Professional Documents
Culture Documents
TD-esc-02-De-En-16-011 Rev000 Change Back To Original Maintenance Cycle BSO Safety Catch For Work Platform
TD-esc-02-De-En-16-011 Rev000 Change Back To Original Maintenance Cycle BSO Safety Catch For Work Platform
TD-esc-02-De-En-16-011 Rev000 Change Back To Original Maintenance Cycle BSO Safety Catch For Work Platform
Scope of application
This document applies to: International
Mechanical Induction Installation Update Precast concrete tower – Installation
Electrical Rotor blade Grid connection Concrete repair Precast concrete tower – Prestressing
Document details
Document ID TD-esc-02-de-en-16-011 Rev000 Change back to original maintenance cycle BSO safety
catch for work platform
Confidentiality INTERNAL
Revision table
Revision Date Section Change
TD-esc-02-de-en-16-011 Rev000 Change back to original maintenance cycle BSO safety catch for work platform i of i
Technical Information
Change back to original maintenance cycle BSO safety catch
for work platform
1 General information
The photos/figures in this document serve as illustrations and may differ from the actual compo-
nents.
3 Overview of change
From now on, the BSO safety catches for work platforms are to be inspected and provided with an
inspection label by maintence personnel every 12 months.
The inspection dates on the BSO safety catches for work platforms available at the construction
site or in the service vehicles still have to be respected even if the devices were only approved for
six months.
TD-esc-01-de-xx-10-037 Rev003a
“Inspecting the BLOCSTOP safety catch”
TD-esc-02-de-en-16-003 Rev000 Change back to original maintenance cycle BSO safety catch for work platform 1 of 2
Technical Information
Change back to original maintenance cycle BSO safety catch
for work platform
Designation SAP
Work platform, inside CAT 500 154890
RBWL GREIFZUG UVM10 w/ trailer 50Hz 101377
RBWL GREIFZUG UVM10 w/o trailer 50Hz 117964
RBWL GREIFZUG UVM10 w/o trailer 60Hz 120500
RBWL GREIFZUG UVM8 w/o trailer 50Hz 91470
Work platform, GREIFZUG C5 1L 81733
Work platform, GREIFZUG C5 2L 53145
Man basket K5 GREIFZUG 91458
Safety catch BSO 520 ICA Proj. 9mm Greifzug® 143356
Safety catch BSO 520 E ICA Proj. 9mm Greifzug 158642
Safety catch BSO 1020 9mm (UVM 8) Greifzug® 49915
Safety catch BSO 1030 10mm (UVM 10)Greifzug® 137842
4 Point of contact
Service technicians Technical Service Dispatch
Technical Service Dispatch in charge Operating Equipment Department
TD-esc-02-de-en-16-003 Rev000 Change back to original maintenance cycle BSO safety catch for work platform 2 of 2