Professional Documents
Culture Documents
Required On Site
Required On Site
SF/100 Salt Spray 230V 13 Amp All cabinets All cabinets All cabinets
require oil free, require mains require drain/
SF/200 Salt Spray 230V 13 Amp clean water 1 - 3 Bar vent pipe from
compressed air 14psi to 42psi, base of cabinet
SF/450 Salt Spray 230V 13 Amp 2 - 4 Bar, 28psi low calcium tds 1¼“ diameter
56psi with a content. 35mm O.D.
SF/1000 Salt Spray 230V 16 Amp flow rate 1.8 Connection 3/8” (1 3/8 O.D.)
cfm. Connection (9.3mm) I.D. with fall to allow
SF/2000 Salt Spray 230V 16 Amp 3/8” (9.3mm) Hose. complete
I.D. Hose. drainage and
SF/100/CCT 230V 13 Amp Isolation tap to be venting.
If a mains fitted close to the
SF/200/CCT 230V 13 Amp supply an inline cabinet. Drain needs to
regulator is be at floor level.
SF/450/CCT 230V 13 Amp required to Non return valve
reduce pressure to be fitted in line Cabinet needs
SF/1000/CCT 230V 25 Amp to between 2 re water authority to be against
and 4 Bar. requirements, to outside wall for
SF/2000/CCT 380V 16 Amp prevent back flow vent to
Isolation valve of water. atmosphere.
SF/450/CCT/VH 230V 25 Amp required close
to cabinet.
SF/1000/CCT/VH 380V 16 Amp