.
2.Your use of all GPL Modules shall be subject to the terms and conditions of GNU
GENERAL PUBLIC LICENSE Version 2, June 1991 ("GPLv2"). Please see https://
support.brother.com/g/s/agreement/English_gpl/agree.html. You shall use GPL
Modules in accordance with the terms and conditions of GPLv2. Your use of GPL
Modules shall be deemed as your agreement to the terms and conditions of GPLv2.
3.You have the right to use all Non-GPL Modules only in accordance with the
following terms and conditions. Your use of Non-GPL Modules shall be deemed as
your agreement to the following terms and conditions:
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 10 de 58
(1) Brother retains any and all copyrights to Non-GPL Modules. In no case this
Agreement shall be construed to assign or otherwise transfer from Brother to you
any copyrights or other intellectual property rights to whole or any part of Non-
GPL Modules.
(2) Brother grants you a non-exclusive license to reproduce and/or distribute (via
Internet or in any other manner) Non-GPL Modules. Brother further grants you a non-
exclusive license to modify, alter, translate or otherwise prepare derivative
works of Non-GPL Modules and to reproduce and/or distribute (via Internet or in
any other manner) such modification, alteration, translation or other derivative
works of Non-GPL Modules.
(3) When you distribute (via Internet or in any other manner) Non-GPL Modules or
any modification, alteration, translation or other derivative works thereof under
the license granted in accordance with subparagraph 3(2) above, you must expressly
grant any and all recipient thereof the license equivalent to this Agreement which
applies to Non-GPL Modules.
(4) The license of Non-GPL Modules from Brother hereunder is granted "AS IS.
BROTHER HEREBY DISCLAIMS ANY WARRANTIES WITH RESPECT TO NON-GPL MODULES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY FOR THE QUALITY,
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR NON-INFRINGEMENT.
(5) To the extent allowed by applicable laws, Brother shall have no liability in
contract, tort (including negligence or breach of statutory duty) or otherwise for
any interruption of use, loss of data, or for any indirect, incidental, punitive
or consequential loss or damage, or for any loss of profit, revenue, data,
goodwill or anticipated savings that arises under, out of, or in contemplation of
this Agreement or otherwise arises due to any error, inaccuracy or defect in Non-
GPL Modules even if Brother has been advised of the possibility of such loss or
damage.
(6) The form in which Non-GPL Modules is distributed is subject to Brothers sole
discretion. Brother does not have any obligation to distribute or disclose Non-GPL
Modules in source code form. In no case shall this Agreement be deemed as Brothers
express or implied agreement to disclose source code of Non-GPL Modules.
GPLBROTHERLICENSE_U
fi
}
pdrv_complex_license(){
echo -e $COLOR2
if [ $REGION = JPN ];then
cat <<PDVRLICENSE_J
本契約は、本契約とともに配布・提供されるソフトウェア (以下単に本ソフトウェアといいます) に関し、本
ソフトウェアの著作権者であるブラザー工業株式会社 (以下、ブラザーといいます) から本ソフトウェア受領
者 (以下単に利用者といいます) に対し与えられる使用許諾について定めるものです。 利用者は、下記条項
に従い本ソフトウェアを利用するものとします。 また、利用者は本ソフトウェアを利用することにより、下記
条項に同意したものと見なされます。
1. 本ソフトウェアに関する著作権は、ブラザーに帰属します。 本契約は、本ソフトウェアについてブラ
ザーから利用者に対し著作権の全部若しくは一部を譲渡するものとは解され得ません。
2. ブラザーは利用者に対し、本ソフトウェアについて複製、譲渡 (著作権の譲渡ではなくソフトウェ
アが格納された媒体の譲渡を指します) および公衆送信を行う権利を無償にて非独占的に許諾します。
3. さらにブラザーは利用者に対し、いかなる目的のためにでも本ソフトウェアを変更、改変、翻訳ある
いは本ソフトウェアの派生物を作成し、かつそれらについて複製、譲渡及び公衆送信を行う権利を無償にて非独
占的に許諾します。
4. ブラザーによる本ソフトウェアの配布・提供は、現状有姿にて行われるものであり、ブラザーは利用
者に対し、本ソフトウェアに関し、明示・黙示問わず、何らの保証 (品質保証・有用性に関する保証・特定目
的への合致に関する保証その他一切含め) も行いません。
5. ブラザーは本ソフトウェアに関し、利用者に生じたいかなる損害 (直接損害・間接損害・特別損
害・派生損害・懲罰的損害その他一切含め) についても、かかる損害が予測可能か否か、また、その可能性に
ついてブラザーが知っていたか否かを問わず、賠償義務を負いません。
6. さらにブラザーは利用者に対し、いかなる場合も本ソフトウェアのソースコードを開示する義務を負
いません。 上記ブラザーによる変更、改変、翻訳あるいは本ソフトウェアの派生物作成に関するライセンス
は、いかなる場合にも、本ソフトウェアのソースコード開示に関するブラザーの黙示的な同意とは解釈されませ
ん。
7. 本ソフトウェアには、GNU GENERAL PUBLIC LICENSE Version 2の条件の適用を受けるプログ
ラムが含まれております。第1条から第6項の規定に関わらず、これらのプログラムにはGNU GENERAL
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 11 de 58
0. This License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the terms of
this General Public License. The "Program", below, refers to any such program or
work, and a "work based on the Program" means either the Program or any derivative
work under copyright law: that is to say, a work containing the Program or a
portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the
term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by
this License; they are outside its scope. The act of running the Program is not
restricted, and the output from the Program is covered only if its contents
constitute a work based on the Program (independent of having been made by running
the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and appropriately
publish on each copy an appropriate copyright notice and disclaimer of warranty;
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 12 de 58
keep intact all the notices that refer to this License and to the absence of any
warranty; and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at
your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus
forming a work based on the Program, and copy and distribute such modifications or
work under the terms of Section 1 above, provided that you also meet all of these
conditions:
a) You must cause the modified files to carry prominent notices stating that you
changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in
part contains or is derived from the Program or any part thereof, to be licensed
as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you
must cause it, when started running for such interactive use in the most ordinary
way, to print or display an announcement including an appropriate copyright notice
and a notice that there is no warranty (or else, saying that you provide a
warranty) and that users may redistribute the program under these conditions, and
telling the user how to view a copy of this License. (Exception: if the Program
itself is interactive but does not normally print such an announcement, your work
based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections
of that work are not derived from the Program, and can be reasonably considered
independent and separate works in themselves, then this License, and its terms, do
not apply to those sections when you distribute them as separate works. But when
you distribute the same sections as part of a whole which is a work based on the
Program, the distribution of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and thus to each and
every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights
to work written entirely by you; rather, the intent is to exercise the right to
control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the
Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section
2) in object code or executable form under the terms of Sections 1 and 2 above
provided that you also do one of the following:
b) Accompany it with a written offer, valid for at least three years, to give any
third party, for a charge no more than your cost of physically performing source
distribution, a complete machine-readable copy of the corresponding source code,
to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy
from a designated place, then offering equivalent access to copy the source code
from the same place counts as distribution of the source code, even though third
parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as
expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or
rights, from you under this License will not have their licenses terminated so
long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it.
However, nothing else grants you permission to modify or distribute the Program or
its derivative works. These actions are prohibited by law if you do not accept
this License. Therefore, by modifying or distributing the Program (or any work
based on the Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying the Program or
works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the
recipient automatically receives a license from the original licensor to copy,
distribute or modify the Program subject to these terms and conditions. You may
not impose any further restrictions on the recipients' exercise of the rights
granted herein. You are not responsible for enforcing compliance by third parties
to this License.
9. The Free Software Foundation may publish revised and/or new versions of the
General Public License from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Program specifies a
version number of this License which applies to it and "any later version", you
have the option of following the terms and conditions either of that version or of
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 14 de 58
any later version published by the Free Software Foundation. If the Program does
not specify a version number of this License, you may choose any version ever
published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose
distribution conditions are different, write to the author to ask for permission.
For software which is copyrighted by the Free Software Foundation, write to the
Free Software Foundation; we sometimes make exceptions for this. Our decision will
be guided by the two goals of preserving the free status of all derivatives of our
free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED
IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH
YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY
TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use
to the public, the best way to achieve this is to make it free software which
everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them
to the start of each source file to most effectively convey the exclusion of
warranty; and each file should have at least the "copyright" line and a pointer to
where the full notice is found.
one line to give the program's name and an idea of what it does.
Copyright (C) yyyy name of author
This program is free software; you can redistribute it and/or modify it under the
terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this
program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street,
Fifth Floor, Boston, MA 02110-1301, USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it
starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
type \`show w'. This is free software, and you are welcome
to redistribute it under certain conditions; type \`show c'
for details.
The hypothetical commands \`show w' and \`show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may be called
something other than \`show w' and \`show c'; they could even be mouse-clicks or
menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if
any, to sign a "copyright disclaimer" for the program, if necessary. Here is a
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 15 de 58
PDVRLICENSE_J
else
cat <<PDVRLICENSE_U
License Agreement
This Agreement provides terms and conditions for license grant from Brother
Industries, Ltd ("Brother"). Brother, who owns all copyrights to the software that
is distributed with this Agreement ("Software") to recipients thereof ("User"),
for use of the Software. User shall have the right to use the Software only in
accordance with the terms and conditions of this Agreement. Any use by User of the
Software shall be deemed as its agreement hereto.
Note:
Please click on "I Accept" while holding down "Shift" or right click on "I Accept"
and select "Save Target As,,," from the menu.
Brother retains any and all copyrights to the Software. In no case this Agreement
shall be construed to assign or otherwise transfer from Brother to User any
copyrights or other intellectual property rights to whole or any part of the
Software.
Brother grants User a non-exclusive license: to reproduce and/or distribute (via
Internet or in any other manner) the Software. Further, Brother grants User a non-
exclusive license to modify, alter, translate or otherwise prepare derivative
works of the Software and to reproduce and distribute (via Internet or in any
other manner) such modification, alteration, translation or other derivative works
for any purpose.
The license of the Software from Brother hereunder is granted "AS IS." BROTHER
HEREBY DISCLAIMS ANY WARRANTIES WITH RESPECT TO THE SOFTWARE, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO WARRANTY FOR THE QUALITY, MERCHANTABILITY, FITNESS
FOR PARTICULAR PURPOSE OR NON-INFRINGEMENT. Brother shall have no liability in
contract, tort (including negligence or breach of statutory duty) or otherwise for
any interruption of use, loss of data, or for any indirect, incidental, punitive
or consequential loss or damage, or for any loss of profit, revenue, data,
goodwill or anticipated savings that arises under, out of, or in contemplation of
this Agreement or otherwise arises due to any error, inaccuracy or defect in the
Software even if Brother has been advised of the possibility of such loss or
damage. Further, Brother shall have no liability to disclose and/or distribute the
source code of the Software to User under any circumstances. In no case shall the
above license by Brother to modify, alter, translate or otherwise prepare
derivative works of the Software be construed as Brother's implied agreement or
undertakings to disclose and/or distribute the source code of the Software.
The Software contains the programs licensed under the terms and conditions of GNU
GENERAL PUBLIC LICENSE Version 2. Notwithstanding the foregoing, the terms and
conditions of GNU GENERAL PUBLIC LICENSE Version 2 is applied to such programs.
Such programs are stored on the following directory and its sub-directories.
<cupswrapper>
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
The licenses for most software are designed to take away your freedom to share and
change it. By contrast, the GNU General Public License is intended to guarantee
your freedom to share and change free software--to make sure the software is free
for all its users. This General Public License applies to most of the Free
Software Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU
Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the freedom to
distribute copies of free software (and charge for this service if you wish), that
you receive source code or can get it if you want it, that you can change the
software or use pieces of it in new free programs; and that you know you can do
these things.
To protect your rights, we need to make restrictions that forbid anyone to deny
you these rights or to ask you to surrender the rights. These restrictions
translate to certain responsibilities for you if you distribute copies of the
software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a
fee, you must give the recipients all the rights that you have. You must make sure
that they, too, receive or can get the source code. And you must show them these
terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer
you this license which gives you legal permission to copy, distribute and/or
modify the software.
Also, for each author's protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is
modified by someone else and passed on, we want its recipients to know that what
they have is not the original, so that any problems introduced by others will not
reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to
avoid the danger that redistributors of a free program will individually obtain
patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone's free use or not
licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the terms of
this General Public License. The "Program", below, refers to any such program or
work, and a "work based on the Program" means either the Program or any derivative
work under copyright law: that is to say, a work containing the Program or a
portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the
term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by
this License; they are outside its scope. The act of running the Program is not
restricted, and the output from the Program is covered only if its contents
constitute a work based on the Program (independent of having been made by running
the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and appropriately
publish on each copy an appropriate copyright notice and disclaimer of warranty;
keep intact all the notices that refer to this License and to the absence of any
warranty; and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at
your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus
forming a work based on the Program, and copy and distribute such modifications or
work under the terms of Section 1 above, provided that you also meet all of these
conditions:
a) You must cause the modified files to carry prominent notices stating that you
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 17 de 58
b) You must cause any work that you distribute or publish, that in whole or in
part contains or is derived from the Program or any part thereof, to be licensed
as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you
must cause it, when started running for such interactive use in the most ordinary
way, to print or display an announcement including an appropriate copyright notice
and a notice that there is no warranty (or else, saying that you provide a
warranty) and that users may redistribute the program under these conditions, and
telling the user how to view a copy of this License. (Exception: if the Program
itself is interactive but does not normally print such an announcement, your work
based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections
of that work are not derived from the Program, and can be reasonably considered
independent and separate works in themselves, then this License, and its terms, do
not apply to those sections when you distribute them as separate works. But when
you distribute the same sections as part of a whole which is a work based on the
Program, the distribution of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and thus to each and
every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights
to work written entirely by you; rather, the intent is to exercise the right to
control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the
Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section
2) in object code or executable form under the terms of Sections 1 and 2 above
provided that you also do one of the following:
b) Accompany it with a written offer, valid for at least three years, to give any
third party, for a charge no more than your cost of physically performing source
distribution, a complete machine-readable copy of the corresponding source code,
to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
4. You may not copy, modify, sublicense, or distribute the Program except as
expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or
rights, from you under this License will not have their licenses terminated so
long as such parties remain in full compliance.
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 18 de 58
5. You are not required to accept this License, since you have not signed it.
However, nothing else grants you permission to modify or distribute the Program or
its derivative works. These actions are prohibited by law if you do not accept
this License. Therefore, by modifying or distributing the Program (or any work
based on the Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying the Program or
works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the
recipient automatically receives a license from the original licensor to copy,
distribute or modify the Program subject to these terms and conditions. You may
not impose any further restrictions on the recipients' exercise of the rights
granted herein. You are not responsible for enforcing compliance by third parties
to this License.
9. The Free Software Foundation may publish revised and/or new versions of the
General Public License from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Program specifies a
version number of this License which applies to it and "any later version", you
have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Program does
not specify a version number of this License, you may choose any version ever
published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose
distribution conditions are different, write to the author to ask for permission.
For software which is copyrighted by the Free Software Foundation, write to the
Free Software Foundation; we sometimes make exceptions for this. Our decision will
be guided by the two goals of preserving the free status of all derivatives of our
free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 19 de 58
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED
IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH
YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY
TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use
to the public, the best way to achieve this is to make it free software which
everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them
to the start of each source file to most effectively convey the exclusion of
warranty; and each file should have at least the "copyright" line and a pointer to
where the full notice is found.
one line to give the program's name and an idea of what it does.
Copyright (C) yyyy name of author
This program is free software; you can redistribute it and/or modify it under the
terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this
program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street,
Fifth Floor, Boston, MA 02110-1301, USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it
starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
type \`show w'. This is free software, and you are welcome
to redistribute it under certain conditions; type \`show c'
for details.
The hypothetical commands \`show w' and \`show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may be called
something other than \`show w' and \`show c'; they could even be mouse-clicks or
menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if
any, to sign a "copyright disclaimer" for the program, if necessary. Here is a
sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
\`Gnomovision' (which makes passes at compilers) written by James Hacker.
PDVRLICENSE_U
fi
TIMEOUT=30
DBG_MSG(){
if [ "$DEBUG_MSG" = 1 ];then
echo -e ${COLOR3}"DEBUGMSG : $1"${MONO}
fi
}
MESSAGE(){
if [ "$MSG" = 1 ];then
echo -e ${COLOR3}"$1"${MONO}
fi
}
install_done=no
preproc_done=''
postproc_done=''
PREPROC=''
POSTPROC=''
pre_install_sweep(){
DBG_MSG pre_install_sweep
ORGC="/etc/init.d/cups"
ORGL="/etc/init.d/lpd"
ORGLN="/etc/init.d/lprng"
SYMLNC="cups -> /etc/init.d/cupsys"
SYMLNL="lpd -> /etc/init.d/cupsys"
SYMLNLN="lprng -> /etc/init.d/cupsys"
if [ "$(ls -al $ORGC 2> /dev/null | grep ^l | grep "$SYMLNC" )" != '' ]
then
rm -f $ORGC 2> /dev/null
fi
if [ "$(ls -al $ORGL 2> /dev/null | grep ^l | grep "$SYMLNL" )" != '' ]
then
rm -f $ORGL 2> /dev/null
fi
if [ "$(ls -al $ORGLN 2> /dev/null | grep ^l | grep "$SYMLNLN")" != '' ]
then
rm -f $ORGLN 2> /dev/null
fi
}
post_install_sweep(){
DBG_MSG post_install_sweep
if [ ! -d ${wkdir}/${modelnhuc} ];then
if [ -f ${wkdir}/${modelnhuc} ];then
rm -f ${wkdir}/${modelnhuc} 2> /dev/null
fi
fi
}
#
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 21 de 58
if [ $NODOWNLOAD = 1 ];then
cp $INFPATH ${wkdir}
modelnhuc=$MODEL
elif [ $NODOWNLOAD = 2 ];then
modelnhuc=$MODEL
else
inputmodel=$1
modelnhuc=$(echo $inputmodel | tr "[a-z]" "[A-Z]" | tr -d '-')
fulpath=$URL_INF/${modelnhuc}
dlresult=IDENTIC
if [ $infcheck = 0 ] && [ $HIDE_INF = NO ];then
MESSAGE "wget $WGET_OP $CACHEFLG -P ${wkdir} $fulpath"
fi
fi
wget $WGET_OP $CACHEFLG -P ${wkdir} $fulpath > /dev/null 2> /dev/null
#--------------------------------------
if [ ! -f ${wkdir}/${modelnhuc} ];then
# DCP315C -> DCP315CN
dlresult=APPROX1
modelnhuc2=$(echo $inputmodel | tr "[a-z]" "[A-Z]" | tr -d '-' |\
sed -e s/"[A-Z][A-Z][A-Z][A-Z]$"/""/g \
-e s/"[A-Z][A-Z][A-Z]$"/""/g \
-e s/"[A-Z][A-Z]$"/""/g \
-e s/"[A-Z]$"/""/g )
#--------------------------------------
if [ ! -f ${wkdir}/${modelnhuc} ];then
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 22 de 58
#--------------------------------------
if [ ! -f "${wkdir}/${modelnhuc}" ];then
# DCP315C -> DCP310C
dlresult=APPROX3
modelnhuc=$(echo $inputmodel | \
sed -e s/"[0-9]$"/"0"/g \
-e s/"[0-9]C"/"0C"/g \
-e s/"[0-9]D"/"0D"/g \
-e s/"[0-9]W"/"0W"/g \
-e s/"[0-9]N"/"0N"/g )
if [ "${modelnhuc}" != '' ];then
fulpath=$URL_INF/${modelnhuc}
#echo wget $WGET_OP $CACHEFLG -P ${wkdir} $fulpath
if [ $infcheck = 0 ] && [ $HIDE_INF = NO ];then
MESSAGE "wget $WGET_OP $CACHEFLG -P ${wkdir} $fulpath"
fi
wget $WGET_OP $CACHEFLG -P ${wkdir} $fulpath > /dev/null 2> /dev/null
fi
fi
#--------------------------------------
if [ ! -f ${wkdir}/${modelnhuc} ];then
# DCP315C -> DCP310CN
dlresult=APPROX4
modelnhuc2=$(echo $inputmodel | tr "[a-z]" "[A-Z]" | tr -d '-' |\
sed -e s/"[A-Z][A-Z][A-Z][A-Z]$"/""/g \
-e s/"[A-Z][A-Z][A-Z]$"/""/g \
-e s/"[A-Z][A-Z]$"/""/g \
-e s/"[A-Z]$"/""/g |\
sed s/"[0-9]$"/"0"/g )
#--------------------------------------
if [ ! -f ${wkdir}/${modelnhuc} ];then
# DCP315C -> DCP310
dlresult=APPROX5
modelnhuc=$(echo $inputmodel | tr "[a-z]" "[A-Z]" | tr -d '-' |\
sed -e s/"[A-Z][A-Z][A-Z][A-Z]$"/""/g \
-e s/"[A-Z][A-Z][A-Z]$"/""/g \
-e s/"[A-Z][A-Z]$"/""/g \
-e s/"[A-Z]$"/""/g |\
sed s/"[0-9]$"/"0"/g )
fi
fi
#--------------------------------------
if [ -f ${wkdir}/${modelnhuc} ];then
modelnhuc=${lnk}
fulpath=$URL_INF/${modelnhuc}
if [ $infcheck = 0 ] && [ $HIDE_INF = NO ];then
MESSAGE "wget $WGET_OP $CACHEFLG -P ${wkdir} $fulpath"
fi
wget $WGET_OP $CACHEFLG -P ${wkdir} $fulpath > /dev/null 2> /dev/null
fi
fi
}
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 24 de 58
get_packages_name(){
DBG_MSG get_packages_name
inf=${wkdir}/$1
if [ "$PRODUCT_NAME" = '' ];then
PRODUCT_NAME=$(grep "\[" $inf 2>/dev/null | sed -e s/"\["//g -e s/"\]"//g)
fi
SCANNER_DRV=$(grep "SCANNER_DRV" $inf 2>/dev/null | sed s/"SCANNER_DRV="//g )
SCANKEY_DRV=$(grep "SCANKEY_DRV" $inf 2>/dev/null | sed s/"SCANKEY_DRV="//g )
PRINTERNAME=$(grep "PRINTERNAME" $inf 2>/dev/null | sed s/"PRINTERNAME="//g )
if [ "$SCANNER_DRV" != '' ];then
SCANNER_LNK="$SCANNER_DRV".lnk
fulpath=$URL_INF/$SCANNER_LNK
else
CUPSFILE=$(grep "PRN_CUP_DEB" $inf 2>/dev/null | sed s/"PRN_CUP_DEB="//g )
LPRFILE=$(grep "PRN_LPD_DEB" $inf 2>/dev/null | sed s/"PRN_LPD_DEB="//g )
PDRVFILE=$(grep "PRN_DRV_DEB" $inf 2>/dev/null | sed s/"PRN_DRV_DEB="//g )
REQ32LIB=$(grep "REQUIRE32LIB" $inf 2>/dev/null| sed s/"REQUIRE32LIB="//g )
if [ "$SCANNER_LNK" != '' ];then
if [ "$arch" = 'i386' ];then
SCANFILE=$(grep "DEB32=" ${wkdir}/"$SCANNER_LNK" | sed s/"DEB32="//g )
else
SCANFILE=$(grep "DEB64=" ${wkdir}/"$SCANNER_LNK" | sed s/"DEB64="//g )
fi
fi
if [ "$SCANKEY_LNK" != '' ];then
if [ "$arch" = 'i386' ];then
SKEYFILE=$(grep "DEB32=" ${wkdir}/"$SCANKEY_LNK" | sed s/"DEB32="//g )
else
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 25 de 58
fi
fi
if [ -f "$inf" ];then
rm -f "$inf" 2> /dev/null
fi
if [ -f ${wkdir}/"$SCANNER_LNK" ] && [ "$SCANNER_LNK" != '' ];then
rm -f ${wkdir}/"$SCANNER_LNK" 2> /dev/null
fi
if [ -f ${wkdir}/"$SCANKEY_LNK" ] && [ "$SCANKEY_LNK" != '' ];then
rm -f ${wkdir}/"$SCANKEY_LNK" 2> /dev/null
fi
}
HOSTDEFAULT="download.brother.com"
HOSTINFJP=$HOSTDEFAULT
HOSTINFUS=$HOSTDEFAULT
HOSTPKGJP=$HOSTDEFAULT
HOSTPKGUS=$HOSTDEFAULT
DBG_MSG BROTHERSOLUTIONSCENTOR_HOSTINFJP=$BROTHERSOLUTIONSCENTOR_HOSTINFJP
DBG_MSG BROTHERSOLUTIONSCENTOR_HOSTINFUS=$BROTHERSOLUTIONSCENTOR_HOSTINFUS
DBG_MSG BROTHERSOLUTIONSCENTOR_HOSTPKGJP=$BROTHERSOLUTIONSCENTOR_HOSTPKGJP
DBG_MSG BROTHERSOLUTIONSCENTOR_HOSTPKGUS=$BROTHERSOLUTIONSCENTOR_HOSTPKGUS
BASEPATHJP="/pub/com/linux/linuxj/"
BASEPATHUS="/pub/com/linux/linux/"
set_host_info(){
DBG_MSG set_host_info
if [ "$1" = "JPN" ];then
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 26 de 58
URL_INF="https://"${HOSTINFJP}${BASEPATHJP}infs
URL_PKG="https://"${HOSTPKGJP}${BASEPATHJP}packages
else
URL_INF="https://"${HOSTINFUS}${BASEPATHUS}infs
URL_PKG="https://"${HOSTPKGUS}${BASEPATHUS}packages
fi
DBG_MSG " URL_INF="$URL_INF
DBG_MSG " URL_PKG="$URL_PKG
}
network_check(){
netchkpage=$1
if [ "${wkdir}" != '' ] && [ "$netchkpage" != '' ];then
if [ -f ${wkdir}/$netchkpage ];then
rm ${wkdir}/$netchkpage 2> /dev/null
fi
fi
fulpath2="https://"${HOSTINFUS}${BASEPATHUS}infs/$netchkpage
wget $WGET_OP2 $CACHEFLG -P ${wkdir} $fulpath2 > /dev/null 2> /dev/null
rcwget=$?
netaccess=FALSE
if [ -f ${wkdir}/$netchkpage ];then
netaccess=SUCCESS
rm ${wkdir}/$netchkpage 2> /dev/null
fi
}
drv_get_and_install(){
DBG_MSG drv_get_and_install
package=$1
license=$2
default=$3
iinstall_result=No
iinstall_result=Yes
fi
fi
fi #answer
elif [ "$default" = Yes ];then
echo -e -n $COLOR$MESSAGE165 #"OK\? [Y/n] ->"
answer=""
read answer
echo -e $MONO
if [ "$answer" != N ] && [ "$answer" != n ]; then
if ! [ -f "$package" ];then
$license
echo -e -n $COLOR$MESSAGE170 #"Are you agree\? [Y/n] ->"
answer=""
read answer
echo -e $MONO
if [ "$answer" != N ] && [ "$answer" != n ]; then
echo wget $WGET_OP $CACHEFLG $URL_PKG/$package
wget $WGET_OP $CACHEFLG $URL_PKG/$package
fi
if [ -f "$package" ];then
echo -n -e $COLOR4
echo $PKGCMD $package
echo -n -e $MONO
if [ "$DEBUG_NOINSTALL" != 'yes' ];then
pre_proc
$PKGCMD $package
else
sleep 1
fi
iinstall_result=Yes
fi
fi
fi #answer
else # deault = Force
if ! [ -f "$package" ];then
$license
echo -e -n $COLOR$MESSAGE170 #"Are you agree\? [Y/n] ->"
answer=""
read answer
echo -e $MONO
if [ "$answer" != N ] && [ "$answer" != n ]; then
echo wget $WGET_OP $CACHEFLG $URL_PKG/$package
wget $WGET_OP $CACHEFLG $URL_PKG/$package
fi
fi
if [ -f "$package" ];then
echo -n -e $COLOR4
echo $PKGCMD $package
echo -n -e $MONO
if [ "$DEBUG_NOINSTALL" != 'yes' ];then
pre_proc
$PKGCMD $package
iinstall_result=Yes
else
sleep 1
fi
fi
fi #default
fi #package
}
make_generic_uninstaller(){
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 28 de 58
DBG_MSG make_generic_uninstaller
if [ -f $1 ];then
generic_uninstaller=uninstaller_$2
cat <<GENERICUNINST > $generic_uninstaller
#! /bin/bash
$RMPKGCMD $2
$(rmscanlibmodules $3)
GENERICUNINST
chmod 744 $generic_uninstaller
fi
}
make_brscan_uninstaller(){
DBG_MSG make_brscan_uninstaller
if [ -f $1 ];then
brscan_uninstaller=uninstaller_$2
cat <<BRSCANUNINST > $brscan_uninstaller
#! /bin/bash
touch /usr/local/Brother/sane/dummy
$RMPKGCMD $2
rm -f /usr/local/Brother/sane/dummy
rmdir --ignore-fail-on-non-empty /usr/local/Brother/sane 2>/dev/null
$(rmscanlibmodules $3)
BRSCANUNINST
chmod 744 $brscan_uninstaller
fi
}
make_brscan2_uninstaller(){
DBG_MSG make_brscan2_uninstaller
if [ -f $1 ];then
brscan2_uninstaller=uninstaller_$2
cat <<BRSCAN2UNINST > $brscan2_uninstaller
#! /bin/bash
touch /usr/local/Brother/sane/dummy
$RMPKGCMD $2
rm -f /usr/local/Brother/sane/dummy
rmdir --ignore-fail-on-non-empty /usr/local/Brother/sane 2>/dev/null
$(rmscanlibmodules $3)
BRSCAN2UNINST
chmod 744 $brscan2_uninstaller
fi
}
scanlibmodules1="\
libbrcolm.so.1.0.1 \
libbrscandec.so.1.0.0 \
sane/libsane-brother.so.1.0.7 \
sane/libsane-brother.so \
sane/libsane-brother.so.1 \
libbrscandec.so.1 \
libbrcolm.so \
libbrcolm.so.1 \
libbrscandec.so"
scanlibmodules2="\
libbrscandec2.so.1.0.0 \
sane/libsane-brother2.so.1.0.7 \
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 29 de 58
sane/libsane-brother2.so.1 \
sane/libsane-brother2.so \
libbrcolm2.so.1.0.1 \
libbrcolm2.so \
libbrscandec2.so.1 \
libbrscandec2.so \
libbrcolm2.so.1"
scanlibmodules3="\
libbrscandec3.so.1.0.0 \
sane/libsane-brother3.so.1.0.7 \
sane/libsane-brother3.so.1 \
sane/libsane-brother3.so \
libbrscandec3.so \
libbrscandec3.so.1"
scanlibmodules4=""
dellist=''
cpscanlibmodules(){
for file in $1
do
lib64mod=/usr/lib64/$file
libmod=/usr/lib/$file
if [ -f $lib64mod ];then
if [ -d /usr/lib ];then
if [ ! -f $libmod ];then
cp $lib64mod $libmod 2> /dev/null
if [ -f $libmod ];then
dellist2=$(echo $dellist $libmod)
dellist=$dellist2
fi
fi
fi
fi
done
}
rmscanlibmodules(){
for file in $dellist
do
for check in $*
do
chkresult=$(echo $file | grep $check\$ )
if [ "$chkresult" != '' ];then
echo rm -f $file
fi
done
done
}
udevrulefile=""
udev_installed=no
udev_install(){
libsanerule=$(ls /lib/udev/rules.d/*.rules /etc/udev/rules.d/*.rules | \
grep libsane | head --line=1)
number=$(echo $libsanerule | \
sed s/"\/lib\/udev\/rules.d\/"//g |\
sed s/"\/etc\/udev\/rules.d\/"//g |\
head --bytes=2)
chk=$(echo $number | grep "[0-9][0-9]")
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 30 de 58
####
udevrulefile="/etc/udev/rules.d/${number}-brother-libsane-type1-inst.rules"
cat << %%_UDEV_RULE_%% > $udevrulefile
#
# udev rules sample for Brother MFP
# version 1.0.2-0
#
# Copyright (C) 2012-2017 Brother. Industries, Ltd.
#
# copy to /etc/udev/rules.d or /lib/udev/rules.d
#
ACTION!="add", GOTO="brother_mfp_end"
SUBSYSTEM=="usb", GOTO="brother_mfp_udev_1"
SUBSYSTEM!="usb_device", GOTO="brother_mfp_end"
LABEL="brother_mfp_udev_1"
SYSFS{idVendor}=="04f9", GOTO="brother_mfp_udev_2"
ATTRS{idVendor}=="04f9", GOTO="brother_mfp_udev_2"
GOTO="brother_mfp_end"
LABEL="brother_mfp_udev_2"
ATTRS{bInterfaceClass}!="0ff", GOTO="brother_mfp_end"
ATTRS{bInterfaceSubClass}!="0ff", GOTO="brother_mfp_end"
ATTRS{bInterfaceProtocol}!="0ff", GOTO="brother_mfp_end"
#MODE="0666"
#GROUP="scanner"
ENV{libsane_matched}="yes"
#SYMLINK+="scanner-%k"
LABEL="brother_mfp_end"
%%_UDEV_RULE_%%
####
chmod 644 $udevrulefile
udev_installed=yes
fi
fi
}
scanner_install(){
DBG_MSG scanner_install
case "$SCANNER_DRV" in
"brscan")
drv_get_and_install $SCANFILE gpl_and_br_license Force
if [ $iinstall_result = Yes ];then
cpscanlibmodules "$scanlibmodules1"
make_brscan_uninstaller $SCANFILE "$SCANNER_DRV" "$scanlibmodules1"
install_done=yes
fi
scanconfig=brsaneconfig
drv_get_and_install $SKEYFILE brother_license Force
if [ $iinstall_result = Yes ];then
dellist=''
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 31 de 58
* )
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 32 de 58
;;
esac
udev_install
# libusb-0.1-4
post_proc
pre_proc(){
if [ "$preproc_done" = '' ];then
if [ "$PREPROC" != '' ];then
echo "$PREPROC" | /bin/bash
fi
fi
preproc_done=done
}
post_proc(){
if [ "$install_done" = yes ];then
if [ "$postproc_done" = '' ];then
if [ "$POSTPROC" != '' ];then
echo "$POSTPROC" | /bin/bash
fi
fi
postproc_done=done
fi
}
cleanup_deb_cups_pkg(){
if [ "$PKG" = deb ];then
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 33 de 58
ipadrs=''
deviceuri="usb://"
PRODUCT_NAME=''
#
# START (MAIN)
#
HIDE_INF=YES
DBG_MSG MAIN
dlresult=IDENTIC
lnk_flag=' '
LIB64FLT=/usr/lib64/cups/filter
LIB32FLT=/usr/lib32/cups/filter
LIBFLT=/usr/lib/cups/filter
TESTPRINT=/usr/share/cups/data/testprint.ps
TESTPRINT2=/usr/share/cups/data/testprint
## sweep
pre_install_sweep
package_list=NO
CACHEFLG='--no-cache'
infcheck=0
if [ "$1" = '--inf-check=1' ];then
infcheck=1
package_list=TEXT
fi
if [ "$1" = '--inf-check=2' ];then
infcheck=2
package_list=CSV
fi
if [ "$1" = '--inf-check=3' ];then
infcheck=3
package_list=CSV
fi
if [ "$1" = '--inf-check=4' ];then
infcheck=4
package_list=CSV
fi
if [ "$1" = '--inf-check=5' ];then
infcheck=5
package_list=CSV
fi
exit 0
fi
post_install_sweep
if [ "$1" = '-f' ] || \
[ "$1" = '--find' ] || \
[ "$1" = '--inf-check=1' ] || \
[ "$1" = '--inf-check=2' ] || \
[ "$1" = '--inf-check=3' ] || \
[ "$1" = '--inf-check=4' ] || \
[ "$1" = '--inf-check=5' ] || \
[ "$1" = '--inf-check=6' ] || \
[ "$1" = '-p' ];then
MODEL_tmp=$(echo $2 | sed s/'-'//g)
elif [ "$1" = '' ];then
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 36 de 58
NODOWNLOAD=1
fi
LPRFILE=""
CUPSFILE=""
PDRVFILE=""
SCANFILE=""
SKEYFILE=""
wkdir=$(mktemp -d /tmp/brprinter-installer_XXXXXX)
packdir=brother_driver_packdir
basedir=$(pwd)
modelnhuc=""
mkdir -p "$wkdir"
REGION2=$REGION
MODEL=LOCAL
NODOWNLOAD=2
fi
# network check
netaccess=FALSE
network_check HL5470DW
if [ $netaccess != SUCCESS ];then
network_check MFCJ6710CDW
fi
echo -e -n $COLOR$MESSAGE070 #"Will you specify the PROXY server\? [y/N] ->"
read answer
if [ "$answer" = Y ] || [ "$answer" = y ]; then
echo -e $COLOR$MESSAGE080
echo -e $COLOR$MESSAGE090
echo -e $COLOR$MESSAGE100
echo -e -n $COLOR$MESSAGE110
read proxy
echo -e $MONO
export https_proxy=$proxy
network_check HL5470DW
if [ $netaccess != SUCCESS ];then
network_check MFCJ6710CDW
fi
if [ $netaccess != SUCCESS ];then
echo -e $COLOR$MESSAGE120$MONO
rmdir "${wkdir}"
exit 0
fi
else
echo -e $COLOR$MESSAGE120$MONO
rmdir "${wkdir}"
exit 0
fi
fi
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 38 de 58
set_host_info $REGION
get_inf_file $MODEL $wkdir
if [ $infcheck = 0 ];then
if [ ! -f ${wkdir}/${modelnhuc} ] || [ "${modelnhuc}" = '' ];then
netaccess=FALSE
network_check HL5470DW
if [ $netaccess != SUCCESS ];then
network_check MFCJ6710CDW
fi
echo -e $COLOR$MESSAGE080
echo -e $COLOR$MESSAGE090
echo -e $COLOR$MESSAGE100
echo -e -n $COLOR$MESSAGE110
read proxy
echo -e $MONO
export https_proxy=$proxy
else
echo -e $MONO
#DBG_MSG "exit 10"
rmdir "${wkdir}"
exit 0
fi
echo -e $MONO
REGION=$REGION2
set_host_info $REGION
get_inf_file $MODEL $wkdir
fi
fi
touch brother-drivers/"$0".log
dlresult="FALSE "
lnk_flag=" "
rccups=" "
rclpr=" "
rcscan=" "
rcskey=" "
if [ "$infcheck" = 3 ];then
echo "$2"":,"$PKG",${dlresult},${lnk_flag}","$SCANNER_DRV"\
,$rccups,$rclpr,$rcscan,$rcskey\
>> brother-drivers/"$0".log
rm -fR brother-drivers/$2 2> /dev/null
fi
echo "$2"":,"$PKG",${dlresult},${lnk_flag}","$SCANNER_DRV"\
,$rccups,$rclpr,$rcscan,$rcskey\
,$LPRFILE,$CUPSFILE,$PDRVFILE,$SCANFILE,$SKEYFILE \
>> brother-drivers/"$0".log
fi
rmdir "${wkdir}"
exit 0
fi
get_packages_name ${modelnhuc}
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 40 de 58
if [ -f ${wkdir}/${modelnhuc} ];then
rm -f ${wkdir}/${modelnhuc} 2> /dev/null
fi
if [ $infcheck = 1 ];then
echo "PACKAGE:PRNL="$LPRFILE
echo "PACKAGE:PRNC="$CUPSFILE
echo "PACKAGE:PDRV="$PDRVFILE
echo "PACKAGE:SCAN="$SCANFILE
echo "PACKAGE:SKEY="$SKEYFILE
rmdir "${wkdir}"
exit 0
fi
if [ $infcheck = 2 ];then
echo "$2"":,"$PKG",${dlresult},${lnk_flag}"\
,$LPRFILE,$CUPSFILE,$PDRVFILE,$SCANFILE,$SKEYFILE
rmdir "${wkdir}"
exit 0
fi
dwkdir=brother-drivers/$2
mkdir -p $dwkdir
if [ "$CUPSFILE" != '' ];then
rccups="FALSE "
wget $WGET_OP '-nc' $URL_PKG/$CUPSFILE -P $dwkdir
fi
if [ "$LPRFILE" != '' ];then
rclpr="FALSE "
wget $WGET_OP '-nc' $URL_PKG/$LPRFILE -P $dwkdir
fi
if [ "$PDRVFILE" != '' ];then
rcpdrv="FALSE "
wget $WGET_OP '-nc' $URL_PKG/$PDRVFILE -P $dwkdir
fi
if [ "$SCANFILE" != '' ];then
rcscan="FALSE "
wget $WGET_OP '-nc' $URL_PKG/$SCANFILE -P $dwkdir
fi
if [ "$SKEYFILE" != '' ];then
rcskey="FALSE "
wget $WGET_OP '-nc' $URL_PKG/$SKEYFILE -P $dwkdir
fi
# -------------
if [ "$CUPSFILE" != '' ];then
if [ -f $dwkdir/$CUPSFILE ];then
rccups=SUCCESS
fi
fi
if [ "$LPRFILE" != '' ];then
if [ -f $dwkdir/$LPRFILE ];then
rclpr=SUCCESS
fi
fi
if [ "$PDRVFILE" != '' ];then
if [ -f $dwkdir/$PDRVFILE ];then
rcpdrv=SUCCESS
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 41 de 58
fi
fi
if [ "$SCANFILE" != '' ];then
if [ -f $dwkdir/$SCANFILE ];then
rcscan=SUCCESS
fi
fi
if [ "$SKEYFILE" != '' ];then
if [ -f $dwkdir/$SKEYFILE ];then
rcskey=SUCCESS
fi
fi
# -------------
touch brother-drivers/"$0".log
if [ "$infcheck" = 3 ];then
echo "$2"":,${modelnhuc},"$PKG",${dlresult},${lnk_flag}","$SCANNER_DRV"\
,$rccups,$rclpr,$rcscan,$rcskey\
>> brother-drivers/"$0".log
fi
echo "$2"":,${modelnhuc},"$PKG",${dlresult},${lnk_flag}","$SCANNER_DRV"\
,$rccups,$rclpr,$rcscan,$rcskey\
,$LPRFILE,$CUPSFILE,$PDRVFILE,$SCANFILE,$SKEYFILE \
>> brother-drivers/"$0".log
fi
post_install_sweep
post_install_sweep
#DBG_MSG "exit 13"
rmdir "${wkdir}"
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 42 de 58
exit 0
fi
PREPKGCMDC=''
PREPKGCMDL=''
PREPKGCMDP=''
if [ "$PKG" = deb ];then
if [ "$CUPSFILE" != '' ];then
PREPKGCMDC="dpkg -x $CUPSFILE /"
fi
if [ "$PDRVFILE" != '' ];then
PREPKGCMDP="dpkg -x $PDRVFILE /"
fi
if [ "$LPRFILE" != '' ];then
PREPKGCMDL="dpkg -x $LPRFILE /"
fi
fi
post_install_sweep
read answer
echo -e $MONO
read answer
echo -e $MONO
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 43 de 58
gpl_license
if [ ! -f $CUPSFILE ];then
rm -f $CUPSFILE 2> /dev/null
echo wget $WGET_OP $CACHEFLG $URL_PKG/$CUPSFILE
wget $WGET_OP $CACHEFLG $URL_PKG/$CUPSFILE
fi
fi
fi
#--
if [ "$PDRVFILE" != '' ];then
if ! [ -f "$PDRVFILE" ];then
pdrv_complex_license
echo -e $MONO
if [ ! -f $PDRVFILE ];then
rm -f $PDRVFILE 2> /dev/null
echo wget $WGET_OP $CACHEFLG $URL_PKG/$PDRVFILE
wget $WGET_OP $CACHEFLG $URL_PKG/$PDRVFILE
fi
fi
fi
pre_proc
require_386lib=no
if [ "$arch" != 'i386' ];then
require_386lib=yes
if [ "$REQ32LIB" = 'NO' ] || \
[ "$REQ32LIB" = 'No' ] || \
[ "$REQ32LIB" = 'no' ];then
require_386lib=no
fi
fi
DUMMYCUPSYS=0
DUMMYCUPS=0
DUMMYLPD=0
DUMMYLPRNG=0
if ! [ -f /etc/init.d/cupsys ];then
DUMMYCUPSYS=1
ln -s /bin/true /etc/init.d/cupsys
fi
if ! [ -f /etc/init.d/cups ];then
DUMMYCUPS=1
ln -s /bin/true /etc/init.d/cups
fi
if ! [ -f /etc/init.d/lpd ];then
DUMMYLPD=1
ln -s /bin/true /etc/init.d/lpd
fi
if ! [ -f /etc/init.d/lprng ];then
DUMMYLPRNG=1
ln -s /bin/true /etc/init.d/lprng
fi
LPADMIN=lpadmin
LPINFO=lpinfo
mkmodeldir=0
if [ ! -d /usr/share/cups/model ];then
mkdir -p /usr/share/cups/model
mkmodeldir=1
fi
echo $PREPKGCMDP
$PREPKGCMDP
fi
cp $basedir/$LPRFILE $wkdir/$packdir
cd $wkdir/$packdir
cat DEBIAN/control \
| sed s/Depends.*$//g \
| tr -s '\n' \
> DEBIAN/control.tmp
mv -f DEBIAN/control.tmp DEBIAN/control
cd $wkdir
dpkg -b ./$packdir $debfile
echo dpkg -b ./$packdir $debfile
cp $basedir/$CUPSFILE $wkdir/$packdir
cd $wkdir/$packdir
cat DEBIAN/control \
| sed s/Depends.*$//g \
| tr -s '\n' \
> DEBIAN/control.tmp
mv -f DEBIAN/control.tmp DEBIAN/control
cp $basedir/$PDRVFILE $wkdir/$packdir
cd $wkdir/$packdir
cat DEBIAN/control \
| sed s/Depends.*$//g \
| tr -s '\n' \
> DEBIAN/control.tmp
mv -f DEBIAN/control.tmp DEBIAN/control
cd $basedir
sleep 1
if [ "$CUPSFILE" != '' ];then
echo $PKGCMD $CUPSFILE
fi
sleep 1
if [ "$PDRVFILE" != '' ];then
echo $PKGCMD $PDRVFILE
fi
echo -n -e $MONO
fi
install_done=yes
if [ -f "${wkdir}"/brother_linux_brprinter_installer.tmp ];then
csherr=$(cat ${wkdir}/brother_linux_brprinter_installer.tmp | \
grep 'ERROR: csh is required')
rm "${wkdir}"/brother_linux_brprinter_installer.tmp
if [ "$csherr" != "" ];then
echo -e -n $COLOR
echo $MESSAGE250
echo -e $MONO
#DBG_MSG "exit 19"
rmdir "${wkdir}"
exit 0
fi
fi
RAWINSTALLED=no
echo PRINTERNAME=$modelname
break
fi
done
retry=$(($retry+1))
echo -n \#
done
PRINTERNAME=$(echo $CUPSFILE | \
sed s/"^br"//g | \
sed s/"^cupswrapper"//g | \
sed s/"cupswrapper-.*$"//g | \
sed s/"cupswrapperinch-.*$"//g | \
sed s/"cups-.*$"//g | \
sed s/"-.*$"//g | \
sed s/"_.*$"//g | \
tr "[a-z]" "[A-Z]")
fi
else
sleep 1
fi
fi
PPDOPT=''
if [ "$RAWINSTALLED" = 'yes' ];then
for ppd in $(ls /usr/share/ppd/*.ppd /usr/share/cups/model/*.ppd)
do
ppd2=$(echo $ppd | tr -d '-')
prnname=$(echo $PRINTERNAME | tr -d '-')
if [ "$(echo $ppd2 | grep -i $prnname)" != '' ];then
PPDOPT="-P $ppd"
break
fi
done
fi
echo \#
#------------
if [ "$DUMMYCUPS" = 1 ];then
if [ "$(ls -al /etc/init.d/cups 2> /dev/null | grep ^l )" != '' ];then
rm -f /etc/init.d/cups 2> /dev/null
fi
fi
if [ "$DUMMYCUPSYS" = 1 ];then
if [ "$(ls -al /etc/init.d/cupsys 2> /dev/null | grep ^l )" != '' ];then
rm -f /etc/init.d/cupsys 2> /dev/null
fi
fi
if [ "$DUMMYLPD" = 1 ];then
if [ "$(ls -al /etc/init.d/lpd 2> /dev/null | grep ^l )" != '' ];then
rm -f /etc/init.d/lpd 2> /dev/null
fi
fi
if [ "$DUMMYLPRNG" = 1 ];then
if [ "$(ls -al /etc/init.d/lprng 2> /dev/null | grep ^l )" != '' ];then
rm -f /etc/init.d/lprng 2> /dev/null
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 50 de 58
fi
fi
#------------
# for SuSE 64
if [ "$arch" != "i386" ];then
if [ -d "$LIB64FLT" ] && [ -d "$LIBFLT" ] ;then
filter=$(ls $LIBFLT 2> /dev/null | grep -i $PRINTERNAME | head -n 1 )
filter64=$(ls $LIB64FLT 2> /dev/null | grep -i $PRINTERNAME | head -n 1 )
if [ "$filter" != '' ] && [ "$filter64" = '' ];then
echo cp "$LIBFLT"/$filter "$LIB64FLT"
cp "$LIBFLT"/$filter "$LIB64FLT"
echo -n -e $COLOR4
echo $LPADMIN -p $PRINTERNAME -E $PPDOPT
echo -n -e $MONO
$LPADMIN -p $PRINTERNAME -E $PPDOPT
rm64filter="rm -f $LIB64FLT/$filter"
fi
fi
fi
## /usr/lib32
LPRPKGNAME=$(echo $LPRFILE |\
sed s/"_.*$"//g |\
sed s/"-.*$"//g)
pkgpostfix=''
files=""
fi
fi
#--------------------------------
# make uninstall script
uninstaller_prn=uninstaller_${PRINTERNAME}
rm -f $uninstaller_prn 2> /dev/null
echo "#! /bin/bash" > $uninstaller_prn
echo "#RM_SELINUX_RULE=enable" >>$uninstaller_prn
if [ -d '/usr/lib32' ];then
if [ ! -f "$pathlib32lib" ]; then
if [ "$pathlib" != '' ] && [ "$pathlib32lib" != '' ];then
echo ln -s $pathlib $pathlib32lib
ln -s $pathlib $pathlib32lib
echo "rm -f $pathlib32lib" >> $uninstaller_prn
fi
fi
fi
done
## /usr/lib32 symlink
## /lib/lib32 symlink
# AppArmor
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 52 de 58
# for SELinux
cupsd_rw_etc_t '/usr/local/Brother/Printer/(.*/)?inf(/.*)?'
bin_t '/usr/local/Brother/Printer/(.*/)?inf/brprintconf(.*)?'
bin_t '/usr/local/Brother/Printer/(.*/)?lpd(/.*)?'
bin_t '/usr/local/Brother/Printer/(.*/)?cupswrapper(/.*)?'
bin_t '/usr/local/Brother'
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 53 de 58
cupsd_rw_etc_t '/usr/local/Brother/inf(/.*)?'
bin_t '/usr/local/Brother/lpd(/.*)?'
bin_t '/usr/local/Brother/cupswrapper(/.*)?'
bin_t '/opt/brother'
cupsd_rw_etc_t '/etc/opt/brother'
cupsd_rw_etc_t '/opt/brother/Printers/(.*/)?inf(/.*)?'
cupsd_rw_etc_t '/etc/opt/brother/Printers/(.*/)?inf(/.*)?'
bin_t '/opt/brother/Printers/(.*/)?lpd(/.*)?'
bin_t '/opt/brother/Printers/(.*/)?cupswrapper(/.*)?'
%%selinux_rules%%
if [ -e $LIBFLT ] ;then
echo restorecon -RFv $LIBFLT
restorecon -RFv $LIBFLT
fi
if [ -e $LIB32FLT ] ;then
echo restorecon -RFv $LIB32FLT
restorecon -RFv $LIB32FLT
fi
if [ -e $LIB64FLT ] ;then
echo restorecon -RFv $LIB64FLT
restorecon -RFv $LIB64FLT
fi
echo setsebool -P cups_execmem 1
setsebool -P cups_execmem 1
echo " echo setsebool -P cups_execmem 0" >> $uninstaller_prn
echo " setsebool -P cups_execmem 0" >> $uninstaller_prn
fi
if [ "$RAWINSTALLED" = no ];then
echo -e -n $COLOR$MESSAGE190 #"Will you specify the Device URI\? [y/N] ->"
read answer
echo -e $MONO
else
answer=Y
fi
autodurin=""
for deviceuri in $duri
do
prnn2=$(echo $PRINTERNAME | tr -d '-' | tr "[A-Z]" "[a-z]")
duri2=$(echo $deviceuri | tr -d '-' | tr "[A-Z]" "[a-z]")
if [ "$(echo $duri2 | grep 'usb://brother' |grep $prnn2 2>/dev/null )" \
!= '' ];then
autodurin=$i
autoduris=$deviceuri
break
else
i=$(($i+1))
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 54 de 58
fi
done
i=0
for deviceuri in $duri
do
echo $i: $deviceuri
i=$(($i+1))
done
echo -e $i "(I)": $MESSAGE200 #"Specify IP address."
i=$(($i+1))
echo -e $i "(A)": $MESSAGE201 "("$autoduris")" #"Auto."
echo -e $MONO
if [ "$answer" = "$((i-1))" ] || \
[ "$answer" = 'IP' ] || \
[ "$answer" = 'ip' ] || \
[ "$answer" = 'Ip' ] || \
[ "$answer" = 'i' ] || \
[ "$answer" = 'I' ];then
echo -e -n $COLOR$MESSAGE220 #" enter IP address ->"
read ipadrs
echo -n -e $COLOR4
echo $LPADMIN -p $PRINTERNAME -v socket://$ipadrs -E $PPDOPT
echo -e -n $MONO
$LPADMIN -p $PRINTERNAME -v socket://$ipadrs -E $PPDOPT
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 55 de 58
deviceuri=socket://$ipadrs
elif [ "$answer" = "$i" ] || \
[ "$answer" = 'A' ] || \
[ "$answer" = 'a' ] || \
[ "$answer" = 'Auto' ] || \
[ "$answer" = '' ] ;then
echo -n -e $COLOR4
echo $LPADMIN -p $PRINTERNAME -v $autoduris -E $PPDOPT
echo -n -e $MONO
$LPADMIN -p $PRINTERNAME -v $autoduris -E $PPDOPT
deviceuri=$autoduris
elif [ "$answer" = 'F' ] || [ "$answer" = 'f' ];then
echo -n -e $COLOR4
echo $LPADMIN -p $PRINTERNAME -v file:///tmp/printdata.prn -E $PPDOPT
echo -n -e $MONO
$LPADMIN -p $PRINTERNAME -v file:///tmp/printdata.prn -E $PPDOPT
deviceuri="file:///tmp/printdata.prn"
else
i=0
for deviceuri in $duri
do
if [ "$i" = "$answer" ];then
echo -e -n $COLOR4
echo $LPADMIN -p $PRINTERNAME -v $deviceuri -E $PPDOPT
echo -e -n $MONO
$LPADMIN -p $PRINTERNAME -v $deviceuri -E $PPDOPT
break
fi
i=$(($i+1))
done
fi
elif [ "$answer" = "file" ] || [ "$answer" = "File" ]; then
echo -e -n $COLOR4
echo $LPADMIN -p $PRINTERNAME -v file:///tmp/printdata.prn -E $PPDOPT
echo -e -n $MONO
$LPADMIN -p $PRINTERNAME -v file:///tmp/printdata.prn -E $PPDOPT
fi
if [ -e /usr/lib32/cups/filter ];then
if [ ! -e /usr/lib32/cups/filter/brfaxfilter ];then
cp /usr/lib/cups/filter/brfaxfilter /usr/lib32/cups/filter/brfaxfilter
fi
chmod 755 /usr/lib32/cups/filter/brfaxfilter
fi
if [ -e /usr/lib64/cups/filter ];then
if [ ! -e /usr/lib64/cups/filter/brfaxfilter ];then
cp /usr/lib/cups/filter/brfaxfilter /usr/lib64/cups/filter/brfaxfilter
fi
chmod 755 /usr/lib64/cups/filter/brfaxfilter
fi
if [ -f /etc/init.d/cups ];then
/etc/init.d/cups restart
elif [ -f /etc/init.d/cupsys ];then
/etc/init.d/cupsys restart
else
service cups restart
fi
fi
Arquivo: /home/rigo/Auxiliar/linux-brprinter-installer-2.2.3-1 Página 56 de 58
if [ -f $TESTPRINT ];then
echo lpr -P $PRINTERNAME $TESTPRINT
lpr -P "$PRINTERNAME" "$TESTPRINT"
elif [ -f $TESTPRINT2 ];then
echo lpr -P $PRINTERNAME $TESTPRINT2
lpr -P "$PRINTERNAME" "$TESTPRINT2"
else
echo "echo $PRINTERNAME \| lpr -P $PRINTERNAME"
echo "$PRINTERNAME" | lpr -P "$PRINTERNAME"
fi
fi
LPRPKGNAME=$(echo $LPRFILE |\
sed s/"_.*$"//g |\
sed s/"-.*$"//g)
CUPSPKGNAME=$(echo $CUPSFILE |\
sed s/"_.*$"//g |\
sed s/"-.*$"//g)
PDRVPKGNAME=$(echo $PDRVFILE |\
sed s/"_.*$"//g |\
sed s/"-.*$"//g)
#
#rm cupswrapper driver
if [ "$CUPSPKGNAME" != '' ];then
echo "$PREPKGCMDC" >>$uninstaller_prn
echo "$RMPKGCMD $CUPSPKGNAME""$pkgpostfix" >>$uninstaller_prn
fi
#
#rm lpd driver
if [ "$LPRPKGNAME" != '' ];then
echo "$PREPKGCMDL" >>$uninstaller_prn
echo "$RMPKGCMD $LPRPKGNAME""$pkgpostfix" >>$uninstaller_prn
fi
if [ "$DUMMYCUPS" = 1 ] || \
[ "$DUMMYCUPSYS" = 1 ] || \
[ "$DUMMYLPD" = 1 ] || \
[ "$DUMMYLPRNG" = 1 ];then
fi
pre_proc
scanner_install # scanner
post_proc