Professional Documents
Culture Documents
Dynamic Joist Setup
Dynamic Joist Setup
Dynamic Joist Setup
- Remove the “/*” characters before the “L” shape under steel shapes:
o Before: /*L !L ! ! ! 2! 3! ! !
o After: L !L ! ! ! 2! 3! ! !
* Note: An example file has been provided with this package located in the “Profile” folder.
* Warning: A bug in Tekla Structures has been identified when enabling parametric L shapes. It could
cause Tekla Structures to crash. Tekla is currently looking into the issue. The current fix is to
disable one of the other less used parametric shapes in the “profitab.inp” file. The recommended
shape to disable is the “EW” shape. Please see the example below:
5) Copy the project support files to any projects using Dynamic Joist®.
- Copy the “NMBS_Joist.txt” file in the “Project” folder to:
<Drive>:\<Model Folder>\<Project Folder>\
Note: Dynamic Joist® should now be available in the component catalog. It is labeled as “NMBS Dynamic Joist”.
Warning:
The security built within the Windows operating system could prevent Tekla Structures from loading the
Dynamic Joist® component. If you received errors when trying to load the component, please follow these
steps for a possible solution.
5) If the file has been blocked, an “Unblock” button will be present in the attributes section.
9) Start Tekla Structures and try loading the Dynamic Joist® plugin.