Professional Documents
Culture Documents
Bumpy Pumpkin
Bumpy Pumpkin
Bumpy Pumpkin
Materials needed:
CH = chain
ST/STS = stitch/stitches
RS = right side
SC = single crochet
TR = treble crochet
[ ] = used to repeat a longer set of instructions between these brackets, the number of times given
Gauge: not critical for this project but may affect the yarn quantities required
Additional notes:
The Pumpkin:
To start: CH 52
Row 1: RS
TURN
Row 2: WS
1.
2.
3.
4.
5.
Row 3: RS
Row 4: WS
Row 5: RS
Same as Row 3
TURN
(51 SC)
Row 22: WS
Same as Row 2
TURN
Row 23: RS
Same as Row 3
(51 SC)
Fasten off, leave a long tail (I left 80 cm/31”) to sew the ends together.
Finishing:
Bring the two short sides together, the WS should be outside. Sew the two sides together (Pic 1),
then flip it inside out. Stitch a running stitch along the bottom edge of your pumpkin and pull to
cinch closed (Pic 2). Pull it really tight, then stitch a couple of times around to keep it closed and
fasten off. (I usually go from one side to another a couple of times. I have created a video to
show how I sew my ends in which might be helpful: https://youtu.be/F3VkG1qTPLw)
Fill it with stuffing but make sure you don’t stuff it really tight (Pic 3). Stitch a running stitch
along the top edge of your pumpkin (Pic 4) and pull the top closed but leave a small opening,
secure and fasten off, then put your twig into the hole (Pic 5).
The Vine:
To start: CH 25
Row 1: 2 SC into the 2nd CH from the hook, 2 SC in each CH to end (48 SC)