Professional Documents
Culture Documents
0064 Catterpillar 793d-Wvjuzu
0064 Catterpillar 793d-Wvjuzu
Wide : 22 cm
High : 19 cm
Long : 38.4 cm
CATERPILLAR 793D
Ready to print PDF
It’s all quick and easy to make
A4
Build it using common tools and Sheet
easy materials to find.
WARNING
COPYRIGHT INFORMATION
Plans and pa erns in this Package For personal use only, the content owner gives non-exclusive buyer permission
to view, download and copy content. buyers must comply with the content owner rules. The content owner has
exclusive rights to the content that is owned in the present and in the future.
1. Use of content for commercial purposes is prohibited, content cannot be resold, re-licensed or sub-licensed,
leased and mass produced.
2. Distribu ng or sharing content for any reason is prohibited. Sharing of content is only permi ed via the official
website link of the content owner h ps://kayunganjuk.com
3. The reuse of content in the form of photo or video files is permi ed by giving credit to the content owner at
h ps://kayunganjuk.com
Notes to Readers:
Due to individual condi ons, tools and skills, we are not responsible for any damage, injury suffered, or loss that
occurs as a result of following the informa on published in this set of plans. Before star ng any instruc ons
carefully review the project. If you have any doubts or ques ons, please con nue to consult with local experts or
authori es.
CONTENT
Cover ....................................................................... 1
Front View
Rear View
Top View
Bo om View
Rigth View
Le View
39
40
41
44
45
42 12
46 43 11
10
46
32 30 19
47
18 47
28 19
48 16
25 31 15
17
29 36 14
27 26 33 13
37
38 35
51 52
50 34 36
49
51 49
50
50 49
49
37
4 55
1
3 49 38
50 52
8 49
55
22 49
22 9 49
50
50
20 2a 51 51
24 53
54
23 2b
21
23 22
22 5a
6
IMPORTANT NOTE
1. Before cu ng the material, cover the surface with masking tape or vinyl s ckers, this is to make it easier to s ck
or remove the cut pa ern on the material without leaving glue marks on the material.
2. Make sure the thickness of the material is in accordance with the instruc ons on the cu ng pa ern that we set,
this will greatly affect the construc on and other parts during assembly.
3. Assemble each part using wood glue or PVA glue on the wide part, use a clamp for maximum results, use super
glue or all-purpose liquid glue in small parts.
ALTERNATE DOWELS
In general, we use 5mm diameter food chops cks as a dowel on the wheel and a 3mm diameter toothpick as the
steering wheel.
2a 1 2b
Step 1 Step 2
Combine parts 1, 2a and 2b into one sec ons, use super glue / Combine part 3 into one sec ons, use super glue / liquid glue
liquid glue (see picture) (see picture)
5b
6 5a
Step 3 Step 4
Combine part 4 into one sec ons, use super glue / liquid glue Combine parts 5a,5b and 6, 7 into one sec ons, use super glue /
(see picture) liquid glue (see picture)
12
11
8
10
Step 5 Step 6
Combine parts 8 and 9 into one sec ons, use super glue / liquid Combine part 10, 11 and 12 into one sec ons, use super glue /
glue (see picture) liquid glue (see picture)
15
14 13
Step 7 Step 8
Combine parts into one sec ons, use super glue / liquid glue Combine part 13 and 14 into one sec ons, I use ribbon cloth as
(see picture) a hinges, use super glue to connected
16
15
14
Step 9 Step 10
Combine parts 14, 15 and 16 into one sec ons, use super glue / Combine parts into one sec ons, use super glue / liquid glue
liquid glue (see picture) (see picture)
19 18 17
18
19
Step 11 Step 12
Combine parts 18 and 19 on the le and right side into one Combine parts into one sec ons, use super glue / liquid glue
sec ons, use super glue / liquid glue (see picture) (see picture)
21
20
Step 13 Step 14
Combine parts 20 and 21 into one sec ons, use super glue / Combine parts into one sec ons, use super glue / liquid glue
liquid glue (see picture) (see picture)
22
22
23
Step 15 Step 16
Combine parts 22 and 23 into one sec ons, use super glue / Combine parts on the le and right side into one sec ons, use
liquid glue (see picture) super glue / liquid glue (see picture)
25
26
24
Step 17 Step 18
Combine parts 24 into one sec ons, use super glue / liquid glue Combine parts 25 and 26 into one sec ons, use super glue /
(see picture) liquid glue (see picture)
28 27 29
30
32 31
33
Step 19 Step 20
Combine parts 27, 28 and 29 into one sec ons, use super glue / Insert parts 32 to 30 and 33 to 31 into one sec ons, use super
liquid glue (see picture) glue / liquid glue (see picture)
31 35
30
34
Step 21 Step 22
Combine parts 30 and 31 into one sec ons, use super glue / Combine parts 34 and 35 into one sec ons, use super glue /
liquid glue (see picture) liquid glue (see picture)
36
38 37
36
37
38
Step 23 Step 24
Combine parts 36 on the le and right side into one sec ons, Combine parts 37 and 38 on the le and right side into one
use super glue / liquid glue (see picture) sec ons, use super glue / liquid glue (see picture)
44
43
42
Step 25 Step 26
Combine parts into one sec ons, use super glue / liquid glue Combine part 42, 43 and 44 into one sec ons, use super glue /
(see picture) liquid glue
41
40
39
39
40
46 41
46
Step 27 Step 28
Combine parts 39, 40, 41 and 46 into one sec ons, use super Combine parts into one sec ons, use super glue / liquid glue
glue / liquid glue (see picture) (see picture)
45
47
47
Step 29 Step 30
Combine parts 45 into one sec ons, use super glue / liquid glue Combine parts 47 on the le and right side into one sec ons,
(see picture) use super glue / liquid glue (see picture)
48
Step 31 Step 32
Combine parts into one sec ons, (see picture) Insert parts 48 into one sec ons, (see picture)
53
52
51
50
49
55 49
50
49 51
50
49
54
55
Step 33 Step 34
Combine parts into one sec ons (see picture) Insert parts into one sec ons (see picture)
Step 35 Finish
Insert parts into one sec ons (see picture)
IMPORTANT NOTE
1. Print the cut pa erns that we have set, make sure the print size of the printer is accurate, print as original
documents and do not use a scale, measure the print on each cut pa ern with a ruler, if the size does not match
then adjust the printer se ngs.
2. Use paper glue and paste print cut pa erns on the material according to the thickness we have set, cut follow
the black outline and remove the white area.
1
material thick 8mm
2a 2b
material thick 8mm material thick 8mm
5b 5a
material thick material thick
8mm 6 8mm
material thick 8mm
3
material thick 8mm
4
material thick 8mm
19 18 19
material thick material thick material thick
8mm 25mm 8mm 17
material thick 25mm
15 15
10 11 12 material thick 25mm
13 14 16
material thick 5mm material thick 5mm
9
material thick 8mm
23 23
22 22 22 22
32 33
20
21 25
26
30 31
24
28 27 29
46
37 37 46
material thick 25mm material thick 25mm
38 38
34 35
material thick 8mm material thick 8mm
36 36
material thick 8mm material thick 8mm
hole hole
diameter diameter
11mm 11mm
hole hole
diameter diameter
5mm 5mm
rear
42
material thick 8mm
front
cut 10 degrees
on the red line
43 side view
43
material thick 8mm
cut 21 degrees
on the red line
44
material thick 8mm
& &
52 52
51 51
53
54
51 51
53
54
49 49
49 49
49 49
49 49
50 50
50 50
50 50
We are basically ordinary human beings, have the wrong nature and forget.
If you find any errors in this plan set, Please forgive and remind us.
Your cri cisms and sugges ons mean a lot to us, so that we can develop and get be er in the future.
Posi ve benefits to the world community.
Contact us
Email : kayunganjuk@gmail.com
Website : kayunganjuk.com
Pinterest : id.pinterest.com/kayunganjuk
Instagram : instagram.com/kayunganjuk
Facebook : facebook.com/fbkayunganjuk
Youtube : youtube.com/c/kayunganjuk