Professional Documents
Culture Documents
Chute Specs
Chute Specs
Chute Specs
Axel Thoms
Lebensrettungseinrichtungen GmbH
Introduction
Axel Thoms Lebensrettungseinrichtungen has supplied Escape Chutes
for many international clients.
We produce and supply Escape Chutes for more than 39 years.
1.0 Specifications
Chute Construction:
The Escape chutes consist of two layers, outside layer and inner spiral
sliding layer.
All layers are UVA and water resistant.
All layers are certified according to OEkotex 100 standard – free from
hazardous contents.
Page 2 of 6
Escape Chute AT-1
Page 3 of 6
Escape Chute AT-1
The Escape Chute frames shall be made from quality steel (S235JR)
for best load capacity and with powder coating finish for long lifetime.
All connecting parts (bolts, screws, steel cables) shall be stainless steel.
A detailed report about the load capacity of the escape chute frame
design from TÜV is available, to certify the conformity with health and
safety requirements (analogue to elevator regulations).
2.7 Production
The manufacturing facility for the Escape Chutes has to be the vendors
own facility. Made in Germany.
TUV certificate on the inspection of the manufacturer’s product
manufacturing facility shall be provided.
The supplier and manufacturer shall be the same legal entity and the
entity shall be the holder of the certificate.
Page 4 of 6
Escape Chute AT-1
Official TUV statement and certification for practical test about the
sliding behaviour
Page 5 of 6
Escape Chute AT-1
Axel Thoms
Lebensrettungseinrichtungen GmbH
Bimoehlerstrasse 32-36 - PO Box 1155
24576 Bad Bramstedt
Germany
Tel. ++49 4192 2010090
Fax ++49 4192 818883
info@escape-chute.net
www.escape-chute.net
Page 6 of 6