Professional Documents
Culture Documents
LG pc389p User Manual
LG pc389p User Manual
ENGLISH
You can print easily the photo via
Bluetooth®
yy Minimum distance around the apparatus for yy Do not wet your pocket photo.
sufficient ventilation, no less than 5 cm. Do not drop or shock your pocket photo. Also, do
not put it in a place where sand is likely to get in.
yy The ventilation should not be impeded by covering
the ventilation openings with items, such as yy Do not leave it in a car interior, high temperature
newspapers, table-cloth, curtains etc. place, humid place or coast for a long time.
yy No naked flame sources, such as lighted candles, yy Do not store Pocket photo and film in your closet
should be placed on the apparatus. with insect repellent gas such as naphthalene
because it is harmful to Pocket photo and film.
yy The unit’s internal lithium battery should only be
serviced by an authorised service centre.
yy Do not wet your pocket photo or hold it with wet
hands. It may cause an electric shock.
yy If foreign matter or water enters the pocket photo,
or there is a shock or damage, turn off the pocket
photo immediately.
yy This unit is not waterproof.
> >
Caution
CAUTION when using this product in
environments of low humidity
yy It may cause static electricity in environments
of low humidity.
yy It is recommended to use this product after
touching any metal object which conducts
electricity.
*Reset hole
LED indicator
Flash
Shutter
(Power) button
LG Pocket Photo Printer Simple manual
(Reprint) button
Cover button
10
11
12
, ,Note
y When turning the device on, LED indicator
y
flashes for 3 seconds, then printing is
available.
yy For more information, see “About LED
indicator”.
Press (power) button for 2 seconds to turn
on or off.
13
status
When you disconnect the pocket photo from the Charging Battery
charging cable, you can check the battery charge status This device uses a built-in battery. Before using it,
via the LED indicators . fully charge the battery using a USB cable (Type C) or
If the power turned on, you can check the charging adapter. (Refer to below)
status by pressing 1 (Power) button.
The LED indicators will change depending on the
인쇄 준비batery charging status.
업데이트
인쇄 준비
프로그램
업데이트
읽는 중
프로그램
읽는 중
인쇄 중
인쇄 중 LED color Condition
프린트 대기/
배터리 30%
켜짐
Remaining battery is more than
이상(흰색)/
(흰색)
배터리 30%
5장 이상 출력
이상(흰색)/
30% / On
가능이상 출력
5장
가능
전원을 켤때/
배터리 30%
깜박임
미만 30%
(흰색)
Remaining battery is less than 30%
배터리
미만 / On
전원 꺼짐
프린트 불가
(3회 깜박임)
프린트 불가
(3회 깜박임)
No battery / Blinks quickly and turn
충전 중
off.
배터리 부족
=>확인 후
배터리 부족
삭제
=>확인
삭제
후
14
충전 완료
15
yy The operating time on battery may vary From Play Store (Android market)
depending on the battery status, operational Search for “LG Pocket Photo”.
status and environment conditions.
Using QR code
yy When the battery is discharged, printing is You can enter the Play Store (Android Market) by
available after charging it for more than 10
scanning the QR code on the product box.
minutes. (Charge in full to print in a row.)
16
17
18
19
20
21
be changed due to battery consumption. Preparation : Turn the device on, and start printing with
yy It is recommended to keep default setting of the LED indicator turning on.
the device. 1. Run LG Pocket Photo App on iPhone.
2. Select a photo to print, and touch [ ] (Print) on
Pocket Photo App.
3. Touch [Print the photo] on the print window.
yy To print, set print mode or the number of photo
on the preview screen.
yy If Bluetooth is not connected, “ Paired device
not found” message is appeared. (refer to the
Bluetooth setting for iPhone.)
22
, ,Note
In case of iPhone/iPad/iPod, the last paired
iPhone/iPad/iPod is paired to PocketPhoto
automatically when you turn on PocketPhoto if
the Bluetooth on your iPhone/iPad/iPod is on.
23
24
, ,
Note
If you want to change the text of a photo in the
yy The higher resolution the image has, the higher
quality the printed photo has. (The proper resolution
is more than 2560 x 1920 pixel.)
editing function, the font is applied the same
when you change the font of your smartphone. yy Once the battery is fully charged, you can print 30
(The Pocket Photos app does not support font papers in a row.
changes.) yy The prints are based on ISO 24712 Colour image
standard and the number of photos printed may vary
depending on user enviromental conditions (time,
temperture,humidity or printing method).
*ISO 24712 is the color standard regulated by ISO.
yy If there are more than a LG Pocket Photo device,
check MAC address on the label to choose one you
want to use. (Refer to “Checking Label”.)
25
26
, ,
Note
When pressing the power button during printing,
the power is turned off after the paper is ejected.
27
28
Taking photos
1. Press (power) button for 2 seconds to turn on.
2. Open the lens cover by lowering the lens cover
switch.
, ,Note
If the lens cover is closed, you can’t take a photo.
29
30
, ,Note
y Photos can be reprinted only last shot of
differ.
yy The quality of the photos printed with the
y
camera or last printed image with app. camera and the photos printed with the
You can not use reprint function when the Pocket Photo app may be different.
power is turned off or reset.
yy During printing, the photo paper repeatedly
comes out and in about 5 times through
the ejection port. Please wait and do not
pull out the photo by hand until it is finally
released.
yy The flash has an effective range of between
0.7 m and 1.8 m.
31
32
33
, ,Note
yy Wind the strap on your wrist, do not around
your neck.
yy Use caution not to block paper exit slot with
the strap.
yy It is recommended to use the supplied strap
only.
1. Slide the cover button sideways to open the bottom
cover.
34
Product label.
: LED On
프린트 대기/ : LED Blinks
켜짐
(흰색)
: LED Off
전원을 켤때/
Section
깜박임
LED color Condition Description
2. You can find the product label. (흰색)
전원 꺼짐 To print, turn
off
프린트 대기/ on the device.
켜짐
(흰색)
Power
충전 중
Until ready
전원을 켤때/
Turning on/
깜박임 after turning
(흰색) Blinks
충전 완료 on
전원 꺼짐
충전 중
35
충전 완료
인쇄 중
인쇄 준비
배터리 30%
업데이트
이상(흰색)/
Section
프린트
켜짐
대기/
LED color Condition Description Section
프로그램
5장 이상 출력
읽는
배터리중 30%
LED color Condition Description
(흰색)
프린트 대기/ 가능
이상(흰색)/
켜짐 Waits for 인쇄 중 출력
5장 이상
Remaining
(흰색)
printing. Device
배터리 30%
가능 Charge the
전원을 켤때/ 미만 battery is less
깜박임
프린트 대기/
Waiting/ turns itself 배터리 30% battery/On
(흰색)
켜짐
전원을 켤때/ 미만 than 30%
(흰색)
깜박임
(흰색)
On off, if it is left 배터리 30%
프린트 불가
전원 꺼짐 unused for a 이상(흰색)/
(3회 깜박임)
5장 이상 출력
Charge the
전원을 켤때/
깜박임
전원 꺼짐
while. 가능
프린트 불가
(3회 깜박임)
battery/ Blinks To print, charge
(흰색)
배터리 부족
30% quickly and the device.
Power 배터리
충전 중 Battery is
미만
Normal
=>확인 후 turn off.
전원 꺼짐 Charging 삭제
배터리 부족
충전 중 charging operation
=>확인 후
삭제
프린트 불가
Ready to turn Automatic
충전 완료
(3회 깜박임) off/Blinks Device Power
충전 중
quicky Off is set.
충전 완료 Battery is fully
Full charge
charged. 배터리 부족
=>확인 후 Ready to Transferring
삭제
충전 완료 인쇄 준비
업데이트
printing, data via
프로그램
읽는 중
Cooling mode/ Bluetooth or
Blinks Printing
인쇄 중
배터리 30%
이상(흰색)/
5장 이상 출력
가능
배터리 30%
미만
프린트 불가
(3회 깜박임)
36 배터리 부족
=>확인 후
삭제
37
38
39
40
41
42
43
44