The document discusses specifications for various mechanical equipment for a building project including:
1) A passenger elevator with a capacity of 900/1050kg and features like automatic rescue devices.
2) Air conditioning units including wall mounted, cassette, and ducted indoor units as well as ceiling and sirocco outdoor units.
3) Exhaust fans with 120CMH air volume and 8-10 watts power.
4) Ductwork to match design drawings.
5) Power cables including NYY and NYM multicore cables.
6) Control cables between indoor and outdoor AC units using shielded 18AWG 2 pair cable.
The document discusses specifications for various mechanical equipment for a building project including:
1) A passenger elevator with a capacity of 900/1050kg and features like automatic rescue devices.
2) Air conditioning units including wall mounted, cassette, and ducted indoor units as well as ceiling and sirocco outdoor units.
3) Exhaust fans with 120CMH air volume and 8-10 watts power.
4) Ductwork to match design drawings.
5) Power cables including NYY and NYM multicore cables.
6) Control cables between indoor and outdoor AC units using shielded 18AWG 2 pair cable.
The document discusses specifications for various mechanical equipment for a building project including:
1) A passenger elevator with a capacity of 900/1050kg and features like automatic rescue devices.
2) Air conditioning units including wall mounted, cassette, and ducted indoor units as well as ceiling and sirocco outdoor units.
3) Exhaust fans with 120CMH air volume and 8-10 watts power.
4) Ductwork to match design drawings.
5) Power cables including NYY and NYM multicore cables.
6) Control cables between indoor and outdoor AC units using shielded 18AWG 2 pair cable.
The document discusses specifications for various mechanical equipment for a building project including:
1) A passenger elevator with a capacity of 900/1050kg and features like automatic rescue devices.
2) Air conditioning units including wall mounted, cassette, and ducted indoor units as well as ceiling and sirocco outdoor units.
3) Exhaust fans with 120CMH air volume and 8-10 watts power.
4) Ductwork to match design drawings.
5) Power cables including NYY and NYM multicore cables.
6) Control cables between indoor and outdoor AC units using shielded 18AWG 2 pair cable.
mm, Panjang 6.150 mm, Tinggi 2.600 mm PEKERJAAN MEKANIKAL 1 Transportasi Vertikal Type Passenger Otis (CCO China), Sistem Duplex Mitshubisi (CCo Kapasitas 900/1050 kg Thailand / MJEE), Driver system ACVVVF Power 6,3kW 380 50 Hz Speed 60 mpm Door type 2-Panel center opening Door opening size 800x2100mm Hoist way 1900x21000mm Floor service 7 floor Features : Automatic Rescue Emergency Device, Car Door Protection, Emergency Firemen Operation, Attendant Operation, Eartquake Sensor, Regenerative Drive. CCTV Cable (IP base) Car Transom Hairline Stainless steel Car Door Hair stainless steel Handrailing 3 sisi. 2 Tata Udara a. Unit Air conditioner Indoor : Model : VRF System Wall mounted Ceiling casette round Daikin,Thosiba, Carrier flow Ceiling High static duct Outdoor : Daikin,Thosiba, Carrier VRF System Ceiling Type Sirocco Type dengan 3 Exhaust Fan Outlet pipa dia. 4 inch KDK, CKE, Kruger Air volume 120 CMH Daya 8-10 watt Perforated alumunium 4 SAD, EAG dan FAG Dimensi menyesuaikan Lokal gambar rencana 5 Kabel Power NYY Multi Core Supreme, Kabelindo, NYM Multi Core Kabel Metal 6 Kabel Kontrol antar AWG Shielded 18 2 Pair Belden,Supreme indoor dan outdoor