Network Parameters
The UC*server is shipped with a default static IP address of 192.168.1.200
You can access the Web-based configuration utility by entering
http://192.168.1.200 from a browser, and login with the following default
credentials:
Username = admin
Password= emetrOtel ‘0’ is a zero)
IMPORTANT: To access your UCXsystem using the default password,
your computer MUST be on the same local network as the UC* system.
Access from outside the network using the default credentials is
RESTRICTED.
The recommended practice is to change your “admin” account password,
youwill be prompted by the system to change your default password the
very first time you loginDHCP Server
Your UC* system can also
function as a DHCP server
To enable this function, go to
the System -> Network -> DHCP | "=
Server page aPublic IP Address — SIP
* Toset the SIP public|P address, go to PBX -> PBX Configuration -> SIP
Settings page, under the NAT Settings section
Set NATto Yes
— = IP Configuration to Static IP,
a Enter the publicaddressin the
External IP field
Local Networks parametersis
to identify all the local
s that will not use