Professional Documents
Culture Documents
Sep N
Sep N
Description
A well test separator is designed to separate, meter and
sample all elements or phases of the effluent.
Includes :
- Vessel 48" x 12.5' with manhole
- Removable cyclone inlet cluster
- Oil compartment with weir
- Inlet 4" full bore check valve
- Internal coating of vessel
- Flow measuring on oil by dual flowmeter, on water by one
flowmeter and on gas by one orifice meter (6")
- Set of orifices and 3 pen recorder
- Isolating valves on flow meters (upstream and downstream)
- Pneumatic control valves on oil and water outlets
- Two lateral stand pipes with oil and water level controllers
- Two pilot operated safety valves on vessel and one on the oil
inlet manifold together on an independent discharge line
- Bypass oil outlet/water outlet
- Flowing line between water and oil outlets with globe valve
- Sand jet line
- Skid mounted with full drip pan, protective frame and roof
protecting panel.
Specifications
Service : H2S
Working pressure : 1440 psi (100 bars) at 100° F
1345 psi (93 bars) at 212° F
Working temperature : -4° F to 212° F
Flow rate Gas : 90 MMSCFD at 1440 psi (2 500 000 m3 at 100 bar) and low liquid level
75 MMSCFD at 1440 psi ( 2 100 000 m3 at 100 bar) and high liquid level
Flow rate Liquid : 8200 BPD with 1 minute retention time and low liquid level (1300 m3/d)
16 500 BPD with 1 minute retention time and high liquid level (2600m3/d)
Connections
Inlet : 4” Fig. 602 Gas outlet : 4” Fig. 602 Oil outlet : 3” Fig. 602
Water outlet : 2” Fig. 602 PSV outlet : 6” 300 RF Sand jet line : 2” Fig. 602
Accessories (Optional)
Stand alone 4 l shrinkage tester SKT-D P-579041