Professional Documents
Culture Documents
CISCO3BLENDEDFINALS
CISCO3BLENDEDFINALS
CISCO3BLENDEDFINALS
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Using CLI configuration what command causes the router to stop sending hello
packets through an interface?
Select one:
a. no bandwidth
b. no auto-summary
c. passive-interface
d. nedistribute static
Question 2
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 3
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 4
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 5
Correct
Mark 1.00 out of 1.00
Flag question
Question text
In Cisco IOS image naming conventions what command would a network
engineer use to find the unique device identifier of a Cisco router?
Select one:
a. show version
b. show license udi
c. show running-configuration
d. license install stored-location-url
Question 6
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 7
Correct
Mark 1.00 out of 1.00
Flag question
Question text
During our test lab, a router has learned three possible routes that could be
used to reach a destination network.
One route is from EIGRP and has a composite metric of 20514560. Another route
is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4.
Which route or routes will the router install in the routing table?
Select one:
a. the OSPF and RIPv2 routes
b. the EIGRP route
c. the RIPv2 route
d. the OSPF route
Question 8
Correct
Mark 1.00 out of 1.00
Flag question
Question text
During the release of Cisco IOS image ver. 15.0, which license technology
package offers the features found in IPVoice IOS image on ISR 1900, 2900, and
3900; for example, TDM/PSTN Gateway, Video Gateway [H320/324], Voice
Conferencing, Codec Transcoding, RSVP Agent (voice), FAX T.37/38, CAC/QOS,
and Hoot-n-Holler?
Select one:
a. Unified Communications(UC)
b. Security
c. Data
d. IPBase
Question 9
Correct
Mark 1.00 out of 1.00
Flag question
Question text
A new network specialist has been asked to verify the metrics that are used by
EIGRP on a Cisco device. Which two EIGRP metrics are measured by using static
values on a Cisco device?
Select one:
a. Load & hello
b. MTU & bandwidth
c. Bandwidth & delay
d. Delay & load
Question 10
Incorrect
Mark 0.00 out of 1.00
Flag question
Question text
Question 11
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 12
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 13
Correct
Mark 1.00 out of 1.00
Flag question
Question text
In managing IOS system image files how long is the evaluation license period for
Cisco IOS Release 15.0 software packages?
Select one:
a. 45 days
b. 15 days
c. 60 days
d. 30 days
Question 14
Incorrect
Mark 0.00 out of 1.00
Flag question
Question text
As described in the features and operation of EIGRP where are EIGRP successor
routes stored?
Select one:
a. only in the neighbor table
b. in the routing table and the topology table
c. only in the routing table
d. in the routing table and the neighbor table
Question 15
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 16
Correct
Mark 1.00 out of 1.00
Flag question
Question text
In understanding IOS system image files which IOS 12.4 software package
integrates full features, including voice, security, and VPN capabilities, for all
routing protocols?
Select one:
a. Advanced Enterprise Services
b. Service Provider Services
c. Advanced Security
d. Advanced IP Services
Question 17
Incorrect
Mark 0.00 out of 1.00
Flag question
Question text
Refer to the show ip route test result above. Which statement is supported by
the output
Select one:
a. Summarization of routes has been manually configured.
b. A static default route has been manually configured on this router.
c. The route to 192.168.1.1 represents the configuration of a loopback interface.
d. A default route is being learned through an external process.
Question 18
Correct
Mark 1.00 out of 1.00
Flag question
Question text
In understanding of chapter 7 EIGRP uses the dual algorithm for finding shortest
path?
Select one:
True
False
Question 19
Incorrect
Mark 0.00 out of 1.00
Flag question
Question text
Question 20
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Refer to result output above and observe carefully. Remote users are
experiencing connectivity problems when attempting to reach hosts in the
172.21.100.0/24 network using the result output above. What is the most likely
cause of the connectivity problem?
Select one:
a. The GigabitEthernet interfaces are not limiting the flow of EIGRP message
information and are being flooded with EIGRP traffic.
b. The passive-interface command is preventing neighbor relationships on
interface GigabitEthernet 0/0.
c. The hello timer has been modified on interface GigabitEthernet 0/1 of R3 and
not on the neighbor, causing a neighbor adjacency not to form.
d. The GigabitEthernet 0/1 interface is not participating in the EIGRP process.
Question 21
Incorrect
Mark 0.00 out of 1.00
Flag question
Question text
In fine-tuning of EIGRP networks how can I use only one path when a router has
two equal cost paths?
Select one:
a. Configure the bandwidth value on the interfaces to default, and increase the
delay on the backup interface so that the router does not see two equal cost
paths.
b. Configure the bandwidth value in the global configuraion to default, and
increase the delay on all interfaces so that the router does not see two equal
cost paths.
c. Configure the bandwidth value at the loopback interface to default, and
increase the delay on the backup interface so that the router does not see two
equal cost paths.
d. Configure the bandwidth value on the interfaces to default, and increase the
bandwidth on the backup interface so that the router does not see two equal
cost paths.
Question 22
Correct
Mark 1.00 out of 1.00
Flag question
Question text
In understanding EIGRP which of the EIGRP route would have the preferred
administrative distance?
Select one:
a. a summary route
b. an external route that is redistributed from OSPF
c. an internal route
d. an external route that is redistributed from RIP
Question 23
Correct
Mark 1.00 out of 1.00
Flag question
Question text
In our test lab, 2 routers R1 and R2, have established an EIGRP neighbor
relationship, but there is still a connectivity problem. Which issue could be
causing this problem?
Select one:
a. Cabling problem
b. An access list that is blocking the advertisements from other networks was
configured in each or both routers
c. Ip conflict
d. Wrong configuration of ip network
Question 24
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Which two EIGRP packet types are sent with reliable delivery?
Select one:
a. Ack & hello
b. Reply & hello
c. Update & Ack
d. Query & Ack
Question 25
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 26
Correct
Mark 1.00 out of 1.00
Flag question
Question text
The client of a networking company requires VPN connectivity for workers who
must travel frequently. To support the VPN server, the customer router must be
upgraded to a new Cisco IOS software version with the Advanced IP Services
feature set. What should the field engineer do before copying the new IOS to the
router?
Select one:
a. Set the router to load the new IOS image file directly from the TFTP server on
the next reboot.
b. Issue the show running-configuration command to determine the features of
the currently installed IOS image file.
c. Issue the show version and the show flash commands to ensure that the
router has enough memory and file space to support the new IOS image.
d. Delete the currently installed IOS by using the erase flash: command, and
reload the router
Question 27
Incorrect
Mark 0.00 out of 1.00
Flag question
Question text
As discussed in EIGRP module which table is used by EIGRP to store the best
routes?
Select one:
a. the static table
b. the neighbor table
c. the routing table
d. the topology table
Question 28
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 29
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Refer to the output above, which statement accurately reflects the configuration
of routing on the main office router?
Select one:
a. The IP address assigned to the GigabitEthernet0/0 interface is 172.16.2.0
255.255.255.0.
b. A static default route was learned via EIGRP routing updates.
c. The static default route should be redistributed using the default-information
originate command.
d. A static default route was configured on this router.
Question 30
Correct
Mark 1.00 out of 1.00
Flag question
Question text
In EIGRP routing principles, If there are two EIGRP processes that run and two
equal paths are learned, one by each EIGRP process, how many routes get
installed?
Select one:
a. 4 routes
b. 2 routes
c. 0 route
d. 1 route
Question 31
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 32
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Flag question
Question text
Question 34
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 35
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 36
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 37
Correct
Mark 1.00 out of 1.00
Flag question
Question text
In installing new Cisco IOS image license which condition should the network
engineer verify before attempting to upgrade a cisco IOS image using A tftp
server?
Select one:
a. Verify the name of the TFTP server using the show hosts command.
b. Verify that the TFTP server is running using the tftpdnld command and verify
if there is enough flash memory for the new Cisco image using the show flash
command.
c. Verify that the checksum for the image is valid using the show version
command.
d. Verify connectivity between the router and TFTP server using the ping
command and verify if there is enough flash memory for the new Cisco image
using the show flash command.
Question 38
Correct
Mark 1.00 out of 1.00
Flag question
Question text
In reference to summarization rules which EIGRP route would have the preferred
administrative distance?
Select one:
a. a summary route
b. a passive route
c. a redistribute static
d. a static route
Question 39
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 40
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 41
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 42
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 43
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Referring to the verification result above R3 has two possible paths to the
172.16.99.0 network. What is the reported distance of the feasible successor
route?
Select one:
a. 2340608
b. 10512128
c. 2816
d. 2169856
Question 44
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 45
Correct
Mark 1.00 out of 1.00
Flag question
Question text
The PRD company network engineer is upgrading the Cisco IOS image on a
Cisco ISR 4000 series. What command could the engineer use to verify the total
amount of flash memory as well as how much flash memory is currently
available?
Select one:
a. show version
b. show startup-config
c. show interfaces
d. show flash0:
Question 46
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Question 47
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Coming from our office network as shown by the diagram above. All networks
are active in the same EIGRP routing domain. When the auto-summary
command is issued on R3, which two summary networks will be advertised to
the neighbors?
Select one:
a. 172.16.3.0/24 & 192.168.10.0/30
b. 192.168.10.0/24 & 172.16.0.0/16
c. 192.168.10.0/30 & 172.16.0.0/16
d. 192.168.1.0/30 & 172.16.3.0/24
Question 48
Correct
Mark 1.00 out of 1.00
Flag question
Question text
As explain in licensing process for Cisco IOS software which serves as a receipt
and is used to obtain a license. It is an 11- digit alphanumeric key created by
Cisco manufacturing. It defines the Feature Set associated with it.
Select one:
a. Cisco End User License Agreement (EULA)
b. Product Activation Key (PAK)
c. Cisco License Manager (CLM)
d. IOS Image
Question 49
Correct
Mark 1.00 out of 1.00
Flag question
Question text
In an EIGRP topology table, a route that is in a/an inactive state will cause the
Diffusing Update Algorithm to send EIGRP queries that ask other routers for a
path to this network.
Select one:
True
False
Question 50
Correct
Mark 1.00 out of 1.00
Flag question
Question text
Refer to the above test results. A certified network engineer has configured
eigrp authentication between routers R1 and R2. After their routing tables are
received, it is noted that neither router is receiving eigrp updates. What is a
possible cause for this failure?
Select one:
a. The same autonomous system numbers must be used in the interface
configurations of each router.
b. The key string should be used in interface mode instead of the key chain.
c. The same key chain name must be used on each router.
d. The authentication configuration is correct, issue the show ip eigrp neighbors
command to troubleshoot the issue.