Professional Documents
Culture Documents
Structural Analysis
Structural Analysis
STRUCTURAL ANALYSIS
AND DESIGN REPORT
PROPOSED OFFICE
WAREHOUSE WITH
MEZZANINE
I. PROJECT DETAILS
Concrete – reinforced concrete design shall be in accordance with NSCP 2015. The specified minimum
compressive strength of the concrete by cylinder test at 28days age shall be as follows:
Foundation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20.7MPa (3000PSI)
Beams - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20.7MPa (3000PSI)
Columns - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20.7MPa (3000PSI)
Suspended Slab - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20.7MPa (3000PSI)
Slab on Grade - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20.7MPa (3000PSI)
Lean Concrete - - - - - - - - - - - - - - - - - - - - - - - - - - - - -10.0MPa (1450PSI)
Structural Steel – All structural steel such as wide flange, angles, channels, pipes and plates shall conform to
ASTM A36 or equivalent with minimum yield strength of 248MPa.
Anchor Bolt – Anchor Bolt shall conform to ASTM 325 or equivalent. Anchor bolt shall be designed for maximum
tensile stress of 140MPa on the tensile stress area of the bolt.
STRUCTURAL ANALYSIS
& DESIGN REPORT
Dead Loads (DL) – consist of the weight of all materials of construction incorporated into the building or other
structure, including but not limited to walls, floors, roofs, ceilings, stairways, finishes, cladding and other similarly
incorporated architectural and structural items, and fixed service equipment, including the weight of cranes.
STRUCTURAL ANALYSIS
& DESIGN REPORT
Live Loads (LL) – shall be the maximum loads expected by the intended use or occupancy but in no case shall
be less than the loads required by this section.
Z
STRUCTURAL ANALYSIS
& DESIGN REPORT
STRUCTURAL ANALYSIS
& DESIGN REPORT
V. LOAD COMBINATIONS
STRUCTURAL ANALYSIS
& DESIGN REPORT
VI. GEOMETRY
Dead Load
1) Selfweight
Steel unit weight = 76.82 kN/m3
Concrete unit weight = 23.60 kN/m3
Tie
Floor Load Units MEZZANINE Roof Bea
ms
100mm thk Slab kN/m2 2.40 -
Floor finish kN/m2 0.77 -
Toppings kN/m2 0.60 -
Ceiling kN/m2 0.20 0.10
Ducting/MEPF kN/m2 0.10 0.20
Interior Partition kN/m2 0.50 -
Roof framing kN/m2 - 0.41
Roofing Sheet kN/m2 - 0.10 0
4.57 0.81