Professional Documents
Culture Documents
Instructions Ridges XS Square LeKrea
Instructions Ridges XS Square LeKrea
Instructions Ridges XS Square LeKrea
SUPPLIES YOU’LL NEED • 4 pieces of A4 paper and a printer (preferably 160 g/m.)
• Quickly drying glue
• A scissor and a pensil
• A 13x18 cm IKEA RIBBA frame or any other frame with a
visible area measuring 11.8x16.7cm.
1. GET THE OUTLINE RIGHT The 1st page in the pdf will work as the foundation for the
poster. This is the ‘template’ for the spikes’s positions that
you’ll glue them onto.
2. HOW TO FOLD Now you have to cut, fold and clue the spikes.
3 Add glue to the dashed flap and fold. Hold tight until
dry, and the spike can hold itself together.
Add glue to the three flaps at the bottom of the spike and
turn the spike until the side where the paper is joined, fac-
es down towards right and press the spike down onto the
outline paper.
GOOD TO KNOW • When folding the spikesmake sure you press the sides
with your nail or a bone folder. This will make the spike
stand out nice and sharp.