Professional Documents
Culture Documents
Zone 2 - 1HB21 RC Beam Analysis & Design (EN1992)
Zone 2 - 1HB21 RC Beam Analysis & Design (EN1992)
1HB21
In accordance with EN1992-1-1:2004 incorporating Corrigenda January 2008 and the Singapore national annex
Tedds calculation version 3.3.10
ANALYSIS
Tedds calculation version 1.0.37
Geometry
Geometry (m) - Concrete (C28 2500 Quartzite)
Permanent
Imposed
Load combination
Member Loads
Member Load case Load Type Orientation Description
Beam Permanent UDL GlobalZ 21 kN/m
Beam Permanent UDL GlobalZ 28 kN/m
Beam Permanent Point load GlobalZ 11 kN at 0 m
Beam Imposed UDL GlobalZ 63 kN/m
Results
Reactions
Load case: Self Weight
Node Force Moment
Fx Fz My
(kN) (kN) (kNm)
2 0 386.8 0
3 0 135.1 0
Load case: Permanent
Node Force Moment
Fx Fz My
(kN) (kN) (kNm)
2 0 468.4 0
3 0 152.7 0
Load case: Imposed
Node Force Moment
Fx Fz My
(kN) (kN) (kNm)
2 0 581.3 0
3 0 203.1 0
Load combination: 1.35G + 1.5Q + 1.5RQ (Strength)
Node Force Moment
Fx Fz My
(kN) (kN) (kNm)
2 0 2026.4 0
3 0 693.2 0
Load combination: 1.0G + 1.0Q + 1.0RQ (Service)
Node Force Moment
Fx Fz My
(kN) (kN) (kNm)
2 0 1436.5 0
3 0 490.9 0
2Q (Quasi)
Load combination: 1.0G + 1.0
Node Force Moment
Fx Fz My
(kN) (kN) (kNm)
2 0 1436.5 0
3 0 490.9 0
Project Job no.
Forces
Strength combinations - Moment envelope (kNm)
Design compressive concrete strength - exp.3.15; fcwd = ccw fck / C = 18.7 N/mm2
Maximum aggregate size; hagg = 20 mm
Density of reinforced concrete; = 2500 kg/m3
Monolithic simple support moment factor; 1 = 0.25
Reinforcement details
Characteristic yield strength of reinforcement; fyk = 500 N/mm2
Partial factor for reinforcing steel - Table 2.1N; S = 1.15
Design yield strength of reinforcement; fyd = fyk / S = 435 N/mm2
Beam - Span 1
Flanged section details
Section width; b = 1500 mm
Section depth; h = 600 mm
Maximum available flange width; bf = 4200 mm
Flange depth; hf = 300 mm
PASS - Minimum dimensions for fire resistance met
Moment design
Project Job no.
Service stress in reinforcement; sr = fyd As,req / As,prov RPL = 137 N/mm2
Maximum bar spacing - Tables 7.3N; sbar,max = 300 mm
PASS - Maximum bar spacing exceeds actual bar spacing for crack control
Minimum bar spacing (Section 8.2)
Top bar spacing; stop = (b - (2 (cnom_s + m1_s1_z2_v ) + m1_s1_z2_t_L1 Nm1_s1_z2_t_L1 )) /
(Nm1_s1_z2_t_L1 - 1) = 74.2 mm
Minimum allowable top bar spacing; stop,min = max(m1_s1_z2_t_L1 ks1, hagg + ks2, 20mm) = 25.0 mm
PASS - Actual bar spacing exceeds minimum allowable
Bottom bar spacing; sbot = (b - (2 (cnom_s + m1_s1_z2_v ) + m1_s1_z2_b_L1 Nm1_s1_z2_b_L1 )) /
(Nm1_s1_z2_b_L1 - 1) = 79.6 mm
Minimum allowable bottom bar spacing; sbot,min = max(m1_s1_z2_b_L1 ks1, hagg + ks2, 20mm) = 25.0 mm
PASS - Actual bar spacing exceeds minimum allowable
Shear design
Project Job no.
Beam - Span 2
Flanged section details
Section width; b = 1500 mm
Section depth; h = 600 mm
Maximum available flange width; bf = 4200 mm
Flange depth; hf = 300 mm
PASS - Minimum dimensions for fire resistance met
Moment design
Service stress in reinforcement; sr = fyd As,req / As,prov RPL = 282 N/mm2
Maximum bar spacing - Tables 7.3N; sbar,max = 147 mm
PASS - Maximum bar spacing exceeds actual bar spacing for crack control
Shear design