Professional Documents
Culture Documents
Information On Bushings 10-20-30-40/630 From Page 3.1 To 3.2
Information On Bushings 10-20-30-40/630 From Page 3.1 To 3.2
Information On Bushings 10-20-30-40/630 From Page 3.1 To 3.2
Normally supplied according fig. A1 page 3.1, draw lead type, without a/horns, with brass bolt "D" tapped M20x2,5 (Style
A1) for the connection to the copper wire.
Upon request, the bushing can be supplied according to fig T1 page 3.1 with long rigid rod, and/or with arching horns (see
page 3.2) with "V" bracket for bottom a/horn (UNEL execution) or without bracket (DIN style).
COMPONENT LIST
FIG. A1
Pos. Pos.
Description
Din ref. UNEL ref.
Pos. 1 (1) Porcelain
Pos. 2 (2) Brass bolt "D" (usually DIN execution, on request execution "EL").
Pos. 3 (4) Cap "E"
Pos. 5 (7) Ring gasket "J"
Pos. 6 (8) Fiber gasket "O”
Pos. 7 (21) Vent screw
Pos. 8 (22) Nylon or fiber gasket
Pos. 9 (10) Flange gasket "N"
Pos. 11 (8) Brass nut M20 DIN 934
Pos. 12 (20) Brass washer dia 21 DIN 125
Pos. 13 (19) Spring washer dia 21 DIN 127
Pos. 14 (17) Mild steel zinkplated nut M10
Pos. 15 (18) Mild steel zinkplated washer dia. 10,5 mm
Pos. 17 (14) Fixing ring "B" DIN 42531 (in mild steel zinkplated or, upon request, in aluminium)
FIG. T1
Pos. Pos.
Description
Din ref. UNEL ref.