Professional Documents
Culture Documents
Document
Document
LAW OF TRIANGLE If two con current acting on a body. Represent two side of a triangle. In magnitude
and direction. Then its third side represent the resultant in magnitude in opposite direction.
R=F1+F2
POLYGAN LAW Went to war more forces acting on a body. And polligan side represent forts magnitude
and direction. Then there resultant represents in last side of polygon.
R=F1+F2+F3+F4
F3
F4 F4 F2
F1
SYSTEM OF THE FORCE If two or more force acting on a object, then this set of these force is called
system of the force.
Classification of system of force(1) – ON THE BASIS OF CO-PLANER= When are the ports they are acting
under some plane.
(2)- Honda basis of non-coplanar = When all the forts acting on different plane.
(1)= Con current forces= When all the forces at the same At the same point.
(2)= non con current force When all the forces acting at different point.
(a) Co-planner and Concurrent. When older force acting at the same point on the one plane.
(b) Coplanar end non-coplanar force= When all forces acting at different points. In one plane.
(c) non co-planner and concurrent When all the forces acting at the same point but different plane.
(d) Non coplanar and non con-current When all the forces acting different point and different planes
Lama’s theorem If three forces acting at a single point are in equilibrium, then each of the forces is
directly proportional to the sine Of the angle between the remaining two sides.
Friction
friction ia a force resisting the relating motion of the solid surface and material element sliding against
each other.
Type of the Friction (1)= Static Friction when two body’s touching each other in equilibrium then
situation friction at the contact point is called static friction.
(2)Limiting friction = when one body is in sliding over another when they is a condition of limiting
equilibrium then the friction is produce.
(3) Dynamic Friction = When a body is slipping on the another body in this condition the friction
produce at their contact point is called dynamic friction.
Coefficient of the force The ratio of the friction force to the normal reaction is called coefficient of the
force. It is denoted by (M)
M=F/RN
Law of friction the friction force acting opposite to force (opposite to motion)