Professional Documents
Culture Documents
DIN EN 10243-1 With Corr1
DIN EN 10243-1 With Corr1
National foreword
This standard has been prepared by ECISS/TC 28.
The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Steel
and Iron Standards Committee).
Amendments
DIN 7526, January 1969 edition, has been superseded by the specifications of EN 10243-1 and EN 10243-2.
Previous edition
DIN 7526: 1969-01.
Continued overleaf.
EN comprises 39 pages.
© No part of this standard may be reproduced without the prior permission of Ref. No. DIN EN 10243-1 : 2000-06
DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, English price group 14 Sales No. 1114
has the exclusive right of sale for German Standards (DIN-Normen).
10.00
EN 10243-1
September 1999
ICS 77.140.85
Descriptors:
English version
ÈÉË
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
© 1999. CEN – All rights of exploitation in any form and by any means Ref. No. EN 10243-1 : 1999 E
reserved worldwide for CEN national members.
Page 2
EN 10243-1 : 1999
2
3
4
4
4
5
5
5
6
8
8
8
10
19
20
20
23
23
23
23
23
24
24
24
24
30
Page 3
EN 10243-1 : 1999
Page 4
EN 10243-1 : 1999
Page 5
EN 10243-1 : 1999
Page 6
EN 10243-1 : 1999
Page 7
EN 10243-1 : 1999
Page 8
EN 10243-1 : 1999
Page 9
EN 10243-1 : 1999
Page 10
EN 10243-1 : 1999
Page 11
EN 10243-1 : 1999
Page 12
EN 10243-1 : 1999
Page 13
EN 10243-1 : 1999
Page 14
EN 10243-1 : 1999
Page 15
EN 10243-1 : 1999
Page 16
EN 10243-1 : 1999
Page 17
EN 10243-1 : 1999
Page 18
EN 10243-1 : 1999
Eccentricity
Total tolerance
Page 19
EN 10243-1 : 1999
Page 20
EN 10243-1 : 1999
Page 21
EN 10243-1 : 1999
Page 22
EN 10243-1 : 1999
Trim Shape
complexity
line factor
Mass (kg)
Trimmed flat (–)
Straight or symmetric
Nominal dimensions
Mismatch
Asymmetric
Above-to
(incl) Tolerances 1)
Section
Page 39
EN 10243-1 : 1999