TECHNICAL SPECIFICATIONS

A. Lamp Crushing Machine

- Drum Top Type :
1. Compatible to 55-Gallon Shipping Steel Drum
2. LCD Display
3. Multi Alarm Indicators
- Multi-Lamp Type Compatibility :
Linear Fluorescent Tubes with Entry Tubes for :
1. T12 40W and 20W – Aluminum with Rubber Plug
2. T8 36W and 18W – Aluminum with Rubber Plug
3. T5 18W and 10W – Aluminum with Rubber Plug
4. U-Fluorescent Lamps Entry Chute
Compact Fluorescent Lamps (CFL) :
1. CFL Entry Chute – Pre-painted G.I. Plain Sheet
U-Fluorescent Lamps:
2. U-Fluorescent Lamp Entry Chute – Pre-painted G.I. Plain Sheet
- Safety Features :
1. Drum Full Indicator with Pilot Light
2. Drum Open or Lid Off Indicator with Pilot Light
3. Purge Delay System with Pilot Light
4. Emergency Stop Button Palm Type
5. Push Button Start Operation Type
- Four (3) Stage Filtering System :
1. Stage 1 – Cartridge Type (not greater than 1 microns)
2. Stage 2 – HEPA Type (not greater than 0.3 microns)
3. Stage 3 – Activated Carbon with Sulfur
4. Stage 4 – HEPA Type (not greater than 0.3 microns)
- Crushing System :
1. Chain Type – 3-Piece and 6 to 10 Link Steel Material
- Vacuum System :
1. Vacuum Pressure - 35-45 cfm
- Motor :
1. Power – not greater than 1/4HP
2. Voltage – 120V/230-240V, 1-Phase
- Electrical Parameters :
1. Power – not greater than 1100W
2. Voltage – 230-240V
3. Phase – Single
4. Frequency – 50Hz/60Hz
 - Regulatory Standard Compliance :
1. US Environmental Protection Agency or Approved Equivalent
2. OSHA or Approved Equivalent
3. OECD (Organization for Economic Co-Operation and Development)
Brand/Manufacturer Country of Origin
4. Emission Test Report from Reputable Regulatory Safety Standard Organizations

B. Drum
- Specifications
1. 55 Gallon Capacity
2. Steel Made
3. Shipping Drum Type
4. Pre-painted with Epoxy and Black Enamel Paint Finish
5. With Drum Lid Steel Cover
6. With Bolted Type Steel Ring Lock
7. Compatible with the Lamp Crushing Machine
8. With DENR/EMB Prescribed Hazardous Wastes Sticker Marking