Professional Documents
Culture Documents
SLM Listrik Statis 2223 Bil H 230908 080910 230911 112929
SLM Listrik Statis 2223 Bil H 230908 080910 230911 112929
3. Particle A of charge = 2 μC, B = - 9 µC, and C = - 16 μC are placed 9. The diagram below shows two charges – q and +2q placed at
in the vertices of a right angle triangle, as shown below: points A and B. Given q = 1 nC, then the work done to move a
charge of 8q from C to D is …
The Coulomb force acting on A due
A Length AB = AD = BD = 8 cm. CD
to the particles is … N.
A. 180√2 is the altitude (garis tinggi).
B. 180
C A. 150 nJ
C. 90√2 D
B. 300 nJ
D. 90
C. 400 nJ
E. 45√2
D. 450 nJ
E. 900 nJ
B
4. Two like charges Q of mass 3 mg are hung and they are
stationary as shown in figure below:
10. An electron was initially moving with the velocity of 2.106 m/s
from the positive plate until it stops when it reaches the
106o negative plate, as seen in the
figure below.
(-) (+) The distance between plates is
E 0.6 cm, the mass of electron =
9 x 10-31 kg, and the charge of
The length of the thread is 15/8 cm. The value of Q … nC. electron = 2 x 10-19 C. The
A. 2 e- magnitude of the electric field
B. 0,2 strength E between the two
C. 4 plates is … N/C.
D. 0,4 A. 1000
E. 0,3 B. 1500
C. 2000
5. Two charges, - 16 C and 36 C, are 20 cm away. The position D. 3000
of a point where the resultant of electric field strength is zero E. 5000
will be located … cm from the 36-C charge.
A. 8. C. 40
B. 20 D. 60 E. 80 11. The electric field strength at a point located 20 cm from the
surface of a sphere conductor of radius 10 cm is 40 N/C. Find
6. Two charges are placed in the diagram below: the potential difference between 2 points, one point located
30 cm from the centre of the sphere and the other located 5
cm from the centre of the sphere!
1H
A. 12 volt 3. The electric field between the two plates after the plastic
B. 24 volt material is inserted will be larger than before.
C. 36 volt The correct statement(s) …
D. 60 volt A. 1,2,3 B. 1,3 C. 1,2 D. 1 only E. 2,3
E. 72 volt
14. In the combination of capacitors below:
12. The factors that will affect the capacitance of a charged
capacitor are:
1) The dielectric constant, 𝜀𝑟
2) The thickness of the plates
3) The area of the plates
4) The potential difference between the two plates
2H