Professional Documents
Culture Documents
Standardised Thicknesses of Steel Sheets and Strips - 0200007 - Ben
Standardised Thicknesses of Steel Sheets and Strips - 0200007 - Ben
Standardised Thicknesses of Steel Sheets and Strips - 0200007 - Ben
02 - 00 - 007 / - - B
This document has to be considered as a whole, the parts of which shall not be separated.
« Seul le texte français fait foi, les traductions n’étant faites que pour en faciliter l’emploi ».
“The French text alone is valid. The translations are provided to assist the reader in understanding the
standards”.
© RENAULT 2013.
No duplication permitted without the consent of the issuing department.
No circulation permitted without the consent of RENAULT.
FIRST ISSUE
September 2002 --- This issue originates from Draft NC 2001 0290 / - - A.
REVISION
FOREWORD
1. SCOPE
This standard sets standardised thicknesses for the design of parts made of strips and sheets or steel
strips for any new project from J77.
These are current product thicknesses, which are compatible with the manufacturing methods and
technologies implemented by RENAULT and NISSAN and its main Suppliers.
2. STANDARDISED THICKNESSES
The standardized thicknesses are set in the tables. In the case of pre-coated products, the values
indicated in the tables correspond to nominal thicknesses for uncoated sheets and strips.
Cold-rolled sheets
Class 1 Class 2 Class 3 Class 4
Nominal Ts ≤ 440 MPa Ts [440 - 480] Ts [480 - 580] Ts > 580 MPa
Low carbon and XE280D, XE320D XE360D and XE360B, XE450B,
rephosphorized XE300B XE 450T and
steels 22MnB5
0.4 ± 0.03 ± 0.035 ± 0.04 ± 0.05
0.5 ± 0.03 ± 0.035 ± 0.04 ± 0.05
0.55 ± 0.03 ± 0.035 ± 0.04 ± 0.05
0.6 ± 0.03 ± 0.04 ± 0.05 ± 0.06
0.65 ± 0.03 ± 0.04 ± 0.05 ± 0.06
0.7 ± 0.03 ± 0.04 ± 0.05 ± 0.06
0.75 ± 0.03 ± 0.04 ± 0.05 ± 0.06
0.8 ± 0.04 ± 0.045 ± 0.055 ± 0.065
0.85 ± 0.04 ± 0.045 ± 0.055 ± 0.065
0.9 ± 0.04 ± 0.045 ± 0.055 ± 0.065
0.95 ± 0.04 ± 0.045 ± 0.055 ± 0.065
1 ± 0.04 ± 0.045 ± 0.055 ± 0.065
1.1 ± 0.04 ± 0.045 ± 0.055 ± 0.065
1.2 ± 0.05 ± 0.055 ± 0.065 ± 0.075
1.3 ± 0.05 ± 0.055 ± 0.065 ± 0.075
1.4 ± 0.05 ± 0.055 ± 0.065 ± 0.075
1.5 ± 0.06 ± 0.07 ± 0.08 ± 0.09
1.6 ± 0.06 ± 0.07 ± 0.08 ± 0.09
1.7 ± 0.06 ± 0.07 ± 0.08 ± 0.09
1.8 ± 0.06 ± 0.07 ± 0.08 ± 0.09
1.9 ± 0.06 ± 0.07 ± 0.08 ± 0.09
2.0 ± 0.06 ± 0.07 ± 0.08 ± 0.09
2.1 ± 0.09 ± 0.11 ± 0.12 ± 0.14
2.2 ± 0.09 ± 0.11 ± 0.12 ± 0.14
2.3 ± 0.09 ± 0.11 ± 0.12 ± 0.14
2.4 ± 0.09 ± 0.11 ± 0.12 ± 0.14
2.5 ± 0.09 ± 0.11 ± 0.12 ± 0.14
2.6 ± 0.11 ± 0.13 ± 0.14 ± 0.17
2.7 ± 0.11 ± 0.13 ± 0.14 ± 0.17
2.8 ± 0.11 ± 0.13 ± 0.14 ± 0.17
2.9 ± 0.11 ± 0.13 ± 0.14 ± 0.17
3.0 ± 0.11 ± 0.13 ± 0.14 ± 0.17
Hot-rolled sheets
Class 1 Class 2 Class 3 Class 4
Nominal Ts ≤ 440 Mpa Ts [440 - 570] Ts ≥ 570 MPa
Low carbon steels HE320D, HE320M HE400M, HE450M, HE660M
and HE280M and HE360D HE620M HE830M
and 22MnB5
1.2 ± 0.1 ± 0.1
1.3 ± 0.1 ± 0.1
1.4 ± 0.1 ± 0.1 ± 0.13
1.5 ± 0.1 ± 0.1 ± 0.13 ± 0.15
1.6 ± 0.1 ± 0.11 ± 0.13 ± 0.15
1.7 ± 0.1 ± 0.11 ± 0.13 ± 0.15
1.8 ± 0.1 ± 0.11 ± 0.13 ± 0.15
1.9 ± 0.1 ± 0.11 ± 0.13 ± 0.15
2.0 ± 0.1 ± 0.11 ± 0.13 ± 0.15
2.2 ± 0.1 ± 0.12 ± 0.13 ± 0.18
2.3 ± 0.1 ± 0.12 ± 0.13 ± 0.18
2.5 ± 0.1 ± 0.12 ± 0.13 ± 0.18
2.6 ± 0.11 ± 0.13 ± 0.14 ± 0.18
2.8 ± 0.11 ± 0.13 ± 0.14 ± 0.18
2.9 ± 0.11 ± 0.13 ± 0.14 ± 0.18
3.0 ± 0.11 ± 0.13 ± 0.14 ± 0.18
3.1 ± 0.11 ± 0.13 ± 0.15
3.2 ± 0.11 ± 0.13 ± 0.15
3.5 ± 0.11 ± 0.13 ± 0.15
3.6 ± 0.12 ± 0.14 ± 0.16
3.9 ± 0.12 ± 0.14 ± 0.16
4.0 ± 0.12 ± 0.14 ± 0.16
4.4 ± 0.14 ± 0.16 ± 0.17
4.5 ± 0.14 ± 0.16 ± 0.17
5.0 ± 0.14 ± 0.16 ± 0.17
5.6 ± 0.15 ± 0.17 ± 0.18
6.0 ± 0.15 ± 0.17 ± 0.18
For higher thicknesses, consultation of the news stamping process team for availability.