Professional Documents
Culture Documents
Fos Roc Waterproofing Torch Applied Brochure
Fos Roc Waterproofing Torch Applied Brochure
PROOFING
SOLUTIONS
TORCH APPLIED
PROOFEX® TORCHSEAL
Waterproofing
About Fosroc and Parchem
Fosroc is a world leader in construction Fosroc has an extensive network of offices
solutions. Since the company’s beginnings and manufacturing locations across Europe,
over 80 years ago, Fosroc has developed the Middle East, India and Asia, and is further
into an international leader in delivering represented in other regions across the world by
construction solutions for virtually any distributor and licensee partners.
building or infrastructure project. New or
old construction above or below ground, Parchem Construction Supplies, part of
we combine high quality products, expert DuluxGroup, is the licensed manufacturer and
technical support, customer service and distributor of Fosroc, Vector ®, Vandex®, and
innovation to give you the best solution for EdenCrete® products in Australia, and Concrete
your project. Plus™ is the licensed distributor in New Zealand.
2
Fosroc Waterproofing Solutions
Fosroc offers a comprehensive range of world class waterproofing
solutions and systems from below ground to high above it, including
sheet, liquid and torch applied membranes.
3
Product Selector
Torch Applied Waterproofing
Proofex Torchseal is a range of APP (atactic polypropylene) based torch applied waterproofing membranes, ideal for the
Australian and New Zealand climate. APP membranes provide greater UV resistance and heat resistance in harsh climates
compared to SBS membranes.
Mineral finish top layer to provide long term UV For planted areas and
resistance for situations where the top layer will green roofs that will
be left visible. be covered with soil,
stones or gravel, to
Torchseal A625 Torchseal A825 prevent penetration of
plant roots.
• 4.5mm thick mineral • 4.5kg/m2 thick
finish waterproofing mineral finish
membrane waterproofing Torchseal A700
membrane • Plant root repellent
• Cold bending to
-10ºC • Cold bending to membrane
-15ºC • Cold bending to
-10ºC
A range of base layers that can be used in multi-layer systems, or covered with stones, gravel, Membrane specifically
paving or another structure, depending on the project requirements. designed for bridge
decks that will receive
Torchseal A500 Torchseal A600 Torchseal A800 hot rolled asphalt.
• 3.5mm thick waterproofing • 3mm thick waterproofing • 4mm thick waterproofing Torchseal A900
membrane membrane membrane
• 5mm thick
• Cold bending to -5ºC • Cold bending to -10ºC • Cold bending to -15ºC waterproofing
membrane
• Cold bending to
-15ºC
SPECIALISED FIRST LAYER
These specialised membranes can be used as the first layer to provide heat resistance or
vapour ventilation depending on the project requirements.
4
Exposed Proofex Torchseal A500 / A600 / A800 Torchseal A400
A625 / A825 (optional 2 x A600 / A800) (optional) Primer 24 Substrate
Roofs
System Recommendations
Structural Proofex
Exposed
Below&
Roofs
Concrete Water Torchseal A600
Proofex Torchseal
Primer 24
Proofex
Blinding Concrete
Ground
Exposed
Podiums
A500 / A600 / A800 Torchseal A400
Planted Paving Proofex (optional 2 x A600 / A800)
Proofex(optional) Primer 24 Substrate
and Water
Roofs 2
Planted Plants Proofex
Torchseal Proofex Proofex
Torchseal A400
Areas Soil Plants
and Turf Torchseal
A700 Proofex
Torchseal A600 Torchseal
(optional) A400 Primer 24 Substrate
Containment
Unexposed
Areas Soil Primer 24 Substrate
and Turf A700 Torchseal A600 (optional)
top layer
Proofex
Exposed
Exposed Proofex Torchseal Proofex Torchseal Torchseal A400
top layer A625 / A825 A500 / A600 / A800 (optional) Primer 24 Substrate
Roofs
Ground
and Water
and Water
Containment
Containment
Structural Proofex
Below Concrete Water Torchseal A600 Primer 24 Blinding Concrete
Bridge
Ground
Bridge Proofex Torchseal
Decks
Bridge
and Water Proofex
A900 Torchseal
Decks Asphalt Primer 24 Substrate
Decks Asphalt A900 Primer 24 Substrate
Containment
Proofex
Exposed
Planted Proofex Torchseal
Proofex Proofex Torchseal Torchseal
Proofex A400
Tunnels
Roofs Plants/ A825TorchsealProtection
A625 A500 / A600 / A800 2 (optional)
Proofex x Proofex Torchseal
Torchseal A400 Primer 24 Substrate
Areas
Tunnel
Tunnels Soil Finishes
and Turf A700 Protection
Torchseal A600 2
Layer x Proofex
A600 / A800Torchseal Primer
(optional) Primer24
24 Substrate
Substrate
and Buried Finishes Layer A600 / A800 Primer 24 Substrate
Roofs
and Buried
Roofs
Roofs
&and
Underground
Water
Carparks
Containment
*not potable water
approved
Note: use of a slip sheet and Proofex Sheetdrain 81 are recommended before backfilling.
Proofex
Exposed Proofex Torchseal Proofex Torchseal Torchseal A400
5Roofs A625 / A825 A500 / A600 / A800 (optional) Primer 24 Substrate
Torch Applied Waterproofing Product Guide
Proofex® Torchseal® A300 Proofex® Torchseal® A350 Proofex® Torchseal® A400 Proofex® Torchseal® A500 Proofex® Torchseal® A600
Description Polyester fabric backed base sheet for heat Self-adhesive base sheet for heat sensitive Perforated reinforced base sheet for 3.5mm thick, reinforced elastoplastomeric 3mm thick, reinforced elastoplastomeric
sensitive substrates in multi-layer torch-on substrates in multilayered torch on membrane connecting layers in waterproofing polymer – bitumen waterproofing membrane. polymer – bitumen waterproofing membrane.
membrane systems. systems. semi-adhesive systems.
Type Specialised first layer Specialised first layer Specialised first layer Base layer Base layer
Typical uses For heat senstitive substrates such as timber, For use over heat sensitive substrates such as For spot bonding torch applied bituminous Foundations, basements, tunnels, terraces Foundations, basements and tunnels,
thermal insulation or old failed membranes. thermal insulation, timber, metals, plastics, rigid membranes over substrates with relatively and roofs as a single layer, or, as part of a particularly as the base layer of multi-layer
PVC and old failed liquid applied membranes. high humidity. multi-layer system. systems.
General advantages Various methods of attachment Self adhesive - direct lay without using nails or The finish layer is more resistant to the wind Handles ponding and permanently wet Handles ponding and permanently wet
- Mechanically fastened glue. and temperature variations than with other conditions. conditions.
- Fully or part adhered with adhesive spot bonded methods.
- Hot asphalt roll & pour method.
Reinforcement type Non-woven polyester Non-woven polyester with adhesive Fibreglass Non-woven polyester Non-woven polyester with a continuous
filament placed in the thickness of the
membrane
Impermeability to water (EN1928 B method) ≥ 60 kPa >60 kPa N/A ≥ 60 kPa ≥ 60 kPa
Size 1m wide x 20m roll 1m wide x 10m roll 1m wide x 30m roll 1m wide x 10m roll 1m wide x 10m roll
Coverage (approx.)* 19m² / 20m roll 9m² / 10m roll 28m² / 30m roll 9m² / 10m roll 9m² / 10m roll
Primer (depends on surface porosity) No primer required Fosroc Primer 24 Fosroc Primer 24 Fosroc Primer 24 Fosroc Primer 24
6 7
Torch Applied Waterproofing Product Guide (Cont)
Proofex® Torchseal® A800 Proofex® Torchseal® A700 Proofex® Torchseal® A900 Proofex® Torchseal® A625 Proofex® Torchseal® A825
Description 4mm thick, reinforced elastoplastomeric 4.5mm thick polymer-bitumen waterproofing 5mm thick, reinforced elastoplastomeric 4.5mm thick, mineral finish, reinforced polymer 4.5kg/m², mineral finish, reinforced polymer –
polymer – bitumen waterproofing membrane. membrane that creates a continuous root polymer – bitumen bridge deck waterproofing – bitumen waterproofing membrane. bitumen waterproofing membrane.
barrier. membrane.
Type Base layer Anti-root layer Bridge deck Exposed top layer Exposed top layer
Typical uses Foundations, basements and tunnels. For waterproofing systems in contact with the Bridge decks and viaducts, roads, carparks, Roofs and other UV exposed areas as a single Roofs and other UV exposed areas as a single
ground or where there is a risk of the system foundations, earthquake-proof foundations, layer, or, as part of a multi-layer system. layer, or, as part of a multi-layer system.
being attacked by roots, such as roof gardens, subways and tunnels.
foundations, underground structures, tunnels
and gravel covered roofs.
General advantages Handles ponding and permanently wet Creates a root barrier. High resistance to puncture, high mechanical Mineral finish provides long term UV Mineral finish provides long term UV
conditions. Good puncture and joint cut resistance and good joint cut resistance. resistance. resistance.
resistance.
Reinforcement type Non-woven polyester with a continuous Rot-proof single strand non-woven polyester Non-woven polyester Non-woven polyester with a continuous Non-woven polyester with a continuous
filament placed in the thickness of the fabric filament placed in the thickness of the filament placed in the thickness of the
membrane membrane membrane
Impermeability to water (EN1928 B method) ≥ 60 kPa ≥ 60 kPa ≥500 kPa ≥ 60 kPa ≥ 60 kPa
Size 1m wide x 10m roll 1m wide x 10m roll 1m wide x 10m roll 1m wide x 10m roll 1m wide x 10m roll
Coverage (approx.)* 9m² / 10m roll 9m² / 10m roll 9m² / 10m roll 9m² / 10m roll 9m² / 10m roll
Primer (depends on surface porosity) Fosroc Primer 24 Fosroc Primer 24 Fosroc Primer 24 Fosroc Primer 24 Fosroc Primer 24
8 9
Waterproofing Ancillary Products
Primer 24
Fosroc Primer 24 is used prior to the application of Torchseal membranes to reduce the porosity of
concrete substrates and aid adhesion of the membrane.
Backfill Applications
Where the membrane is to be back filled, such as basement applications, Proofex Torchseal A500 should be protected
from mechanical damage with Proofex Sheetdrain 81 drainage protection system or Proofex Protection Board PP.
Please always refer to the product TDS before making your final selection or speak to your Fosroc representative.
10
Fosroc Technology Advantages & Limitations
General • Not limited to size or shape of • Cold applied • Bonded with heat to produce an
substrate/surface extremely strong bond
Technology • QA assured thickness
• N
o separate sealing of • Bonded directly to the substrate
Advantage • Fully bonded overlaps
seams/edges
• Cut to any size or shape
• Best for retaining walls and bridge
• Best suited to smaller and
decks under asphalt • Assured thickness
intricate work
• Good for highly exposed areas such
as large, open situations
General • Can be prone to leakage from • Require protection boards • Must correctly seal seams
uneven application
Technology • Must correctly seal seams • Must cut to fit exactly
• Need to apply several coats
Limitations • Must cut to fit exactly • Must use skilled installers
FUTURE
PROOF
WITH FOSROC
WATERPROOFING
11 11
World leaders in construction solutions
Fosroc is a world leader in the delivery of virtually any type of
construction project, combining high quality products, expert
technical support, customer service and innovation.
Fosroc, Proofex and the Fosroc logo are trade marks of Fosroc International Limited, used under licence.
Project images are representations of the types of projects these products can be used for.
08/20