Download as pdf or txt
Download as pdf or txt
You are on page 1of 87

January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

1. BOQ for Central Zone

BOQ -1- Three Phases Electrical Submersible Pumps & Generator set for Rama Town water Supply Utility office.
S/r Description
1 Supply three Phase Electrical Submersible pump. Specific Unit Qty. Unit Total
Site price price
Supply of three phase Electrical Submersible pump with Q=12m3/hr
1.1 @H=137m with pump Power of 9.2k.w. The pump should be work at
its maximum efficiency point according to the specification with all
necessary accessories such as:-
 Electrical Power cable length should be 250 meter (if the pump
motor connection is star delta starting system, the power cable
should be double of the given length).
 One set control panel which is compatible with motor starting
system. Borhole-2 Set 01
Spare parts of switch board/control panel elements.
 Phase sequence relays one pcs.
 Timers relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 500m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star-delta starting system, the Volcanizing kit will be
double.
 Casing diameter 6''.
1.2 Supply of three phase Electrical Submersible pump with Q=22m3/hr @
H=192m & with pump Power of 15k.w.The pump should be work at
its maximum efficiency point according to the specification with all
necessary accessories such as:-
 Electrical Power cable length should be 250 meter (if the pump
motor connection is star delta starting system, the power cable Borhole-4 Set 01
should be double of the given length).
 Control panel, one set based on the motor starting system.
Spare parts of Control panel elements.
 Phase sequence relays one pcs.
 Timers relay one pcs.
 Over load relay one pcs.
 Surge arrester one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 500m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece

1
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

 Two pair of 2 1/2'' pipe clamp


 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will be
double.
 Casing diameter 6''.
Supply of three phase Electrical Submersible pump with Q=22m3/hr @
1.3 H=162m & with pump Power of 13k.w.The pump should be work at
its maximum efficiency point according to the specification with all
necessary accessories such as:-
 Electrical Power cable length should be 250m (if the pump motor
connection is star delta starting system, the power cable should be Set 01
double of the given length).
 Control panel, one set based on the motor starting system.
Spare parts of Control panel elements.
 Phase sequence relays one pcs.
 Timers relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 500m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 2 1/2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will be
double.
 Casing diameter 6''.
1.4 Supply of three Phases diesel driven Generator set 100 kva. Set 01
1.5 Change over switch 690v/80A. Pcs 01
1.6 Gs heavy duty riser pipe 2 1/2". Borehole-3 meter 86
1.7 Gs heavy duty riser pipe 2 1/2". Borehole-4 meter 86
1.8 Gs heavy duty riser pipe 2". Borehole-3 meter 60
1.9 Large Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).
2.0 Medium Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).
2.1 GI Pipe Thread extractor 1/2" - 2" set 02
2.2 GI Pipe Thread extractor 2"- 4" set 02
2.3 GI Pipe Thread extractor 3"- 6" set 02
2.4 --KW, 400/230V Arc Welding Machine (that can be weld up to 8" heavy set 01
duty GI pipe).
2.5 HDPE Welding machine from 65-160mm2 with all accessories. set 01
2.6 HDPE welding machine from 90-315mm2 with all accessories set 02
Total Sub cost

2
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

BOQ-2- For Three phases Electrical Submersible Pump for Edaga-Arbi Town water supply Utility Office.
S/r Description
1. Supply Electrical submersible pump Specific Unit Qty. Unit Total
site price Price
1.1 Supply of three phase electrical Submersible pump with Q=31m3/hr
@H=310m & with pump Power of 37.k.w. The pump should be
work at its maximum efficiency point according to the specification
with all necessary accessories such as:-
 Electrical Power cable length should be 150 meter (if the pump
motor connection is star delta starting system, the power cable Ruba-
should be double of the given length). Tsedya Set 01
 Control panel, one set based on the motor starting system.
Spare parts of Control panel elements.
 Phase sequence relays one pcs.
 Timers relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 3'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will
be double.
 Casing diameter 8''.
2. Supply of Electrical Driven Horizontal Multistage Surface pumps. Specific Unit Qty. Unit Total
site price price
2.1 Supply horizontal Multi Stage end suction Surface Pump With
=37m3/hr@H=185m & with pump Power of 30k.w. The Pump should
work at its Maximum efficiency point according to the specification
with all necessary accessories such as:-
 Total Electrical power cable for the two pumps120m length &
Compatible to Motors Power size.
 Control panel one set compatible to the motor starting.
Spare parts for single Control panel elements. Collection set 02
 Phase sequence relays one pcs. Chamber
 Timers relay one pcs. (Adena)
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable 1.5mm2*240m for each pump.
 Electrode sensor 02 piece for each pump.
 Volcanizing kit, 2 set for star delta starting system for each
pump.

3
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

 Two piece of flanged plate and heavy duty pipe with 2 meter
length, the same size with out-let Pump & 90° flanged elbows for
the out-let Pump?
 Two piece flanged plate and heavy duty pipe with 2 meter length,
the same size of with inlet let pump & 90° flanged elbows for the
inlet let Pump.
 For all fittings rubber gasket, bolts & nuts will be consider.
 Both Pumps & the driver shall be mounted or fix on Common
fabricated steel bed plate (base plate) with bolts and nuts.
 Anchor bolts or foundation bolts with their nuts should be supply
and with stand the pump and driver inertia torque during starting
and stopping.
 Eccentric and Concentric reducer proportional to pump inlet &
outlet.
 0-60 bar pressure gauge one piece
 All fittings and pipes should be PN 25.
2.2 Supply of three phase electrical Submersible pump with Q=7.92m3/hr
@H=158m & with pump Power of 7.5 k.w. The pump should be
work at its maximum efficiency point according to the specification
with all necessary accessories such as:-
 Electrical Power cable length should be 150 meter (if the pump
motor connection is star delta starting system, the power cable May-Eira set 01
should be double of the given length).
 Control panel, one set based on the motor starting system.
Spare parts of Control panel elements.
 Phase sequence relays one pcs.
 Timers relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will
be double.
 Casing diameter 6''.
2.3 Change over switch 690v/100A. Ruba Pcs 01
2.4 Gs Heavy duty borehole riser pipe 2". tsedya m 78

2.5 Gs Heavy duty borehole riser pipe 2". May-Era m 72


2.6 Large Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).
2.7 Medium Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).

4
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

2.8 GI Pipe Thread extractor 1/2" - 2" set 02

2.9 GI Pipe Thread extractor 2"- 4" set 02


3.0 GI Pipe Thread extractor 3"- 6" set 02
3.1 --KW 400/230V Arc Welding Machine(that can be weld up to 8"heavy set 01
duty GI pipe) and its accessary.
3.2 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
3.3 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). set 01
3.4 HDPE welding machine from 65-160mm2 with all accessories set 01
Total Sub Cost…..

BOQ -3 Part-A. Three phase Electrical Horizontal & Vertical Surface Pumps for Adwa Water Supply Treatment Plant & Pump
House.
S.No Description
1 Supply of Electrical Driven Horizontal Multistage Surface pumps. Specific Use Unit Qty. Unit Total
price price
1.1 Supply horizontal Multi Stage end suction Surface Pump With Q
=87.5m3/hr@ H=50m with pump Power of 30 k.w.The Pump should
work at its Maximum efficiency point according to the specification with
all necessary accessories such as:-
 Total Electrical power cable 150m length & Compatible to Motors
Power size.
 Control panel one set. For Adwa
. Spare parts for one Control panel elements. host
 Phase sequence relays one pcs. community, Set 03
 Timer relay one pcs. Textile &
 Surge arrester one pcs. IDP centers.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable 1.5mm2*150m length.
 Electrode sensor 02 piece.
 Volcanizing kit, 2 set for star delta starting system for each pump.
 Three piece of flanged plate and heavy duty pipe with 2 meter
length, the same size with out-let Pump & 90° flanged elbows for
the out-let Pump.
 Three piece flanged plate and heavy duty pipe with 2 meter length,
the same size of with inlet let pump & 90° flanged elbows for the
inlet let Pump.
 For all fittings rubber gasket, bolts & nuts will be consider.
 Both Pumps & the driver shall be mounted or fix on Common
fabricated steel bed plate (base plate) with bolts and nuts.
 Anchor bolts or foundation bolts with their nuts should be supply
and with stand the pump and driver inertia torque during starting

5
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

and stopping.
 Eccentric and Concentric reducer based on the pump inlet & outlet.
 40 bar pressure gauge one piece
 All fittings and pipes should be PN 25.
 Inlet suction side flanged DN 125/125mm
 Outlet Discharge side flanged-DN 100/114.3mm
1.2 Supply horizontal Multi Stage end suction Surface Pump With
Q=82.5m3/hr @ H=88m with pump Power of 37k.w.The Pump should
work at its Maximum efficiency point according to the specification with
all necessary accessories such as:-
 Total Electrical power cable 120m length & Compatible to Motors
Power size.
 Control panel one set.
. Spare parts for one Control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs. For Adwa Set 05
 Over load relay one pcs. town & IDP
 Level controls relay one pcs. centers.
 Delta/main contactor one pcs.
 Electrode cable 1.5mm2*240 m length.
 Electrode sensor 02 piece.
 Volcanizing kit, 2 set for star delta starting system for each pump.
 Three piece of flanged plate and heavy duty pipe with 2 meter
length, the same size with out-let Pump & 90° flanged elbows for
the out-let Pump.
 Three piece flanged plate and heavy duty pipe with 2 meter length,
the same size of with inlet let pump & 90° flanged elbows for the
inlet let Pump.
 For all fittings rubber gasket, bolts & nuts will be consider.
 Both Pumps & the driver shall be mounted or fix on Common
fabricated steel bed plate (base plate) with bolts and nuts.
 Anchor bolts or foundation bolts with their nuts should be supply
and with stand the pump and driver inertia torque during starting
and stopping.
 Eccentric and Concentric reducer
 40 bar pressure gauge one piece
 All fittings and pipes should be PN 25.
 Inlet suction side flanged DN 125/125mm
 Outlet Discharge side flanged-DN 80/80 mm
1.3 Supply Horizontal Multi Stage end suction Surface Pump With
Q=45m3/hr @ H=25m with Power of 7.5k.w.The Pump should work at
its Maximum efficiency point according to the specification with all
necessary accessories such as:-
 Total Electrical power cable 150m length & Compatible to Motors
Power size.
 Control panel one set.
. Spare parts for one Control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs.

6
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

 Over load relay one pcs. Used for Set 03


 Surge arrester one pcs. Back wash
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable 1.5mm2*3000m length.
 Electrode sensor 02 piece.
 Volcanizing kit, 2 set for star delta starting system for each pump.
 Three piece of flanged plate and heavy duty pipe with 2 meter
length, the same size with out-let Pump & 90° flanged elbows for
the out-let Pump.
 Three piece flanged plate and heavy duty pipe with 2 meter length,
the same size of with inlet let pump & 90° flanged elbows for the
inlet let Pump.
 For all fittings rubber gasket, bolts & nuts will be consider.
 Both Pumps & the driver shall be mounted or fix on Common
fabricated steel bed plate (base plate) with bolts and nuts.
 Anchor bolts or foundation bolts with their nuts should be supply
and with stand the pump and driver inertia torque during starting
and stopping.
 Eccentric and Concentric reducer
 40 bar pressure gauge one piece
 All fittings and pipes should be PN 25.
 Inlet suction side flanged DN 80/80mm
 Outlet Discharge side flanged-DN 3 inch/76.10 mm
1.4 Supply Vertical Multi Stage end suction (side suction and top discharge)
Surface Pump With Q=30m3/hr @ H =274.7m with pump Power of
30k.w.The Pump should work at its Maximum efficiency point
according to the specification with all necessary accessories such as:-
 Total Electrical power cable 50m length & Compatible to Motors
Power size.
 Control panel one set based on the motor starting system.
. Spare parts for one Control panel elements. Used for
 Phase sequence relays one pcs. Adiberak Set 02
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable 1.5mm2*100m length.
 Electrode sensor 02 piece.
 Volcanizing kit, 2 set for star delta starting system for each pump.
 Two piece of flanged plate and heavy duty pipe with 2 meter
length, the same size with out-let Pump & 90° flanged elbows for
the out-let Pump.
 Two piece flanged plate and heavy duty pipe with 2 meter length,
the same size of with inlet let pump & 90° flanged elbows for the
inlet let Pump.
 For all fittings rubber gasket, bolts & nuts will be consider.
 Both Pumps & the driver shall be mounted or fix on Common
fabricated steel bed plate (base plate) with bolts and nuts.

7
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

 Anchor bolts or foundation bolts with their nuts should be supply


and with stand the pump and driver inertia torque during starting
and stopping.
 Eccentric and Concentric reducer
 40 bar pressure gauge one piece
All fittings and pipes should be PN 25.
1.5 Multi stage Vertical three/single phase Centrifugal pump (Lavajo pump)
with Suction head greater or equal to 8m & given delivery head.
Required Q=12 m3/hr @H=32m with pump Power of 2.2 k.w.The
pump should be work at its maximum efficiency point according to the
specification with all necessary accessories such as:-
 Proportional Electrical Power cable length should be 50m (if the Treatment set 01
pump motor connection is star delta starting system, the power
cable should be double of the given length).
 With one proportional eccentric, one concentric inlet & outlet of
suction & delivery of pump.
 Control panel, one set based on the motor starting system.
. Spare parts of Control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 100m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will be
double.
1.6 Supply horizontal Multi Stage end suction Surface Pump With Q
=82.5m3/hr@ H=88m with pump Power of 37 k.w. The Pump should
work at its Maximum efficiency point according to the specification with
all necessary accessories such as:-
 Total Electrical power cable 150m length & Compatible to Motors
Power size.
 Control panel one set including. For Adwa
. Spare parts for one Control panel element. host
 Phase sequence relays one pcs. community, Set 02
 Timer relay one pcs. Textile &
 Surge arrester one pcs. IDP centers.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable 1.5mm2*300m length.
 Electrode sensor 02 piece.
 Volcanizing kit, 2 set for star delta starting system for each pump.
 Three piece of flanged plate and heavy duty pipe with 2 meter

8
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

length, the same size with out-let Pump & 90° flanged elbows for
the out-let Pump.
 Three piece flanged plate and heavy duty pipe with 2 meter length,
the same size of with inlet let pump & 90° flanged elbows for the
inlet let Pump.
 For all fittings rubber gasket, bolts & nuts will be consider.
 Both Pumps & the driver shall be mounted or fix on Common
fabricated steel bed plate (base plate) with bolts and nuts.
 Anchor bolts or foundation bolts with their nuts should be supply
and with stand the pump and driver inertia torque during starting
and stopping.
 Eccentric and Concentric reducer based on the pump inlet & outlet.
 40 bar pressure gauge one piece
 All fittings and pipes should be PN 25.
 Inlet suction side flanged DN 125/125mm
 Outlet Discharge side flanged-DN 100/114.3mm
1.6 Supply of three phase Electrical Submersible pump with Q =10.8m3/hr.
@H=120m with pump Power of 7.5 k.w. The pump should be work at
its maximum efficiency point according to the specification with all Edaga/
necessary accessories such as:- Maygon-ao
 Electrical Power cable length should be 120m (if the pump motor Borhole
connection is star delta starting system, the power cable should be
double of the given length).
 Control panel, one set based on the motor starting system. Set 01
. Spare parts of Control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 240m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will be
double.
 Casing diameter 6''.
1.9 Chemical strier motor 0.55k.w,RPM=1500,220/380V,Insulation class B,
Degree of protection IP 55, Gear Rpm Speed of mixing 100 motor with Treatment pcs 01
gear & with reduction complete.
Total sub cost…

9
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

BOQ -3 Part-B. Electro-Mechanical Devices for pumps @ Treatment plant &Pump House in the dam station of Adwa Water
Supply.
S.No Description
Supply of Electro-Mechanical Devices for pumps @ Specific Use Unit Qty. Unit Total
2 treatment plant/Pump House in the dam station of price price
Adwa.
2.1 Three phase motor protection Switch (Thermal Magnetic breaker) 56- For pcs 10
80A with its side axillary original protection in
2.2 Three phase motor protection Switch (Thermal Magnetic breaker) 46- the pump pcs 10
63A with its side axillary original. house
2.3 Frontal Auxiliary DN - 40 LA1 NO AC pcs 20
2.4 Pump Coupling (Gomoino) size Ø140 as per sample pcs 100
2.5 Pump Coupling (Gomoino) size Ø160 as per sample pcs 100
2.6 Pump Coupling for pump model AGM2E200ZQ, or as per sample. pcs 50
2.7 4 Poles Main Power Contactor, 200 k.w, 330A, and with Coils pcs 8
voltage 220V. Ref LCIF 3304, 50/60HZ complete.
2.8 Coil for Main power contactor 4 poles, Lx1, H2202, 220/230V, pcs 06
50/60HZ.
2.9 Single Phase Lightening Arrester 15KA, 2pole, 230V. pcs 10
3.0 Three Phase Lightening Arrester 15KA, 4pole, 400V. Used at pcs 10
3.1 Start push button with Normally Open contact point Green colour. Pump house pcs 25
3.2 Stop push button with Normally open contact point red colour. & treatment pcs 25
3.3 Three phase contactor with frontal Auxiliary coil voltage of 24Vac, plant. pcs 20
type LC1 dog10,power 4 k.w.
3.4 Auxiliary contact point with 2No, type LA1 DN-20 pcs 50
3.5 Timers relay ac 15,400v, 4A, Type Res YA321M. pcs 10
3.6 Timers relay ac 15,220v, 1.5A, Type Res YA321M. pcs 10
3.7 Finder Relay 24vac,3A ac14pin pcs 20
3.8 Three phase Contactor with frontal auxiliary 400V, 16A. pcs 10
3.9 Over load relay 3Ø from 32-50A. pcs 10
4.0 Level control relay with basement 11 pins, coil voltage 220v/230V, pcs 15
2KVA SJ175230, 50/60hz.
4.1 Phase control relay with basement 11 pins, coil voltage 220v/230V pcs 10
Ac, SJ175230, 50/60hz.
4.2 Voltage control relay 400 - 480V AC under voltage protection AC- pcs 10
360-400V up and down.
4.3 Level control for conductive liquids 5A, coil voltage 220V AC. pcs 05
4.4 Control transformer 100VA, input 220V/380, 100VA output 24VAC. pcs 10
4.5 Control transformer 160VA, input 220V/380, 100VA out pcs 10
put220VAC.
4.6 Voltage control relay 400 - 480V AC under voltage protection AC- pcs 10
360-400V up and down or min/max.
4.7 Fuse 15KVA pcs 10
4.8 Electrical Power Cable For Generator 4*90mm2 Used for
pump house meter 120
4.9 Three phase diesel Generator set 30 kva with necessary accessary. Used at dam
outlet. set 01
5.0 Solar PV panels including inverter, controller & PV disconnector to Used at set 01

10
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

replace /instead of 220kva Generator & to use during electric Pump house.
interruption.
5.1 Air filter for Perkins Generator (part number- P78-0331). pcs 05
5.2 Oil Filter (part number -26540238). pcs 10
5.3 Fuel filters BF 7632. pcs 10
5.4 Water filter element WF 2076 Used in the pcs 10
5.5 Air filter for Perkins (part number-2652C152). distribution pcs 10
5.6 Oil Filter (part number- 4627133). & pump pcs 10
5.7 Fuel Filter (part number- 26560608). house. pcs 10
5.8 Fuel Water separator (part number- 4615122). pcs 10
5.9 Mail element 2652C831 pcs 05
6.o Oil pressure bag bar 1/2" meter range 0-250 pcs 10
6.1 Magnetic flow meter pcs 02

BOQ -3 Part- C. Pipes, Fittings & Electro Mechanical tools for Adwa Treatment Pump House & Distribution Systems.
S.N Description
o
1 Pipes & Fittings Distribution Systems. Specific Unit Qty. Unit Total
Use price price
1.1 GI pipe 4" Medium Class. meter 600
1.2 GI pipe 3" Medium Class. meter 2100
1.3 GI pipe 2" Medium Class. Used at meter 1200
1.4 GI pipe 2 1/2" Medium Class pump meter 300
1.5 GI pipe 1 1/2" Medium Class house & meter 300
1.6 PVC collar DN50, PN10 with internal Ø-63mm & gaskets. distribution pcs 08
1.7 PVC collar DN80, PN10 with internal Ø-90mm & gaskets. System. pcs 06
1.8 PVC collar DN100, PN10 with internal Ø-110mm & gaskets. pcs 05
1.9 PVC collar DN150, PN10 with internal Ø-160mm & gaskets. pcs 05
2.0 PVC collar DN200, PN10 with internal Ø-280mm & gaskets. pcs 05
2.1 PVC collar DN250, PN10 with internal Ø-280mm & gaskets. pcs 05
2.2 PVC collar DN300, PN10 with internal Ø-315mm &gaskets. pcs 06
2.3 PVC Bend DN200/90,PN16 internal Ø-215mm pcs 05
2.4 PVC Bend DN250/90,PN16 internal Ø-280mm pcs 05
2.5 PVC Bend DN100/90,PN16 internal Ø-110mm pcs 05
2.6 PVC Bend DN80/90,PN16 internal Ø-90mm pcs 05
2.7 PVC Bend DN80/45,PN16 internal Ø-90mm pcs 05
2.8 PVC Bend DN280/90,PN16 external Ø-280mm pcs 05
2.9 PVC Tee DN200/90, PN16 with internal Ø-215mm & gaskets. pcs 05
3.0 DCI saddle clump DN 50, PN 16 with gaskets & other if necessary. pcs 10
3.1 DCI saddle clump DN 50, PN 16 with gaskets & other if necessary. pcs 10
3.2 DCI saddle clump DN 80, PN 16 with gaskets & other if necessary. pcs 10
3.3 DCI saddle clump DN 100, PN 16 with gaskets & other if necessary. pcs 10
3.4 DCI saddle clump DN 150, PN 16 with gaskets & other if necessary. pcs 10
3.5 DCI saddle clump DN 200, PN 16 with gaskets& other if necessary. Used at pcs 10
3.6 DCI saddle clump DN 200, PN 16 with gaskets& other necessary. pump pcs 8
3.7 DCI saddle clump DN 250, PN 16 with gaskets& other if necessary. house & pcs 8
3.8 DCI saddle clump DN 250, PN 16 with gaskets & other if necessary. distribution pcs 8
3.9 Flanged gate valve DN 300, PN 16 with gaskets & bolts + nuts. System. pcs 06

11
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

4.0 Flanged gate valve DN 250, PN 16 with gaskets & bolts + nuts. pcs 05
4.1 Flanged gate valve DN 200, PN 16 with gaskets & bolts + nuts. pcs 05
4.2 Flanged gate valve DN 150, PN 16 with gaskets & bolts + nuts. pcs 05
4.3 Flanged gate valve DN 80, PN 16 with gaskets & bolt. + Nuts. pcs 05
4.4 Flanged gate valve DN 50, PN 16 with gaskets & bolts + nuts. pcs 05
4.5 Flanged gate valve DN 125, PN 16 with gaskets & bolts + nuts. pcs 05
4.6 PVC flanged spigot DN50, PN10, internal Ø-63 mm with gaskets & pcs 05
other necessary.
4.7 PVC flanged spigot DN150, PN 10 with gasket, internal Ø-160 mm & pcs 05
other necessary.
4.8 PVC flanged spigot DN250, PN 10 with gasket, internal Ø-280 mm & pcs 05
other necessary.
4.9 PVC flanged spigot DN300, PN 10 with gasket, internal Ø-315 mm & pcs 05
other if necessary.
5.0 DCI flat gasket DN200, internal Ø-215mm. pcs 06
5.1 PVC Socket gasket DN50,PN 10 internal Ø-63mm. pcs 100
5.2 PVC Socket gasket DN80,PN 10 internal Ø-90mm. pcs 100
5.3 DCI Socket gasket DN100,PN 10 internal Ø-110mm. pcs 100
5.4 PVC flanged gasket DN200 , internal Ø-215mm. pcs 5
5.5 PVC flanged Socket DN50,PN 10 internal Ø-63mm. pcs 05
5.6 PVC flanged Socket DN100,PN 10 internal Ø-110mm. pcs 05
5.7 PVC flanged Socket DN200,PN 10 internal Ø-115mm. pcs 05
5.8 PVC flanged Socket DN250,PN 10 internal Ø-280mm. pcs 05
5.9 Dismantling DN 80, PN 16. pcs 05
6.0 Dismantling DN 150, PN 16. pcs 05
6.1 Floating Valve DN 300. pcs 04
6.2 Floating Valve DN 250. pcs 04
6.3 Floating Valve DN 100. pcs 04
6.4 Floating Valve DN 90. pcs 04
6.5 Flanged Check valve with gasket & bolt + nut DN125,PN 40 internal Ø- pcs 05
280mm.
6.6 Air release valve with integral flanged 1/2" PN 10/16, with gaskets & Pcs 10
bolts + nuts.
6.7 Better flay valve with hand weal DN 200, PN 16 Length 6cm & operated Ref1M173 pcs 02
by hand wheal with all if necessary such as gasket, bolts & nus etc. T6K3GXC.
6.8 Flanged water meter (cold) DN 150mm, PN16, and B-class with gaskets, Pump pcs 03
bolts & nuts. Nominal flow rate 150 m3 /hr. max 300 & minimum flow house
rate Qmin iso 4.3m3/hr. Measuring range +5% real1.8 Measuring range
+2% real 4 transition flow rate Q+.
6.9 Flanged water meter (cold) DN 100mm, PN16 B-class, With gaskets,
bolts & nuts. Nominal flow rate 60m3/hr. Maximum flow rate 120 m3 pcs 03
/hr.& minimum flow rate Qmin iso 1.8m3/hr. Length 4.3cm horizontal
installation position with number of holes 8 in number & 6 digits.
7.0 Flanged water meter (cold) DN 200mm, PN16 B-class, with gaskets,
bolts & nuts size of 24. BS2789,EN1663 Standard flanged length of pcs 03
34cm & flanged Ø 145cm.
7.1 Flanged water meter (cold) DN 350mm, PN16 B-class, with gaskets,
bolts & nuts. Nominal flow rate 800m3 /hr. at length of 48.5 cm pcs 02
horizontal installation position.
7.2 Water truck with volume/capacity of 18-20 m3, As per attached pcs 01

12
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

specification
7.3 Smart UPS battery (uninterrupted power supply or power bank) for pcs 02
server model of R-720 waits for above 2hrs power saves.
7.4 Pipe wrench 12" pcs 20
7.5 Pipe wrench 10" Pump pcs 20
7.6 Pipe wrench 14" house pcs 20
7.7 Pipe wrench 18" pcs 15
7.8 Pipe wrench 24" pcs 10
7.9 Pipe wrench 36" pcs 10
8.0 Pipe wrench 48" pcs 10
8.1 GI Pipe thread extractor 1"- 2 ½ ". pcs 04
8.2 GI Pipe thread extractor 2"- 4 ". pcs 3
8.3 Chain blocks 5 tones with belt. pcs 03
8.4 Chain blocks 10 tones with belt. pcs 03
8.5 Dice for Pipes thread extractor 1/2"- 4 ". set 04
8.6 Vice (Morsa) for Pipes 1/2"- 4 " with chain. set 04
8.7 Flera complete box 2"- 1/2" set 04
8.8 GI Welding Machine with Generator set from 2"-10" pipe set 02
8.9 HDPE Butt welding machines up to 315mm2 including Generator set & set 02
its accessary.
9.0 Grinder machine pcs 02
9.1 Flanged Check valve DN 125, PN- 40 With gaskets, individual bolts & Used in pcs 04
nuts. pump
9.2 Pressure gauge PN 40 bar house pcs 01
9.3 Flanged water meter DN 150mm ,PN 25 With gaskets, bolts & nuts. Used for pcs 04
Baska
9.4 Floating Valve DN-25 with its necessary. Used for set 01
pump
house
9.5 Floating Valve DN-300 with its necessary. Used main set 03
9.6 Flanged water meter DN350mm with gasket, bolt and nut. line set 02
10. PVC Ball Valve or Gate valve plastic 3/4" with it’s necessary accessary. Used in the
0 chlorinatio set 10
n room.
11. Flanged water meter with gasket, bolt & nut, DN -150,PN-16 pcs 06
12. Flanged Check valve with gasket, bolt & nut, DN 125,PN 40 pcs 06
13. Flanged Check valve with gasket, bolt & nut, DN 80, PN 16. pcs 06
14. Pressure gauge 0 - 40 bar pcs 05
15. Dismantling Joint with gasket, bolt & nut, Treatment pcs 10
DN 150, PN 16. plant
16. Dis mantling Joint with gasket, bolt & nut, DN 100, PN 16. pcs 10
17. Flanged water meter DN 200, PN 16 with gasket, bolt and nut. pcs 05
18. Mechanical seal for vertical surface pump model of A96122033P10726 pcs 05
& with serial number of 0001.
19. Double flanged reducer with bolt & nut. 400 mm2-350mm2 pcs 05
20. Gs Heavy duty Borehole Pipe 2 1/2". Tsaeda Meter. 86
21. Change over switch75 or 80A kalay pcs 01
22. Flanged water meter with gasket, bolt & nut, DN - 100, PN-16. Distributio pcs 06
23. Pressure gauge 0 - 40 bar. n system. pcs 05

13
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

24. Air release valve with gasket, bolt & nut DN 200, Pn 16, 1/2". pcs 05
25. Mechanical seal for vertical surface pump model of A96122033P10726 pcs 05
& with serial number of 0001.
26. Double flanged reducer with gasket, bolt & nut. 400 mm2-350mm2 pcs 05
27. Change over switch 32A or 40A. Edaga Set. 01
28. GI Heavy duty Borehole Pipe 2". meter 86
29 GI Pipe Thread extractor 1/2" - 2" set 02
30 GI Pipe Thread extractor 2"- 4" set 02
31 GI Pipe Thread extractor 3"- 6" set 02
32 ---KW 400/230V arc Welding Machine (which can be weld up to 8” set 01
heavy duty GI pipe.) with its accessary.
33 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
34 HDPE welding machine from 65-160mm) with all accessories. set 01
35 HDPE welding machine from 90-315mm) with all accessories. set 01
36 Large Electro-mechanical maintenance toolkit (Electrical & Needs for set 01
Mechanical). maintenanc
37 Medium Electro-mechanical maintenance toolkit (Electrical & e set 01
Mechanical). At the
38 Small Electrical maintenance toolkit. treatment set 01
plant.
Total sub cost…

BOQ - 4 - Different fittigs for Adiyet - Edaga Berhe town water supply.
S.No Description
1 Supply of Different fittings for Edaga Berhe town water supply. Unit Qty. Unit price Total price
1.1 Gate valve threaded ¾". pcs 06
1.2 Flanged Water meter 2", Dn 50mm with gasket, bolt & nut. Pcs 01
1.3 Flanged Water meter 4", Dn 100mm with gasket, bolt & nut. pcs 01
1.4 Flanged Check valve 4", Dn-1000mm with gasket, bolt & nut. pcs 01
1.5 Gate valve threaded 2", Dn 50mm with gasket, bolt & nut. Pcs 02
1.6 Gi Nipples 2" Pcs 06
1.7 Bolt & nut number-24 Pcs 06
1.8 Facet 3/4" Pcs 06
1.9 Gi Elbow 2" Pcs 05
2.0 Gi Coupler 2" Pcs 06
2.1 Gi Tee 1" Pcs 03
2.2 Gi Tee 2" pcs 02
2.3 Fuel filter – Lovel –T64102003 Pcs 02
2.4 Oil Filter Lovel –T64101001 Pcs 02
2.5 Generator Battery 12V/120A. pcs 01
2.6 Gi pipe medium class with coupler2". Meter 24
2.7 Gi pipe medium class with coupler 1". Meter 24
2.8 Gi pipe medium class with coupler 3/4". Meter 24
2.9 Level Control relay coil voltage 220V. pcs 01
3.0 Over load relay 32A. Pcs 01
3.1 Timer coil voltage 220v. pcs 01
3.2 GI Pipe thread extractor 1/2" - 2" set 02

14
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

3.3 GI Pipe thread extractor 2"- 4" set 02


3.4 GI Pipe thread extractor 3"- 6" set 02
3.5 GI Welding Machine 1" to 8" with compatible welding Generator set set 01
& its accessary.
3.6 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
3.7 HDPE welding machine from 65-160mm) with all accessories. set 01
3.8 HDPE welding machine from 90-315mm) with all. set 01
3.9 Large Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).
4.0 Medium Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).
Total sub cost…

BOQ-5- For Three phases Electrical Submersible Pump of Adwa-Gendepta & Yeha water Utility.
S.No Description
1. Supply Electrical submersible pump Specific Unit Qty. Unit Total
site price Price
1.1 Supply of three phase electrical Submersible pump with
Q=9m3/hr @H=158m with pump Power of 7.5 k.w. The
pump should be work at its maximum efficiency point
according to the specification with all necessary accessories
such as:-
 Electrical Power cable length should be 150m (if the
pump motor connection is star delta starting system, the
power cable should be double of the given length).
 Control panel, one set based on the motor starting
system.
Spare parts of control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs. Bruh Set 01
 Surge arrester one pcs. Tesfa/
 Over load relay one pcs. May
 Level controls relay one pcs. Tshat
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Two pair of 2 1/2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump
motor connection is star delta starting system, the
Volcanizing kit will be double.
 Casing diameter 6''.
1.2 Change over switch 690v/32A. pcs 01
1.3 Gs Heavy duty riser pipe 2 1/2" meter 84
1.4 Flanged water meter 2 1/2" pcs 02
1.5 Flanged check valve 2 1/2" pcs 02

15
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

1.6 GI Pipe thread extractor 1/2" - 2" For set 02


1.7 GI Pipe thread extractor 2"- 4" mainte4na set 02
1.8 GI Pipe thread extractor 3"- 6" nce to set 02
Gendepta
1.9 ---kw 400/230V Arc welding Machine(with can weld up to 8" water set 01
heavy duty GI pipe) with its accessary. committe
2.0 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
2.1 HDPE welding machine from 65-160mm) with all accessories. set 01
2.2 HDPE welding machine from 90-315mm) with all accessories. set 01
2.3 Medium Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).
2.4 Small Electrical maintenance toolkit. set 01
Total sub cost…
3.0 Supply of three phase electrical Submersible pump with
Q=17m3/hr @H=158m with pump Power of 11 k.w.The pump
should be work at its maximum efficiency point according to the
specification with all necessary accessories such as:- Yeha
 Electrical Power cable length should be 150m (if the pump Maykodo set 01
motor connection is star delta starting system, the power
cable should be double of the given length).
 Control panel, one set based on the motor starting system.
Spare parts of control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Over load relay one pcs.
 Surge arrester one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 2 1/2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump
motor connection is star delta starting system, the
Volcanizing kit will be double.
Casing diameter 6''.
3.1 Change over switch 690v/63A. Pcs 01
3.2 Gs Heavy duty riser pipe 2 1/2" mete 90
r
3.3 Flanged water meter 2 1/2" pcs 02
3.4 GI Pipe thread extractor 1/2" - 2" For set 02
maintenan
3.5 GI Pipe thread extractor 2"- 4" set 02
ce to yeha
3.6 GI Pipe thread extractor 3"- 6" water set 02
committe
3.7 ---KW 400/230V arc Welding Machine (which can be weld up set 01
e.
to 8” heavy duty GI pipe.) with its accessary.

16
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

3.8 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
2
3.9 HDPE welding machine from 65-160mm with all accessories. set 01
2
4.0 HDPE welding machine from 90- 315mm with all accessories. set 01
4.1 Medium Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).
4.2 Small Electrical maintenance toolkit. set 01
Total Sub Cost…..

BOQ-6- For Three phases Electrical Submersible Pump of Naeder-Teregey water Utility.
S.No Description
1. Supply Electrical submersible pump Specific Qty. Unit Rem
site Uni price ark
t
1.1 Supply of three phase electrical Submersible pump with
Q =29m3/hr@H=190m with pump Power of 22 k.w. The pump
should be work at its maximum efficiency point according to the
specification with all necessary accessories such as:-
 Electrical Power cable length should be 150 meter (if the pump
motor connection is star delta starting system, the power cable
should be double of the given length).
 Control panel, one set based on the motor starting system.
Spare parts of control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs. Teregey Set 01
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 3'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will
be double.
 Casing diameter 8''.
1.2 Supply Multistage three Phase Electrical In-line or End suction (side
suction and top discharge) multistage, Vertical surface centrifugal
pump including suction and delivery ports including their bolt, nut and
gaskets with Q=29m3/hr@ H=125m with pump Power of 15k.w.The
pump should be work at its maximum efficiency point according to the
specification with all necessary accessories such as:-
 The total electrical Power cable length of the pumps should be
100m and the Cable cross-sectional area should be computable to Collection
the pump k.w (if the pump motor connection is star delta starting chamber Set 02

17
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

system, the power cable should be double of the given length).


 Control panel, one set for each pump based on the motor starting
system.
Spare parts of control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 200m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 3'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will
be double i.e., for one pump.
1.3 Supply Engine driven three phase generator set compatible to the Teregey set 01
surface pump of Q=29m3/hr@ H=125m. I.e. with (2.5-3% *pump
k.w).
1.4 Three Phase Diesel Driven Generator set 80kva. set 01
1.5 Change over switch 690v/100A. Pcs 01
1.6 GI Pipe thread extractor 1/2" - 2" For set 02
1.7 GI Pipe thread extractor 2"- 4" maintenanc set 02
1.8 GI Pipe thread extractor 3"- 6" e to teregey set 02
1.9 ----KW 400/230V Arc Welding Machine(that can be weld up to 8" water set 01
heavy duty GI pipe) with its accessary. committee.
2.0 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
2.1 HDPE welding machine from 65 -160 mm2with all accessories. set 01
2.2 HDPE welding machine from 90 mm-315m m2) with all accessories. set 01
2.3 Medium Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).
2.4 Small Electrical maintenance toolkit. set 01
Total Sub Cost…..

BOQ-7- For Three phases Electrical Submersible Pump of Gerhusrnay & Erdi-jeganu water
Utility.
S/r Description
1. Supply Electrical submersible pump Specific Unit Qty. Unit Total
Site. price price
1.1 Supply Vertical Multi Stage end suction (side suction and top
discharge) Surface Pump With Q=36m3/hr@ H=235m with pump
Power of 90 k.w.The Pump should work at its Maximum efficiency
point according to the specification with all necessary accessories such
as:-
 Total Electrical power cable 100m length & Compatible to

18
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Motors Power size.


 Control panel one set based on the motor starting system.
Spare parts for one control panel.
 Phase sequence relays one pcs.
 Timer relay one pcs. Gerhu- Set 02
 Surge arrester one pcs. srnay
 Over load relay one pcs. Pump
 Level controls relay one pcs. House
 Delta/main contactor one pcs.
 Electrode cable 1.5mm2*200m length.
 Electrode sensor 02 piece.
 Volcanizing kit, 2 set for star delta starting system for each
pump.
 Two piece of flanged plate and heavy duty pipe with 3 meter
length, the same size with out-let Pump & 90° flanged elbows
for the out-let Pump.
 Two piece flanged plate and heavy duty pipe with 3 meter length,
the same size of with inlet let pump & 90° flanged elbows for the
inlet let Pump.
 For all fittings rubber gasket, bolts & nuts will be consider.
 Both Pumps & the driver shall be mounted or fix on Common
fabricated steel bed plate (base plate) with bolts and nuts.
 Anchor bolts or foundation bolts with their nuts should be supply
and with stand the pump and driver inertia torque during starting
and stopping.
 Eccentric and Concentric reducer compatible to the pump inlet &
outlet.
 40 bar pressure gauge one piece
All fittings and pipes should be PN 25.
2.6 Large Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).
2.7 Medium Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical). Used for
2.8 Small Electrical maintenance toolkit. maintenanc set 01
2.9 GI Pipe thread extractor 1/2" - 2" e set 02
3.0 GI Pipe thread extractor 2"- 4" To Gerhu- set 02
srnay water
3.1 GI Pipe thread extractor 3"- 6" set 02
supply
3.2 ---KW 400/230V Welding Machine (that can be weld up to 8" heavy set 01
office.
duty GI pipe) with its accessary.
3.3 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
3.4 HDPE welding machine from 65-160mm2 with all accessories. set 01
3.5 HDPE butt welding Hydraulic machine from 90-315 mm2 with all set 01
accessories & compatible welding generator set.
Total Sub Cost…..

19
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

1.2 Supply of three phase electrical Submersible pump with


Q=8m3/hr @H=158 with pump Power of 4 k.w.The pump should be
work at its maximum efficiency point according to the specification
with all necessary accessories such as:-
 Electrical Power cable length should be 150m (if the pump motor
connection is star delta starting system, the power cable should
be double of the given length).
 Control panel, one set based on the motor starting system. Erdi- Set 01
Spare parts of control panel elements Jeganu
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will
be double.
 Casing diameter 6''.
1.3 Three Phase Diesel Driven Generator set 30kva, Normal or salient Gen Set 01
set.
1.4 Change over switch 690v/63A. Pcs 01
1.5 Medium Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).
1.6 Small Electrical maintenance toolkit. Used for set 01
1.7 GI Pipe thread extractor 1/2" - 4" maintenanc set 02
1.8 GI Pipe thread extractor 3"- 6" e set 02
1.9 ---KW 400/230V arc Welding Machine (which can be weld up to 8” Erdi- set 01
heavy duty GI pipe.) with its accessary. Jeganu
2.0 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). water pcs 08
2.1 2
HDPE welding machine from 65-160 mm with all accessories. committee. set 01
2.2 HDPE welding machine from 90 -315 mm2 with all accessories. set 01
Total Sub Cost…..

20
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

BOQ-8- For Three phases Electrical Submersible Pump of Nebelet water Supply Office.
s/r Description
1. Supply Electrical submersible pump Specific Site. Unit Unit price Total Price.
Qty.
1.1 Supply of three phase electrical Submersible pump
with Q=17m3/hr @H=181m with pump Power of
18.5/15 k.w.The pump should be work at its
maximum efficiency point according to the
specification with all necessary accessories such as:-
 Electrical Power cable length should be 150m (if
the pump motor connection is star delta starting
system, the power cable should be double of the
given length).
 Control panel, one set including based on the
motor starting system.
Spare parts of control panel element.
 Phase sequence relays one pcs.
 Surge arrester one pcs. Chihmit Set 01
 Timer relay one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 3''pipe clamp
 Cable clips, per 3m length of the total power
cable length according to specification.
 Volcanizing kit, 1 set for star connection & if the
pump motor connection is star delta starting
system, the Volcanizing kit will be double.
 Casing diameter 8''.
1.2 Supply of three phase electrical Submersible pump
with Q=18m3/hr @H=220m with pump Power of
18.5/22 k.w. The pump should be work at its
maximum efficiency point according to the
specification with all necessary accessories such as:-
 Electrical Power cable length should be 120m (if
the pump motor connection is star delta starting
system, the power cable should be double of the
given length).
 Control panel, one set based on the motor
starting system. Collection Set 01
Spare parts of control panel elements. chamber
 Phase sequence relays one pcs.
 Timer relay one pcs.

21
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

 Surge arrester one pcs.


 Over load relay one pcs.
 Level controls relay one pcs.
 Star contactor one pcs.
 Electrode cable, 240m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Volcanizing kit, 1 set for star connection & if the
pump motor connection is star delta starting
system, the Volcanizing kit will be double.
1.3 Gs heavy duty Borehole riser pipe 3". Chihmit meter 86
1.4 Large Electro-mechanical maintenance toolkit For nebelet set 01
(Electrical & Mechanical). water supply
1.5 Medium Electro-mechanical maintenance toolkit office & Used set 01
(Electrical & Mechanical). for
1.6 Small Electrical maintenance toolkit. maintenance. set 01
1.7 GI Pipe thread extractor 1/2" - 4" set 01
1.8 GI Pipe thread extractor 3"- 6" set 01
1.9 ---KW 400/230V arc Welding Machine (which can be set 01
weld up to 8" heavy duty GI pipe.) with its accessary.
2.0 GI Pipe wrench 18", 24", 36", and 48", (Two for each pcs 08
size).
2.1 HDPE welding machine from 65-160mm2 with all set 01
accessories. .
2.2 HDPE welding machine from 90 -315 mm2 with all set 01
accessories. .
Total Sub Cost…..

BOQ-9- For Three phases Electrical Submersible Pump of Feresmay water Supply Office.
s/r Description
1 Supply Electrical submersible pump Specific Unit Qty. Unit price Total Price
Site.
1.1 Supply of three phase electrical Submersible pump with
Q=9.6m3/hr @H=158m with pump Power of 7.5 k.w.The pump
should be work at its maximum efficiency point according to the
specification with all necessary accessories such as:-
 Electrical Power cable150m (if the pump motor connection is
star delta starting system, the power cable should be double of
the given length).
 Control panel, one set based on the motor starting system.
Spare parts of control panel elements.
 Phase sequence relays one pcs.
 Timers relay one pcs. May- Set 01
 Surge arrester one pcs. meret
 Over load relay one pcs. /Berakit
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor,2 pieces

22
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

 40 bar pressure gauge, one piece


 panel, length should be Two pair of 2 1/2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit
will be double.
 Casing diameter 6''.
1.2 Supply of three phase electrical Submersible pump With Q=7m3/hr
@H=173m with pump Power of 5.5 k.w. The pump should be
work at its maximum efficiency point according to the specification
with all necessary accessories such as:-
 Electrical Power cable length should be 150m (if the pump
motor connection is star delta starting system, the power cable
should be double of the given length).
 Control panel, one set including based on the motor starting
system.
Spare parts of control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs. Adiwer/ Set 01
 Surge arrester one pcs. Beri
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification Volcanizing kit, 1 set for star
connection& if the pump motor connection is star delta
starting system, the Volcanizing kit will be double.
 Casing diameter 6''.
1.3 Supply of three phase electrical Submersible pump with Q=6m3/hr
. @H=120m with pump Power of 4.0 k.w.The pump should be
work at its maximum efficiency point according to the specification
with all necessary accessories such as:-
 Electrical Power cable length should be 150m (if the pump
motor connection is star delta starting system, the power cable
should be double of the given length).
 Control panel, one set based on the motor starting system.
Spare parts of control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs. Adiwer/ Set 01
 Surge arrester one pcs. Quiha
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces

23
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

 60 bar pressure gauge, one piece


 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit
will be double.
 Casing diameter 6''
1.4 Large Electro-mechanical maintenance toolkit (Electrical & for set 01
Mechanical). Feresmay
1.5 Medium Electro-mechanical maintenance toolkit (Electrical & water set 01
Mechanical). supply
1.6 Small Electrical maintenance toolkit. office & set 01
1.7 GI Pipe Thread extractor 1/2" - 4" Used for set 01
1.8 GI Pipe Thread extractor 3"- 6" maintenan set 01
1.9 ---KW 400/230V arc Welding Machine (which can be weld up to 8” ce. set 01
heavy duty GI pipe.) with its accessary.
2.0 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
2.1 HDPE welding machine from 65-160mm2 with all accessories. set 01
2.2 HDPE welding machine from 90 -315 mm2 with all accessories set 01
Total Sub Cost…..

24
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

BOQ-10- For Three phases Electrical Submersible Pump of Ahsia -Town Merhisenay water Supply
Office.
S/r Description
1. Supply Electrical submersible pump Specific site Uni Qt Unit Total
t y. price price
1.1 Supply of three phase electrical Submersible pump with Q=10.8m3/hr
@H=135m with pump Power of 5.5 k.w.The pump should be work at
its maximum efficiency point according to the specification with all
necessary accessories such as:-
 Electrical Power cable length should be 120m (if the pump motor
connection is star delta starting system, the power cable should be
double of the given length).
 Control panel, one set based on the motor starting system. Maichgono set 01
Spare parts of control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 240m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set GT-1 for star connection & if the pump
 Motor connection is star delta starting system; the Volcanizing kit
will be double.
 Casing diameter 5''.
1.2 Gs heavy duty Borehole riser pipe 2". Borehole-1 met 76
er
1.3 Medium Electro-mechanical maintenance toolkit (Electrical & For set 01
Mechanical). Ahsiawater
1.4 Small Electrical maintenance toolkit. supply office set 01
1.5 GI Pipe Thread extractor 1/2" - 4" & Used for set 01
1.6 GI Pipe Thread extractor 3"- 6" maintenance. set 01
1.7 ---KW 400/230V arc Welding Machine (which can be weld up to 8” set 01
heavy duty GI pipe.) with its accessary.
1.8 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
1.9 HDPE welding machine from 65-160mm2 with all accessories. set 01
Total Sub Cost…..

25
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

BOQ-11- For Three phases Electrical Submersible Pump of Adwa - Rahya water Utility.
S/r Description
1. Supply Electrical submersible pump Specific site Unit Qty. Unit Total
price price
1.1 Supply of three phase electrical Submersible pump with Q=11m3/hr
@H=243m with pump Power of 13 k.w.The pump should be work
at its maximum efficiency point according to the specification with
all necessary accessories such as:-
 Electrical Power cable length should be 150m (if the pump
motor connection is star delta starting system, the power cable
should be double of the given length).
 Control panel, one set based on the motor starting system.
Spare parts of control panel elements. May-cherbai Set 01
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump
 Motor connection is star delta starting system; the Volcanizing
kit will be double. Casing diameter 6''.
1.2 Medium Electro-mechanical maintenance toolkit (Electrical & for Rahya set 01
Mechanical). water supply
1.3 Small Electrical maintenance toolkit. office & set 01
1.4 GI Pipe Thread extractor 1/2" - 4" Used for set 01
1.5 GI Pipe Thread extractor 3"- 6" maintenance. set 01
1.6 ---KW 400/230V arc Welding Machine (which can be weld up to 8” set 01
heavy duty GI pipe.) with its accessary.
1.7 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
1.8 HDPE welding machine from 65-160mm2 with all accessories. set 01
Total Sub Cost…..

26
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

BOQ-12- For Three phases Electrical Submersible Pump of May-Kinetal water Supply Office.
S/r Description
1 Supply Electrical submersible pump Specific Site Unit Qty. Unit price Total Price
1.1 Supply of three phase electrical Submersible pump with
Q=33m3/hr.@H=172m & Power of 22/26 k.w.The
pump should be work at its maximum efficiency point
according to the specification with all necessary
accessories such as:-
 Electrical Power cable length should be 100m (if
the pump motor connection is star delta starting
system, the power cable should be double of the
given length).
 Control panel, one set based on the motor starting
system.
Spare parts of control panel elements. Borehole -1 Set 01
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 200m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Two pair of 4'' pipe clamp
 Cable clips, per 3m length of the total power cable
length according to specification.
 Volcanizing kit, 1 set for star connection & if the
pump motor connection is star delta starting system,
the Volcanizing kit will be double.
 Casing diameter 8''.
2.0 GI Pipe Thread extractor 1/2" - 2" set 02
2.1 GI Pipe Thread extractor 2"- 4" set 02
2.2 GI Pipe Thread extractor 3"- 6" set 02
2.3 ---KW 400/230V arc Welding Machine (which can be For set 01
weld up to 8” heavy duty GI pipe.) with its accessary. maintenance
2.4 GI Pipe wrench 18", 24", 36", and 48", (Two for each to May pcs 08
size). kinetal water
2.5 HDPE welding machine from 65-160mm2 with all water Supply. set 01
accessories
2.6 HDPE welding machine from 90-315mm2 with all set 01
accessories.
2.7 Medium Electro-mechanical maintenance toolkit set 01
(Electrical & Mechanical).
2.8 Small Electrical maintenance toolkit. set 01
Total Sub Cost…..

BOQ-13- For Three phases Electrical Submersible Pump of Adiet –Semema town & Edagaselus

27
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

water Supply Office.


S.n Description
1. Supply Electrical submersible pump Specific Site Unit Qt Unit Total Price
y. price
1.1 Supply of three phase electrical Submersible pump with Q
=17m3/hr @ H=271m with pump Power of 18.5 k.w.The
pump should be work at its maximum efficiency point according
to the specification with all necessary accessories such as:-
 Electrical Power cable length should be 150m (if the pump
motor connection is star delta starting system, the power Semema Set 01
cable should be double of the given length). (collection
 Control panel, one set based on the motor starting system. chamber.)
Spare parts of control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
Delta/main contactor one pcs.
 Electrode cable, 200m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 2 1/2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump
motor connection is star delta starting system, the
Volcanizing kit will be double.
 Casing diameter 6''.
1.2 Supply three phase Diesel driven generator set 30kva. Edaga set 01
selus
1.3 Supply three phase submersible pump motor portion 7.5 k.w. pcs 01
1.4 Supply of three phase electrical Submersible pump with Q
=18m3/hr @H=206m with pump Power of 22 k.w.The pump
should be work at its maximum efficiency point according to the
specification with all necessary accessories such as:-
 Electrical Power cable length should be 150m (if the pump
motor connection is star delta starting system, the power
cable should be double of the given length). Semema
 Control panel, one set based on the motor starting system. (Borehole). Set 01
Spare parts of control panel elements
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece

28
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

 Two pair of 2 1/2'' pipe clamp


 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump
motor connection is star delta starting system, the
Volcanizing kit will be double.
 Casing diameter 6''.
1.3 GI Pipe Thread extractor 1/2" - 2" For set 02
maintenance
1.4 GI Pipe Thread extractor 2"- 4" to semema set 02
1.5 GI Pipe Thread extractor 3"- 6" water water set 02
Supply.
1.6 ---KW 400/230V arc Welding Machine (which can be weld up set 01
to 8” heavy duty GI pipe.) with its accessary.
1.7 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
1.7 --HDPE welding machine from 65-160mm2 with all accessories set 01
1.8 HDPE welding machine from 90 mm-315mm2 with all set 01
accessories.
1.9 Medium Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).
2.0 Small Electrical maintenance toolkit. set 01
Total Sub Cost…..

BOQ -14 -Three phases Electrical Submersible Pump for Naeder-Mahbere -Deigo Town water
Supply Office.
S/r Description Specific Unit Qty. Unit price Total Cost
site
1. Supply of three phase electrical Submersible
pump with Q=16m3/hr @H=155m with
pump Power of 11 k.w.The pump should be
work at its maximum efficiency point
according to the specification with all
necessary accessories such as:-
 Electrical Power cable length should be
150m (if the pump motor connection is
star delta starting system, the power
cable should be double of the given
length). Maikorida set 01
 Control panel, one set based on the
motor starting system.
Spare parts of control panel elements
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.

29
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

 Electrode cable, 300m (1.5mm2).


 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 2 1/2'' pipe clamp
 Cable clips, per 3m length of the total
power cable length according to
specification.
 Volcanizing kit, 1 set GT-4 for star
connection & if the pump motor
connection is star delta starting system,
the Volcanizing kit will be double.
Casing diameter 8''.
2. Level Control relay coil voltage 24V. pcs 01
3. Check valve threaded 2 ½" pcs 01
4. Over load 32A 01
5 GI Pipe Thread extractor 1/2" - 2" For set 02
6 GI Pipe Thread extractor 2"- 4" maintenan set 02
7 GI Pipe Thread extractor 3"- 6" ce to set 02
8 ---KW 400/230V arc Welding Machine Mahbere - set 01
(which can be weld up to 8” heavy duty GI deigo
pipe.) with its accessary. water
9 GI Pipe wrench 18", 24", 36", and 48", (Two Supply. pcs 08
for each size).
10 HDPE welding machine from 65- 160mm2 set 01
with all accessories.
11 HDPE elding machine from 90 mm-315m m2 set 01
with all accessories.
12 Medium Electro-mechanical maintenance set 01
toolkit (Electrical & Mechanical).
13 Small Electrical maintenance toolkit. set 01
Total Sub Cost…..

BOQ -15 -Three phases Electrical Submersible Pump for Ahferom-Dibdbo town water supply
Office.
S/r Description Specific site Unit Qty. Unit Total price
price
1. Supply of three phase electrical Submersible pump with
Q = 7.2m3/hr @H=158m with pump Power of 5.5/7.5
k.w.The pump should be work at its maximum efficiency
point according to the specification with all necessary Dibdbo Set 01
accessories such as:- BH-1
 Electrical Power cable length should be 150m (if the
pump motor connection is star delta starting system,
the power cable should be double of the given length).
 Control panel, one set based on the motor starting
system.
Spare parts of control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs.

30
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

 Over load relay one pcs.


 Surge arrester one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable
length according to specification.
 Volcanizing kit, 1 set for star connection & if the pump
motor connection is star delta starting system, the
Volcanizing kit will be double.
 Casing diameter 6''.
1.1 Supply three phase electrical submersible pump Motor pcs 01
portion 9.2 k.w.
1.2 Level Control relay coil voltage 24V.,LVM-25 pcs 02
1.3 Over load relay 17-24A pcs 01
1.5 Over load relay 9-15A pcs 01
1.6 Over load relay 32A pcs 01
2 Three phase Electrical submersible pump Motor portion 9 pcs 01
k.w Enticho
2.1 Three phase Electrical submersible pump Motor portion 7.5 Water pcs 01
k.w supply
2.2 Supply of three phase electrical Submersible pump with
Q=11m3/hr@H=175m with Power of 11 k.w.The pump
should be work at its maximum efficiency point according to
the specification with all necessary accessories such as:-
 Electrical Power cable length should be 150m (if the Enticho
pump motor connection is star delta starting system, Town Set 01
the power cable should be double of the given length). Borl 1
 Control panel, one set based on the motor starting
system.
Spare parts of control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 2 1/2'' pipe clamp
 Cable clips, per 3m length of the total power cable
length according to specification.
 Volcanizing kit, 1 set for star connection & if the pump
motor connection is star delta starting system, the
Volcanizing kit will be double.
 Casing diameter 6''.

31
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

2.3 Supply of three phase electrical Submersible pump with Used for
Q=21m3/hr @H=260m & Power of 26k.w.The pump Enticho
should be work at its maximum efficiency point according to Town -
the specification with all necessary accessories such as:- T/mgaria
 Electrical Power cable length should be 150m (if the tsemri set 01
pump motor connection is star delta starting system, Mlhats
the power cable should be double of the given length). Asmael
 Control panel, one set based on the motor starting
system.
Spare parts of control panel.
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 2 1/2'' pipe clamp
 Cable clips, per 3m length of the total power cable
length according to specification.
 Volcanizing kit, 1 set for star connection & if the pump
motor connection is star delta starting system, the
Volcanizing kit will be double.
 Casing diameter 6''.
2.4 Supply of three phase electrical Submersible pump with
Q=9m3/hr @H=158m with pump Power of 7.5 k.w.The
pump should be work at its maximum efficiency point
according to the specification with all necessary accessories Enticho
such as:- Town Set 01
 Electrical Power cable length should be 150m (if the BH-2
pump motor connection is star delta starting system,
the power cable should be double of the given length).
 Control panel, one set based on the motor starting
system.
Spare parts of control panel elements.
Phase sequence relays one pcs.
Timer relay one pcs.
Surge arrester one pcs.
Over load relay one pcs.
Level controls relay one pcs.
Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 2 1/2'' pipe clamp
 Cable clips, per 3m length of the total power cable
length according to specification.
 Volcanizing kit, 1 set for star connection & if the pump

32
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

motor connection is star delta starting system, the


Volcanizing kit will be double.
 Casing diameter 6''.
2.5 Supply of three phase electrical Submersible pump with
Q=13.3m3/hr @H=190m with pump Power of 11 k.w.The
pump should be work at its maximum efficiency point
according to the specification with all necessary accessories
such as:- May-Sru Set 01
 Electrical Power cable length should be 150m (if the
pump motor connection is star delta starting system,
the power cable should be double of the given length).
 Control panel, one set based on the motor starting
system.
Spare parts of control panel.
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 2 1/2'' pipe clamp
 Cable clips, per 3m length of the total power cable
length according to specification.
 Volcanizing kit, 1 set for star connection & if the pump
motor connection is star delta starting system, the
Volcanizing kit will be double.
 Casing diameter 6''.
GI Pipe Thread extractor 1/2" - 2" Used For set 02
2.6 maintenanc
2.7 GI Pipe Thread extractor 2"- 4" e to Enticho set 02
2.8 GI Pipe Thread extractor 3"- 6" water set 02
2.9 ---KW 400/230V arc Welding Machine (which can be weld Supply. set 01
up to 8” heavy duty GI pipe.) with its accessary.
3.0 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
3.1 HDPE welding machine from 65- 160 mm2with all set 01
accessories.
3.2 HDPE welding machine from 90mm-315m m2) with all set 01
accessories.
3.3 Medium Electro-mechanical maintenance toolkit (Electrical set 01
& Mechanical).
3.4 Small Electrical maintenance toolkit. set 01
Total Sub Cost……

33
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

BOQ -16 - Three phases Electrical Submersible Pump for Wereda Adi-Arbaete, Smret town water supply
Office.
S/r Description Specific site Unit Qty. Unit Total price
price
1. Supply of three phase electrical Submersible pump with
Q=7.2m3/hr @ H=120m with pump power of 5.5 k.w. The
pump should be work at its maximum efficiency point
according to the specification with all necessary accessories Smret-
such as:- ketema & Set 01
 Electrical Power cable length should be 150m (if the used for
pump motor connection is star delta starting system, smre4t town
the power cable should be double of the given length).
 Control panel, one set based on the motor starting
system.
Spare parts of control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 60 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable
length according to specification.
 Volcanizing kit, 1 set for star connection & if the pump
motor connection is star delta starting system, the
Volcanizing kit will be double.
 Casing diameter 6''.
1.1 Gs heavy duty Borehole riser pipe 2". meter 84
1.2 Medium Main riser pipe 2 1/2". meter 96
1.3 Medium Main riser pipe 2". meter 72
1.4 Flanged water meter 2 1/2" pcs 02
1.5 Flanged check valve 2 1/2" pcs 02
1.6 GI Elbow 40mm or 1 1/2". pcs 12
1.7 GI Coupler 40mm or 1 1/2". pcs 15
1.8 GI Union 2 1/2". pcs 10
1.9 GI Elbow 50mm or 2". pcs 10
2.0 ---KW 400/230V arc Welding Machine (which can be weld set 01
up to 8” heavy duty GI pipe.) with its accessary.
2.1 GI Pipe Thread extractor 3"- 6" set 02
2.2 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
2.3 HDPE welding machine from 65- 160mm2 with all set 01
accessories.
2.4 HDPE welding machine from 90 mm-315mm2 with all set 01
accessories.
2.5 Medium Electro-mechanical maintenance toolkit (Electrical set 01

34
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

& Mechanical).
2.6 Small Electrical maintenance toolkit. set 01
Total Sub Cost……

BOQ -17- Wereda Laelay Maychew,Tabya Modogo Solar pump


S/r Description
1 Supply Solar Pump System Controller with inverter. Specific Site Unit Qty. Unit Total
price price
Supply of solar pump controller. I.e. including Inverter unit.
1.1 With:-
 Maximum input/output current -14A. May-Ansti
 Maximum input voltage-375VDC. School Set 01
 Output 60-240VECPWM 3-Phase.
 Power 4kw.
 Enclosure IP 68/NEMA6P
Total Sub cost…

BOQ -18 - Three phases Electrical Submersible Pump for Wereda chila town water supply Office.

S/r Description Specific Unit Qty. Unit Total


site price price
1. Supply of three phase electrical Submersible pump with
Q=10.5m3/hr @ H=75m with pump Power of 5.5 k.w. The pump
should be work at its maximum efficiency point according to the
specification with all necessary accessories such as:-
 Electrical Power cable length should be 100m (if the pump motor
connection is star delta starting system, the power cable should
be double of the given length).
 Control panel one set compatible to the motor starting. Mai-ela set 01
Spare parts of Control panel elements.
 Phase sequence relays one pcs.
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Dela/main contactor one pcs.
 Electrode cable 1.5mm2*100m length for each pump.
 Electrode sensor 02 piece for each pump.
 Volcanizing kit, 2 set for star delta starting system for each
pump.
 Two paired of 2" pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Casing diameter 6"
1.1 Gs heavy duty Borehole pipe 2" Mai-ela- mete 48

35
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

BH1 r
2. Supply of three phase electrical Submersible pump with
Q=30m3/hr @H=130m with pump Power of 15 k.w. The pump
should be work at its maximum efficiency point according to the
specification with all necessary accessories such as:-
 Electrical Power cable length should be 150 meter (if the pump
motor connection is star delta starting system, the power cable Mai-ela- set 01
should be double of the given length). BH2
 Control panel, one set based on the motor starting system.
Spare parts of Control panel elements.
 Phase sequence relays one pcs.
 Timers relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable, 300m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will
be double.
 Casing diameter 6''.
2.1 Medium Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).
2.2 Small Electrical maintenance toolkit. set 01
For Chila
2.3 GI Pipe Thread extractor 1/2" - 2" set 02
water
2.4 GI Pipe Thread extractor 2"- 4" supply set 02
office to
2.5 GI Pipe Thread extractor 3"- 6" set 02
maintenanc
2.6 ---KW 400/230V arc Welding Machine (which can be weld up to 8” e. set 01
heavy duty GI pipe.) with its accessary.
2.7 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
2
2.8 HDPE welding machine from 65- 160 mm with all accessories. set 01
2.9 HDPE welding machine from 90mm-315m m2 with all accessories. set 01
Total Sub Cost…..

36
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

BOQ -19- Part-A. Three phase Electrical Horizontal & Vertical Surface Pumps for Axum Water
Supply Office.
1. Supply of Electrical Driven Horizontal Multistage Surface pumps. Specific Unit Qty. Unit Total
site price price
1.1 Supply Vertical Multi Stage end suction Surface Pump With Q =
90m3/hr@ H=122.8m with pump Power of 45 k.w.The Pump should
work at its Maximum efficiency point according to the specification
with all necessary accessories such as:-
 Total Electrical power cable 120m length & Compatible to
Motors Power size.
 Control panel one set. Collection
. Spare parts of one Control panel. chamber
 Phase sequence relays one pcs. Sefeho. Set 02
 Timer relay one pcs.
 Surge arrester one pcs.
 Over load relay one pcs.
 Level controls relay one pcs.
 Delta/main contactor one pcs.
 Electrode cable 1.5mm2*150m length.
 Electrode sensor 02 piece.
 Volcanizing kit, 2 set for star delta starting system for each
pump.
 Three piece of flanged plate and heavy duty pipe with 2 meter
length, the same size with out-let Pump & 90° flanged elbows
for the out-let Pump.
 Three piece flanged plate and heavy duty pipe with 2 meter
length, the same size of with inlet let pump & 90° flanged elbows
for the inlet let Pump.
 For all fittings rubber gasket, bolts & nuts will be consider.
 Both Pumps & the driver shall be mounted or fix on Common
fabricated steel bed plate (base plate) with bolts and nuts.
 Anchor bolts or foundation bolts with their nuts should be supply
and with stand the pump and driver inertia torque during starting
and stopping.
 Eccentric and Concentric reducer based on the pump inlet &
outlet.
 40 bar pressure gauge one piece
 All fittings and pipes should be PN 25.
 Inlet suction side flanged DN 125/125mm
 Outlet Discharge side flanged-DN 100/114.3mm
1.2 Crane for loading & un loading the pump 01
1.3 Supply horizontal Multi Stage end suction Surface Pump With
Q=144m3/hr @ H=145m & Power of 90 k.w.The Pump should work
at its Maximum efficiency point according to the specification with all
necessary accessories such as:-
 Total Electrical power cable 120m length & Compatible to
Motors Power size.
 Control panel one set.
. Spare parts of one Control panel.
Phase sequence relays one pcs.

37
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Timer relay one pcs.


Surge arrester one pcs. At Adwa Set 02
treatment
Over load relay one pcs. plant Used
Level controls relay one pcs. for Axum
Delta/main contactor one pcs.
 Electrode cable 1.5mm2*150 m length.
 Electrode sensor 02 piece.
 Volcanizing kit, 2 set for star delta starting system for each
pump.
 Three piece of flanged plate and heavy duty pipe with 2 meter
length, the same size with out-let Pump & 90° flanged elbows
for the out-let Pump.
 Three piece flanged plate and heavy duty pipe with 2 meter
length, the same size of with inlet let pump & 90° flanged elbows
for the inlet let Pump.
 For all fittings rubber gasket, bolts & nuts will be consider.
 Both Pumps & the driver shall be mounted or fix on Common
fabricated steel bed plate (base plate) with bolts and nuts.
 Anchor bolts or foundation bolts with their nuts should be supply
and with stand the pump and driver inertia torque during starting
and stopping.
 Eccentric and Concentric reducer
 40 bar pressure gauge one piece
 All fittings and pipes should be PN 25.
 Inlet suction side flanged DN 125/125mm
 Outlet Discharge side flanged-DN 80/80 mm
1.4 Crane for loading & un loading the pump
1.5 Supply Horizontal Multi Stage end suction Surface Pump With
Q=155m3/hr @ H=150m & Power of 110 k.w.The Pump should work
at its Maximum efficiency point according to the specification with all
necessary accessories such as:-
 Total Electrical power cable 150m length & Compatible to
Motors Power size.
 Control panel one set.
. Spare parts of one Control panel.
Phase sequence relays one pcs.
Timer relay one pcs.
Surge arrester one pcs. Lakia Set 02

Over load relay one pcs.


Level controls relay one pcs.
Delta/main contactor one pcs.
 Electrode cable 1.5mm2*150m length.
 Electrode sensor 02 piece.
 Volcanizing kit, 2 set for star delta starting system for each
pump.
 Three piece of flanged plate and heavy duty pipe with 2 meter
length, the same size with out-let Pump & 90° flanged elbows
for the out-let Pump.

38
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

 Three piece flanged plate and heavy duty pipe with 2 meter
length, the same size of with inlet let pump & 90° flanged elbows
for the inlet let Pump.
 For all fittings rubber gasket, bolts & nuts will be consider.
 Both Pumps & the driver shall be mounted or fix on Common
fabricated steel bed plate (base plate) with bolts and nuts.
 Anchor bolts or foundation bolts with their nuts should be supply
and with stand the pump and driver inertia torque during starting
and stopping.
 Eccentric and Concentric reducer
 40 bar pressure gauge one piece
 All fittings and pipes should be PN 25.
 Inlet suction side flanged DN 80/80mm
 Outlet Discharge side flanged-DN 3 inch/76.10 mm
1.6 Crane for loading & un loading the pump
1.7 Supply Horizontal Multi Stage end suction Surface Pump With
Q=144m3/hr @ H=88m & Power of 55 k.w.The Pump should work at
its Maximum efficiency point according to the specification with all
necessary accessories such as:-
 Total Electrical power cable 120m length & Compatible to
Motors Power size.
 Control panel one set.
. Spare parts of one Control panel.
Phase sequence relays one pcs.
Timer relay one pcs.
Surge arrester one pcs. Endayesus Set 02

Over load relay one pcs.


Level controls relay one pcs.
Delta/main contactor one pcs.
 Electrode cable 1.5mm2*150m length.
 Electrode sensor 02 piece.
 Volcanizing kit, 2 set for star delta starting system for each
pump.
 Three piece of flanged plate and heavy duty pipe with 2 meter
length, the same size with out-let Pump & 90° flanged elbows
for the out-let Pump.
 Three piece flanged plate and heavy duty pipe with 2 meter
length, the same size of with inlet let pump & 90° flanged elbows
for the inlet let Pump.
 For all fittings rubber gasket, bolts & nuts will be consider.
 Both Pumps & the driver shall be mounted or fix on Common
fabricated steel bed plate (base plate) with bolts and nuts.
 Anchor bolts or foundation bolts with their nuts should be supply
and with stand the pump and driver inertia torque during starting
and stopping.
 Eccentric and Concentric reducer
 40 bar pressure gauge one piece
 All fittings and pipes should be PN 25.
 Inlet suction side flanged DN 80/80mm

39
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

 Outlet Discharge side flanged-DN 3 inch/76.10 mm


1.7 Crane for loading and un loading the pump
2. Supply of three phase electrical Submersible pump with
Q=21m3/hr @H=167m & Power of 15k.w.The pump should be work
at its maximum efficiency point according to the specification with all
necessary accessories such as:-
 Electrical Power cable length should be 150 meter (if the pump
motor connection is star delta starting system, the power cable Maiberk set 01
should be double of the given length).
 Control panel, one set based on the motor starting system.
Spare parts of Control panel.
Phase sequence relays one pcs.
Timer relay one pcs.
Surge arrester one pcs.

Over load relay one pcs.


Level controls relay one pcs.
Delta/main contactor one pcs.
 Electrode cable, 200m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Two pair of 2 1/2" pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will
be double.
 Casing diameter 6''.
3.1 Change over switch 690v/80A. Pcs 01
3.2 Gs Heavy duty borehole riser pipe 2 1/2". mete 96
r
4. Supply of three phase electrical Submersible pump with
Q=4.3m3/hr @H=96m & Power of 2.2k.w.The pump should be work
at its maximum efficiency point according to the specification with all
necessary accessories such as:-
 Electrical Power cable length should be 120 meter (if the pump
motor connection is star delta starting system, the power cable Semema/ set 01
should be double of the given length). hamed
 Control panel, one set based on the motor starting system. Gebez
Spare parts of Control panel.
Phase sequence relays one pcs.
Timer relay one pcs.
Surge arrester one pcs.

Over load relay one pcs.


Level controls relay one pcs.
Delta/ main contactor one pcs.
 Electrode cable, 200m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece

40
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

 Two pair of 2'' pipe clamp


 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will
be double.
Casing diameter 6''.
4.1 Change over switch 690v/32A. Pcs 01
4.2 Gs Heavy duty borehole riser pipe 2". mete 60
r
5 Supply of three phase electrical Submersible pump with
Q=5.4m3/hr @H=123m and power of 4.0 k.w.The pump should be
work at its maximum efficiency point according to the specification
with all necessary accessories such as:-
 Electrical Power cable length should be 150 meter (if the pump
motor connection is star delta starting system, the power cable Well nor-4 set 01
should be double of the given length).
 Control panel, one set based on the motor starting system.
Spare parts of Control panel.
Phase sequence relays one pcs.
Timer relay one pcs.
Surge arrester one pcs.

Over load relay one pcs.


Level controls relay one pcs.
Delta/main contactor one pcs.
 Electrode cable, 200m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will
be double.
 Casing Ø 8''.
5.1 Change over switch 690v/32A. Pcs 01
5.2 Gs Heavy duty borehole riser pipe 2". mete 66
r
6 Supply of three phase electrical Submersible pump with
Q=0.72m3/hr @H=112.3m & Power of 1.1k.w.The pump should be
work at its maximum efficiency point according to the specification
with all necessary accessories such as:-
 Electrical Power cable length should be 150 meter (if the pump
motor connection is star delta starting system, the power cable
should be double of the given length). Well nor-5 set 01
 Control panel, one set based on the motor starting system.
Spare parts of Control panel.
Phase sequence relays one pcs.
Timer relay one pcs.

41
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Surge arrester one pcs.

Over load relay one pcs.


Level controls relay one pcs.
Delta/main contactor one pcs.
 Electrode cable, 200m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will
be double.
 Casing diameter 6''.
6.1 Change over switch 690v/32A. Pcs 01
6.2 Gs Heavy duty borehole riser pipe 2". mete 72
r
6.3 Crane (for installation of pumps). 01
7 Supply of three phase electrical Submersible pump with
Q =4.3 m3/hr @H=125m & Power of 3k.w.The pump should be
work at its maximum efficiency point according to the specification
with all necessary accessories such as:-
 Electrical Power cable length should be 120 meter (if the pump
motor connection is star delta starting system, the power cable
should be double of the given length). Well nor-6 set 01
 Control panel, one set based on the motor starting system.
Spare parts of Control panel.
Phase sequence relays one pcs.
Timer relay one pcs.
Surge arrester one pcs.

Over load relay one pcs.


Level controls relay one pcs.
Delta/main contactor one pcs.
 Electrode cable, 200m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will
be double.
 Casing diameter 6''.
7.1 Change over switch 690v/32A. Pcs 01
7.2 Gs Heavy duty borehole riser pipe 2". mete 60
r
7.3 GI Pipe Thread extractor 1/2" - 2" For set 02
7.4 GI Pipe Thread extractor 2"- 4" maintenanc set 02

42
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

7.5 GI Pipe Thread extractor 3"- 6" e to Axum set 02


7.6 ---KW 400/230V arc Welding Machine (which can be weld up to 8” water set 01
heavy duty GI pipe.) with its accessary. Supply
7.7 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). office. pcs 08
2
7.8 HDPE butt welding Hydraulic machine from 65 -160mm with all set 01
accessories & compatible welding generator set.
7.9 HDPE butt welding Hydraulic machine from 90 mm-315m m2 with all set 01
accessories & compatible welding generator set.
8.0 Large Electro-mechanical maintenance toolkit (Electrical & set 02
Mechanical).
8.1 Medium Electro-mechanical maintenance toolkit (Electrical & set 02
Mechanical).
8.2 Small Electrical maintenance toolkit. set 02
Total Sub Cost…..

BOQ-for Wukro Maray water supply office


S/r Description Specific Unit Qty. Unit Total
site price price
1.1 Supply of three phase electrical Submersible pump with
Q=5.4m3/hr @H=130m & Power of 5.5 k.w.The pump should be
work at its maximum efficiency point according to the specification
with all necessary accessories such as:-
 Electrical Power cable length should be 150 meter (if the pump
motor connection is star delta starting system, the power cable
should be double of the given length).
 Control panel, one set based on the motor starting system. Borehole 1 set 01
Spare parts of Control panel.
Phase sequence relays one pcs.
Timer relay one pcs.
Surge arrester one pcs.

Over load relay one pcs.


Level controls relay one pcs.
Delta/main contactor one pcs.
 Electrode cable, 200m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will
be double.
 Casing diameter 6''.
1.2 Change over switch 690v/32A. For Pcs 01
1.3 Gs Heavy duty borehole riser pipe 2". Borehole 1 mete 78
r

43
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

2.0 Supply of three phase electrical Submersible pump with


Q=10.8m3/hr @H=135m & Power of 5.5 k.w.The pump should be
work at its maximum efficiency point according to the specification
with all necessary accessories such as:-
 Electrical Power cable length should be 150 meter (if the pump
motor connection is star delta starting system, the power cable Borehole 2 set 01
should be double of the given length).
 Control panel, one set based on the motor starting system.
Spare parts of Control panel.
Phase sequence relays one pcs.
Timer relay one pcs.
Surge arrester one pcs.

Over load relay one pcs.


Level controls relay one pcs.
Delta/main contactor one pcs.
 Electrode cable, 200m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece
 Two pair of 2'' pipe clamp
 Cable clips, per 3m length of the total power cable length
according to specification.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will
be double.
 Casing diameter 6''.
2.1 Change over switch 690v/75A. For Pcs 01
Borehole 2
2.2 Gs Heavy duty borehole riser pipe 2". mete 84
r
3.0 Supply of three phase electrical Submersible pump with
Q=16m3/hr @H=225m & Power of 15/18.5k.w.The pump should be
work at its maximum efficiency point according to the specification
with all necessary accessories such as:-
 Electrical Power cable length should be 120 meter (if the pump Collection set 01
motor connection is star delta starting system, the power cable chamber
should be double of the given length).
 Control panel, one set based on the motor starting system.
Spare parts of Control panel.
Phase sequence relays one pcs.
Timer relay one pcs.
Surge arrester one pcs.

Over load relay one pcs.


Level controls relay one pcs.
Delta/main contactor one pcs.
 Electrode cable, 200m (1.5mm2).
 Electrode sensor, 2 pieces
 40 bar pressure gauge, one piece.
 Volcanizing kit, 1 set for star connection & if the pump motor
connection is star delta starting system, the Volcanizing kit will

44
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

be double.
3.1 Medium Electro-mechanical maintenance toolkit (Electrical & set 01
Mechanical).
3.2 Small Electrical maintenance toolkit. set 01
3.3 GI Pipe Thread extractor 1/2" - 2" set 02
3.4 GI Pipe Thread extractor 2"- 4" set 02
3.5 GI Pipe Thread extractor 3"- 6" set 02
3.6 ---KW 400/230V arc Welding Machine (which can be weld up to 8” set 01
heavy duty GI pipe.) with its accessary.
3.7 GI Pipe wrench 18", 24", 36", and 48", (Two for each size). pcs 08
3.8 HDPE butt welding Hydraulic machine from 65 -160mm2 with all set 01
accessories & compatible welding generator set.
3.9 HDPE butt welding Hydraulic machine from 90-315mm2with all set 01
accessories & compatible welding generator set.
Total Sub Cost…..

2. BOQ for Eastern Zone

Total Unit Total


S/No Description Unit Qty price price

Medaadi site Wukiro town site Supply of three phase Electrical Submersible
pump with the operating point

Q=300-585l/m,H=159m51mandwithallnecessary accessories such as non


return valve, control panel with all accessories,2electrodes,Two single
1.5mm²x1 control cable for electrodes equal length with 150m, pressure
gauge 0-40bar,volkanizing kitetc,power cable 150m(double if the motor is
1 star-delta), Borehole Casing diameter (8")(22kw) set 01

2 Werda k/awilaelo(tabiyaAynalem and Negash)

Aynalem town site Supply of three phase Electrical Submersible pump with
the operating point Q=4l/s H=180mandwithallnecessary accessories such as
non return valve, control panel with all accessories,2electrodes,Two single
1.5mm²x1 control cable for electrodes equal length with 150m, pressure
gauge 0-40bar,volkanizing kit etc,power cable 150m(double if the motor is
2.1 star-delta), Borehole Casing diameter (6")(9.2KW) set 01

Negash town site Supply of three phase Electrical Submersible pump with the
operating point Q=5l/s H=157mandwithallnecessary accessories such as
2.2 non return valve, control panel with all accessories,2electrodes,Two single set 01
1.5mm²x1 control cable for electrodes equal length with 150m, pressure

45
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit Total


S/No Description Unit Qty price price

gauge 0-40bar,volkanizing kit etc,power cable 150m(double if the motor is


star-delta), Borehole Casing diameter (6")(7.5kw)

3 EdagaHamus town

Control panel(Switch board) 37kw and 22kw impedance/autotransformer


type
3.1 set 02

4 Werdasobihasaesie(tabiakomasobiha)

Komasobihatown site Supply of three phase Electrical Submersible pump


with the operating point Q=4l/s H=140mandwithallnecessary accessories
such as non-return valve, control panel with all set
accessories,2electrodes,Two single 1.5mm²x1 control cable for electrodes
equal length with 150m, pressure gauge 0-40bar,volkanizing kit etc,power
cable 150m(double if the motor is star-delta), Borehole Casing diameter
4.1 (6")(13KW) 01

5 Agulae town

Agulaetown site Supply of three phase Electrical Submersible pump with the
operating point Qmax=58m3/hr,Qmin=36m3/hr and
Hmax=225m,Hmin=143m withal necessary accessories such as non-return
valve, control panel with all accessories,2electrodes,Two single 1.5mm²x1
control cable for electrodes equal length with 150m, pressure gauge 0-
40bar,volkanizing kit etc,power cable 150m(double if the motor is star-
delta), Borehole Casing diameter (8")(37KW)
5.1 set 01

6 Deblasiet&kerseber

46
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit Total


S/No Description Unit Qty price price

Deblasiet&kersebersite Supply of three phase Electrical Submersible pump


with the operating point Q=2.2l/s and H=150m withallnecessary accessories
such as non-return valve, control panel with all accessories,2electrodes,Two
single 1.5mm²x1 control cable for electrodes equal length with 150m,
pressure gauge 0-40bar,volkanizing kit etc,power cable 150m(double if the
motor is star-delta), Borehole Casing diameter (6")(5.5KW)

6.1 set 02

7 Dera

Dera site Supply of three phase Electrical Submersible pump with the
operating point Q=2.2l/s and H=158 withallnecessary accessories such as
non return valve, control panel with all accessories,2electrodes,Two single
1.5mm²x1 control cable for electrodes equal length with 150m, pressure
gauge 0-40bar,volkanizing kit etc,power cable 150m(double if the motor is
star-delta), Borehole Casing diameter (6")(5.5KW)

7.1 set 01

8 Haikimesihal

8.1 Haikimseshalsite Supply of three phase Electrical Submersible pump with the 01
operating point Q=3l/s and H=131 withallnecessary accessories such as non

47
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit Total


S/No Description Unit Qty price price

return valve, control panel with all accessories,2electrodes,Two single


1.5mm²x1 control cable for electrodes equal length with 150m, pressure
gauge 0-40bar,volkanizing kit etc,power cable 150m(double if the motor is
star-delta), Borehole Casing diameter (6")(5.5KW)

set

9 HaWizen

Endatseblasite Supply of three phase Electrical Submersible pump with the


operating point Q=4l/s and H=120mwithallnecessary accessories such as
non-return valve, control panel with all accessories,2electrodes,Two single set
1.5mm²x1 control cable for electrodes equal length with 150m, pressure
gauge 0-40bar,volkanizing kit etc,power cable 150m(double if the motor is
9.1 star-delta), Borehole Casing diameter (6")(5.5KW) 01

sutasite Supply of three phase Electrical Submersible pump with the


operating point Q=5l/s and H=198m withal necessary accessories such as non
return valve, control panel with all accessories,2electrodes,Two single
1.5mm²x1 control cable for electrodes equal length with 150m, pressure
gauge 0-40bar,volkanizing kit etc,power cable 150m(double if the motor is
star-delta), Borehole Casing diameter (8")(18.5KW)

9.2 set 01

10 Dewhan and Alitena

48
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit Total


S/No Description Unit Qty price price

Dewhan and Alitenasite Supply of three phase Electrical Submersible pump


with the operating point Q=2.2l/s and H=158m withallnecessary accessories
such as non return valve, control panel with all accessories,2electrodes,Two
single 1.5mm²x1 control cable for electrodes equal length with 150m,
pressure gauge 0-40bar,volkanizing kit etc,power cable 150m(double if the
motor is star-delta), Borehole Casing diameter (6")(5.5KW)

10.1 set 02

All well head fittings for two sites(flang gate valve,checkvalve,water meter & pcs
10.2 air reliese valve)all 2’’ 08

11 Atsibi

AtsibiSupply of three phase Electrical Submersible pump with the operating


point Q=7.2l/s and H=137m withal necessary accessories such as non-return
valve, control panel with all accessories,2electrodes,Two single 1.5mm²x1
control cable for electrodes equal length with 150m, pressure gauge 0-
40bar,volkanizing kit etc,power cable 150m(double if the motor is star-
delta), Borehole Casing diameter (6")(18.5KW)

11.1 set 01

12 Edagahamus

49
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit Total


S/No Description Unit Qty price price

Edagahamus town Supply of three phase Electrical Submersible pump with


the operating point Q=30l/s and H=180m withallnecessary accessories such
as non return valve, control panel with all accessories,2electrodes,Two
single 1.5mm²x1 control cable for electrodes equal length with 150m,
pressure gauge 0-40bar,volkanizing kit etc,power cable 150m(double if the
motor is star-delta), Borehole Casing diameter (8")(37KW)

12.1 set 01

13 Tewldemedhin/hadistesfa

HadistesfaSupply of three phase Electrical Submersible pump with the


operating point Q=3l/s and H=150m withallnecessary accessories such as
non return valve, control panel with all accessories,2electrodes,Two single
1.5mm²x1 control cable for electrodes equal length with 150m, pressure
gauge 0-40bar,volkanizing kit etc,power cable 150m(double if the motor is
star-delta), Borehole Casing diameter (6")(11KW)

13.1 set 01

14 Mugula

Control panel(switch board) 22KW star-delta with all controlling system

14.1 set 04

50
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit Total


S/No Description Unit Qty price price

15 Adigrat town

Bore hole abuneargawi(BHAR8) Supply of three phase Electrical


Submersible pump with the operating point Q=4l/s and H=145m
withallnecessary accessories such as non return valve, control panel with all
accessories,2electrodes,Two single 1.5mm²x1 control cable for electrodes
equal length with 150m, pressure gauge 0-40bar,volkanizing kit etc,power
cable 150m(double if the motor is star-delta), Borehole Casing diameter
(8")(15KW)

15.1 set 01

15.1.1 Supply storage battery 12v,70Amp pc 01

15.1.2 Supply change over switch 100Amp pc 01

Bore hole abunearegawi(BHAR9) Supply of three phase Electrical


Submersible pump with the operating point Q=19l/s and H=135m
withallnecessary accessories such as non return valve, control panel with
all accessories,2electrodes,Two single 1.5mm²x1 control cable for electrodes set
equal length with 150m, pressure gauge 0-40bar,volkanizing kit etc,power
cable 150m(double if the motor is star-delta), Borehole Casing diameter
15.2 (8")(45KW) 01

Bore hole DIPO(BH DIPO 1) Supply of three phase Electrical Submersible


pump with the operating point Q=5l/s and H=120m withal necessary
accessories such as non-return valve, control panel with all
accessories,2electrodes,Two single 1.5mm²x1 control cable for electrodes
equal length with 150m, pressure gauge 0-40bar,volkanizing kit etc,power
cable 150m(double if the motor is star-delta), Borehole Casing diameter
(8")(11KW)

15.3 01

51
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit Total


S/No Description Unit Qty price price

set

Supply of Solar pump dc motor portion 4Kw(werdasobihasaesie)

16 pc 01

17 megab

Supply of generators 120kVA for borehole and 60kVA for collection chamber

17.1 set 02

Tsigereda town Supply of three phase Electrical Submersible pump with the set
operating point Q=3.3l/s and H=200m withal l necessary accessories such
as non-return valve, control panel with all accessories,2electrodes,Two
single 1.5mm²x1 control cable for electrodes equal length with 150m,
pressure gauge 0-40bar,volkanizing kit etc,power cable 150m(double if the
18 motor is star-delta), Borehole Casing diameter (6")(7.5KW) 01

Desea town(tifoso site) Supply of three phase Electrical Submersible pump


with the operating point Q=3.3l/s and H=200m with al l necessary
accessories such as non-return valve, control panel with all
accessories,2electrodes,Two single 1.5mm²x1 control cable for electrodes
equal length with 150m, pressure gauge 0-40bar,volkanizing kit etc,power
cable 150m(double if the motor is star-delta), Borehole Casing diameter
(6")(7.5KW)

19 01

52
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit Total


S/No Description Unit Qty price price

set

20 Supply of three phase Electrical Submersible pump with the operating set 1
point Q=12l/s and H=230m with all necessary accessories such as non
return valve, control panel with all accessories,2electrodes,Two
single 1.5mm²x1 control cable for electrodes equal length with 150m,
pressure gauge 0-40bar,volkanizing kit etc, power cable 150m(double
if the motor is star-delta), Borehole Casing diameter (8")(37kw)

21 Supply of three phase Electrical Submersible pump with the operating set 1
point Q=3l/s and H=150mwithallnecessary accessories such as non
return valve, control panel with all accessories,2electrodes,Two
single 1.5mm²x1 control cable for electrodes equal length with 150m,
pressure gauge 0-40bar,volkanizing kit etc, power cable 150m(double
if the motor is star-delta), Borehole Casing diameter (6")(22kw)

Total Price

Vat 15%

Total price with vat 15%

22 Supply of three phase Electrical Submersible pump with the set 1


operating point Q=7l/s and H=119mwith all necessary
accessories such as non return valve, control panel with all
accessories,2electrodes,Two single 1.5mm²x1 control cable for
electrodes equal length with 150m, pressure gauge 0-
40bar,volkanizing kit etc, power cable 150m(double if the
motor is star-delta), Borehole Casing diameter (6")(15kw)

23. Supply of three phase Electrical Submersible pump with the set 1
operating point Q=3l/s and H=128mwith all necessary
accessories such as non return valve, control panel with all

53
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

accessories,2electrodes,Two single 1.5mm²x1 control cable for


electrodes equal length with 150m, pressure gauge 0-
40bar,volkanizing kit etc, power cable 150m(double if the
motor is star-delta), Borehole Casing diameter (5"))(7.5kw)

Total Price

Vat 15%

Total price with vat 15%

24 Adigrat site (BH-AR-10)Supply of three phase Electrical set 1


Submersible pump with the operating point Q=20l/s and
H=120m with all necessary accessories such as non-return
valve, control panel with all accessories,2electrodes,Two
single 1.5mm²x1 control cable for electrodes equal length
with 150m, pressure gauge 0-40bar,volkanizing kit etc, power
cable 150m(double if the motor is star-delta), Borehole Casing
diameter (8")(45kw)

Total Price

Vat 15%

Total price with vat 15%

25 Engal site Supply of three phase Electrical horizontal surface set 02


pump with the operating point Q=32.94m3/hr and
H=220mwith all necessary accessories such as non return
valve, control panel with all accessories,2electrodes,Two
single 1.5mm²x1 control cable for electrodes equal length
with 150m, pressure gauge 0-40bar,volkanizing kit etc,
power cable 150m(double if the motor is star-delta), (75kw)

26 Dewhan site supply of three phase Electrical horizontal set 02


surface pump with the operating point Q=44.7m3/hr and
H=132mwith all necessary accessories such as non return
valve, control panel with all accessories,2electrodes,Two
single 1.5mm²x1 control cable for electrodes equal length
with 150m, pressure gauge 0-40bar,volkanizing kit etc,
power cable 150m(double if the motor is star-delta), (45kw)

54
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

27 Alitena site supply of three phase Electrical horizontal 02


surface pump with the operating point Q=61.7m3/hr and
H=156mwith all necessary accessories such as non return
valve, control panel with all accessories,2electrodes,Two
single 1.5mm²x1 control cable for electrodes equal length
with 150m, pressure gauge 0-40bar,volkanizing kit etc,
power cable 150m(double if the motor is star-delta)(75kw)

Total Price

Vat 15%

Total price with vat 15%

3. BOQ for North Western

1. Bill of Quantity for supply of electrical submersible pump for North western zone.
Total Unit
S/No Description Unit Qty price Total price

Adgebru Enkoy liham Three phase Electrical Submersible


pump with all Accessories and with the operating point

 Capacity 5.5 KW
 Discharge =2l/s
 Head =120m
 Casing diameter 6’’
 Power cable 100m
 Generator 20KVA

1. set 01

Adinebried (May shak) Three phase Electrical Submersible


pump with allAccessories and withthe operating point

 Capacity 11 KW
2.
 Discharge =3.3l/s

55
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

 Head =184m
 Power cable 100m
 Casing diameter 6’’
 Generator 50 KVA

Adinebried (Sewhi) Three phase Electrical Submersible


pump with allAccessories and withthe operating point

 Capacity 11KW
 Discharge =10.3 m3/h
 Head =168m
 Power cable 100m
 Casing diameter 6''
3.
 Generator 50 KVA

Adihageray (lese borehole) Three phase Electrical


Submersible pump with allAccessories and with the
operating point

 Capacity 22 KW
 Discharge =7l/s
 Head =215m
 Casing dia 6''
 Power cable = 200m
 Casing diameter 6’’
 Generator 60KVA

4.

56
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

Adihageray (Mumat Merawi Collection chamber ) Three


phase Vertical surface pump with Accessories and with the
operating point

 Capacity 26KW
 Discharge =14.4 m3/h
 Head =200m
 Power cable = 60m
 Generator 80KVA

5.

Adihageray (May hutsa borehole ) Three phase Electrical


Submersible pump with Accessories and with the operating
point

 Capacity 11 KW
 Discharge =3.3L/S
 Head =200m
 Casing diameter 6''
 Power cable =100m

6.

Adihageray (Ela kebede Collection chamber ) Three phase


Electrical Submersible pump with Accessories and with the
operating point
7.
 Capacity 15KW

57
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

 Discharge =17m3/h
 Head =203m
 Power cable = 50m

Adihageray (May hutsa hydrant) Three phase Electrical


Submersible pump with Accessories and with the operating
point

 Capacity = 5.5 KW
 Power cable =100m
 Generator 20KVA
8.

Adihageray (May hutsa hydrant Mekelakeya) Three phase


Electrical Submersible pump with Accessories and with the
operating point

 Capacity = 5.5 KW
 Power cable =100m
 Generator 20KVA
9.

Zbangedena Three phase Horizontal surface pump with


Accessories and with the operating point

 Capacity 45 KW
 Discharge =54 m3/h
 Head =160m
 Quantity = 02
 Power cable -200m
10.
 Generator 400KVA

58
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

Sheraro (Treatment) Three phase Horizontal surface pump


with Accessories and with the operating point

 Capacity 22 KW
 Discharge =68.49m3/h
 Head =60m
 Quantity = 02
 Power cable -200m
11.

Debreabay Spring. Three phase Electrical submersible pump


with Accessories and with the operating point

 Capacity 22 KW
 Discharge =5l/s
 Head =190m
 Power cable =100m
 Generator 60KVA
12.

Selekleka (sewhi) Three phase Electrical submersible pump


with Accessories and with the operating point

 Capacity 7.5 KW
 Discharge =18m3/h
 Head =92m
13.
 Casing Diameter 6’’

59
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

 Power cable =100m


 Generator 50KVA

Selekleka (Tambok) Three phase Electrical submersible


pump with Accessories and with the operating point

 Capacity 7.5 KW
 Discharge =18m3/h
 Head =160m
 Casing Diameter 6’’
 Power cable 100m
14.

Selekleka (IDP ) Three phase Electrical submersible pump


with Accessories and with the operating point

 Capacity 7.5 KW
 Discharge =18m3/h
 Head =108m
 Casing Diameter 6’’
 Power cable 100m
15.

Selekleka (Mono pump ) Three phase Electrical submersible


pump with Accessories and with the operating point

 Capacity 5.5 KW
16.
 Discharge =8m3/h

60
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

 Head =90m
 Casing Diameter 6’’
 Power cable 100m

Adida-ero (May duri No-1 ) Three phase Electrical


submersible pump with Accessories and with the operating
point

 Capacity 15 KW
 Discharge =6.3l/s
 Head =165m
 Casing Diameter 6’’
 Power cable =100m
 Generator 60KVA
17.

Adida-ero (May duri No-2) Three phase Electrical


submersible pump with Accessories and with the operating
point

 Capacity 5.5 KW
 Discharge =2l/s
 Head =120m
 Casing Diameter 6’’
 Power cable 100m
18.
 Generator 25KVA

Adida-ero( hydrant Mekelakeya) Three phase Electrical


Submersible pump with Accessories and with the operating
19. point

61
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

 Capacity = 5.5 KW
 Power cable =100m
 Generator 20KVA

Adwala borehole -1. Three phase Electrical submersible


pump with Accessories and with the operating point

 Capacity = 11 KW
 Discharge =3l/s
 Head =210m
 Casing Diameter 6’’
 Power cable =100m
 Generator 45KVA
20.

Adwala borehole -2. Three phase Electrical submersible


pump with Accessories and with the operating point

 Capacity = 15 KW
 Discharge =5l/s
 Head =200m
 Casing Diameter 6’’
 Power cable =100m
 Generator 60 KVA
21.

Adwala Collection chamber Three phase Electrical


submersible pump with Accessories and with the operating
point
22.
 Capacity = 30 KW

62
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

 Discharge =10l/s
 Head =220m
 Power cable =100m
 Generator 130 KVA

Ksadgaba (Engoyla) Three phase Electrical surface pump


with Accessories and with the operating point

 Capacity 3KW and 11 KW


 Discharge =10l/s
 Head =50m Qty=02
 Generator 50KVA
 Discharge =50l/s
 Head =300m Qty=03
 Power cable =200m
 Generator 20KVA
 Stand by switch board for each
23.

Shire Damp Three phase Four Horizontal surface pump


with Accessories and with the operating point

 Capacity 110 KW
 Discharge =25l/s
 Head =230m
 Power cable =100m
 Generator 650KVA
24.
 Qty = 04

63
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

Shire Treatment Three phase Four Horizontal surface


pump with Accessories and with the operating point

 Capacity 90 KW
 Discharge =80 m3/h
 Head =220m
 Power cable =100m
 Generator 630KVA
 Qty = 04
25.

DebagunaWalkaThree phase Electrical submersible pump


with Accessories and with the operating point

 Capacity 7.5 KW
 Discharge =5l/s
 Head =105m
 Casing Diameter 8’’
 Power cable =100m
 Generator 25KVA
26.

Debaguna DefoThree phase Electrical submersible pump


with Accessories and with the operating point

 Capacity 5.5 KW
 Discharge =3l/s
 Head = 115m
 Casing Diameter 8’’
27.
 Power cable =100m

64
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

 Generator 20 KVA

DebagunalemlemThree phase Electrical submersible pump


with Accessories and with the operating point

 Capacity 11 KW
 Discharge =5.5 l/s
 Head =132m
 Casing Diameter 8’’
 Power cable =100m
 Generator 30 KVA
28.

ZanaDebrekerbeThree phase Electrical submersible pump


with Accessories and with the operating point

 Capacity 11 KW
 Discharge =4 l/s
 Head = 130m
 Casing Diameter 6’’
 Power cable =100m
 Generator 30 KVA
29.

ZanaDebrekerbeThree phase Electrical submersible pump


with Accessories and with the operating point

 Capacity 22KW
 Discharge =10l/s
 Head = 1600m
30.
 Casing Diameter 6’’

65
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

 Power cable =100m


 Generator 60 KVA

Shire bet t/tiTsehaye (village ) Three phase Electrical


submersible pump with Accessories and with the operating
point

 Capacity = 7.5 KW
 Discharge =2l/s
 Head = 128m
 Casing Diameter 6’’
 Power cable =100m

ShireMeleso(village ) Three phase Electrical submersible


pump with Accessories and with the operating point

 Capacity 5.5 KW
 Discharge =3l/s
 Head = 128m
 Casing Diameter 6’’
 Power cable =100m

31.

Shire May gubo (village ) Three phase Electrical submersible


pump with Accessories and with the operating point
32.
 Capacity 7.5 KW

66
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

 Discharge =4l/s
 Head = 106m
 Casing Diameter 6’’
 Power cable =100m

Shire May gushelaA(village ) Three phase Electrical


submersible pump with Accessories and with the operating
point

 Capacity = 5.5 KW
 Discharge =3l/s
 Head = 158m
 Casing Diameter 6’’
 Power cable =100m

Shire May gushelaB (village ) Three phase Electrical


submersible pump with Accessories and with the operating
point

 Capacity = 5.5 KW
 Discharge =2l/s
 Head = 158m
 Casing Diameter 6’’
 Power cable =100m
33.
 Generator For two site 100KVA

Shire May Liham (village ) Three phase Electrical


34.
submersible pump with Accessories and with the operating

67
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

point

 Capacity = 18.5 KW
 Discharge =2l/s
 Head =147m
 Casing Diameter 8’’
 Power cable =100m
 Generator 60KVA

Shire Adihano (village ) Three phase Electrical submersible


pump with Accessories and with the operating point

 Capacity = 5.5 KW
 Discharge =2l/s
 Head =229.3m
 Casing Diameter 6’’
35.
 Power cable =100m

Shire Adietay borehole (village ) Three phase Electrical


submersible pump with Accessories and with the operating
point

 Capacity = 11KW
 Discharge =4l/s
 Head =128m
 Casing Diameter 6’’
36.
 Power cable =100m

Shire Adietay Collection chamber (village ) Three phase


Electrical submersible pump with Accessories and with the
operating point

 Capacity = 11KW
37.
 Discharge =18l/s

68
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

 Head = 128m
 Power cable =200m

Shire Endagermen Collection chamber (village ) Three


phase Electrical submersible pump with Accessories and
with the operating point

 Capacity = 30 KW
 Discharge =18l/s
 Head = 128m
38.
 Power cable =200m

T/adiabo Gezameker Three phase Electrical submersible


pump with Accessories and with the operating point

 Capacity = 13 KW
 Discharge =4l/s
 Head =220m
 Power cable =100m
 Casing Diam 6’’

T/adiaboLemlem mudb-1Three phase Electrical submersible


pump with Accessories and with the operating point

 Capacity = 7.5 KW
 Discharge =2l/s
 Head =120m
 Power cable =100m
 Casing Diam 6’’
39.
 Generator 25KVA

T/adiaboLemlem mudb-2Three phase Electrical submersible


pump with Accessories and with the operating point
40.
 Capacity = 4 KW

69
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

 Discharge =4l/s
 Head = 120m
 Power cable =100m
 Casing Diam4’’
 Generator 20KVA

T/adiaboLemlem mudb-3Three phase Electrical submersible


pump with Accessories and with the operating point

 Capacity = 13 KW
 Discharge =15l/s
 Head =220m
 Power cable =100m
 Casing Diam 6’’
41.
 Generator 30KVA

T/adiabo Mflah bun hydrant Three phase Electrical


submersible pump with Accessories and with the operating
point

 Capacity = 37 KW
 Discharge =6l/s
 Power cable =100m
 Casing Diam14’’
42.
 Generator 100KVA

T/adiabo Algaynesh MayarkayThree phase Electrical


submersible pump with Accessories and with the operating
point

 Capacity = 4 KW
 Discharge =2l/s
43.
 Head =60m

70
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Total Unit
S/No Description Unit Qty price Total price

 Power cable =100m


 Casing Diam 6’’

T/adiaboAlgaynesh MayarkayThree phase Electrical


submersible pump with Accessories and with the operating
point

 Capacity = 4 KW
 Discharge =1.2l/s
 Head = 60m
 Power cable =60m
 Casing Diam5’’
44.

T/adiabo Hayelom E/chaina Hydrant Three phase Electrical


submersible pump with Accessories and with the operating
point

 Capacity = 4 KW
 Discharge =1l/s
 Head =43m
 Power cable =50m
 Casing Diam 6’’
 Generator 20KVA
45.

North West Zone

71
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

No Capacity Type of pump Unit Total

1. 5.5 KW Submersible pump Pcs 11

2. 3 KW Horizontal Surface pump Pcs 03

3. 4 KW Submersible pump Pcs 05

2. 7.5KW Submersible pump Pcs 12

Submersible pump Pcs 08

3. 11KW Horizontal Surface pump Pcs 02

4. 13KW Submersible pump Pcs 02

5. 15KW Submersible pump Pcs 03

6. 18.5 KW Submersible pump Pcs 01

Horizontal Surface pump Pcs 03

7. 22 KW Submersible pump Pcs 03

8. 26 KW Vertical Surface pump Pcs 01

9. 30 KW Horizontal Surface pump Pcs 01

10. 37 KW Submersible pump Pcs 01

11. 45 KW Submersible pump Pcs 02

12. 110 KW Horizontal Surface pump Pcs 05

13. 90 KW Horizontal Surface pump Pcs 05

72
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

4. BOQ for Southern

BOQ-1for Pump & Generator Wereda Raya-Azebo Water Supply Project

S.No Description Unit Qty Unit price Total price

Adi sara(Genetea) site Supply & installation complete stand


by generator including all necessary accessories with having a
1 capacity 16KVA Set 1

Arada-Basa (Mechare) site Supply & installation complete


stand by generator including all necessary accessories with
2 having a capacity 30KVA Set 1

Arada-Basa (Mechare) site Supply of electrical submersible


motor portion of three phase the capacity of the motor
portion is 9.2KW
3 set 1
 Volcanizing kit

73
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Ebo Adi-mahgo site Supply of electrical submersible pump of


three phase with Q =2l/s H=98 m p=3kw. The pump Should
work at its maximum efficiency point according to the
specification with all necessary accessories Such as

120m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,300m and respectively (1.5mm2)
*electrode, 3 pieces
*20 bars pressure gauge, one piece
*Volcanizing kit, 1 set

4 set 1

Ebo Adi-mahgo site Supply & installation complete stand by


generator including all necessary accessories with having a
5 capacity 12KVA set 1

Soloka (mechare) site Supply of electrical submersible pump


of three phase with Q =7l/s H=95 m p=11kw. The pump
Should work at its maximum efficiency point according to the
specification with all necessary accessories Such as

120m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,300m and respectively (1.5mm2)
*electrode, 3 pieces
*20 bars pressure gauge, one piece
*Volcanizing kit, 1 set

6 set 1

Soleka (Mechare) site Supply & installation complete stand


by generator including all necessary accessories with having a
7 capacity 30KVA

Areda Mengedu( Adi-koyaru) site Supply of electrical


submersible pump of three phase with Q =2.5l/s H=98 m
8 set 1
p=4kw. The pump Should work at its maximum efficiency

74
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

point according to the specification with all necessary


accessories Such as

120m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,300m and respectively (1.5mm2)
*electrode, 3 pieces
*20 bars pressure gauge, one piece
*Volcanizing kit, 1 set

Areda Mengedu( Adi-koyaru ) site Supply & installation


complete stand by generator including all necessary
9 accessories with having a capacity 12KVA set 1

BOQ-2 for Pump & Generator Wereda Raya-Alamata Water Supply

S.No Description Unit Qty Unit price Total price

Kalikal(chemaro) site Supply and installation of electrical


submersible pump of three phase with Q =4.7 l/s H= 197m
p=15kw. The pump Should work at its maximum efficiency
point according to the specification with all necessary
accessories such as :

150m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,300m and respectively (1.5mm2)
*electrode, 3 pieces
*25 bars pressure gauge, one piece
1 *Volcanizing kit, 1 set Set 1

Selen wuha site Supply & install solar inventor having a


2 capacity of 15kw including all necessary accessories set 1

75
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Kajima (Limat) site Supply and installation of electrical


submersible pump of three phase with Q =2.5 l/s H= 70m
p=3kw. The pump Should work at its maximum efficiency
point according to the specification with all necessary
accessories such as :

100m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,300m and respectively (1.5mm2)
*electrode, 3 pieces
*20 bars pressure gauge, one piece
3 *Volcanizing kit, 1 set set 1

Kajima site Supply & install complete stand by generator


including all necessary accessories and having a capacity
4 12KVA set 1

Selen wuha site Gedera 1 supply and installation for GS pipe


5 2” meter 24m

Selen wuha site Gedera Supply and installation of electrical


submersible pump of three phase with Q =3.5 l/s H= 150m
p=9.2kw=. The pump Should work at its maximum efficiency
point according to the specification with all necessary
accessories such as :

150m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,300m and respectively (1.5mm2)
*electrode, 3 pieces
*40 bars pressure gauge, one piece
6 *Volcanizing kit, 1 set

BOQ-3 for Pump & Generator Raya-Chercher Water Supply

S.No Description Unit Qty Unit price Total price

76
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Bala town site Supply and installation of electrical


submersible pump of three phase with Q =8 l/s H= 260m
p=30kw. The pump Should work at its maximum efficiency
point according to the specification with all necessary
accessories such as :

150m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,300m and respectively (1.5mm2)
*electrode, 3 pieces
*40 bars pressure gauge, one piece
1 *Volcanizing kit, 1 set Set 1

Adi-Berhe Reda(Hadi-Alga site Supply & install complete stand


by generator including all necessary accessories and having a
2 capacity 25KVA set 2

Adi-Tela (Hadi-Alga) site Supply and installation of electrical


submersible pump of three phase with Q =4 l/s H= 95m
p=7.5kw. The pump Should work at its maximum efficiency
point according to the specification with all necessary
accessories such as :

150m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,300m and respectively (1.5mm2)
*electrode, 3 pieces
*40 bars pressure gauge, one piece
3 *Volcanizing kit, 1 set set 1

Adi-Tela (Hadi-alga) site Supply & install complete stand by


generator including all necessary accessories and having a
4 capacity 25KVA set 1

Weyra-wuha Chercher town site Supply & install complete


stand by generator including all necessary accessories and
5 having a capacity 30KVA set 1

77
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Shewit-Goro (Bage-Delwo) site Supply and installation of


electrical submersible pump of three phase with Q =4 l/s H=
95m p=7.5kw. The pump Should work at its maximum
efficiency point according to the specification with all
necessary accessories such as :

150m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,300m and respectively (1.5mm2)
*electrode, 3 pieces
*40 bars pressure gauge, one piece
6 *Volcanizing kit, 1 set set 1

Shewit-Goro (Bage-Delwo site Supply & install complete


stand by generator including all necessary accessories and
7 having a capacity 25KVA set 1

Erba site Supply and installation of electrical submersible


pump of three phase with Q =2 l/s H= 122m p=4kw. The
pump Should work at its maximum efficiency point according
to the specification with all necessary accessories such as :

150m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,300m and respectively (1.5mm2)
*electrode, 3 pieces
*40 bars pressure gauge, one piece
8 *Volcanizing kit, 1 set set 1

BOQ-4 for Pump & switch board Maichew town Water Supply

S.No Description Unit Qty Unit price Total price

78
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Maichew town site Supply and installation of electrical


surface pump of three phase with Q =57m3/h H= 113m
p=30kw. The pump Should work at its maximum efficiency
point according to the specification with all necessary
accessories such as :

60m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,180m and respectively (1.5mm2)
1 *electrode, 3 pieces Set 1

Maichew town office site Supply and installation of electrical


surface pump of three phase with Q =10l/s H= 100m
p=15kw. The pump Should work at its maximum efficiency
point according to the specification with all necessary
accessories such as :

60m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,180m and respectively (1.5mm2)
*electrode, 3 pieces
2 *40 bars pressure gauge, one piece set 2

Maichew town office site Supply and installation of electrical


surface pump of three phase with Q =4l/s H= 100m
p=7.5kw. The pump Should work at its maximum efficiency
point according to the specification with all necessary
accessories such as :

60m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,180m and respectively (1.5mm2)
*electrode, 3 pieces
3 *40 bars pressure gauge, one piece Set 2

79
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

Maichew town site Supply and installation of electrical


4 switch board star-delta with having a capacity 26kw number 1

Maichew town BH 09 site Supply and installation of


electrical submersible pump of three phase with Q
=14.4m3/h H= 106m p=7.5kw. The pump Should work at its
maximum efficiency point according to the specification
with all necessary accessories such as :

150m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,180m and respectively (1.5mm2)
*electrode, 3 pieces
5 *40 bars pressure gauge, one piece

Maichew town BH 01 site Supply and installation of


electrical submersible pump of three phase with Q
=21.6m3/h H= 74m p=7.5kw. The pump Should work at its
maximum efficiency point according to the specification
with all necessary accessories such as :

150m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,180m and respectively (1.5mm2)
*electrode, 3 pieces
6 *40 bars pressure gauge, one piece

Maichew town BH 04 site Supply and installation of


electrical submersible pump of three phase with Q =36m3/h,
H= 81m p=13kw. The pump Should work at its maximum
efficiency point according to the specification with all
necessary accessories such as :

150m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

7 *Control panel, one piece


*electrode cable,180m and respectively (1.5mm2)

80
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

*electrode, 3 pieces
*40 bars pressure gauge, one piece

Maichew town BH12 site Supply and installation of electrical


submersible pump of three phase with Q =32.4m3/h H=
117m p=18.5kw. The pump Should work at its maximum
efficiency point according to the specification with all
necessary accessories such as :

150m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,180m and respectively (1.5mm2)
*electrode, 3 pieces
8 *40 bars pressure gauge, one piece

BOQ-5 for Pump Adi-shaho town Water Supply

S.No Description Unit Qty Unit price Total price

Adishaho town site Supply and installation of electrical


surface pump of three phase with Q =4l/s H= 150m p=9.2kw.
The pump Should work at its maximum efficiency point
according to the specification with all necessary accessories
such as :

60m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,180m and respectively (1.5mm2)
1 *electrode, 3 pieces Set 2

81
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

BOQ-5 for Pump Nequisege town Water Supply

Description Unit Qty Unit price Total price

Nequisege town site Supply and installation of electrical


surface pump of three phase with Q =3l/s H= 130m p=7.5kw.
The pump Should work at its maximum efficiency point
according to the specification with all necessary accessories
such as :

150m power cable (if the motor connection is star delta


starting system the, power cable should be double for the
given length)

*Control panel, one piece


*electrode cable,180m and respectively (1.5mm2)
*electrode, 3 pieces Set 2

5. BOQ FOR HEAVY DUTY RISER PIPES

S.NO Description unit QTY UNIT TOTAL PRICE


PRICE

4 Supply of heavy duty riser pipes(for all zones)

4.1 4” GI heavy duty riser pipe meter 1,500

4.2 3” GI heavy duty riser pipe meter 2,520

4.3 21/2” GI heavy duty riser pipe meter 4,200

4.4 2” GI heavy duty riser pipe meter 4,002

4.5 11/2” GI heavy duty riser pipe meter 996

Total Price

Vat 15%

Total price with vat 15%

82
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

6. BOQ FOR PIPLES AND FITTINGS

S.No Description

4 Pipes & Fittings Unit Qty. Unit Total


price price
4.1 GI pipe 4" Medium Class. meter 600
4.2 GI pipe 3" Medium Class. meter 2100
4.3 GI pipe 2" Medium Class. meter 1200
4.4 GI pipe 2 1/2" Medium Class meter 300
4.5 GI pipe 1 1/2" Medium Class meter 300
4.6 PVC collar DN50, PN10 with internal Ø-63mm & gaskets. pcs 08
4.7 PVC collar DN80, PN10 with internal Ø-90mm & gaskets. pcs 06
4.8 PVC collar DN100, PN10 with internal Ø-110mm & gaskets. pcs 05
4.9 PVC collar DN150, PN10 with internal Ø-160mm & gaskets. pcs 05
4.1 PVC collar DN200, PN10 with internal Ø-280mm & gaskets. pcs 05
0
4.1 PVC collar DN250, PN10 with internal Ø-280mm & gaskets. pcs 05
1
4.1 PVC collar DN300, PN10 with internal Ø-315mm &gaskets. pcs 06
2
4.1 PVC Bend DN200/90,PN16 internal Ø-215mm pcs 05
3
4.1 PVC Bend DN250/90,PN16 internal Ø-280mm pcs 05
4
4.1 PVC Bend DN100/90,PN16 internal Ø-110mm pcs 05
5
4.1 PVC Bend DN80/90,PN16 internal Ø-90mm pcs 05
6
4.1 PVC Bend DN80/45,PN16 internal Ø-90mm pcs 05
7
4.1 PVC Bend DN280/90,PN16 external Ø-280mm pcs 05
8
4.1 PVC Tee DN200/90, PN16 with internal Ø-215mm & gaskets. pcs 05
9
4.2 DCI saddle clump DN 50, PN 16 with gaskets & other if necessary. pcs 10
0
4.2 DCI saddle clump DN 50, PN 16 with gaskets & other if necessary. pcs 10
1
4.2 DCI saddle clump DN 80, PN 16 with gaskets & other if necessary. pcs 10
2
4.2 DCI saddle clump DN 100, PN 16 with gaskets & other if necessary. pcs 10
3
4.2 DCI saddle clump DN 150, PN 16 with gaskets & other if necessary. pcs 10
4
4.2 DCI saddle clump DN 200, PN 16 with gaskets& other if necessary. pcs 10
5
4.2 DCI saddle clump DN 200, PN 16 with gaskets& other necessary. pcs 8

83
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

6
4.2 DCI saddle clump DN 250, PN 16 with gaskets& other if necessary. pcs 8
7
4.2 DCI saddle clump DN 250, PN 16 with gaskets & other if necessary. pcs 8
8
4.2 Flanged gate valve DN 300, PN 16 with gaskets & bolts + nuts. pcs 06
9
4.3 Flanged gate valve DN 250, PN 16 with gaskets & bolts + nuts. pcs 05
0
4.3 Flanged gate valve DN 200, PN 16 with gaskets & bolts + nuts. pcs 05
1
4.3 Flanged gate valve DN 150, PN 16 with gaskets & bolts + nuts. pcs 05
2
4.3 Flanged gate valve DN 80, PN 16 with gaskets & bolt. + Nuts. pcs 05
3
4.3 Flanged gate valve DN 50, PN 16 with gaskets & bolts + nuts. pcs 05
4
4.3 Flanged gate valve DN 125, PN 16 with gaskets & bolts + nuts. pcs 05
5
4.3 PVC flanged spigot DN50, PN10, internal Ø-63 mm with gaskets & pcs 05
6 other necessary.
4.3 PVC flanged spigot DN150, PN 10 with gasket, internal Ø-160 mm & pcs 05
7 other necessary.
4.3 PVC flanged spigot DN250, PN 10 with gasket, internal Ø-280 mm & pcs 05
8 other necessary.
4.3 PVC flanged spigot DN300, PN 10 with gasket, internal Ø-315 mm & pcs 05
9 other if necessary.
4.4 DCI flat gasket DN200, internal Ø-215mm. pcs 06
0
4.4 PVC Socket gasket DN50,PN 10 internal Ø-63mm. pcs 100
1
4.4 PVC Socket gasket DN80,PN 10 internal Ø-90mm. pcs 100
2
4.4 DCI Socket gasket DN100,PN 10 internal Ø-110mm. pcs 100
3
4.4 PVC flanged gasket DN200 , internal Ø-215mm. pcs 5
4
4.4 PVC flanged Socket DN50,PN 10 internal Ø-63mm. pcs 05
5
4.4 PVC flanged Socket DN100,PN 10 internal Ø-110mm. pcs 05
6
4.4 PVC flanged Socket DN200,PN 10 internal Ø-115mm. pcs 05
7
4.4 PVC flanged Socket DN250,PN 10 internal Ø-280mm. pcs 05
8
4.4 Dismantling DN 80, PN 16. pcs 05
9
4.5 Dismantling DN 150, PN 16. pcs 05
0
4.5 Floating Valve DN 300. pcs 04

84
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

1
4.5 Floating Valve DN 250. pcs 04
2
4.5 Floating Valve DN 100. pcs 04
3
6.4 Floating Valve DN 90. pcs 04
6.5 Flanged Check valve with gasket & bolt + nut DN125,PN 40 internal Ø- pcs 05
280mm.
6.6 Air release valve with integral flanged 1/2" PN 10/16, with gaskets & Pcs 10
bolts + nuts.
6.7 Better flay valve with hand weal DN 200, PN 16 Length 6cm & operated pcs 02
by hand wheal with all if necessary such as gasket, bolts & nus etc.
6.8 Flanged water meter (cold) DN 150mm, PN16, and B-class with gaskets, pcs 03
bolts & nuts. Nominal flow rate 150 m3 /hr. max 300 & minimum flow
rate Qmin iso 4.3m3/hr. Measuring range +5% real1.8 Measuring range
+2% real 4 transition flow rate Q+.
6.9 Flanged water meter (cold) DN 100mm, PN16 B-class, With gaskets,
bolts & nuts. Nominal flow rate 60m3/hr. Maximum flow rate 120 m3 pcs 03
/hr.& minimum flow rate Qmin iso 1.8m3/hr. Length 4.3cm horizontal
installation position with number of holes 8 in number & 6 digits.
7.0 Flanged water meter (cold) DN 200mm, PN16 B-class, with gaskets,
bolts & nuts size of 24. BS2789,EN1663 Standard flanged length of pcs 03
34cm & flanged Ø 145cm.
7.1 Flanged water meter (cold) DN 350mm, PN16 B-class, with gaskets,
bolts & nuts. Nominal flow rate 800m3 /hr. at length of 48.5 cm pcs 02
horizontal installation position.
7.2 Water truck with volume/capacity of 18-20 m3, As per attached pcs 01
specification
7.3 Smart UPS battery (uninterrupted power supply or power bank) for pcs 02
server model of R-720 waits for above 2hrs power saves.
8.3 Chain blocks 5 tones with belt. pcs 03
8.4 Chain blocks 10 tones with belt. pcs 03
8.5 Dice for Pipes threader 1/2"- 4 ". set 04
8.6 Vice (Morsa) for Pipes 1/2"- 4 " with chain. set 04
8.7 Flera complete box 2"- 1/2" set 04
8.9 HDPE Butt welding machine up to 315mm2 or greater. set 02
9.0 Grinder machine pcs 02
9.4 Flanged Check valve DN 125, PN- 40 With gaskets, individual bolts & pcs 04
nuts.
9.5 Pressure gauge PN 40 bar pcs 01
9.6 Flanged water meter DN 150mm ,PN 25 With gaskets, bolts & nuts. pcs 04
9.7 Floating Valve DN-25 with its necessary. set 01
9.8 Floating Valve DN-300 with its necessary. set 03
9.9 Flanged water meter DN350mm with gasket, bolt and nut. set 02
10. PVC Ball Valve or Gate valve plastic 3/4" with it’s necessary accessary.
0 set 10
11. Flanged water meter with gasket, bolt & nut, DN -150,PN-16 pcs 06
12. Flanged Check valve with gasket, bolt & nut, DN 125,PN 40 pcs 06
13. Flanged Check valve with gasket, bolt & nut, DN 80, PN 16. pcs 06
14. Pressure gauge 0 - 40 bar pcs 05

85
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

15 Dismantling Joint with gasket, bolt & nut, pcs 10


DN 150, PN 16.
16. Dis mantling Joint with gasket, bolt & nut, DN 100, PN 16. pcs 10
17. Flanged water meter DN 200, PN 16 with gasket, bolt and nut. pcs 05
18. Mechanical seal for vertical surface pump model of A96122033P10726 pcs 05
& with serial number of 0001.
19. Double flanged reducer with bolt & nut. 400 mm2-350mm2 pcs 05
22. Flanged water meter with gasket, bolt & nut, DN - 100, PN-16. pcs 06
23. Pressure gauge 0 - 40 bar. pcs 05
24. Air release valve with gasket, bolt & nut DN 200, Pn 16, 1/2". pcs 05
25. Mechanical seal for vertical surface pump model of A96122033P10726 pcs 05
& with serial number of 0001.
26. Double flanged reducer with gasket, bolt & nut. 400 mm2-350mm2 pcs 05
27 3” flanged water meter,PN16 pcs 4

28 2” FLANGED air relief valve pcs 1

29 125 mm HDPE SADLE CLAMP pcs 3

30 160 mm HDPE SADLE CLAMP pcs 10

31 3” flanged gate valve no 9


32 3” flanged check valve no 7

33 3” flanged air relief valve no 2

34 3” flanged GS Elbow no 3

Total cost
Vat 15%
Total cost including vat 15%

7.BOQ MECHANICAL AND ELECTRICL TOOLS, HDPE AND ARC WELDING MACHINE,
PIPE WRENCHS

S.NO Description unit QTY UNIT TOTAL PRICE


PRICE

1 Standard Mechanical and electrical tools with box Set 127

2 Arc welding machine 220-380volt Set 20

3 65-160mm2 HDPE welding machine with all accessories and set 70


compatible generator

4 90-315mm2 HDPE welding machine with all accessories and set 30

86
January 16, 2023 TIGRAY WATER AND ENERGY BUREAU

compatible generator

5 GI welding machine with all accessories and compatible set 10


generator

6 48” heavy duty pipe wrench pcs 50

7 36” heavy duty pipe wrench pcs 70

8 24” heavy duty pipe wrench pcs 94

9 12” heavy duty pipe wrench pcs 127

10 Pipe threader 1"- 2 ½ ". pcs 50

11 Pipe threader 2"- 4 ". pcs 50

Total Price

Vat 15%

Total price with vat 15%

87

You might also like