Professional Documents
Culture Documents
Triac
Triac
Triac
2/2
The gate current required to trigger a BT136 triac depends on various factors, such as the
load current, the trigger voltage, and the triac's sensitivity. However, in general, the minimum
gate current required to trigger a BT136 triac is around 10-15 milliamperes (mA).
It's important to note that the gate current required to trigger the triac may vary depending
on the application and the circuit configuration. Therefore, it is always recommended to
refer to the datasheet provided by the manufacturer for accurate information on the triac's
gate trigger characteristics.
The BT136 is a 600V, 4A Triac designed for general-purpose applications such as dimming,
phase control, motor speed control, and AC switching. If you need an alternative to the
BT136 Triac that can handle up to 2500 watts of power, you may consider the following
Triacs:
1. BTA41-600B: This is a 600V, 40A Triac that can handle up to 2500 watts of power. It is
suitable for high power applications such as AC motor control, lighting, and heating
control.
2. TIC226D: This is a 600V, 8A Triac that can handle up to 1920 watts of power. It is
suitable for medium to high power applications such as AC motor control, lighting, and
heating control.
3. Q4008L4: This is a 800V, 8A Triac that can handle up to 3200 watts of power. It is
suitable for high power applications such as AC motor control, lighting, and heating
control.
ChatGPT Feb 13 Version. Free Research Preview. Our goal is to make AI systems more natural and safe to interact with. Your feedback
will help us improve.
It's important to note that selecting the right Triac for your application depends on various