Professional Documents
Culture Documents
ABT - Configuration s3
ABT - Configuration s3
(8V07)
AUDI S3 LIMOUSINE (8V07)
Your products
Description Order no.
ABT POWER 2,0 TFSI 221 kW (300HP), 400 Nm to approx. 257 kW (350 HP), 440 Nm
engine code: DNUE, only for vehicles with automatic transmission Only for vehicles with automatic transmission
In this technology, the ABT Power Software is used in an additional engine control unit, the ABT Engine Control (AEC). Thus, ABT ensures the high standard in
performance increase also in new developments and increasing high-tech in vehicles.
Your advantage: The serial engine control unit remains untouched and the vehicle is completely diagnosable. And when it comes to the quality of AEC, the high
standards of the VW Group apply. V3501020350DNUE/1
ABT - START-STOP-SWITCH-CAP with integrated illuminated ABT Logo The high-quality design with Start-Stop lettering fits any Audi cockpit perfectly. A real highlight is the sophisticated light distribution
within the engraved ABT-logo.
in exchange against the original button
After disassembling the factory switch the Start-Stop cap can be carefully removed. The ABT Start-Stop switch is installed in reverse order of the removal procedure. It
can only be attached to the factory switch in one position. 8V0701130
ABT - INTEGRATED ENTRANCE LIGHTS for Audi vehicles with serial integrated entrance lights
set of 2 LED lights with ABT logo
for front and passenger door set of 2 LED lights with ABT logo
for front and passenger door
Features:
· LED light - super bright white (5W)
· Operating voltage: 12V-24V
· current consumption: aprox. 200 ma / LED light
- Also suitable for vehicles with serial integrated entrance light with “Audi Sport“-logo.
installation:
The serial light will be replaced by the ABT LED. The ABT LEDand housing has the same dimension as the serial light.
For vehicles with no serial integrated entrance light or door ajar warning lights, the necessary power for the ABT entrance light is missing. The installation of the ABT
integrated entrance light will only be possible with a higher effort. Please understand that we are not able to give technical support due to all the different vehicle
configurations. AN0700160-1
Constructed from high-tensile steel with forged ends, suit your driving style and handling preferences.
Product advantages:
• Lowered tilt of the car while driving through turns or at fast directional changes
• Improved handling through reduction of roll tilt
• Reduction of under steering
• Undiminished suspension comfort in case of deflaction on both sides at the same time
• Lowered strain of the wheels at the inside of the turn
• Suitable for standard suspension, ABT-suspension springs and ABT-coilovers
• Maintenance-free, cured-on bearings
• Dual adjustment of torsion-stiffnes at the rear axle (soft and severe)
On your next visit, provide this code on our home page to re-load your configuration.
YOUR ABT CODE ABT-1786-EEEE-6C
Or give your personal configuration code to your next ABT dealer:
Phone: +49 (0) 831 / 57140-0 | Fax: +49 (0) 831 / 72666
eMail: info@abt-sportsline.de | Internet: www.abt-sportsline.de
Amtsgericht Kempten HRB 4448 | VAT ID: DE 128 786 143