TECHNICAL MANUAL,
Remote ATM [Pilt_SCF
ip [162.160.0200
Fon
Timeout (msec)
Wit senc (msec
GQ erenies
G9!) check return code
send forpracessing" images
send “for presentation images
enable SC
@) erstiewers
Iie
[Defaurtin
ont Asus ASHTON
ok
18. Compile all fields with DICOM server information
19.In particular, in the section “INI file"
click on the icon above in green and then select a printer between the ones
available.
If the printer to install does not exist, it is suggested to open the Default ini
and save it with the name of the printer to install.
MTDM10C-U02b CHAPTER Ill Page 70 of 75TECHNICAL MANUAL
20.Always in the section “INI FILE”, for the chosen printer, click on the icon
above in red and then verify in the .INI FILE the following keys:
= DPI
= FilmSizeAvailability;
+ FilmSizeResolution;
= FilmSizeResolutionLandscape.
All those values can be found in technical documentation of the printer.
In particular, for the last three keys: for each media type present in
“FilmSizeAvailability’, set the correspondent resolution in pixels in
“FilmSizeResolution’. Moreover, if the values of landscape resolution are
different from those ones in portrait resolution, set and specify them using the
key “FilmSizeResolutionLandscape’
This an example: considering the following dataset with 508 DPI and
media sizes (1): 8x10
resolution in Portrait (1): 3807x4819
resolution in Landscape (1) : 4931x3795
media sizes (2): 10x14
resolution in Portrait (2): 5075x7043
resolution in Landscape (2): 7043x5075
media sizes (3): 14x17
resolution in Portrait (3): 6999x8339
resolution in Landscape (3): 8339x6999
the .INI FILE of the printer would like the following:
MTDM10C-U02b CHAPTER II Page 71 of 75TECHNICAL MANUAL,
trrintersettings]
£4 ]msizeavai Tabi 14 ty=BINXLOIN\LOX14IN\14INX171N
Fi Is izeResolut ion=3907-4819\5075-7043\ 6999-8339
£4 In szeRasolutiont andscape=4931-3795\7043-5075\8339-6999
Dpr=508 DPT
Even if only one size between all the available has different
NOTE resolutions in Portrait and Landscape (as in the previous
example), all the data have to be indicated in the key
“FilmSizeResolutionLandscape"
24. Select X button in OK column and, if server is properly configured, following
flag is shown in server list window
: 7
Berend
MTDM10C-U02b_ CHAPTER Ill Page 72 0f 75TECHNICAL MANUAL,
22,For the configuration of the EXPORT and MAKE CD functions, first of all, add
anew server:
at ee]
wats eee |
1 cms
B vrrenes
eo erroccesrar anes
GD won saves
Fa
MTDM10C-U02b CHAPTER Ill Page 73 of 75TECHNICAL MANUAL,
LA NOTE It is suggested (but not mandatory) to
rename the Remote AETitle with a
more intuitive value (e.g “EXPORT
RAW" or “EXPORT")
24. disable the “send “for processing” images” (default configuration) as below:
et =
‘art nes
25. Alternatively, it is also possible enable the “send “for processing’ images” as.
below.
MTDM10C-U02b CHAPTER Ill Page 74 of 75TECHNICAL MANUAL,
| serps
@ owe
G21 s208 meats
(Omens
26. Select X button in Ok column to save the settings.
NoTE This CDBOX must be the first one of all the CDBOX
presents, Otherwise, this server will acquire the configuration
mode of the first one of the server list, independently from its
‘own setting.
27.For other Server, the same procedure described in previous steps has to be
followed.
5.2.2- STANDALONE CONFIGURATION
Follow the previous operation by step 8 to the end
5.2.3 DETECTOR CALIBRATION
Refer to chap.4
MTDM10C-U02b CHAPTER Ill Page 75 of 75