Professional Documents
Culture Documents
Prototyping Flyer Web
Prototyping Flyer Web
Prototyping Flyer Web
1 2 3
Peel the white protective coating off of your Place artwork on board Secure artwork with an acrylic weight
Presensitized Copper Clad Board (600 Series)
4 5 6
Expose board for 10 minutes using a 15W Dilute the developer 1:10 with water. Put on rubber gloves. Peel protective covering
daylight fluorescent bulb 6 inches above the and place your exposed board in the diluted
board. developer solution. Brush lightly with smoother
brush until exposed resist is removed. (1 - 2
min)
7 8 9
Rinse board in water. Dispose of the residue Place board in Ferric Chloride until the Rinse board in water to finish your board.
solution properly. unprotected copper is removed and your artwork Dispose of the residue etchant according to your
becomes visible on the board. (10 - 15 min). local regulations.
use the Economy Etching Kit