Professional Documents
Culture Documents
ENGINE VDJ79 Workshop ASSEMBLY INSTALLATION - 2
ENGINE VDJ79 Workshop ASSEMBLY INSTALLATION - 2
NOTICE:
To prevent damage to the crankshaft pulley,
apply protective tape to the contact areas of
SST and the crankshaft pulley before
performing this procedure.
Torque:
182 N*m{ 1856 kgf*cm , 134 ft.*lbf }
NOTICE:
Align the crankshaft's knock pin and
flywheel's knock pin hole.
Do not strike or damage the flywheel
installation bolts. Be sure to handle
them carefully.
Make sure there is no oil on the bolts.
NOTICE:
Take care not to insert the clutch disc in the
wrong direction.
http://www.moranbahweather.com/toyota/70series/lc_70e/rm/rm0580e/htmlweb/rm0580e/... 1/29/2013