Professional Documents
Culture Documents
ASME Secc II D Appendix 7 Guidelines On Multiple Marking of
ASME Secc II D Appendix 7 Guidelines On Multiple Marking of
APPENDIX 7 98
The construction codes individually define what mate- Dual or multiple marking is not acceptable if two
rials may be used in boilers, vessels, and components or more specifications to which the material is marked
constructed in compliance to their rules. If a material have mutually exclusive requirements.
meets all of the requirements for a specification for This prohibition includes more than just chemistry
which it is marked, including documentation, if any, and property requirements. One example is SA-515
and if it meets all requirements for use imposed by and SA-516; the former requires melting to coarse
the construction code, it may be used. The construction grain practice while the latter requires melting to fine
codes, in general, do not address the case of materials grain practice. Another example is SA-213 TP304L
marked with more than one specification, grade, class, and TP304H; the carbon content ranges of these grades
or type, so these guidelines are offered for clarification. have no overlap.
713
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
STD.ASME SEC II-D-ENGL Ii978 W 0759b70 059093b 007 -
content meets the requirements of SA-240 321 [which which marking applies (specification, grade, class, type,
is Ti greater than 5 x (C + N) but less than 0.701. etc.), the designer must use all the design values
Another material, with identical composition, except appropriate for that selection and may not mix and
0.35% Ti, may be marked SA-240 304 because the Ti match values from any other specifications, grades,
content does not meet the minimum requirement for classes, types, etc., with which the material may be
321. The Ti content is just a residual. marked.
714
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services