Professional Documents
Culture Documents
Angle Corner Clamp Woodworking
Angle Corner Clamp Woodworking
Angle Corner Clamp Woodworking
LY
N
O
EL
Clamp
D
O
M
3D
woodworking
RestoreDoctor
VIEW IN BROWSER
Summary
Angle clamp for woodworking
Hardware:
Settings:
• 0.20mm Standard
+custom settings:
• Wall loops: min. 5
• Outer wall: 25 mm/s
• Infill 30 %
• supports are not necessary
• ABS / PETG
Base Part
Add a pause in Slicer at 36mm height - that you can insert an M10 nut with
17mm wrench size.
Handle
Add a pause in Slicer at 18,2mm height - that you can insert an M10 nut
with 17mm wrench size
Assembling:
Step 1
Turn the threaded rod into the main part. Then put an M10 nut and a
washer on it.
Step 2
Put the clamp part on it and then the second nut, fix the outer nut with
threadedlocker or a self locking nut so that the nut and the rod are flush
(green line).
Step 3
Slide the clamping part over the outer nut and screw the middle nut
together and secure it again with threadlocker. ATTENTION do not clamp
the part it must be able to rotate freely!
Step 4
Put a drop of threadlocker on the rod about 57mm from the edge and
screw the handle on.
Model files
handle.stl
base.stl
clamp.stl
License
Attribution—NoDerivatives