Professional Documents
Culture Documents
MCT-111 Egd 2022 LM6 18
MCT-111 Egd 2022 LM6 18
Equipment Required:
A PC/Laptop with AutoCAD 2021 installed on it.
CLO Covered:
Tasks:
Attempt the following tasks and insert only the required answer in the given field. Insert figures wherever
demanded.
Question # 1: Draw Front, Top and Side orthographic projection of the following figure using 1 st angle
projection method on AutoCAD and insert the screen-shot in the field below. You should place
dimensions and labelling text as well.
Prepared by: Qurat ul Ain Masud, Lecturer (MCE Dept. UET Lahore)
Lab Manual for Engineering Graphics & Drawing – Mechatronics & Control Engineering, UET, Lahore
After completing the drawing, save the file named as Lab_manual_6_task1 in a folder
‘2022_MC_XX_AutoCAD’ with .dwg extension/format.
Question # 2: Draw Front, Top and Side orthographic projection of the following figure using 1 st angle
projection method on AutoCAD and insert the screen-shot in the field below. You should place
dimensions and labelling text as well.
Prepared by: Qurat ul Ain Masud, Lecturer (MCE Dept. UET Lahore)
Lab Manual for Engineering Graphics & Drawing – Mechatronics & Control Engineering, UET, Lahore
Answer # 2:
After completing the drawing, save the file named as Lab_manual_6_task2 in a folder
‘2022_MC_XX_AutoCAD’ with .dwg extension/format.
Question # 3: Draw the following drawing on AutoCAD and insert the screen-shot of the dimensioned
drawing in the field below. Units are in inches
Prepared by: Qurat ul Ain Masud, Lecturer (MCE Dept. UET Lahore)
Lab Manual for Engineering Graphics & Drawing – Mechatronics & Control Engineering, UET, Lahore
After completing the drawing, save the file named as Lab_manual_6_task3 in a folder
‘2022_MC_XX_AutoCAD’ with .dwg extension/format.
Prepared by: Qurat ul Ain Masud, Lecturer (MCE Dept. UET Lahore)
Lab Manual for Engineering Graphics & Drawing – Mechatronics & Control Engineering, UET, Lahore
Answer # 3:
Question # 4: Reproduce the following drawing on AutoCAD. You should place dimensions and
labelling text as well.
Prepared by: Qurat ul Ain Masud, Lecturer (MCE Dept. UET Lahore)
Lab Manual for Engineering Graphics & Drawing – Mechatronics & Control Engineering, UET, Lahore
Answer # 4:
After completing the drawing, save the file named as Lab_manual_6_task4 in a folder
‘2022_MC_XX_AutoCAD’ with .dwg extension/format.
Students are advised to fill the manual and submit it before the upcoming lab. At the end of the semester, a lab
report will be demanded which should contain all lab manuals.
Kindly rename the file as ‘MCT-111_EGD_2022_LM6_XX’, where XX is your roll number. After filling the file,
turn it on Google Classroom.
Prepared by: Qurat ul Ain Masud, Lecturer (MCE Dept. UET Lahore)