This document provides a design challenge to create a GD&T drawing of a bracket based on design intent. Key details include using two fastening holes as the datum reference frame and controlling the position of a mounting hole and top mounting surface through profile tolerances. The hints suggest using the two fastening holes and mounting surface to create the datum reference frame and using profile tolerances to control critical surfaces like the mounting hole position and top surface form and orientation.
This document provides a design challenge to create a GD&T drawing of a bracket based on design intent. Key details include using two fastening holes as the datum reference frame and controlling the position of a mounting hole and top mounting surface through profile tolerances. The hints suggest using the two fastening holes and mounting surface to create the datum reference frame and using profile tolerances to control critical surfaces like the mounting hole position and top surface form and orientation.
This document provides a design challenge to create a GD&T drawing of a bracket based on design intent. Key details include using two fastening holes as the datum reference frame and controlling the position of a mounting hole and top mounting surface through profile tolerances. The hints suggest using the two fastening holes and mounting surface to create the datum reference frame and using profile tolerances to control critical surfaces like the mounting hole position and top surface form and orientation.
Design Challenge : Make GD&T drawing of bracket based on Design Intent
These two are Fastening holes
This back surface is
mating surface with interface part
Mounting Features
1. Position of this mounting
hole with respect to fastening holes is important 2. Top mounting surface is also important and has to be controlled . Especially form and orientation Hints: 1. Create Datum Reference Frame using the two fastening holes and mounting surface 2. Profile can be used to control surfaces