Professional Documents
Culture Documents
Anatytican Technical Note 01 - 11
Anatytican Technical Note 01 - 11
11 B iol y ze r 1 00
01 /11 R e v. 1
Technical Note A rno ld 1 of 2
The LCD is connected via the keypad board to the mainboard and according to the different
cables there are also different keypad boards in use.
It is possible to connect the Sharp LCD and the Hitachi LCD to the same keypad board type,
but the Qunchuang LCD uses another type.
3. Main board
Sharp LCD:
a) Exchange to another Sharp LCD, if available
b) Exchange of the Sharp LCD by a Qunchuang LCD including the keypad board
and reinstall of the corresponding Win CE version for Qunchuang LCD.
Hitachi LCD:
a) Exchange to another Hitachi LCD, if available
b) Exchange of the Hitachi LCD by a Qunchuang LCD including the keypad board
and reinstall of the corresponding Win CE version for Qunchuang LCD.
Qunchuang LCD:
a) Exchange to another Qunchuang LCD.
01 /11 R e v. 1
Technical Note A rno ld 2 of 2
Step1:
Check the status of two LEDs on the main board. (One is on and the other one is flashing)
Step2a:
If you find that two LEDs are both on all the time, it means that WinCE system got lost.
Then it is necessary to reinstall the Win CE version corresponding to the installed LCD type.
Step 2b:
If you find that the status of the two LEDs is OK (one is on and the other one is flashing), but the
lamp is off, please check that the lamp is OK and the connection between the lamp and the front
board is OK.
In case the lamp and the connection are ok, the Win CE system is ok and the software got lost.
Step 3:
Upgrade the software.