Professional Documents
Culture Documents
PROTODUR 303.0 en
PROTODUR 303.0 en
0
Self-hardening powder urea-formaldehyde glue with medium reactivity, for hot
bonding or by high frequency. Low formaldehyde content that fulfils the
requirements of the E1 class.
CHARACTERISTICS *
Appearance powder
Colour white
Product of condensation of urea and
Base
formaldehyde
Pag. 1
Dissolve PROTODUR 303.0 in the ratio of 10 kg of glue and 5 kg of water. The pot life of the
adhesive mixture is approximately 3 hours at 20°C.
Protodur 303.0 is suitable for bonding different types of wood because of its formulation
and its high yield.
When bonding difficult-to-bond kinds of wood, the water based polyvinylacetate glue
PROTOVIL VP 420 can be added to the adhesive mixture up to 15% by weight.
The gel time for an adhesive mixture made by 100 parts of Protodur 303.0 and 50 parts of
water are depending on the temperature. Practical figures are:
Protodur 303.0 is a product from the condensation of urea and formaldehyde and
therefore can cause allergy by skin contact. An adequate ventilation of the workplace
must be provided to avoid the mucosal irritation than can be caused by the
formaldehyde.
Refers to the Material Safety Data Sheet for further information.
For all matters not covered in this Technical Sheet, refer to our General Sales Conditions
and to the advice of our Technical Sales Dept. .
All information and recommendations in this bulletin are based upon practical experience and they don’t exempt our customers
to make tests when they receive the goods. We can bring changes to our characteristic details of our products in according with
the technical and productive development. All information in this bulletin request some tests, because there are many details
which are not verifiable during the working from us, particularly when you use raw materials of other suppliers. Our suggestions
don’t exempt you to check and in any case to resolve the problem when there is a possible violation of patents of other suppliers.
Pag. 2