MAHARASHTRA Boren CONTROL BOARD
Phone : 4010437/4020781 Kalpataru Point, 3rd_& 4th floor, Sion- Matunga
14037 12414035273 ‘Scheme Road No. 8, Opp. Cine Planet Cinema, Near
‘iaoaeaseieay Sion Circle, Sion (E),
Fax: 24044532/4024068 14023516
Email: enqury@mpeb govin < Mumbai - 400022
Visit At: httor/mpeb.sov.in 74
Consent No: BO/JD (APC)/EIC No. NK-18452-14 IRICC- (S39) Date- 02|06]201S
To,
Mis. KSPG Automotive India Pvt.Ltd.
Plot no.A-1, Additional Supa Parner Industrial Part,
Tal: Pamer, Dist: Ahmadnager. dy
‘Subject: Consent to Establish unit under Red Category. ey
Ref: 4. Minutes of CC meeting held on 22/05/2015. NS
Your application: CE1502000244 Dated: 02.01.2015.
For: Consent to Establish for R 36 Industry or process involvi ZT surface treatment or
pro.
under Section 25 of the Water (Prevention & Control of Potfition) Act, 1974 & under Section 21 of
the Air (Prevention & Control of Pollution) Act, 1981 norization under Rule 5 of the
Hazardous Wastes (M, H & T M) Rules 2008 is consi@fed and the consent is hereby granted
subject to the following terms and conditions and a d'in the schedule |, Ii, Ill & IV annexed
to this order:
of the unit or 5 years pé
whichever is earlier.
The total capital investment of the Qin Rs.70.07 Crs
(As per Undert A, fpmitted by industry)
2. The Consent is valid for th ture of
Sintered Sitips
Alludiniom Tin Strips
“BilBtskGasting
PBuBbEs
5 ex. Wiping of Bearing and bush
jon$ under Water (P&CP), 1974 Act for di
apes ue See ea ee ARES
1 Trade effiuent 102.5 ‘As per Schedule -1_ | “On Land for Gardening. |
([2.] Domestic effluent 28.0 | As per Schedule 1 | _On Land for Gardening
Tis REPS Automotive dla PELE Ay rage ToT
oo4. Conditions under Air (P& CP) Act, 1981 for air emissions:
zs nee
ES EE iit
il Fumed coboard
2 Bush Platting shop
3 Manual Platting
4 DG.
5 Alloy Platting
6 Bush annealing Ind Furnace
7 Fume Coboard
[8 Linishing M/C Sinter plant
9 AIT Plant Brushing S
10 DG.
1 DG_ AN
2 ‘AMT Plant off line brushing a
43 DG. QD ule “11
14 Induction Furnace (Billet fj}
Casting)
75 Welding MIC Alloy Platting KS
16 Alloy Platting
7 Alloy Platting ow
18 ANT Plant linishing m/c ww
19 ‘AIT Plant pit Oven |__ext
20 AIT Plant A-17 x A-123
Linishing mic
21 Alkaline degreasingy NI
22 Platting SL-90 Gen s&,\Nu
23 Billet Casing OO
24 Powder Plaritg
25 Powder Rigat S
26 Billetaigting”
27 Grind Gol binishing
Sai aes
1 NS] Scrap Altin 5.00 MT/M _ By sale
Deform Bearing
(MS Base)
‘Scarp Altin 2 MTN = By sale
coated strips &
Pices (MS Base)
3 Scrap AT ABB 30 wT = By sale
Bur
4 ‘Sorap AT 30 iti = By sale
punced strips
(MS Base) _
5 ‘Scrap AT tukac 02 MT = By sale
pices & slitting
6 Scrap Electrical 02 Mitt = By sale
Wis. KSPG Automotive india PvE Ltd, Page ZT- Cabies
7 Scrapped tooling O2 wari = By sale
8 Scrap MS 13.0 MIM — By sale
turning 7
3 ‘Scrap MS 20 Tati = By sale
turning Hea
10 Scrap steel! 75.0 wiTiM = By sale
Strips (Bare
steel MS Base)
a Light Stee! Scrap |___2.0 iM = By sale
12 Garbage 70.0 MaT/M, By sale.
13 Heavy Steel(MS [15.0 MaT/M = By sale
with SS lining
)/Broken
Machinery >.
14 Wooden Scrap 50 warn = ey See
15 Scrap linishing 4.0 MM = Qe
burr(Stee!) 4
16 ‘Scrap broken 075 wii SP By sale
Crucible +
7 Plastic Serap os MM es By sale
18 ‘Scrap linishing 0.25 MT we By sale
Belt mK
79 ‘Scrap Tin Dross. 075 MT a By sale
20. Foundary Mitt 2.0 MyM A — By sale
6. Conditions under Hazardous Waste (MH OE 2008 for treatment and disposal
of hazardous waste
SCE
11.5 Wastes from
treatment of salt arco see.
slag’s and blag] eco Recor
drossess 4." P
2 teagan MT Ma S Sale to MPCB
sy eB 0.25 Authorised
Reprocessor
3 wim] —= | Sale to MPCB
be eS IResidue !
hédhtaining oil oe ——
4 Ny S.tUsed ol Mim | —- | Sale to MPCB
600.00 Authorised
Reprocessor
5 33.3 Discarded Mra] — | Sale to MPCB
containers 25.00 Authorised
Reprocessor
6 33.3 Discarded Mim] — | Sale to MPCB
containers 20.00 Authorised
Reprocessor
7 33.abiscarded MTjiw|~— | Sale to MPCB
containers 60.00 Authorised
Reprocessor
3 33.Sbiscarded 0.12 [MT mM | — [Sale to MPCB
Wis, KSPG Aitomotive India PELE f - Page 3 oF 10[ containers ‘Authorised
Reprocessor_|
3 34.3Chemical sludge wtm|— | CHWTSDF
from waste water 12.00
treatment
10 15.2 Discarded 075 |MTml - | CHWTSDF
asbestos
a 72.4 Sludge fombath | 0.35. |MT/M| — | CHWTSDF
containing organic
solvents
2 11.5 Wastes from 050 [MTm| — | CHWTSDF
treatment of salt slag
and black drossess
3 5.2 Wastes /Residue 050 |MTm| — CRITE
containing oil
14 B3 Copper Components | 72.60 | MT /M CAWRSDF
15 B3 Copper Components 8.0 MT KCNWISDE
16 B2 Cobalt Components 0.4 MT Mt. HWTSDF
7 B4 Lead & Lead 051 MT iM rw KCHWTSDF
| Components e
78 ‘AG Mercury Compounds 0.10 Mi i | %NS*[CHWTSDF
this consent and the same
7. The Board reserves the right to review, amend, susper oP
shall be binding on the industry. =~
9. This consent should not be construed as exemption, ining necessary
NOCipermission from any other Government RY
~~ Maharashtra we Board
ae
(P.KMirashe)
Member Secretary
Received Consent fe
CRG Ses SSS aoe
1 a9 ON 127309 30.12.2014 HDFC Bank
2 ew 504851 [31.12.2014 [Axis Bank.
N
Copy to:
1. Regional Officer MPC Board, Nashik
2. Sub-Regional Officer, IM.P.C. Board Ahmadnagar, They are directed to ensure the
compliance of the consent conditions,
3. Chief Accounts Officer, MPCB, Mumbai,
4, CCICAC desk- for record & website updation purposes.
Tats, KSPG Automotive india PviLtd 7 Page 4010‘Schedule!
‘Terms & conditions for compliance of Water Pollution Control:
4) A] As per your application, you have provided Effluent Treatment Plant (ETP) with the
design capacity of 102 CMD.
B] The Applicant shall operate the effluent treatment plant (ETP) to treat the trade effluent so
as to achieve the following standards prescribed by the Board or under EP Act, 1986 and
Rules made there under from time to time, whichever is stringent.
.
SiNo| Parameters Standards prescribed by Board (If my.
Timiting Concentration in mgM, exeqpvoeH
oF pH 5550 CNS
02 Oil&Grease | 10, SS
03 8.0.0. ZN
04 €.0.0. a)
05 TDS. eNO
06 Chlorides PIN
o7 Suiphates YY 1000
08 | Suspended Solid RY 0
08 Phosphate way 50
0 Total Metal SO 50
. Wo
C] The treated effluent shall be ¥ own land for gardeningfirrigation.
2) A] As per your consent applitalioty you have provided the Sewage Treatment Plant for
Sewage effluent oi gee 8 CMD.
B] The Applicant sh@l| bgtrate the sewage treatment system to treat the sewage so as to
achieve the foffdhving standards/ prescribed under EP Act, 1986 and Rules made there
under fromytigte (Sime, whichever is stringent.
(1) Sagspétued Solids. Not to exceed 100 mgfl
We days 2706. Not to exceed 400 magi
G]_ ThRreated sewage shall be disposed on tand for gardening
3) The Board reserves its rights to review plans, specifications or other data relating to plant setup
for the treatment of water, works for the purification thereof & the system for the disposal of
‘sewage or trade effluent or in connection with the grant of any consent conditions. The Applicant
shall obtain prior consent of the Board to take steps to establish the unit or establish any
treatment and disposal system or and extension or addition thereto.
4) The industry shall ensure replacement of pollution control system or its parts after expiry of its
‘expected life as defined by manufacturer so as to ensure the compliance of standards and safety
of the operation thereof.
Tis. KSPG Automotive india Pvt.Ltd, JE Page Sof 10- |* 5) The Applicant shall comply with the provisions of the Water (Prevention & Control of Pollution)
Goss Act, 1977 and as amended, by installing water meters, filing water cess returns in Form-t
and other provisions as contained in the said act
7, [Industrial Cooling, spraying in mine pi
(2. ‘Domestic purpose ~ 36.0
3, | Processing whereby water gets polluted & pollutants 95.0
are easily biodegradable
| Processing whereby water gets polluted & pollutants =
are not easily biodegradable and are toxic
N.
6) The Applicant shall provide Specific Water Pollution control system as per Mio of
EP Act, 1986 and rule made there under from time to time/ Emvigered learance /
CREP guidelines. WD
Wis. KSPG Automotive India Pvt.
GL’ Page 6 oF 10‘Terms & con:
Scheduk
ions for compliance of Air Poll
4. As per your application, you have proposed to install the Air pollution control (APC)system
‘and also proposed to erect following stack (s) and to observe the following fuel pattern-
2 | Bush | Stack | 13.50
Platting
shop
3 | Manual | Stack [5.25 =
Platting
4_[_ DG. Stack | 75.50 =
3 | Alloy | Stack | 10.50 =
Platting
6 | Bush [Stack | 9.50 =
annealing
Ind
Furnace :
7 | Fume _ | Stack 6 =
Coboard a
8 |[Linishing | Stack ASO) —