Professional Documents
Culture Documents
EGR 1174 ENGINEERING STATICS Tutorial 2
EGR 1174 ENGINEERING STATICS Tutorial 2
Tutorial 2
Question 1
If the moment produced by the 4-kN force about point A is 10kN.m clockwise, determine the
angle Ɵ, where 0° ≤Ɵ ≤ 90°.
Question 2
The member is subjected to a force of F = 6kN . If Ɵ = 45˚,
Question 4
The wheelbarrow and its contents have a mass of 50 kg and a center of mass at G. If the
resultant moment produced by force F and the weight about point A is to be zero, determine
the required magnitude of force F.
Question 5
Determine the moment produced by F1 about point O. Express the result as a Cartesian
vector.
Question 6
Determine the moment produced by force FC about point O. Express the result as a Cartesian
vector.
Question 6
The pipe assembly is subjected to the 80-N force. Determine the moment of this force about
point A.
Question 7
Figure below shows Force F acts at the end of the angle bracket. Determine the moment of
the force about point O.