Download as pdf or txt
Download as pdf or txt
You are on page 1of 39

HOME &

GARDEN RANGE
GRUNDFOS HOME & GARDEN RANGE

INDEX & QUICK SELECTION GUIDE


SOURCE APPLICATION SECTION PAGE SOURCE APPLICATION SECTION PAGE

Max.
HOME PRESSURE 5 DRAINAGE & particle
size 37
SYSTEMS WASTEWATER
Above Below Mains Household Mains Storm/ Clean Water Storm/Grey
Irrigation Clean Water
Pump Level Pump Level Water* Water Boosting* Grey Water Drainage Water Handling

SCALA2 6-7 UNILIFT CC 10 mm 38-39


CME BOOSTER 8-9 UNILIFT KP 10 mm 40-41
1
CME TWIN BOOSTER 10-11 UNILIFT AP 12 12 mm 42-43
CM BOOSTER SELF-PRIMING 12-13 UNILIFT AP 35 & 50 35/50 mm 44-45
5
SCALA1 14-15 UNILIFT AP 35B & 50B 35/50 mm 46-47
CM BOOSTER 16-17
CM BOOSTER PRESSURE SWITCH 18-19
JET PUMP RANGE 20-21
Grey Water Blackwater
Grey Water Blackwater
Handling Handling
HOME PRESSURE SYSTEMS ACCESSORIES
UNILIFT APG 40 mm 48-49
PRESSURE MANAGER 22-23 SOLOLIFT2 WC & CWC 50-51
PRESSURE TANK 2 24-25 SOLOLIFT2 D2 & C3 52-53
ACQUASAVER 26-27
DRAINAGE & WASTEWATER CONTROLLER

LC231 CONTROL UNIT 5 54

HOT WATER &


SUBMERSIBLE 55
29 HEATING
BOOSTERS
Above Below
Household
3 Hot Water
Hot Water
Boosting
Hot Water
Circulation
Heating
Pump Level Pump Level Irrigation
Water
(in tank) (in tank)
UPA N 56-57
SB 30-31
UP N 6 58-59
SBA 32-33
UPS 60-61
UPS N 62-63
COMFORT PM 64-65
ALPHA2 66-67
ALPHA2 N 68-69

WATER TRANSFER
4 PROTECTIONS & CONTROLS 70-71
Above Below
Pump Level Pump Level
Transfer
CONVERSION TABLES 72-73
7
NS 34-35 GRUNDFOS ECADEMY LEARNING 74
ORDERING & CONTACT DETAILS 76

*Local legislation may prohibit direct Mains Boosting or require the use of a Break Tank. Permits may need to be sought.
GRUNDFOS HOME & GARDEN RANGE

HOME PRESSURE SYSTEMS


2
The Grundfos Home Pressure System range provides a
complete selection of pumps for the supply and pressure
boosting of rainwater, whether it’s for whole of home supply YEAR
WARRANTY
or garden irrigation. Grundfos also have solutions for mains
boosting* if you are experiencing poor mains pressure.

RANGE AT A GLANCE

CME Booster/ CM Booster


CM Booster Jet Pump CME TWIN Pressure
SCALA2 Self-Priming SCALA1 Range Booster CM Booster Switch

Page 6 Page 12 Page 14 Page 20 Page 8/10 Page 16 Page 18

Water Source
Above Pump Below Pump Mains Above Pump Mains
Level Level Water* Level Water*

Application
Household Irrigation Mains
Water Boosting*

Self-Priming ● ● ● ●
Max. Suction Lift 8m 4m 8m 8m 1m 1m 1m
(8 m with foot valve) (with foot valve) (with foot valve) (with foot valve)

Max. Noise dB(A) 47 dB 55 dB 55 dB 81 dB 55 dB 55 dB 55 dB

Max. number of
4 Taps 7 Taps 5 Taps 5 Taps 7 Taps 7 Taps 7 Taps
open taps

Max. number of Double Storey Multi-Storey Multi-Storey Double Storey Multi-Storey Multi-Storey Multi-Storey
storeys Home Home Home Home Home Home Home

Composite/
Wetted Stainless Stainless Stainless Stainless
Composite Composite Stainless
Materials Steel Steel Steel Steel
Steel
PM1 (JP-PM)
Pressure Pressure
Auto Start/Stop Integrated PM1/PM2 Integrated Pressure PM1
Sensor Switch
Switch (JP-PT)

Anti-Cycling/
Integrated PM1/PM2 Integrated PM1 (JP-PM) PM1
Leak Detection

*Local laws or legislation may prohibit Mains Boosting


CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOME PRESSURE SYSTEMS

SCALA2 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA 7

ALL-IN-ONE, SELF-PRIMING BOOSTER


PERFORMANCE CURVE
WITH INVERTER TECHNOLOGY
WATER SOURCE APPLICATION

SCAN THE QR CODE


Above Below Mains Household Mains TO LINK TO GRUNDFOS
Pump Level Pump Level Water Irrigation
Water Boosting PRODUCT CENTER

The Grundfos SCALA2 is an intelligent, self-priming pump with


inverter technology that adjusts its performance according to
household water demand, eliminating pressure fluctuations and
resulting in lower running costs.

• Perfect pressure to all taps - Inverter technology (variable speed)


adjusts motor speed according to demand to deliver perfect
pressure to all taps

• For water sources below pump level - Designed with good


suction lift capabilities, the SCALA2 is able to draw water up to 8
metres vertically below the level of the pump
OPERATING CONDITIONS TECHNICAL DATA
• Whisper quiet operation - Super quiet operation that won’t
disturb your family or neighbours
Ambient Temperature 0°C to +55°C Power Supply Voltage 200-240 Volt, 50 Hz
• All-in-one construction - Tough, weather resistant outer casing
houses the pump, motor and the controller Power Supply Cable 2 m with plug
Liquid Temperature 0°C to +45°C
Enclosure Class Suitable for outdoor installation (IPX4D)
• Easy installation – plug & pump -
Simply connect the pump inlet and outlet Operating Pressure Max. 10 bar Approved for Drinking Water
to the pipework, prime the pump, plug into Approvals and Markings AS/NZS 4020
a power outlet and you’re ready to pump Sound Pressure Max. 47 dB C-Tick Compliance

• One-touch pressure adjustment -


The intuitive and intelligent control panel
allows for simple adjustment of the
pressure to the taps PHYSICAL ATTRIBUTES

PUMP NOISE PROTECTION & CONTROL*

SCALA2

SCALA2 CM Booster CME Booster Jet Pump C


Self-Priming Range
Auto Start/Stop  E
47 dB Max. 55 dB Max. 55 dB Max. 70 dB
D
Non-Return Valve 
PUMP SIZING
Dry Run Protection 
High pressure for double storey
dwellings and long runs of pipe
SCALA2 3-45 Anti-Cycling Protection  B A
Adequate pressure for most
single storey dwellings Alarm Indication LED 
Small Medium Power (kW) Connections Dimensions (mm) Weight
House House Model
Temperature LED  P1 / P2 Inlet Outlet A (l) B (w) C (h) D (inlet) E (outlet) (kg)
2-3 taps 3-4 taps
SCALA2 0.55 / 0.45 1” Male 1” Male 403 193 302 114 234 9
Taps are 15 l/min at 22.5 m head *For full explanation of Protection and Controls see page 69-70
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOME PRESSURE SYSTEMS

CME BOOSTER 2
YEAR
TECHNICAL & PERFORMANCE DATA 9
WARRANTY
CME Booster
PERFORMANCE CURVE
INDUSTRIAL QUALITY PRESSURE BOOSTER
WITH INVERTER TECHNOLOGY H
[m]

60
WATER SOURCE APPLICATION 20
50
10
40
SCAN THE QR CODE
0
Above Mains Household Mains 0.0 CMBE 5-62
Pump Level Water Water
Irrigation
Boosting
TO LINK TO GRUNDFOS 30
PRODUCT CENTER
CMBE 1-44 CMBE 3-62

The Grundfos CME Booster is an industrial quality, intelligent inverter 20


pump that adjusts its performance constantly according to household
water demand, eliminating pressure fluctuations and resulting in lower 10
running costs.
0
• Perfect pressure to all taps - Inverter technology (variable speed) 0.0 0.8 1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.2 Q [m3/h]
adjusts motor speed according to demand to deliver perfect pressure
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Q [l/s]
to all taps
0 20 40 60 80 100 120 Q [l/min]
• Low running costs - High efficiency motor keeps energy consumption
down and running costs low

• Industrial quality – Designed and built to suit industrial applications, OPERATING CONDITIONS TECHNICAL DATA
so easily handles larger domestic water supply or mains
boosting applications Power Supply Voltage 200-240 Volt, 50 Hz
Ambient Temperature 0°C to +55°C
• Quiet operation - Very quiet operation that won’t disturb your family Power Supply Cable 1.5 m with plug
or neighbours Liquid Temperature 0°C to +60°C
Undercover installation recommended
Enclosure Class
• Superior materials - Constructed of high quality (IP55)
industrial grade components. All parts in contact System Pressure Max. 10 bar
Approved for Drinking Water
with water are made from 304 stainless steel. AS/NZS 4020
Approvals and Markings
Sound Pressure Max. 55 dB C-Tick Compliance
• Reduced pump start/stops - The inbuilt pressure
tank (2l) minimises pump start/stop frequency

• One-touch pressure adjustment - The intuitive PHYSICAL ATTRIBUTES


and intelligent control panel allows for simple
adjustment of pressure to the taps

PUMP NOISE PROTECTION & CONTROL*


CME
Booster
CM Booster Jet Pump
SCALA2 Self-Priming CME Booster Range C
47 dB Max. 55 dB Max. 55 dB Max. 70 dB Auto Start/Stop 

E
PUMP SIZING Non-Return Valve 
D
Higher pressure for
CMBE CMBE CMBE CMBE
multi-level dwellings
1-44 1-44 3-62 5-62 Dry Run Protection 
and long runs of pipe
A B
High pressure
for double storey CMBE CMBE CMBE CMBE
dwellings and long 1-44 1-44 3-62 5-62 Adjustable Start Pressure 
runs of pipe Power (kW) Connections Dimensions (mm) Weight
Model
Adequate pressure P2 Inlet Outlet A (l) B (w) C (h) D (inlet) E (outlet) (kg)
CMBE CMBE CMBE CMBE
for most single storey Alarm Indication LED 
1-44 1-44 3-62 5-62
dwellings CMBE 1-44 0.55 1” Female 1” Female 326 217 440 75 200 16
Small Medium Large Large House CMBE 3-62 1.10 1” Female 1” Female 344 217 440 75 200 17
House House House + Irrigation Pressure Gauge 
2-3 taps 3-4 taps 4-5 taps 5-7 Taps CMBE 5-62 1.50 1 1/4 ” Female 1” Female 350 217 455 90 215 17

Taps are 15 l/min at 22.5 m head *For full explanation of Protection and Controls see page 69-70
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOME PRESSURE SYSTEMS

CME TWIN BOOSTER 2


YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA 11

INDUSTRIAL QUALITY PRESSURE BOOSTER PERFORMANCE CURVE


H
WITH INVERTER TECHNOLOGY [m]

100

WATER SOURCE APPLICATION 90

80
CMBE 3-93

70

SCAN THE QR CODE 60


Above Mains Household Mains
Irrigation TO LINK TO GRUNDFOS
Pump Level Water Water Boosting
PRODUCT CENTER 50
CMBE 3-62

40
The Grundfos CME Twin Booster consists of two CME Booster pumps
CMBE 5-62
mounted side-by-side on a common base plate, greatly increasing the 30

performance range over a single CME pump and providing back-up in 20


critical applications.
10

• Perfect pressure to all taps - Inverter technology (variable speed)


0
adjusts motor speed according to demand to deliver perfect 1 pump 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0
pressure to all taps
2 pumps 0 2.0 4.0 6.0 8.0 10 12 14 16

• Low running costs - Highest efficiency motor keeps energy


consumption and running costs low.
OPERATING CONDITIONS TECHNICAL DATA
• For larger multi-dwelling projects - Designed to suit large
multi-storey and multi-dwelling projects
Power Supply Voltage 200-240 Volt, 50 Hz
Ambient Temperature 0°C to +55°C
• Quiet operation - Very quiet operation that won’t disturb your
Power Supply Cable 2 x 1.5 m with plug
family or neighbours
Liquid Temperature 0°C to +60°C Undercover installation recommended
• Superior materials - Constructed of high quality industrial grade Enclosure Class
(IP55)
components. All parts in contact with water are
System Pressure Max. 10 bar
made from 304 stainless steel. Approved for Drinking Water
Approvals and Markings AS/NZS 4020
• Reduced pump start/stops - The inbuilt pressure Sound Pressure Max. 55dB C-Tick Compliance
tank (2l) minimises pump start/stop frequency

• One-touch pressure adjustment - The intuitive


and intelligent control panel allows for simple
adjustment of the pressure to the taps PHYSICAL ATTRIBUTES

PUMP NOISE PROTECTION & CONTROL*


CME Twin
Booster C
SCALA2 CM Booster CME Twin Booster Jet Pump
Self-Priming Range Auto Start/Stop  E
47 dB Max. 55 dB Max. 55 dB Max. 70 dB
D
Non-Return Valve 
F
ACCESSORIES Dry Run Protection 

Connection kit includes 40 mm


B A
pipework, suction and discharge Adjustable Start Pressure 
manifolds and is supplied complete
with isolation ball valves, non return Power (kW) Connections Dimensions (mm) Weight
Model
valves on suction and barrel unions for Alarm Indication LED  P2 Inlet Outlet A (l) B (w) C (h) D (inlet) E (outlet) F (kg)
quick connection.
CMBE TWIN 3-62 1.10 1” Female 1” Female 344 475 485 110 235 344 40
Pressure Gauge  CMBE TWIN 3-93 1.50 1” Female 1” Female 404 475 495 125 250 404 44
CMBE TWIN 5-62 1.50 1 1/4 ” Female 1” Female 350 475 495 125 250 350 45

*For full explanation of Protection and Controls see page 69-70


CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOME PRESSURE SYSTEMS

CM BOOSTER 2
YEAR
TECHNICAL & PERFORMANCE DATA
SELF-PRIMING
WARRANTY 13
PERFORMANCE CURVE
INDUSTRIAL QUALITY, SELF-PRIMING PRESSURE BOOSTER H
[m]
H
[m]
CMB-SP 1 & CMB-SP 3 CMB-SP 5
WATER SOURCE APPLICATION 60
50

50
40

40
Above Below Mains Household Mains 30
Irrigation SCAN THE QR CODE
Pump Level Pump Level Water Water Boosting TO LINK TO GRUNDFOS 30
PRODUCT CENTER CMB-SP 3-56 CMB-SP 5-47
CMB-SP 1-36 20
The Grundfos CM Booster Self-Priming is an industrial quality pump 20
CMB-SP 3-47
CMB-SP 3-37
designed for delivering rainwater or boosting mains water pressure
CMB-SP 3-28 CMB-SP 5-28
into the home from above or below ground tanks. 10
10

• For water sources above or below pump level - 0 0


Designed with good suction lift capabilities, the CM Booster 0.0 0.8 1.6 2.4 3.2 4.0 4.8 Q [m3/h] 0.0 1 2 3 4 5 6 7 Q [m3/h]
Self-Priming is able to draw water up to 4 metres vertically
below the level of the pump (up to 8 metres with the 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Q [l/s] 0.0 0.4 0.8 1.2 1.6 Q [l/s]

installation of a foot valve) 0.0 10 20 30 40 50 60 70 80 Q [l/min] 0.0 20 40 60 80 100 Q [l/min]

• Automated control and ongoing protection - The robust


Pressure Manager controller features the highest level of
customisable protection and automated pump control OPERATING CONDITIONS TECHNICAL DATA
• Industrial quality - Designed and built to suit industrial
Power Supply Voltage 220-240 Volt, 50 Hz
applications, so easily handles larger domestic water supply Ambient Temperature -20°C to +55°C
or mains boosting tasks Power Supply Cable 1.2 m with plug
Liquid Temperature 0°C to +60°C
• Quiet operation - Very quiet operation that won’t disturb your Undercover installation recommended
Enclosure Class
family or neighbours (IP55)
System Pressure Max. 10 bar
Approved for Drinking Water
• Superior materials - Constructed of high quality industrial
Approvals and Markings AS/NZS 4020
grade components. All parts in contact with water are Sound Pressure Max. 55 dB
constructed from 304 stainless steel. C-Tick Compliance

• Easy installation - plug & pump - Simply connect the pump


inlet and outlet to the pipework, prime the pump, plug into a PHYSICAL ATTRIBUTES
power outlet and you’re ready to pump

PUMP NOISE PROTECTION & CONTROL*


CMB-SP CMB-SP
with PM1 with PM2
SCALA2 CM Booster CME Booster Jet Pump C&E
Self-Priming Range
Auto Start/Stop  
47 dB Max. 55 dB Max. 55 dB Max. 70 dB
Non-Return Valve  
D
PUMP SIZING
Dry Run Protection  
Higher pressure A B
for multi-level CMB-SP CMB-SP CMB-SP CMB-SP Anti-Cycling Protection  
dwellings and 3-56 3-56 5-47 5-47
long runs of pipe Motor Power Connections Dimensions (mm) Weight
Alarm Indication LED   Model
High pressure P2 (kW) Inlet Outlet (PM) A (l) B (w) C (h) D (inlet) E (outlet) (kg)
CMB-SP CMB-SP
for double storey CMB-SP CMB-SP
3-47 3-47
dwellings and 5-47 5-47 Max. Continuous Run Time (30 Mins)  CMB-SP 1-36 0.50 1” Female 1” Male 377 158 317 75 317 15
1-36 3-37
long runs of pipe
CMB-SP 3-28 0.50 1” Female 1” Male 377 158 317 75 317 15
Adequate pressure Adjustable Start Pressure 
CMB-SP CMB-SP CMB-SP CMB-SP
for most single CMB-SP 3-37 0.50 1” Female 1” Male 377 158 317 75 317 15
1-36 3-28 5-28 5-28
storey dwellings
Pressure Indicator  CMB-SP 3-47 0.50 1” Female 1” Male 413 158 317 75 317 16
Large
Small Medium Large
House + CMB-SP 3-56 0.67 1” Female 1” Male 453 158 317 75 317 17
House House House
Irrigation
2-3 taps 3-4 taps 4-5 taps Automatic Restart 
5-7 Taps CMB-SP 5-28 0.50 1” Female 1” Male 377 158 317 75 317 15

Taps are 15 l/min at 22.5 m head CMB-SP 5-47 0.90 1” Female 1” Male 453 158 317 75 317 18
*For full explanation of Protection and Controls see page 69-70
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 5.2 Q [m³/h]

CLICK TO GO BACK TO CONTENTS 0 6.7 13.3 20 26.7 33.3 40 46.7 53.3 60 66.7 73.3 80 86.7 Q [l/min] Lor
P1 P1
[hp]
1.4
[W]
1000
GRUNDFOS HOME PRESSURE SYSTEMS

2
1.2

SCALA1
800
1.0
0.8 600

YEAR
WARRANTY TECHNICAL & PERFORMANCE DATA 0.6
0.4
400

200
15
0.2
0.0 0
ALL-IN-ONE, SELF-PRIMING BOOSTER 50 Hz PERFORMANCE CURVE
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 5.2 Q [m³/h]

WITH BLUETOOTH® CONNECTIVITY


H H H H
[m] [ft] [m] [m]
WATER SOURCE APPLICATION 40
SCALA1 3-35 180 55 SCALA1 5-55
SCALA1 3-35
50 Hz 35 50 Hz
50 60 Hz
160
35
45 30
140
30 40
120 25
35
25
100 30 20
Above Below Mains Household Mains SCAN THE QR CODE
Pump Level Pump Level Water Irrigation 20
Water Boosting TO LINK TO GRUNDFOS 25
80
PRODUCT CENTER 15
15 20
60
15 10
10
The Grundfos SCALA1 is an all-in-one, self-priming pump with 40
10
built-in Bluetooth® connectivity, making it simple to install, 5 20 5
5

customise, control and troubleshoot using the Grundfos GO App. 0 0 0 0


0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 5.2 Q [m³/h] 7.03.6Q [m³/h]
• For water sources below pump level - Designed with good 0.0 0.5 1.00.0 1.5 2.0
0.4 2.5
0.8 3.01.2 3.5 1.64.0 4.5
2.0 5.02.4 5.5 2.86.0 6.5
3.2 4.0 Q [m³/h]
suction lift capabilities, the SCALA1 is able to draw water up to 0 6.7 13.3 20 26.7 33.3 40 46.7 53.3 60 66.7 73.3 80 86.7 Q [l/min] 0 8.3 16.7 0 25 33.3
2 41.7 50 58.3 66.7 75 83.3 91.7 100 108.3 116.7 Q [l/min]
8 metres vertically below the level of the pump P1 P1
[hp] [W] [hp] [W]
1400
• Quiet operation - Super quiet operation that won’t disturb your 1.0
800 1.8
1.6 1200 1.0
800

family or neighbours 0.8 600 1.4 1000 0.8 600


0.6 OPERATING CONDITIONS 1.2 TECHNICAL
800 0.6
DATA
400
• All-in-one construction - Tough, weather resistant outer casing 0.4
1.0
0.8 600 0.4
400

houses the pump, motor and the controller 0.2


200
0.6 400
200
Ambient Temperature 0°C to +55°C 0.4 Power
0.2Supply Voltage 230 Volt, 50 Hz
0.0 0 200 0.0 0
• Easy installation – plug & pump - Simply connect the pump inlet 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 5.2 Q [m³/h] Power Supply Cable
0.0 0.5 2.0
0.4 1.00.0 1.5 2.5
0.8 1.5 m with plug
3.01.2 3.5 1.64.0
4.5
2.0 5.02.4 5.5 2.86.0 6.5
3.2 7.03.6Q [m³/h]
4.0 Q [m³/h]
and outlet to the pipework, prime the pump, plug into a power Liquid Temperature 0°C to +45°C
outlet and you’re ready to pump Enclosure Class Suitable for outdoor installation (IPX4D)
H H H
[m]
System Pressure Max. 8 bar [ft] [m]
• Simple to operate and monitor - Seamlessly connect Approved for Drinking Water
45 SCALA1 3-45 SCALA1 3-45
to your SCALA1 using the Bluetooth connected 50 Hz Approvals 45
and Markings AS/NZS 4020
140 60 Hz
Grundfos GO App. Sound Pressure
40 Max. 55 dB 40 C-Tick Compliance
120
35 35
• Twin Booster - For higher flow demand SCALA1 30 100 30
can be easliy be setup as a twin booster. SCALA1 Twin Booster
25
Duty assist and duty standby modes available. with manifold and 80 25

Base plate, manifolds, communication cable base plate PHYSICAL ATTRIBUTES


20
60
20

and fixing screws available as an accessory kit. 15 15


40
10 10

5 20
5

PUMP NOISE PROTECTION & CONTROL* 0 0 0


0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 5.2 Q [m³/h] 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 Q [m³/h]

0 6.7 13.3 20 26.7 33.3 40 46.7 53.3 60 66.7 73.3 80 86.7 Q [l/min] Lorem ipsum 0 2 4 6 8 10 12 14 16 18 20 Q [US GPM]
P1 P1 P1 P1

C
[hp] [W] [hp] [W]
SCALA1
SCALA2 SCALA1 Jet Pump 1.4 1000 1.4

E
1000
Range 1.2 1.2
800 800
1.0 1.0

D
47 dB Max. 55 dB Max. 70 dB Max. 0.8 600 0.8 600
Auto Start/Stop 
0.6 400 0.6 400
0.4 0.4
200 200
0.2 0.2
Non-Return Valve  0.0 0 0.0 0
PUMP SIZING 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 5.2 Q [m³/h] 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 Q [m³/h]

Higher pressure for Dry Run Protection  A B


multi-level dwellings SCALA1 5-55 H H H H
and long runs of pipe [ft] [m] [ft] [m]

Anti-Cycling Protection
180 55
Power (kW)
SCALA1 5-55
Connections 180 55 Dimensions (mm) SCALA1 5-55
Weight
High pressure for double 
Model 50 Hz 60 Hz
storey dwellings and long SCALA1 3-35 SCALA1 3-35 SCALA1 5-55 160
50
P1 / P2 Inlet Outlet A (l) B (w) 160
50
C (h) D (inlet) E (outlet) (kg)
runs of pipe 45 45
140 140
Adequate pressure for most Alarm Indication LED  SCALA1
40 3-35 0.72 / 0.45 1” Male 1” Male 466 202 40 316 171 263 12
single storey dwellings
SCALA1 3-35 SCALA1 3-35 SCALA1 5-55 120 120
SCALA1
35 5-55 1.20 / 0.78 1” Male 1” Male 466 200 35 316 171 263 14
100
Small Medium Large 30 100 30
Grundfos GO Bluetooth® connectivity 
House House House 80 25 80 25
2-3 taps 3-4 taps 4-5 taps 20 20
60 60
15 15
Taps are 15 l/min at 22.5 m head *For full explanation of Protection and Controls see page 69-70 40 40
10 10
20 5 20 5

0 0 0 0
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOME PRESSURE SYSTEMS

CM BOOSTER 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA 17

DOMESTIC PRESSURE BOOSTER PERFORMANCE CURVE

H
[m]

60
WATER SOURCE APPLICATION
50

40
SCAN THE QR CODE
Above Mains Household Mains
Water
Irrigation
Boosting
TO LINK TO GRUNDFOS 30
Pump Level Water PRODUCT CENTER
CM Booster 5-46
20
CM Booster 3-37
The Grundfos CM Booster is designed for delivering rainwater CM Booster 1-36
10
or boosting mains water pressure into the home from above
ground tanks. 0
0.0 0.8 1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.2 Q [m3/h]
• Automated control and ongoing protection - The robust
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Q [l/s]
Pressure Manager controller provides a basic level of pump
control and protective features 0 20 40 60 80 100 120 Q [l/min]

• Industrial quality - Designed and built to suit industrial


applications, so easily handles larger domestic water
supply or mains boosting tasks OPERATING CONDITIONS TECHNICAL DATA
• Quiet operation - Very quiet operation that won’t disturb
your family or neighbours Ambient Temperature 0°C to +55°C Power Supply Voltage 220-240 Volt, 50 Hz

• Easy installation – plug & pump - Connect the pump inlet


Power Supply Cable 1.2 m with plug
and outlet to the pipework, prime the pump, plug into a Liquid Temperature 0°C to +60°C
power outlet and you’re ready to pump Undercover installation recommended
Enclosure Class
(IP55)
• Heavy duty construction - Constructed from heavy duty System Pressure Max. 10 bar
cast iron and stainless steel components Approved for Drinking Water
Approvals and Markings AS/NZS 4020
Sound Pressure Max. 55dB
C-Tick Compliance

PUMP NOISE PROTECTION & CONTROL* PHYSICAL ATTRIBUTES


CM
Booster
SCALA2 CME Booster CM Booster Jet Pump with PM1
Range
47 dB Max. 55 dB Max. 55 dB Max. 70 dB Max.
Auto Start/Stop 

PUMP SIZING C&E


Higher pressure
CM CM Non-Return Valve 
for multi-level
Booster Booster
dwellings and
5-46 5-46
long runs of pipe
High pressure
CM CM CM CM Dry Run Protection 
D
for double storey
Booster Booster Booster Booster
dwellings and
1-36 3-37 5-46 5-46
long runs of pipe
Adequate pressure CM CM CM CM
Anti-Cycling Protection 
A B
for most single Booster Booster Booster Booster
storey dwellings 1-36 3-37 5-46 5-46
Large Connections Dimensions (mm)
Small Medium Large Motor Power Weight
House + Model
House House House Alarm Indication LED  P2 (kW) (kg)
Irrigation Inlet Outlet A (l) B (w) C (h) D (inlet) E (outlet)
2-3 taps 3-4 taps 4-5 taps
5-7 Taps
CMB 1-36 0.50 1” Female 1” Male 323 158 301 75 301 14
Taps are 15 l/min at 22.5 m head *For full explanation of Protection and Controls see page 69-70 CMB 3-37 0.50 1” Female 1” Male 323 158 301 75 301 14
CMB 5-46 0.90 1 ¼” Female 1” Male 381 158 301 75 301 15
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOME PRESSURE SYSTEMS

CM BOOSTER 2
YEAR
TECHNICAL & PERFORMANCE DATA
PRESSURE SWITCH
WARRANTY 19
CM-PS
PERFORMANCE CURVE
DOMESTIC AND LIGHT INDUSTRIAL PRESSURE BOOSTER p H
[kPa] [m]
WITH PRESSURE SWITCH 1000
100

90
WATER SOURCE APPLICATION 800
80
CMB 5-93
70
600 60 CMB 5-75
SCAN THE QR CODE
TO LINK TO GRUNDFOS
Above Mains Household Mains PRODUCT CENTER
50
Irrigation CMB 5-56
Pump Level Water Water Boosting
400 40
CMB 10-47
CMB 5-47
30
The Grundfos CM Booster Pressure Switch is designed for delivering
200 20
rainwater or boosting mains water pressure in larger domestic, light CMB 1-36 CMB 3-37
industrial or commercial applications. 10

0 0
• Industrial quality - Designed and built to suit industrial 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Q [m3/h]
applications, so easily handles larger domestic water supply
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Q [l/s]
or mains boosting tasks
0 20 40 60 80 100 120 140 160 180 200 220 240 Q [l/min]
• Quiet operation - Very quiet operation that won’t disturb your
family or your neighbours
OPERATING CONDITIONS TECHNICAL DATA
• Basic start/stop control built-in - Comes with a five way valve,
pressure gauge, pressure switch and incorporated
non-return valve Ambient Temperature -20°C to +50°C Power Supply Voltage 220-240 Volt, 50 Hz

1.5 m with plug


• Superior materials - Constructed of high quality industrial Power Supply Cable
Liquid Temperature 0°C to +60°C (1.90 kW version has 15 Amp plug)
grade components. All parts in contact with water are made
from 304 stainless steel Enclosure Class Requires covered installation (IP44)
System Pressure Max. 10 bar
• Reduced pump start/stops - Approved for Drinking Water
The addition of a pressure tank minimises Approvals and Markings AS/NZS 4020
Sound Pressure Max. 55 dB
pump start/stop frequency for reduced C-Tick Compliance
noise and increased comfort

PHYSICAL ATTRIBUTES

PUMP NOISE PROTECTION & CONTROL*


CM Booster
Pressure Switch
CM Booster Jet Pump
SCALA2 CME Booster E C
Pressure Switch Range
47 dB Max. 55 dB Max. 55 dB Max. 70 dB Max.

Non-Return Valve  D
PUMP SIZING
Higher pressure
for multi-level CM-PS CM-PS CM-PS B A
dwellings and 5-47 5-47 5-47
long runs of pipe
High pressure Pressure Gauge  Motor Power Connections Dimensions (mm) Weight
Model
for double storey CM-PS CM-PS CM-PS CM-PS P2 (kW) Inlet Outlet A (l) B (w) C (h) D (inlet) E (outlet) (kg)
dwellings and 1-36 3-37 5-47 5-47
long runs of pipe CMB 1-36 0.50 1” Female 1” Female 323 158 255 75 208 14
Adequate pressure
CM-PS CM-PS CM-PS CM-PS CMB 3-37 0.50 1” Female 1” Female 323 158 255 75 208 14
for most single
1-36 3-37 5-47 5-47
storey dwellings CMB 5-47 0.90 1 ¼” Female 1” Female 381 158 255 75 208 17
Large Auto Start/Stop by Pressure Switch 
Small Medium Large CMB 5-56 1.30 1 ¼” Female 1” Female 469 178 270 90 223 24
House +
House House House
Irrigation CMB 5-75 1.30 1 ¼” Female 1” Female 505 178 270 90 223 24
2-3 taps 3-4 taps 4-5 taps
5-7 Taps
CMB 5-93 1.90 1 ¼” Female 1” Female 539 178 270 90 223 27
Taps are 15 l/min at 22.5 m head *For full explanation of Protection and Controls see page 69-70 CMB 10-47 1.90 1 ¼” Female 1 1/2” Female 450 199 323 100 261 30
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOME PRESSURE SYSTEMS

JET PUMP RANGE 2


YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA 21

DOMESTIC SELF-PRIMING JET PUMP PERFORMANCE DATA

Pressure - H[m]/psi
Model 10/15 12.5/18 15/22 17.5/25 20/29 22.5/33 25/36 27.5/40 30/44 32.5/47 35/51 37.5/54 40/58 42.5/62 45/65
WATER SOURCE APPLICATION Flow - l/min
JP 3-42 52 51 51 47 39 31 24 18 13 9
JP 4-47 69 65 63 60 50 41 33 26 20 14 10
JP 4-54 68 66 65 63 62 60 52 43 36 29 24 19 14
SCAN THE QR CODE
Above Below Mains Household Mains TO LINK TO GRUNDFOS JP 5-48 87 87 87 86 86 85 83 71 61 51 42 34 25 16 9
Irrigation
Pump Level Pump Level Water Water Boosting PRODUCT CENTER

OPERATING CONDITIONS TECHNICAL DATA


The Grundfos Jet Pump range comprises three configurations, JP
Pump Only
all built on the robust self-priming Grundfos JP Pump. Ambient Temperature 0°C to +40°C Power Supply Voltage 220-240 Volt, 50 Hz

• For water sources above and below pump level - Liquid Temperature 0°C to +40°C (Intermittent use to 55°C) Power Supply Cable 1.5 m with plug
Designed with good suction lift capabilities, the pump is
System Pressure Max. 6 bar Undercover installation
able to draw water up to 8 metres vertically from below Enclosure Class
recommended (IP44)
the level of the pump
JP 3-42: Max. 68 dB
JP 4-47: Max. 70 dB Approved for Drinking Water
• Excellent value for money - Ideal for small to medium Sound Pressure
JP 4-54: Max. 74 dB Approvals and Markings AS/NZS 4020
household use
JP 5-48: Max. 81 dB C-Tick Compliance
• Built to last - Constructed of corrosion resistant composite
and stainless steel components
JP PT PHYSICAL ATTRIBUTES - JP PERFORMANCE CURVE
• Automated control and ongoing protection - The Pressure Jet Pump with pressure tank
and switch P H
Manager controller provides a basic level of pump control kPa [m]

A
and protective features. 600 60 –

550 55 –

• Easy installation – plug & pump - Connect the pump inlet 500 50 –

and outlet to the pipework, prime the pump, plug into a

C
450 45 –

E
power outlet and you’re ready to pump

D
400 40 –

350 35 –

B 300 30 –

250 25 –

Motor Connections Dimensions (mm) Weight 200 20 –


JP PM Model Power
(kg)
P2 (kW) Inlet Outlet A (l) B (w) C (h) D (inlet) E (outlet) 150
Jet Pump with Pressure Manager controller 15 –

JP 3-42 0.42 1” Female 1” Male 405 186 278 147 200 8 100 10 –

50 5–
JP 4-47 0.56 1” Female 1” Male 405 186 278 147 200 9
3-42 4-47 4-54 5-48
0 0–
JP 4-54 0.75 1” Female 1” Male 424 186 278 147 200 11 Q m3/h
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
PUMP NOISE PROTECTION & CONTROL* JP 5-48 1.01 1” Female 1” Male 424 186 278 147 200 13 0 10 20 30 40 50 60 70 80 90 100 Q l/m

CM Booster Jet Pump JP JP PT JP PM PHYSICAL ATTRIBUTES - JP PT PHYSICAL ATTRIBUTES - JP PM


SCALA2 CME Booster
Self-Priming Range
A
47 dB Max. 55 dB Max. 55 dB Max. 70 dB Max. Auto Start/Stop  

PUMP SIZING Non-Return Valve  

C&E
C

High pressure for double


storey dwellings and long JP 4-54 Dry Run Protection 

D
runs of pipe JP 3-42 JP 5-48

E
D

Adequate pressure for most B


JP 4-47
single storey dwellings Anti-Cycling Protection 
A B

Small Medium Large Motor Connections Dimensions (mm) Motor Connections Dimensions (mm)
House House House Weight Weight
Model Power Model Power
2-3 taps 3-4 taps 4-5 taps Alarm Indication LED  P2 (kW) Inlet Outlet A B C D E (kg) P2 (kW) Inlet Outlet A B C D E (kg)
(l) (w) (h) (inlet) (outlet) (l) (w) (h) (inlet) (outlet)
JP 3-42 PT-V 0.42 1” Female 1” Female 423 284 635 147 248 15 JP 3-42 PM1 0.42 1” Female 1” Male 405 186 390 147 390 11

JP 4-47 PT-V 0.56 1” Female 1” Female 423 284 635 147 248 16 JP 4-47 PM1 0.56 1” Female 1” Male 405 186 390 147 390 12

Taps are 15 l/min at 22.5 m head JP 4-54 PT-V 0.75 1” Female 1” Female 442 284 635 147 248 18 JP 4-54 PM1 0.75 1” Female 1” Male 424 186 390 147 390 12
*For full explanation of Protection and Controls see page 69-70
JP 5-48 PT-V 1.01 1” Female 1” Female 442 284 635 147 248 19 JP 5-48 PM1 1.01 1” Female 1” Male 424 186 390 147 390 15
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOME PRESSURE SYSTEMS ACCESSORIES

PRESSURE 2
YEAR
TECHNICAL & PERFORMANCE DATA

MANAGER
WARRANTY PRESSURE LOSS 23
H
[m]
9
AUTOMATIC PUMP CONTROLLER 8
PM 1
7
PM 2
The Grundfos Pressure Managers PM1 and PM2 are 6
intelligent pump controllers that make an excellent
5
addition to your domestic pressure pump, providing SCAN THE QR CODE
TO LINK TO GRUNDFOS
control automation and ongoing protection. PRODUCT CENTER 4

3
PRESSURE MANAGER PM1
The PM1 will automatically start and stop the pump 2

when outlets are turned on or off. The PM1 offers a 1


basic level of pump protection, preventing
0
dry-running and anti-cycling protection, which helps 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Q [l/min]
with detecting system leaks or dripping taps.
0 1 2 3 4 5 6 7 8 Q [m3/h]

PRESSURE MANAGER PM2 0 0.5 1.0 1.5 2.0 Q [l/s]


The PM2 will automatically start and stop the pump
when outlets are turned on or off. It includes the same
pump protections as the PM1 but also has the option
to prevent the pump from running continuously for OPERATING CONDITIONS TECHNICAL DATA
more than 30 minutes.
Ambient Temperature 0°C to +50°C PM1 - 220-240 Volt, 50/60 Hz – 10A Max
The PM2 also offers a greater level of control, allowing Power Supply Voltage
PM2 - 220-240 Volt, 50/60 Hz – 10A Max
the user to adjust the starting pressure. Liquid Temperature 0°C to +40°C
Undercover installation recommended
PM1-1.5: 1.5 bar Enclosure Class
(IP65)
Starting Pressure PM1-2.2: 2.2 bar
PM2 1.5-5: 1.5 – 5 bar adjustable
Approved for Drinking Water
Approvals and Markings
System Pressure Max. 10 bar AS/NZS 4020

PROTECTION & CONTROL*


PHYSICAL ATTRIBUTES

Pressure Manager Pressure Manager


PM1 PM2

Power On Indicator LED  

Pump On Indicator LED  

Alarm LED  
C E
Auto Start/Stop  

Non-Return Valve  

Dry Run Protection  


B
Anti-Cycling Protection  

Internal Pressure Tank 


A D
Max. Continuous Run Time (30 Min.) 
Connections Dimensions (mm)
Adjustable Start Pressure  Model
Inlet Outlet A (l) B (w) C (h) D (inlet) E (outlet)
Pressure Indication  PM 1-1.5 1” Male 1” Male 165 12 120 143 171
PM 1-2.2 1” Male 1” Male 165 12 120 143 171
Automatic Restart 
PM 2-1.5-5 1” Male 1” Male 175 12 120 143 171

*For full explanation of Protection and Controls see page 69-70


CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOME PRESSURE SYSTEMS ACCESSORIES

PRESSURE TANKS 5
YEAR
WARRANTY
TECHNICAL DATA
SIZE RANGE 8.6 BAR
PIPE MOUNTED AND FREE STANDING 25
PRESSURE TANKS Model Capacity Litres
Nominal
Connections
Dimensions (mm)
Mounting Type
Draw-off Litres Height Diameter
GT-C-60 PN8.6 G1 V 60 24 1” Male 660 430 Free Standing
The Grundfos range of pressure tanks are perfect for all types of
domestic and industrial applications in conjunction with a wide range GT-C-80 PN8.6 G1 V 80 32 1” Male 860 430 Free Standing
of pressure boosting pumps. GT-C-130 PN8.6 G1 V 130 51 1” Male 1240 430 Free Standing
GT-C-250 PN8.6 G1 V 250 99 1 1/4” Male 1310 560 Free Standing
The addition of a pressure tank minimises energy costs and extends
SCAN THE QR CODE
pump life by greatly reducing the start/stop cycling frequency and TO LINK TO GRUNDFOS
PRODUCT CENTER
protects pipework against water hammer. SIZE RANGE 10 BAR
Nominal Dimensions (mm)
Model Capacity Litres Connections Mounting Type
Draw-off Litres Height Diameter
GT-H-2 PN10 G1 V 2 0.8 1” Male 183 127 Pipe
GT-H-8 PN10 G1 V 8 3 1” Male 311 203 Pipe
GT-H-18 PN10 G1 V 18 7 1” Male 366 279 Pipe
GT-H-60 PN10 G1 V 60 24 1” Female 528 388 Free Standing
GT-H-80 PN10 G1 V 80 32 1” Female 626 388 Free Standing
GT-H-100 PN10 G1 V 100 40 1” Female 804 430 Free Standing
GT-D-130 PN10 G1 V 130 51 1” Female 1101 406 Free Standing
GT-D-200 PN10 G1¼ V 200 79 1 1/4” Female 1042 534 Free Standing
GT-D-240 PN10 G1¼ V 240 95 1 1/4” Female 967 634 Free Standing
GT-D GT-D-300 PN10 G1¼ V 300 118 1 1/4” Female 1575 533 Free Standing
GT-D-450 PN10 G1¼ V 450 178 1 1/4” Female 1505 660 Free Standing

SIZE RANGE 16 BAR


Nominal Dimensions (mm)
GT-U Model Capacity Litres Connections Mounting Type
GT-C GT-H Draw-off Litres Height Diameter
GT-H-18 PN16 G1 V 18 7 1” Male 366 279 Pipe
GT-H-80 PN16 G1 V 80 32 1” Female 787 388 Free Standing
GT-U+-200 PN16 G1¼ V 200 79 1 1/4” Male 1120 590 Free Standing
GT-H / GT-D GT-C
• Industrial grade - Steel tank with UV resistant epoxy • Corrosion Proof - Composite, corrosion proof materials
outer coating. Superior polypropylene liner and inside and out. The strong fibre-wound outer shell
rubber diaphragm. is engineered to withstand harsh environmental SIZE RANGE 25 BAR
conditions. Nominal Dimensions (mm)
• Trusted performance - Every tank is individually factory Model Capacity Litres Connections Mounting Type
tested guaranteeing perform from day one • Longer life - The reinforced diaphragm material Draw-off Litres Height Diameter
provides longer service life UMB-100LV PN25 G1 V 100 40 1” Female 983 453 Free Standing
• Long life - All pipework connections are high grade
stainless steel • Trusted performance - Every tank is individually factory
tested guaranteeing perform from day one OPERATING CONDITIONS TECHNICAL DATA
• Easy installation - All free standing tanks come with a
tanks stand for stability and ease of pump connection
• Easy to maintain - Air valve is located at the top of the GT-U+ Approved for Drinking Water
tank for easy maintenance • Industrial grade - All the industrial grade features of AS/NZS 4020
the GTH tanks with the added benefit of a replaceable Approvals and Markings
WorkSafe certified (80 - 450 Litre Tanks)
tank diaphragm
• Long life - With appropriate maintenance the GT-U+ GT-C: 0°C to +50°C WaterMark Approved (2 - 60 Litre Tanks)
will provide many years of trouble-free service GT-U: 0°C to +70°C
Liquid Temperature
GT-H: 0°C to +90°C
GT-D: 0°C to +90°C Enclosure Class Undercover installation recommended
HOSE KITS FOR FREE STANDING TANKS
Connection hoses are available for Model Hose Diameter Hose Length Pre-charge should be set at 10% less
Fixed Speed Pump
pressure tanks that are not directly than cut-in setting
Flexible Braided Stainless Steel Hose Kit 25 mm 25 mm 650 mm
connected to the pump via a Pre-charge should be set at 30% less
connection pipe. Flexible Braided Stainless Steel Hose Kit 25 mm 25 mm 1500 mm Variable Speed Pump
than set point
Flexible Braided Stainless Steel Hose Kit 32 mm 32 mm 1500 mm
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOME PRESSURE SYSTEMS ACCESSORIES

TECHNICAL & PERFORMANCE DATA


ACQUASAVER PRESSURE LOSS

RAINWATER / MAINS WATER CHANGEOVER DEVICE ¾” / 20 mm 1” / 25 mm 27


600 50
300 50
Flow vs. Pressure curve – Mains Inlet Flowvs.
Flow vs.Pressure
Pressurecurve
curve––Mains
Pump Inlet
Inlet Flow vs. Pressure curve – Pump Inlet
ACQUASAVER is a fully automatic rainwater / mains water changeover 35
45
500 250
device, designed for pressure pump supply systems, harvesting 40
30
rainwater for toilet, laundry and other household applications and

Pressure Loss (kPa)


Pressure Loss (kPa)

Pressure Loss (kPa)


400 35

Pressure Loss (kPa)


200
requiring mains water backup. 25 30
300 150
20 25
• Simple and reliable hydraulic operation makes
20
ACQUASAVER maintenance free 200
15
100
15
10
• No electronic components, so no running costs 100 50
10

5 5
• Robust solid brass construction 0 0 0
0
10 15 20 25 30 35 40 45 30 50 70 35 75 10 20 30 40 50 60 70 75 80 90 100
10
10 20 15 20 40 25 6030 4080 90
45 10050
• Built-in dual back-flow prevention valves Flow Rate (L/min) Flow Rate (L/min)
FlowFlow
RateRate (L/min)
(L/min)
• Space saving and simple to install 600 5
50300
Flow vs. Pressure curve – Mains Inlet Flow
Flow vs.vs. Pressure
Pressure curve
curve – Mains
– Pump Inlet
Inlet 4
35
500 250
4
INSTALLATION EXAMPLE

Pressure Loss (kPa)


30

Pressure Loss (kPa)

Pressure Loss (kPa)


3
400 200

Pressure Loss (kPa)


To House Mains Water In 25 3

300 150 2
20
AcquaSaver Valve 2
15100
ACQUASAVER 1”/25 mm 200 15

10 10
50
Rainwater Tank 100
5
0
0
0 10 20 30 40 50 60 70 75 80 90 100
10 15 20 25 30 35 40 45
10 15 20 25 30 35 40 45 50
Flow Rate (L/min) Flow
FlowRate
Rate(L/min)
(L/min)

1" Pipe
OPERATING CONDITIONS TECHNICAL DATA

Acquasaver 20 mm: 0oC to +40oC


Liquid Temperature
Acquasaver 25 mm: 0oC to +50oC
WaterMark Approved
Acquasaver 20 mm: Max. 5 bar
Max. Mains Pressure
Acquasaver 25 mm: Max. 10 bar
Approvals and Markings
Acquasaver 20 mm: Max. 6 bar
Max. Pump Pressure
Submersible Pump Acquasaver 25 mm: Max. 6 bar
with built in controller
Acquasaver 20 mm: 50 l/min
ACQUASAVER 3/4”/20 mm Max. Flow Rate
Acquasaver 25 mm: 100 l/min

PHYSICAL ATTRIBUTES

¾” / 20 mm 1” / 25 mm
A A

ACQUASAVER 3/4”/20 mm ACQUASAVER 1”/25 mm

Max. flow rate from outlet 50 l/min 100 l/min


B B

Connections Dimensions (mm)


Model Inlet Inlet
Outlet A (l) B (h)
Mains Water Rainwater
ACQUASAVER 20 mm 3/4” Female 1” Female 3/4” Female 150 105
ACQUASAVER 25 mm 1” Female 1” Female 1” Female 210 148
GRUNDFOS HOME & GARDEN RANGE

SUBMERSIBLE BOOSTERS
2
The Grundfos Submersible Booster Pump range
provides options to supply harvested rainwater
into the home from both above and below ground YEAR
WARRANTY
water sources.

RANGE AT A GLANCE

SB SBA

Page 30 Page 32

Water Source
Above Pump Below Pump
Level Level

Application
Household Irrigation
Water

Auto Start/Stop
Auto Start/Stop Manual Control
with Pressure Switch

Max. Noise dB(A) 25 dB 25 dB

Max. number of
5 Taps 5 Taps
open taps

Double Storey Double Storey


Max. number of storeys
Home Home

Stainless Steel/ Stainless Steel/


Wetted Materials
Composite Composite

Float Switch/ Yes Yes


Dry Run Protection As standard As standard
CLICK TO GO BACK TO CONTENTS
GRUNDFOS SUBMERSIBLE BOOSTERS

SB 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
SUBMERSIBLE BOOSTER PERFORMANCE CURVE

H
[m] 31
45
SB 3-45
WATER SOURCE APPLICATION 40
35

30 SB 3-35

25
SCAN THE QR CODE
Above Below Household
Irrigation TO LINK TO GRUNDFOS 20
Pump Level Pump Level Water PRODUCT CENTER
15
10

The Grundfos SB is a compact, submersible booster pump 5


designed for the delivery of clean rainwater for domestic 0
use. 0.0 20 40 60 80 100 Q [l/min]

• Start/stop float switch control - The included float 0.0 0.4 0.8 1.2 1.6 Q [l/s]
switch will stop the pump if the water source runs
dry and re-start when sufficient water is added 0.0 1 2 3 4 5 6 Q [m3/h]

• Virtually silent submerged operation - Won’t disturb


your family or neighbours OPERATING CONDITIONS TECHNICAL DATA
• Easy submerged installation – plug & pump - SB-A with float switch
Liquid Temperature 0°C to +40°C Power Supply Voltage 220-240 Volt, 50 Hz
Connect the pump outlet to the pipework, plug into
a power outlet and you’re ready to pump Power Supply Cable 15 m with plug
Max. Installation Depth 10 m
• For water sources above or below ground - Designed Enclosure Class Suitable for submerged installation (IP68)
to be submerged in either above ground water tanks pH value of pumped liquid 4-9 Approved for Drinking Water
or below ground water sources Approvals and Markings AS/NZS 4020
Sound Pressure Max. 25 dB C-Tick Compliance
• Floating suction strainer option - Available with
standard suction strainer or optional floating suction
strainer, which takes in water from the surface
where it is likely to be cleaner PHYSICAL ATTRIBUTES
SB-AW with floating suction strainer and float switch
SB A SB AW

PUMP NOISE PROTECTION & CONTROL*

SCALA2 CM Booster Jet Pump


SB Self-Priming Range
C C C
25 dB Max. 47 dB Max. 55 dB Max. 70 dB Max. SB SBA
C
A A A A

Auto Start/Stop via Pressure Switch 


PUMP SIZING

High pressure for B B B B


double storey dwellings SB 3-45 SB 3-45
and long runs of pipe Non-Return Valve 
Adequate pressure Power (kW) Connections Dimensions (mm) Weight
for most single storey SB 3-35 SB 3-35 SB 3-45 Model
P1 / P2 Inlet Outlet A (h) B (w) C (outlet) (kg)
dwellings
Small Medium Large Stainless Steel
Dry Run Protection via Float Switch   SB 3-35 A 0.80 / 0.54 ¾“ or 1” Female 390 150 536 9
House House House Strainer
2-3 taps 3-4 taps 4-5 taps
SB 3-35 AW 0.80 / 0.54 Floating Strainer ¾“ or 1” Female 528 150 621 10

Taps are 15 l/min at 22.5 m head *For full explanation of Protection and Controls see page 69-70 Stainless Steel
SB 3-45 A 1.05 / 0.62 ¾“ or 1” Female 415 150 584 10
Strainer

SB 3-45 AW 1.05 / 0.62 Floating Strainer ¾“ or 1” Female 553 150 646 11


CLICK TO GO BACK TO CONTENTS
GRUNDFOS SUBMERSIBLE BOOSTERS

SBA 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
SUBMERSIBLE BOOSTER WITH INTEGRATED PERFORMANCE CURVE
PRESSURE SWITCH H
[m] 33
45
SBA 3-45
WATER SOURCE APPLICATION 40
35
SBA 3-35
30
25
SCAN THE QR CODE
Above Below Household 20
Irrigation TO LINK TO GRUNDFOS
Pump Level Pump Level Water
PRODUCT CENTER
15
10

The Grundfos SBA is a compact, submersible booster pump with 5


integrated pressure switch designed for the delivery of clean 0
rainwater into the home. 0.0 20 40 60 80 100 Q [l/min]

• Easy submerged installation – plug & pump - Connect the 0.0 0.4 0.8 1.2 1.6 Q [l/s]
pump outlet to the pipework, plug into a power outlet and
you’re ready to pump 0.0 1 2 3 4 5 6 Q [m3/h]

• Automated control and ongoing protection - An integrated


pressure switch and float switch provide pump control and OPERATING CONDITIONS TECHNICAL DATA
protective features.

• Virtually silent submerged operation - Won’t disturb your Liquid Temperature 0°C to +40°C Power Supply Voltage 220-240 Volt, 50 Hz
family or neighbours
Power Supply Cable 15 m with plug
Max. Installation Depth 10 m
• For water sources above or below ground - Designed to be Enclosure Class Suitable for submerged installation (IP68)
submerged in either above ground water tanks or below
pH value of pumped liquid 4-9 Approved for Drinking Water
ground water sources
Approvals and Markings AS/NZS 4020
Sound Pressure Max. 25 dB C-Tick Compliance

PHYSICAL ATTRIBUTES

PUMP NOISE PROTECTION & CONTROL*

SCALA2 CM Booster Jet Pump


SBA Self-Priming Range
25 dB Max. 47 dB Max. 55 dB Max. 70 dB Max.
C
SB SBA
A

Auto Start/Stop via Pressure Switch 


PUMP SIZING

High pressure for


double storey dwellings SBA 3-45 SBA 3-45
and long runs of pipe Non-Return Valve 

Adequate pressure
for most single storey SBA 3-35 SBA 3-35 SBA 3-45 B
dwellings
Small Medium Large Dry Run Protection via Float Switch   Connections Dimensions (mm)
House House House Power (kW) Weight
Model
2-3 taps 3-4 taps 4-5 taps P1 / P2 Inlet Outlet A (h) B (w) C (outlet) (kg)
Stainless Steel
Taps are 15 l/min at 22.5 m head *For full explanation of Protection and Controls see page 69-70 SBA 3-35 A 0.80 / 0.54 ¾“ or 1” Female 528 150 621 9
Strainer
Stainless Steel
SBA 3-45 A 1.05 / 0.62 ¾“ or 1” Female 553 150 646 10
Strainer
CLICK TO GO BACK TO CONTENTS
GRUNDFOS WATER TRANSFER

NS 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
PERFORMANCE CURVE
WATER TRANSFER PUMP
H H H H
[kPa] [m] [kPa] [m]
22
700 210
70
21
200
650 20

WATER SOURCE APPLICATION


65
NS 5-60 190 NS 30-18
35
19
600 180
60
18
170
550 17
55
160
16
500 150
50
15
140
450 14
45
130
13
SCAN THE QR CODE 400
NS 3-40
40 120
Above Below TO LINK TO GRUNDFOS 12
Transfer
Pump Level Pump Level PRODUCT CENTER 350
110
11
35
100
10
300 30
NS 5-33
90 9
80 8
250 25
The Grundfos NS pump range has been NS 4-23
70 7
200
designed with medium to large scale water 20 60 6

50 5
transfer purposes in mind. It is perfect for 150 15
40 4

lowering water levels and transferring water 100 10 30 3

quickly between dams or tanks. 50 5


20 2

10 1

0 0
After priming and the addition of a foot valve,
0 0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Q [l/s]
0 1 2 3 4 5 6 7 8 9 10 11 Q [l/s]

the NS is capable of suction lift of up to 6 0 1 2 3 4 5 6 7 8 9 Q [m3/h] 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 Q [m3/h]

metres.

• Rugged construction - Hard-wearing OPERATING CONDITIONS TECHNICAL DATA


cast iron construction, treated against
corrosion to ensure extra long life
Power Supply Voltage 220-240 Volt, 50 Hz
Ambient Temperature 0°C to +40°C
• Move water around quickly - Perfect for 2 m (10A Plug) : NS 3-40, 4-23, 5-33
moving water between dams or tanks Power Supply Cable
-10°C to +50°C : NS 3-40, 4-23, 5-33 2 m (15A Plug) : NS 30-18, 5-60
over long distances or vertically up to 60 Liquid Temperature
-15°C to +110°C : NS 5-60, 30-18
metres Undercover installation recommended
Enclosure Class
Max. 6 bar: NS 3-40, 4-23, 5-33, 30-18 (IP44/IP55)
System Pressure
NS Single Impeller Max. 8 bar: NS 5-60
Approved for Drinking Water
Approvals and Markings AS/NZS 4020
Sound Pressure Max. 55 dB
C-Tick Compliance

PHYSICAL ATTRIBUTES

NS 3-40, 4-23, 5-33 & 5-60 NS 30-18


A B A

C&E

C&E
D
D

Power (kW) Connections Dimensions (mm) Weight


Model
P1 / P2 Inlet Outlet A (l) B (w) C (h) D (inlet) E (outlet) (kg)
NS Twin Impeller
NS 3-40 1.20 / 0.75 1” Female 1” Female 362 180 235 100 235 15
NS 4-23 0.65 / 0.37 1” Female 1” Female 275 160 205 85 205 10
NS 5-33 1.30 / 0.75 1” Female 1” Female 330 185 235 100 235 15
NS 5-60 2.70 / 1.85 1 ¼” Female 1” Female 370 210 268 118 268 25
NS 30-18 1.85 / 1.85 2” Female 2” Female 430 200 270 105 270 23
GRUNDFOS HOME & GARDEN RANGE

DRAINAGE & WASTEWATER


The Grundfos range of submersible drainage pumps can help you move water

2
from where it’s not wanted, such as emptying tanks, ponds and pools, and can also
handle domestic grey water and storm water.
YEAR
WARRANTY
The Grundfos range of lifting stations and grinders allow you to install bathroom
and other wet area facilities in locations that are remote from the main sewer.
There are a range of options available to handle any combination of plumbing
fixtures and appliances.

RANGE AT A GLANCE

UNILIFT UNILIFT UNILIFT UNILIFT UNILIFT UNILIFT UNILIFT UNILIFT SOLOLIFT2


CC KP AP12 AP35 AP50 AP35B AP50B APG Range

Page 38 Page 40 Page 42 Page 44 Page 44 Page 46 Page 46 Page 48 Page 50-53

Water Source
Storm/ Storm/ Blackwater Grey Water
Clean Water Grey Water
Grey Water

Application
Clean Water Storm/Grey Water Storm/Grey Water Blackwater Grey Water
Drainage Handling Handling Handling Handling

Max. Particle Size 10 mm 10 mm 12 mm 35 mm 50 mm 35 mm 50 mm 40 mm -

Max. Height 6m 5m 10 m 7m 7m 7m 11 m 22 m 6m

Max. Horizontal 30 m 35 m 445 m 327 m 384 m 226 m 163 m 940 m 90 m

Min. Water 55 mm/


100 mm 100 mm 100 mm 100 mm 270 mm 270 mm - -
Level Suction 3 mm

Pump Stainless Stainless Stainless Stainless Stainless Stainless Stainless/


Composite Composite
Materials Steel Steel Steel Steel Steel Steel Cast Iron

Float
Float Switch Vert. Float Float Float
Float Float Float Float -
Options Float No Float No Float No FLoat
No Float
CLICK TO GO BACK TO CONTENTS
GRUNDFOS DRAINAGE & WASTEWATER

UNILIFT CC 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
PERFORMANCE CURVE
SUBMERSIBLE DRAINAGE PUMP

WATER SOURCE APPLICATION

39
SCAN THE QR CODE
Storm/ Clean Water Storm/Grey
Clean Water TO LINK TO GRUNDFOS
Grey Water Drainage Water Handling
PRODUCT CENTER

The Grundfos UNILIFT CC is a submersible drainage pump ideal for all


types of storm water and grey water handling around the home.

• Able to pump down to just 3 mm of water - Can pump down to


a water level of just 3 mm after removing the strainer, making it
perfect for draining pools, ponds or tanks
for maintenance

• Suitable for fully or partially submerged use - Comes with an


integrated motor cooling jacket, allowing the pump to operate for OPERATING CONDITIONS TECHNICAL DATA
extended periods whilst only partially submerged

• High quality - Constructed of corrosion resistant composite and Liquid Temperature 0°C to +40°C Power Supply Voltage 220-240 Volt, 50 Hz
stainless steel components inside and out
Max. Particle Size 10 mm Power Supply Cable 5 m/ 10 m with plug
• Light weight - At a weight of no more than 7 kg, the UNILIFT CC can
be used in either a permanent installation or as a portable Suitable for submerged installation
Max. Installation Depth 10 m Enclosure Class
drainage pump (IP68)

• Easy submerged installation – plug & pump - Connect the pump Down to 3 mm
Minimum Pumping Level Approvals and Markings C-Tick Compliance
(after removal of strainer)
outlet to the pipework, plug into a power outlet and you’re ready
to pump
pH value of pumped liquid 4 to 9 Impeller Type Semi-open

PHYSICAL ATTRIBUTES MINIMUM PIT DIMENSIONS UNILIFT CC


PUMP SIZING MAXIMUM PARTICLE SIZE
UNILIFT UNILIFT UNILIFT UNILIFT UNILIFT UNILIFT
CC 5 CC 7 CC 9 UNILIFT
CC AP 12 AP 35 & AP 35B AP50 & AP50B

400 mm - Side Discharge


570 mm - Top Discharge
32 mm pipework 32 mm pipework 32 mm pipework
0.8 l/sec flow rate 0.8 l/sec flow rate 0.8 l/sec flow rate

Vertical Height Maximum Horizontal Pipe Length

10 mm 12 mm 35 mm 50 mm
6m 3m A
D

5m 8m PROTECTION & CONTROL*


UNILIFT E
CC
4m 14 m
Auto Start/Stop by Float Switch 
B 500 mm
3m 8m 19 m C
Non-Return Valve 
2m 6m 16 m 24 m
Motor Cooling Jacket 
Power (kW) Connections Dimensions (mm) Weight
Model
1m 30 m 25 m 29 m P1 / P2 Outlet (Top) Outlet (Side) A (h) B (w1) C (w2) D (outlet 1) E (outlet 2) (kg)
Automatic Restart 
UNILIFT CC 5 0.25 / 0.10 ¾“, 1” or 1 ¼” Male 1 ¼ “ Female 306 160 238 270 90 5
Flow based on at least 1 m/sec velocity *For full explanation of Protection and Controls see page 69-70 UNILIFT CC 7 0.38 / 0.17 ¾“, 1” or 1 ¼” Male 1 ¼ “ Female 306 160 238 270 90 5
UNILIFT CC 9 0.78 / 0.47 ¾“, 1” or 1 ¼” Male 1 ¼ “ Female 342 160 238 308 90 7
CLICK TO GO BACK TO CONTENTS
GRUNDFOS DRAINAGE & WASTEWATER

UNILIFT KP 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
PERFORMANCE CURVE
SUBMERSIBLE STAINLESS STEEL DRAINAGE PUMP

WATER SOURCE APPLICATION

41
Storm/ Clean Water Storm/Grey SCAN THE QR CODE
Clean Water TO LINK TO GRUNDFOS
Grey Water Drainage Water Handling
PRODUCT CENTER

The Grundfos UNILIFT KP is a highly durable submersible pump


constructed from stainless steel, making it ideal for all types of
grey water and storm water handling around the home and in
light industrial applications.

• High corrosion resistance - Constructed of high quality


industrial grade components. All parts in contact with
water are made from 304 stainless steel.

• Options for confined areas - A vertical Niro Float Switch OPERATING CONDITIONS TECHNICAL DATA
option is available for installation into confined pits where
a regular float may not operate properly
Liquid Temperature 0°C to +50°C Power Supply Voltage 220-240 Volt, 50 Hz
• Suitable for fully or partially submerged use - Comes
with an integrated motor cooling jacket, allowing the
pump to operate for extended periods whilst only partly Max. Particle Size 10 mm Power Supply Cable 5 m with plug
submerged
Suitable for submerged installation
Max. Installation Depth 10 m Enclosure Class
• Light weight and portable - At a weight of no more than (IP68)
7 kg the UNILIFT KP can be used in either a permanent
installation or as a portable drainage pump Minimum Pumping Level Down to 100 mm Approvals and Markings C-Tick Compliance

• Easy submerged installation – plug & pump - Connect pH value of pumped liquid 4 to 9 Impeller Type Semi-open
the pump outlet to the pipework, plug into a power outlet
and you’re ready to pump

PUMP SIZING MAXIMUM PARTICLE SIZE PHYSICAL ATTRIBUTES MINIMUM PIT DIMENSIONS UNILIFT KP - NORMAL/VERTICAL FLOAT

UNILIFT UNILIFT UNILIFT UNILIFT


UNILIFT KP UNILIFT UNILIFT KP AP 12 AP 35 & AP 35B AP50 & AP50B
150 KP 250 KP 350
D
‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ ‹ ‹

32 mm pipework 32 mm pipework 32 mm pipework


‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • •
‹ ‹ • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹ • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • •
‹ ‹ • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ • • • • • •
‹ ‹ ‹ ‹ • • • • • •
‹ ‹ ‹ ‹ • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹ ‹ ‹ • • • •
• • • • • • • • • • • • • •
‹ ‹ ‹ ‹ • • • • • • • • • •
‹ ‹ ‹ ‹ ‹‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹‹ ‹ ‹ • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹‹ ‹ • • • • • •
‹ ‹ ‹ ‹ • • • • • • • • • • • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • •
‹ ‹
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • • • • • •
‹ ‹ ‹ ‹ • • • • • •
‹ ‹‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ • • • • • • • •
‹ ‹ • • • •

1.4 l/sec flow rate 1.4 l/sec flow rate 2.0 l/sec flow rate
‹‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • •
‹ ‹ • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • • • • • •
• • • • • • • • • •
‹ ‹
‹ ‹ • • • • • •
• •
‹ ‹ • •
‹ ‹ • • • •
‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹ • •
• • • •
‹ ‹ • •
‹ ‹
• • • •
‹ ‹ ‹ ‹
‹ ‹
‹ ‹ • •
‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹
• • • •
‹ ‹ ‹ ‹ ‹ ‹ • • • •
‹ ‹ • •
‹ ‹ • •
‹ ‹
‹ ‹ • •
• • • •
‹ ‹ • •
‹ ‹ ‹ ‹
‹ ‹
• •
‹ ‹ ‹ ‹
• •
‹ ‹ • •

‹ ‹ ‹ ‹ ‹ ‹
• • • • • • • •
• •
• •
‹ ‹ ‹ ‹ ‹ ‹
‹ ‹
• • • •
‹ ‹
‹ ‹ • •
‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • •
‹ ‹ • • • • • •
• •
‹ ‹ ‹ ‹
• • • •
‹ ‹
‹ ‹ • • • •
‹ ‹
• •

‹ ‹ • •

‹ ‹ ‹ ‹ • •
• •

‹ ‹ ‹ ‹ • • • •
‹ ‹ ‹ ‹ • •
‹ ‹ • •
‹ ‹ • •
‹ ‹ • •
‹ ‹ • •

A
‹ ‹ • •
‹ ‹ ‹ ‹ • •
‹ ‹ • • • •
• •
‹ ‹
‹‹‹‹‹‹‹‹ ‹‹‹‹‹‹‹‹ ‹ ‹ •


‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹ ‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹
‹ ‹ ‹ ‹ • •
‹ ‹ • • • •
‹ ‹ • • • •
‹ ‹ ‹ ‹ • •
‹ ‹ • • • •
‹ ‹ ‹ ‹ ‹ ‹
• •

‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹ ‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹
• • • • • •

10 mm 12 mm 35 mm 50 mm
‹ ‹ ‹ ‹
‹ ‹
• • • • • •
‹ ‹ ‹ ‹ • • • •
‹ ‹ • •
‹ ‹ ‹ ‹
• •

‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹ ‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹‹
• • • •
‹ ‹ ‹ ‹ ‹ ‹ • •
‹ ‹ • • • •
‹ ‹ ‹ ‹
‹ ‹
‹ ‹ • • • •
‹ ‹ • •
• •

400 mm
400 mm
‹ ‹ • • • •
‹ ‹ • • • •

400 400
mmmm
• •
‹ ‹ ‹ ‹ ‹ ‹ • • • •
‹ ‹ ‹ ‹ • •
• • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ • •
• • • •
‹ ‹
• • • •

H
‹ ‹ ‹ ‹ • •
• •
‹ ‹ • • • •
• • • •

Vertical Height Maximum Horizontal Pipe Length


• •
‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ • • • • • • • •
• •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • •
‹ ‹ • •
‹ ‹ • •
‹ ‹ • • • • • •
‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹
• •
• •
‹ ‹ ‹ ‹ • • • •
‹ ‹ ‹ ‹ • •
‹ ‹ • • • •
‹ ‹
‹ ‹ ‹ ‹ • • • •
‹ ‹ ‹ ‹ • • • •
‹ ‹ ‹ ‹
• • • •
‹ ‹ ‹ ‹ ‹ ‹ • • • •
‹ ‹
‹ ‹ ‹ ‹
‹ ‹ • •
‹ ‹ • •
‹ ‹ ‹ ‹ • •
‹ ‹
‹ ‹ ‹ ‹
• • • •
‹ ‹ • • • • • •

‹ ‹ ‹ ‹ • •
‹ ‹
• • • •
• •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • •
‹ ‹ • •
• • • • • •
‹ ‹ • •
‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹ • •
• •
‹ ‹ ‹ ‹ ‹ ‹ • •
‹ ‹
‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ • •
‹ ‹ • •
• • • •
‹ ‹ ‹ ‹
‹ ‹
‹ ‹ ‹ ‹ ‹ ‹
• • • •
• • • •
‹ ‹ • •
‹ ‹ ‹ ‹ • •
‹ ‹ • •
‹ ‹ ‹ ‹ • •
• • • •
‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹ • •
‹ ‹ • •
‹ ‹ • • • •
‹ ‹ ‹ ‹ • •
‹ ‹
‹ ‹ ‹ ‹ • •
• • • •
‹ ‹ • • • •
• • • •
‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹ • • • •
‹ ‹
‹ ‹ • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ ‹ ‹
• • • • • •
‹ ‹ • • • •
‹ ‹ ‹ ‹ • •
• •
• • • •
‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹ • • • •
‹ ‹
‹ ‹ ‹ ‹ • • • •
‹ ‹ • •
‹ ‹ ‹ ‹ ‹ ‹ • •
‹ ‹
• •

PROTECTION & CONTROL*


‹ ‹ • • • • • •
‹ ‹ • •
• • • •
‹ ‹
‹ ‹ • •
‹ ‹ • • • •
‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ • •
‹ ‹ • •
• •
‹ ‹ ‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹ • •
• • • •
‹ ‹ • • • •
• • • • • •
‹ ‹ ‹ ‹
• • • • • • • •
‹ ‹ • •
• • • •
‹ ‹ ‹ ‹ ‹ ‹ • •
‹ ‹ ‹ ‹ • •
• • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • •
‹ ‹
‹ ‹ • •
‹ ‹ • •
‹ ‹ • • • • • •

5m 1m 5m
‹ ‹ ‹ ‹ • • • • • • • • • • • • • • • • • •
‹ ‹ ‹ ‹ • • • • • •
• • • • • • • • • • • •

UNILIFT UNILIFT
• • • • • • • • • • • •
‹ ‹ • • • • • • • • • • • •
‹ ‹ • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • • • • • • • • • • • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • • • • • •
• • • • • •• • • • • • • •• • • • • • • •• • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • • • • • • • • • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹

B
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ • • • • • •• • • • • •• • • • • •
‹ ‹ ‹ ‹ ‹ ‹ • • • • • •
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹‹ ‹ ‹

‹ ‹‹ ‹ ‹

‹ ‹‹ ‹ ‹


‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹
‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹

KP KP
(No Float) (Float) 250 mm
250 mm
4m 10 m 9m C 350B350
mmBmm

Auto Start/Stop by Float Switch 


3m 18 m 13 m
Motor Power P2 Connection Dimensions (mm) Weight
Non-Return Valve  Model
(kW) Outlet A (h) B (w1) C (w2) D (outlet) (kg)
2m 9m 26 m 17 m
Motor Cooling Jacket   UNILIFT KP 150 0.30 1 ¼” Female 225 140 149 31 7
1m 17 m 35 m 22 m
UNILIFT KP 250 0.48 1 ¼” Female 225 140 149 31 7
Automatic Restart  
UNILIFT KP 350 0.70 1 ¼” Female 235 140 149 31 7
Flow based on at least 1 m/sec velocity *For full explanation of Protection and Controls see page 69-70
CLICK TO GO BACK TO CONTENTS
GRUNDFOS DRAINAGE & WASTEWATER

UNILIFT AP 12 2
YEAR
TECHNICAL & PERFORMANCE DATA
HEAVY DUTY, SUBMERSIBLE STAINLESS STEEL GREY WATER PUMP
WARRANTY PERFORMANCE CURVE

WATER SOURCE APPLICATION

43
Storm/ Clean Water Storm/Grey SCAN THE QR CODE
Clean Water TO LINK TO GRUNDFOS
Grey Water Drainage Water Handling
PRODUCT CENTER

The Grundfos UNILIFT AP 12 is a heavy duty, submersible pump


constructed from stainless steel, making it ideal for all types of
grey and storm water handling around the home and in light
industrial applications.

• Highly corrosion resistant - Constructed of high quality


industrial grade components. All parts in contact with the
pumped liquid are made from 304 stainless steel

• Suitable for fully or partially submerged use - Comes with OPERATING CONDITIONS TECHNICAL DATA
an integrated motor cooling jacket, allowing the pump
to operate for extended periods whilst only partially
Single phase: 220-240 Volt, 50 Hz
submerged Liquid Temperature 0°C to +55°C (70°C for 2 mins) Power Supply Voltage
Three phase: 380-400 Volt, 50 Hz
• Permanent or portable use - Can be used in either a 10 m with plug (Single Phase)
Max. Particle Size 12 mm Power Supply Cable
permanent installation or as a portable drainage pump No plug (Three Phase)

• Float switch options - Available with or without float Suitable for submerged installation
Max. Installation Depth 7m Enclosure Class
(IP68)
switch to suit different installation configurations

• Easy submerged installation – plug & pump - Connect Minimum Pumping Level Down to 100 mm Approvals and Markings C-Tick Compliance
the pump outlet to the pipework, plug into a power outlet
and you’re ready to pump pH value of pumped liquid 4 to 10 Impeller Type Semi-open

PUMP SIZING MAXIMUM PARTICLE SIZE PHYSICAL ATTRIBUTES MINIMUM PIT DIMENSIONS UNILIFT AP 12
B
UNILIFT AP UNILIFT AP UNILIFT AP UNILIFT AP UNILIFT UNILIFT UNILIFT UNILIFT
12 40.04 12 40.06 12 40.08 12 50.11 CC/KP AP 12 AP 35 & AP 35B AP50 & AP50B

50 mm pipework 50 mm pipework 50 mm pipework 65 mm pipework


2.5 l/sec flow rate 3.0 l/sec flow rate 3.5 l/sec flow rate 4.5 l/sec flow rate

Min. 600
Vertical
Maximum Horizontal Pipe Length
Height
10 m 15 m 10 mm 12 mm 35 mm 50 mm
9m 7m 63 m A
8m 10 m 33 m 111 m
PROTECTION & CONTROL* UNILIFT UNILIFT
7m 4m 44 m 59 m 158 m
AP 12 AP 12
6m 51 m 78 m 85 m 206 m (No Float) (Float)
Min. ø550
5m 99 m 112 m 111 m 254 m Auto Start/Stop by Float Switch 
4m 146 m 146 m 137 m 302 m
Non-Return Valve 
3m 193 m 180 m 163 m 350 m Power (kW) Connection Dimensions (mm) Weight
Model
Motor Cooling Jacket   P1 / P2 Outlet A (h) B (w) (kg)
2m 240 m 215 m 189 m 398 m
UNILIFT AP 12.40.04 0.70 / 0.40 1 1/2” Female 321 216 11
1m 287 m 249 m 215 m 445 m Automatic Restart  
UNILIFT AP 12.40.06 0.90 / 0.60 1 1/2” Female 321 216 11

Flow based on at least 1 m/sec velocity UNILIFT AP 12.40.08 1.30 / 0.80 1 1/2” Female 346 216 13
*For full explanation of Protection and Controls see page 69-70
UNILIFT AP 12.50.11 1.70 / 1.10 2” Female 357 241 15
CLICK TO GO BACK TO CONTENTS
GRUNDFOS DRAINAGE & WASTEWATER

UNILIFT AP 35 & 50 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
HEAVY DUTY, SUBMERSIBLE STAINLESS STEEL GREY WATER PUMP PERFORMANCE CURVE

WATER SOURCE APPLICATION

45
Storm/ Storm/Grey UNILIFT AP 35 UNILIFT AP 50
Grey Water Water Handling SCAN THE QR CODE SCAN THE QR CODE
TO LINK TO GRUNDFOS TO LINK TO GRUNDFOS
PRODUCT CENTER PRODUCT CENTER

The Grundfos UNILIFT AP 35 and AP 50 are heavy duty, submersible


pumps constructed from stainless steel, making them ideal for handling
dirty stormwater runoff, domestic wastewater from bathroom basins or
showers and fibrous laundry wastewater.

• Highly corrosion resistant - Constructed of high quality industrial


grade components. All parts in contact with the pumped liquid are
made from 304 stainless steel

• Handles very dirty water with ease - Can both easily pump large
particles in storm water run off or material fibres in laundry OPERATING CONDITIONS TECHNICAL DATA
grey water

• Suitable for fully or partially submerged use - Come with an


Liquid Temperature 0°C to +55°C Power Supply Voltage 220-240 Volt, 50 Hz
integrated motor cooling jacket, allowing the pump to operate for
extended periods whilst only partly submerged
AP 35 (35 mm)
Max. Particle Size Power Supply Cable 10 m with plug
AP 50 (50 mm)
• Float switch options - Available with or without float switch to suit
different installation configurations Suitable for submerged installation
Max. Installation Depth 7m Enclosure Class
(IP68)
• Permanent or portable use - The UNILIFT AP35 and 50 can be used in
either a permanent installation or as a portable drainage pump Minimum Pumping Level Down to 100 mm Approvals and Markings C-Tick Compliance

• Easy submerged installation – plug & pump - Connect the pump


outlet to the pipework, plug into a power outlet and you’re ready pH value of pumped liquid 4 to 10 Impeller Type Vortex
to pump.

PUMP SIZING MAXIMUM PARTICLE SIZE PHYSICAL ATTRIBUTES MINIMUM PIT DIMENSIONS UNILIFT AP35 & AP50
B
UNILIFT UNILIFT UNILIFT UNILIFT
UNILIFT AP UNILIFT AP UNILIFT AP UNILIFT AP CC / KP AP 12 AP 35 & AP 35B AP50 & AP50B
35 40.06 35 40.08 50 50.08 50 50.11

Min. 600
40 mm pipework 50 mm pipework 50 mm pipework 65 mm pipework
2.0 l/sec 2.5 l/sec 3.0 l/sec 4.0 l/sec
flow rate flow rate flow rate flow rate

Vertical
Maximum Horizontal Pipe Length 10 mm 12 mm 35 mm 50 mm
Height

7m 44 m 28 m A

6m 15 m 91 m 16 m 88 m
PROTECTION & CONTROL*
UNILIFT UNILIFT
5m 38 m 138 m 50 m 147 m
AP 35 AP 50 Min. ø550
4m 62 m 185 m 85 m 206 m
Auto Start/Stop by Float Switch  
3m 86 m 233 m 119 m 265 m Power (kW) Connection Dimensions (mm) Weight
Non-Return Valve   Model
P1 / P2 Outlet A (h) B (w) (kg)
2m 110 m 280 m 153 m 324 m Motor Cooling Jacket   UNILIFT AP 35.40.06 0.90 / 0.60 1 1/2” Female 376 216 11
UNILIFT AP 35.40.08 1.20 / 0.70 1 1/2” Female 410 216 13
1m 134 m 327 m 187 m 384 m Automatic Restart  
UNILIFT AP 50.50.08 1.30 / 0.80 2” Female 436 241 15
Flow based on at least 1 m/sec velocity UNILIFT AP 50.50.11 1.60 / 1.10 2” Female 436 241 15
*For full explanation of Protection and Controls see page 69-70
AP35B.50.08
80 8
CLICK TO GO BACK TO CONTENTS AP35B.50.06
40 4
GRUNDFOS DRAINAGE & WASTEWATER
0 0
0 4 8 12 16 20 24 28 32 Q [m3/h]

UNILIFT AP 35B & 50B 2


YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
0

0 100
2

200
4

300
6

400
8

500
Q [l/s]

Q [l/min]

HEAVY DUTY, SUBMERSIBLE STAINLESS STEEL GREY WATER PUMP PERFORMANCE CURVE
p H p H
[kPa] [m] [kPa] [m]

160 16 160 16
WATER SOURCE APPLICATION
120 120 AP50B.50.15
12 12
AP50B.50.11
AP35B.50.08
80 8 80 8
AP50B.50.08
47
AP35B.50.06
Storm/ Storm/Grey UNILIFT AP 35B UNILIFT AP 50B 40 4 40 4
Grey Water Water Handling SCAN THE QR CODE SCAN THE QR CODE
TO LINK TO GRUNDFOS TO LINK TO GRUNDFOS
PRODUCT CENTER PRODUCT CENTER 0 0 0 0
0 4 8 12 16 20 24 28 32 Q [m3/h] 0 4 8 12 16 20 24 28 32 Q [m3/h]

0 2 4 6 8 Q [l/s] 0 2 4 6 8 Q [l/s]
The Grundfos UNILIFT AP 35B and AP 50B are heavy duty, submersible
pumps of stainless steel and composite construction, which are ideal for
0 100 200 300 400 500 Q [l/min] 0 100 200 300 400 500 Q [l/min]
handling dirty stormwater runoff, domestic wastewater from bathroom
basins or showers and fibrous laundry wastewater.

• Highly corrosion resistant - Constructed of high quality industrial p H


[m]
[kPa]
grade components. All internal parts are manufactured from 304
stainless steel OPERATING
160 16
CONDITIONS TECHNICAL DATA

• Handle very dirty water with ease - Can both easily pump large 120 AP50B.50.15
12 Single Phase: 220-240 Volt, 50 Hz
particles in stormwater run off or material fibres in laundry grey Liquid TemperatureAP50B.50.11 0°C to +40°C Power Supply Voltage
Three Phase: 380-400 Volt, 50 Hz
water 80 8
AP50B.50.08
AP 35B (35 mm) Single Phase: 10 m with plug
• Easy installation – plug & pump - Connect the pump outlet to the 40Max. Particle
4 Size
AP 50B (50 mm) Power Supply Cable
Three Phase: 10 m hard wired
pipework, plug into a power outlet and you’re ready to pump 0
0 Suitable for submerged installation
Max. Installation
0 4 Depth
8 12 7 m 20
16 24 28 32 Q [m3/h] Enclosure Class
• Simple cleaning and maintenance - (IP68)
Features quick release clips allowing 0 2 4 6 8 Q [l/s]
easy dismantling of the pump body for Minimum Pumping Level Down to 270 mm Approvals and Markings C-Tick Compliance.
cleaning or unblocking. AP35B & 50B 0 100 200 300 400 500 Q [l/min]
can be permanently installed on an pH value of pumped liquid 4 to 10 Impeller Type Vortex
UNILIFT AP 50B
auto-coupling device for trouble free
maintenance. UNILIFT AP 35B
PHYSICAL ATTRIBUTES MINIMUM PIT DIMENSIONS UNILIFT AP35B & AP50B
PUMP SIZING MAXIMUM PARTICLE SIZE

UNILIFT UNILIFT UNILIFT UNILIFT UNILIFT UNILIFT UNILIFT UNILIFT UNILIFT


AP 35B AP 35B AP 50B AP 50B AP 50B CC / KP AP 12 AP 35 & AP 35B AP50 & AP50B
50.06 50.08 50.08 50.11 50.15
50 mm 50 mm 50 mm 50 mm 50 mm
pipework pipework pipework pipework pipework
2.5 l/sec 3.0 l/sec 3.0 l/sec 4.0 l/sec 4.5 l/sec

Min. 600
flow rate flow rate flow rate flow rate flow rate
A
Vertical
Maximum Horizontal Pipe Length
Height
10 mm 12 mm 35 mm 50 mm
10 m 30 m

9m 11 m 44 m
C
8m 29 m 59 m PROTECTION & CONTROL*
UNILIFT UNILIFT Min. ø550
7m 30 m 47 m 73 m B
AP 35B AP 50B
6m 19 m 60 m 14 m 64 m 88 m
Power (kW) Connection Dimensions (mm) Weight
5m 61 m 89 m 44 m 82 m 102 m Auto Start/Stop by Float Switch   Model
P1 / P2 Outlet A (h) B (w) C (Outlet) (kg)
4m 102 m 119 m 74 m 101 m 116 m Non-Return Valve   UNILIFT AP 35B.50.06.A1 V 1.00 / 0.66 2” Female 443 234 116 10
UNILIFT AP 35B.50.08.A1 V 1.47 / 1.02 2” Female 468 234 116 12
3m 143 m 149 m 103 m 118 m 131 m
Overheating Protection UNILIFT AP 50B.50.08.A1 V 1.20 / 0.74 2” Female 468 234 116 10
 
2m 185 m 179 m 133 m 136 m 145 m with Automatic Restart
UNILIFT AP 50B.50.11.A1 V 1.80 / 1.20 2” Female 468 234 116 10
1m 226 m 209 m 163 m 154 m 160 m Auto Coupling Option   UNILIFT AP 50B.50.11.3 V 1.75 / 1.31 2” Female 468 234 116 12
UNILIFT AP 50B.50.15.3 V 2.15 / 1.50 2” Female 468 234 116 12
Flow based on at least 1 m/sec velocity *For full explanation of Protection and Controls see page 69-70
CLICK TO GO BACK TO CONTENTS
GRUNDFOS DRAINAGE & WASTEWATER

UNILIFT APG 2
YEAR
TECHNICAL DATA Company name:
Created by:
Grundfos Pumps Australia

DOMESTIC WASTEWATER GRINDER PUMP WARRANTY Phone:

PERFORMANCE CURVE Date: 06/05/2022

92616914 UNILIFT APG.40.10.A1 50 Hz


H UNILIFT APG.40.10.A1, 50Hz
[m]
Pumped liquid = Water
30

WATER SOURCE APPLICATION


Liquid temperature during operation = 20 °C
Density = 998.2 kg/m³
29

28

27

26

25

24

23

Blackwater
Storm/
Grey Water
Blackwater
Handling
Storm/Grey
Water Handling
SCAN THE QR CODE
TO LINK TO GRUNDFOS
22

21
49
PRODUCT CENTER 20

19

18

Designed to grind and move domestic wastewater or 17

stormwater over long distances, the new UNILIFT APG


16

15

is a versatile and reliable pumping solution. 14

13

12

• Industrial Grinder - based on Grundfos’ industrial 11

10

SEG wastewater pump range, the UNILIFT APG is capable 9

of grinding the most challenging wastewater debris 7

into small pieces 5

• Flexible Installation Options - APG comes with a 2

combi-flange making it easy to install into in existing pits 1

0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 Q [l/s]

or match with existing pipework. Use the DN32/40 flange Printed from Grundfos Product Centre [2022.19.006] 1/1

or the 48 mm internal threaded connection


UNILIFT APG
with float switch OPERATING CONDITIONS TECHNICAL DATA
• Suits a variety of applications - from single family homes to
low-rise residential buildings, the UNILIFT APG can be used
Power Supply Voltage Single Phase: 220-240V, 50 Hz
inside a building in a lifting station, or outside in a pumping UNILIFT APG Liquid Temperature 0°C to +40°C (70°C for 3 minues)
no float switch
station or pit Power Supply Cable 10 m with plug
Max. Particle Size 40 mm
• Team up with LC231 or LC241 controller -
Enclosure Class Submerged installation (IP68)
Flexible control and monitoring options for
one or two pumps systems Max. Installation Depth 7m
Approvals and Markings C-Tick Compliance

PHYSICAL ATTRIBUTES

PUMPING DISTANCE

DN32/40 DN32/40 209 mm


Head\Distance Outlet Pipe Length Outlet Pipe Length
22 m Max. 25/35 m

498 mm

254 mm
20 m Max. 90/120 m

18 m Max. 160/215 m Max. 19/25 m

16 m Max. 225/305 m Max. 40/55 m

14 m Max. 295/395 m Max. 65/90 m

12 m Max. 360/485 m Max. 90/120 m

87 mm
10 m Max. 430/575 m Max. 115/150 m

8m Max. 495/665 m Max. 135/185 m

6m Max. 565/755 m Max. 160/215 m Power (kW)


Model Outlet Weight (kg)
P1 / P2
4m Max. 630/850 m Max. 185/250 m
UNILIFT APG.40.10.A1 (with Float) 1.3 / 1.0 25
2m Max 700/940 m Max. 210/280 m Flange: DN32 / DN40 Thread: 1 1/2” Female
Q=35/53 l/min Q= 60/90 l/min UNILIFT APG.40.10.1 (no Float) 1.3 / 1.0 25
Flow
(v=0.7 m/s) (v=1.2 m/s)
CLICK TO GO BACK TO CONTENTS
GRUNDFOS DRAINAGE & WASTEWATER

SOLOLIFT2 WC-1, 2
YEAR TECHNICAL DATA SOLOLIFT2 WC-3

WC-3 & CWC-3


Ø22/25/28/32/36/40
WARRANTY

INSTALLATION SCHEMATIC*

SOLOLIFT2 WC-1

Max. 6 m
COMPACT GREY WATER AND BLACKWATER HANDLING STATION Hand
Basin
Ø22/25/28/32/36/40 Ø36/40

WATER SOURCE APPLICATION


Min.
Ø36/40/50 Ø36/40/50 51
80 mm
Hand

Max. 6 m
Shower Floor mounted Bidet
SCAN THE QR CODE Basin toilet
Blackwater Grey Water TO LINK TO GRUNDFOS
Blackwater Grey Water Ø36/40
Handling Handling PRODUCT CENTER
SOLOLIFT2 CWC-3
The Grundfos SOLOLIFT2 WC-1, WC-3 and CWC-3 lifting stations are
all-in-one grinding and pumping units designed for the effective
handling of a combination of bathroom grey water and toilet
Floor mounted Ø22/25/28/32/36/40
wastewater. Designed to be installed below street level or away toilet
Hand
Basin

Max. 6 m
from existing sewerage pipework.
Ø36/40

• Very low maintenance - Thanks to the powerful built-in *Illustrative purposes only
grinder, blockages are greatly minimised Ø36/40/50 Ø36/40/50
Min.
80 mm
• Space saving design fits small spaces - Compact units making
Shower Wall mounted Bidet
them suitable for installation in to small bathrooms toilet

• Low installation costs - Plumbing connections are adjustable SOLOLIFT2 WC-1


up to 10 mm, making installation to existing or new pipework OPERATING CONDITIONS TECHNICAL DATA
simple and inexpensive
Liquid Temperature 0°C to +50°C Power Supply Voltage 220-240 Volt, 50 Hz
SOLOLIFT2 WC-1 - Suitable for connection to one floor mounted
SOLOLIFT2 WC-3
toilet and one additional appliance, such as a handbasin.
pH value of pumped liquid 4-10 Power Supply Cable 1.2 m with plug
SOLOLIFT2 WC-3 - Suitable for connection to one floor mounted
toilet and a maximum of three additional appliances, such as hand Tank Volume 9.0 litres Enclosure Class Requires indoor installation (IP44)
basins or a shower.
WaterMark Approved
SOLOLIFT2 CWC-3 - Compact unit suitable for connection to one Sound Pressure Max. 70 dB Approvals and Markings
C-Tick Compliance
wall mounted toilet and a maximum of three additional appliances,
such as hand basins or shower.
PHYSICAL ATTRIBUTES
SOLOLIFT2 CWC-3
SOLOLIFT2 WC-1 & WC-3 SOLOLIFT2 CWC-3
PUMP SIZING
170 mm
170 mm 82.1 mm 82.1 mm
Max. 6 m 121.4 mm
121.4 mm 93 mm93 mm
Ø36.2 mm 48.4 mm48.4 mm 37 mm 37 mm
Ø28.4 mm
5m
Ø36.2 mm
Ø28.4 mm

368.1 mm

368.1 mm
346.5 mm
346.5 mm
mm
322.2 mm
Ø26 mm

337 mm

337 mm
273 mm
mm
4m

322.2

38 mm

38 mm
Ø36.2 mm

273

182 mm

182 mm
178.5 mm
178.5 mm
182 mm
182 mm

Ø28.4 mm
Ø26 mm
Ø23 mm
3m
Ø36.2 mm 517.7 mm 517.7 mm
4-9 l Ø28.4 mm 297.4 mm
297.4 mm
Ø26 mm 175.5 mm
175.5 mm 441.8 mm
441.8 mm 164.2 mm 164.2 mm 538.4 mm 538.4 mm
Ø23 mm
2m
Ø36.2 mm
Ø28.4 mm
Ø26 mm Power (kW) Connections Weight
Ø23 mm Model
1m P1 / P2 Inlet (Toilet) Inlet (Top) Inlet (Right) Inlet (Left) Outlet (Top) Outlet (Side) (kg)
Ø36.2 mm
Ø28.4 mm SOLOLIFT2 WC-1 0.62 / 0.42 100 mm 32/36/40 mm - - 22-40 mm 22-40 mm 7
Ø26 mm
Ø23 mm SOLOLIFT2 WC-3 0.62 / 0.42 100 mm 32/36/40 mm 36/40/50 mm 36/40/50 mm 22-40 mm 22-40 mm 7
SOLOLIFT2 CWC-3 0.62 / 0.42 100 mm 36/40 mm 36/40/50 mm - 22-40 mm - 7
10 m 20 m 30 m 40 m 50 m 60 m 70 m 90 m
CLICK TO GO BACK TO CONTENTS
GRUNDFOS DRAINAGE & WASTEWATER

SOLOLIFT2 C-3 & D-2 2


YEAR
WARRANTY
TECHNICAL DATA
INSTALLATION SCHEMATIC*
COMPACT GREY WATER HANDLING STATION
SOLOLIFT2 C-3 SOLOLIFT2 D-2

WATER SOURCE APPLICATION


Ø22/25/28/32/36/40

Hand 170 mm
Basin
53
SCAN THE QR CODE
Grey Water

300 mm
Grey Water TO LINK TO GRUNDFOS
Handling PRODUCT CENTER

Max. 6 m
450 mm
Ø36/40/50
Ø36/40/50 Shower
The Grundfos SOLOLIFT2 C-3 & D-2 lifting stations are compact,
all-in-one pumping units designed for the effective handling of grey Hand Basin Dishwasher
water from bathrooms, kitchens or laundries. Designed to be installed with cabinet
below street level or away from existing sewerage pipework. Wall Cavity 170 mm

• Space saving design fits small spaces - Compact units making


*Illustrative purposes only
them suitable for installation in to small areas

300 mm
• Low installation costs - Plumbing connections are adjustable Hand
up to 10 mm, making installation to existing or new pipework Shower Basin
simple and inexpensive OPERATING CONDITIONS TECHNICAL DATA
450 mm

• Very low maintenance - Thanks to separated motor, pump and


SOLOLIFT2 C-3: 0°C to +75°C
tank the D-2 and C-3 are very easy to maintain. Most blockages SOLOLIFT2 C-3 Power Supply Voltage 220-240 Volt, 50 Hz
Liquid Temperature (90°C 30 mins)
can be cleared without the need to open the units.
SOLOLIFT2 D-2: 0°C to +50°C
SOLOLIFT2 C-3 - Suitable for connection to a maximum of three Power Supply Cable 1.2 m with plug
appliances, including hand basins, showers, bathtubs or kitchen pH value of pumped liquid 4-10
sinks, as well as to washing machines and dishwashers, where high
temperature water may enter the system SOLOLIFT2 C-3: 5.7 litres Enclosure Class Requires indoor installation (IP44)
Tank Volume
SOLOLIFT2 D-2: 2.0 litres
SOLOLIFT2 D-2 - Suitable for connection to a maximum of two
WaterMark Approved
appliances such as hand basins and showers Sound Pressure Max. 70 dB Approvals and Markings
SOLOLIFT2 D-2 C-Tick Compliance
5
PHYSICAL ATTRIBUTES
3
SOLOLIFT2 C-3 SOLOLIFT2 D-2

PUMP SIZING - SOLOLIFT2 C-3 PUMP SIZING - SOLOLIFT2 D-2 127.3127.3


mmmm

216.5 mm
40.640.6
mmmm

147.3 mm
Max. 6 m

75.8 mm
Ø36.2 mm 4.5 m
Ø28.4 mm
Ø26 mm

32 mm
Ø23 mm 4m Ø20 mm
5m Ø20 mm 376 mm

324.5 mm
324.5 mm

201 mm341.1 mm

341.1 mm
Ø36.2 mm Ø28.4 mm
Ø28.4 mm

255.3 mm
255.3 mm
3.5 m Ø20 mm
Ø26 mm

201 mm
Ø23 mm
4m
Ø20 mm Ø28.4 mm
Ø36.2 mm 3m Ø20 mm

164.8 mm
Ø28.4 mm

128.9 mm
Ø26 mm Ø28.4 mm

82.4 mm

82.4 mm
Ø23 mm Ø20 mm
Ø20 mm 2m
3m
Ø36.2 mm
Ø28.4 mm Ø28.4 mm 443.8
443.8
mmmm
Ø26 mm Ø20 mm
1m 158.3158.3
mmmm 493 493
mmmm 56.8 mm 298.8 mm 54.4 mm
Ø23 mm
Ø20 mm
2m Ø28.4 mm
Ø36.2 mm Ø20 mm
Ø28.4 mm
Ø26 mm Power (kW) Connections Weight
Ø23 mm 10 m 20 m 30 m 40 m 50 m 60 m 70 m 90 m Model
Ø20 mm P1 / P2 Inlet (Toilet) Inlet (Top) Inlet (Right) Inlet (Left) Outlet (Top) Outlet (Side) (kg)
1m
Ø36.2 mm
Ø28.4 mm 22/25/28/ 22/25/28/
SOLOLIFT2 C-3 0.64 / 0.42 100 mm 32/36/40 mm 36/40/50 mm 36/40/50 mm 7
Ø26 mm 32/36/40 mm 32/36/40 mm
Ø23 mm
Ø20 mm
SOLOLIFT2 D-2 0.28 / 0.16 100 mm - 36/40 mm 36/40 mm - 22/32 mm 5
10 m 20 m 30 m 40 m 50 m 60 m 70 m 90 m
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOME & GARDEN RANGE

LC231 2
YEAR

HOT WATER & HEATING


WARRANTY

LEVEL CONTROL UNIT WITH BLUETOOTH® CONNECTIVITY

The LC231 automatically turns your pump/s


on and off according to the liquid level measured

2
by float switches or a level transmitter.
The Grundfos Circulator range provides solutions for
hot water pressure boosting, hot water circulation to
• Flexible control - Control one or two pumps
provide instant hot water and for heating applications. YEAR
for pit emptying or tank filling purposes. WARRANTY
Suits single or three phase power.

• Added Protection - Built-in certified motor


protection warns in the event of current
overload, overheating, too many restarts, RANGE AT A GLANCE
missing phase, sensor failure and more.

• Bluetooth® connectivity - For easy


commissioning and monitoring use
the Grundfos GO App on your mobile
device or tablet to connect via Bluetooth®
to the control unit.
Use the Go App to:

• monitor fluid level; UPA N UP N UPS N COMFORT PM ALPHA2 N UPS ALPHA2


• monitor and reset alarms;
• add and select floats/transmitter; Page 56 Page 58 Page 62 Page 64 Page 68 Page 60 Page 66
• set stop/start levels;
• other advanced settings
Water Source
• Configurable inputs/outputs - A number
Hot Water Hot Water Hot Water
of available inputs and outputs allow for extra
sensors and alarms to be added

• Easy to read control panel - Use the control unit


front panel to visually monitor general operation, Application
set fluid levels and re-set alarms Mains Hot Water Heating
Boosting Circulation

• Remote management connectivity - Add BMS


CIM Card for intergration with SCADA and other
cloud services. ● ● ● ● ●

APPLICATIONS
EMPTYING (FLOAT SWITCHES) EMPTYING (TRANSMITTER) FILLING (FLOAT SWITCHES) Stainless Stainless Stainless Stainless
Pump Material Brass Cast Iron Cast Iron
Steel Steel Steel Steel

Max. Head 9m 4m 7.5 m 1.2 m 6m 6m 9m

Max. Flow 26 l/min 48 l/min 68 l/min 8 l/min 53 l/min 53 l/min 180 l/min

Max. Liquid Temp 95°C 110°C 110°C 95°C 110°C 110°C 110°C

OPERATING CONDITIONS TECHNICAL DATA


Operation Auto/ Fixed Speed AUTOADAPT Variable/ AUTOADAPT
Fixed Speed 3 Speed
Single Phase: 110-240 Volt, 50 Hz Modes Manual/Off AUTOADAPT 3 Speed 3 Speed 3 Speed
Power Supply Voltage
Three Phase: 200-415 Volt, 50 Hz
Ambient Temperature -25°C to +45°C
Undercover installation
Enclosure Class
recommended (IP54)
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOT WATER & HEATING

UPA N 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
HOT WATER PRESSURE BOOSTER PERFORMANCE CURVE INSTALLATION NOTES

WATER SOURCE APPLICATION

SCAN THE QR CODE


Hot Water Hot Water
Boosting
TO LINK TO GRUNDFOS
PRODUCT CENTER
57

The Grundfos UPA N is an ultra quiet, compact


domestic pressure booster pump designed to
increase existing pressure to a single hot water
outlet in the home.

• Increase hot water pressure for a single tap -


Ultra quiet, compact domestic pressure
booster pump designed to increase existing
pressure to a single hot water outlet

• Hygienic, stainless steel construction OPERATING CONDITIONS TECHNICAL DATA


throughout

• Built-in controller, so no extra wiring required Ambient Temperature 0°C to +40°C Power Supply Voltage 230 Volt, 50 Hz
• Ultra quiet operation - Very quiet operation
that won’t disturb your family Liquid Temperature +2°C to +95°C
Power Supply Cable 1.2 m with plug
• Simple to use - In AUTO mode the pump is System Pressure Max. 10 bar
operated via a built-in flow switch, which
Undercover installation recommended
starts and stops the pump only when the Enclosure Class
Sound Pressure Max. 43 dB (IPX2D)
tap is turned on or off. In MANUAL mode the
pump will operate continuously.

PHYSICAL ATTRIBUTES

UPA 15-90 N
B A
Adds 50 kPa pressure for one tap

C D F E

Dimensions (mm)
Power Input Pipe Weight
Model A
P1 (kW) Connections B (h) C (w1) D (w2) E (d1) F (d2) (kg)
(Port to Port)
UPA N 15-90 0.12 3/4” 214 160 50 54 103 23 3
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOT WATER & HEATING

UP N 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
STAINLESS STEEL HOT WATER CIRCULATOR PERFORMANCE CURVE INSTALLATION NOTES

UP N 20-30
UP N 20-45

WATER SOURCE APPLICATION


P H–
kPa [m]

60 6–

50 5–


SCAN THE QR CODE
Hot Water Hot Water
Circulation
TO LINK TO GRUNDFOS
PRODUCT CENTER
40 4– 59

30 3–

The Grundfos UP N is an ultra quiet, compact 20 2–

domestic hot water circulation pump designed –

to pump hot water around the home, making it 10 1–

instantly available for taps in the bathroom, kitchen –

or anywhere hot water is required. 0 0–


0 0.5 1 1.5 2 2.5 3 Q m3/h

• Instant hot water at the tap - As circulators 0.0 0.2 0.4 0.6 0.8 Q l/s

provide instant hot water at the tap (with


return line), they can save hundreds of litres
per year from going down the drain while
you wait for hot water to arrive from your hot OPERATING CONDITIONS TECHNICAL DATA
water system
Ambient Temperature 0°C to +40°C Power Supply Voltage 240 Volt, 50 Hz
• Hygienic, stainless steel construction
throughout Liquid Temperature +2°C to +110°C
Power Connection Installation by qualified electrician
• Ultra quiet operation - Very quiet operation
System Pressure Max. 10 bar
that won’t disturb your family
Undercover installation recommended
Enclosure Class
Sound Pressure Max. 43 dB (IP44)

UP N 20 mm Union Set
available separately
PHYSICAL ATTRIBUTES

A
PUMP SIZING
UP N UP N
20-30 150 20-45 150
20 mm Pipework
Sizing assumptions:
• Uninsulated pipework Maximum System Pipework Length B C D E
• Tempering valve installed
• 20 elbows and 10 tees
• 5oC temperature drop 25 m 75 m
• Electric storage hot water system Dimensions (mm)
Power Input Pipe Weight
Model A
P1 (kW) Connections B (w1) C (w2) D (d1) E (d2) (kg)
(Port to Port)
UP N 20-30 150 0.09 1 1/4” 150 75 43 28 100 2
UP N 20-45 150 0.12 1 1/4” 150 85 54 25 126 4
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOT WATER & HEATING

UPS 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
PERFORMANCE CURVE
THREE SPEED, CAST IRON HOT WATER CIRCULATOR
UPS 25-60 SPEED 1,2,3 UPS 25-100, UPS 32-100
UPS 25-80 SPEED 1,2,3 UPS 32-80
P H–

WATER SOURCE APPLICATION kPa [m]



P
kPa
H
[m]

70 7–
100 10 –

60 6– 90 9–


80 8–
SCAN THE QR CODE
Hot Water Heating
TO LINK TO GRUNDFOS
PRODUCT CENTER
50 5–
70 7–
61

40
60 6–
4–

– 50 5–

30 3– 40
The Grundfos UPS is an ultra quiet, compact hot water 4–
– 3
circulation pump designed for operation in a closed 20 2–
30 3–
2
loop heating system. 3 20 2–

1
10 10 1–
• Ideal for heating systems - Perfect for large home, 1–
3 2
3
2 1 2
hot water radiator heating systems –
1 1
0 0–
0 0– 0 1 2 3 4 5 6 7 8 9 10 11 12 Q m3/h
0 1 2 3 4 5 6 7 Q m3/h
• Ultimate heating system control - Comes with 0 0.5 1.0 1.5 2.0 2.5 3.0 Q l/S
0.0 0.4 0.8 1.2 1.6 2.0 Q l/s
a built-in 3 speed controller which provides the
ultimate in heating system flexibility and control

• Ultra quiet operation – Very quiet operation that OPERATING CONDITIONS TECHNICAL DATA
won’t disturb your family

Ambient Temperature +0°C to +40°C Power Supply Voltage 230 Volt, 50 Hz

Liquid Temperature -10°C to +110°C


Power Connection Installation by qualified electrician
System Pressure Max. 10 bar
Undercover installation recommended
Enclosure Class
Sound Pressure Max. 43 dB (IP44)
UPS 25 mm & 32 mm Union Sets
available separately

PHYSICAL ATTRIBUTES INSTALLATION NOTES

TYPICAL HEATING SYSTEM INSTALLATION

B C E D

Dimensions (mm)
Power Input Pipe Weight
Model A
P1 (kW) Connections B (w1) C (w2) D (d1) E (d2) (kg)
(Port to Port)
UPS 25-60 130 0.07 1 1/2” 130 75 51 32 102 2
UPS 25-60 180 0.06 1 1/2” 180 75 51 32 102 3
UPS 25-80 180 0.17 1 1/2” 180 85 62 46 125 4
UPS 32-80 180 0.22 2” 180 85 62 48 125 5
UPS 25-100 180 0.35 1 1/2” 180 90 68 47 150 6
UPS 32-100 180 0.35 2” 180 90 68 47 150 6
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOT WATER & HEATING

UPS N 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
PERFORMANCE CURVE
THREE SPEED, STAINLESS STEEL
HOT WATER CIRCULATOR UPS 20-60 N SPEED 1,2,3
UPS 25-60 N SPEED 1,2,3
UPS 25-80 N SPEED 1,2,3
UPS 32-100 N
P H–
UPS 32-80 N
kPa [m] P H–

WATER SOURCE APPLICATION


kPa [m]
– – P H
kPa [m]
60 70 7– –
6–

– 100
– 10 –
60 6–
50 5– 90 9–

– 80 8–
50 5–
40 4–
– 70 7–
SCAN THE QR CODE
Hot Water Hot Water
Circulation
TO LINK TO GRUNDFOS
PRODUCT CENTER 30

3–
40 4–


60 6–
63
50 5–
– 3 30 3–
2 40 4–
20 1 –
2–
3
20 2– 30 3–

The Grundfos UPS N is an ultra quiet, compact domestic 10 1–



3
20 2–
2

1
circulation pump, designed to pump hot water around the
10 1–
3 2 10 1–
– 2
– 3
1
home, making it instantly available for taps in the bathroom, 0 0– 0 0–
1
1 0 0–
0 1 2 3 4 5 6 7
2
8 9 10 11 12
0 0.5 1 1.5 2 2.5 3 Q m3/h Q m3/h
kitchen or anywhere hot water is required. 0.0 0.2 0.4 0.6 0.8 Q l/s
0

0.0
1

0.4
2 3

0.8
4

1.2
5

1.6
6 7

2.0
Q m3/h

Q l/m 0 0.5 1.0 1.5 2.0 2.5 3.0 Q l/S

• Instant hot water at the tap - As circulators provide


instant hot water at the tap (with return line), they can
save hundreds of litres per year from going down the
drain while you wait for hot water to arrive from your hot OPERATING CONDITIONS TECHNICAL DATA
water system
Liquid Temperature +2°C to +110°C Power Supply Voltage 240 Volt, 50 Hz
• Adjustable pressure modes - Comes with a built-in 3
speed controller which allows you adjust the pressure to
showers or tap as required Ambient Temperature 0°C to +40°C
Power Connection Installation by qualified electrician
• Hygienic, stainless steel construction throughout System Pressure Max. 10 bar

• Quiet operation – Very quiet operation that won’t disturb Undercover installation
Enclosure Class
Sound Pressure Max. 43 dB recommended (IP44)
your family

PHYSICAL ATTRIBUTES INSTALLATION NOTES


UPS N 20 mm, 25 mm & 32 mm
Union Sets available separately

PUMP SIZING UPS 20-60 UPS 25-60 UPS 25-80 UPS 32-80 UPS 32-100
N 150 N 180 N 180 N 180 N 180
B C E D
20 mm Pipework 25 mm Pipework 32 mm Pipework
Maximum System Pipework Length

Sizing assumptions: Speed 1 70 m 80 m 75 m 175 m


• Uninsulated pipework Dimensions (mm)
Power Input Pipe Weight
• Tempering valve installed Model A
P1 (kW) Connections B (w1) C (w2) D (d1) E (d2) (kg)
• 20 elbows and 10 tees Speed 2 55 m 95 m 120 m 150 m 190 m (Port to Port)
• 5oC temperature drop UPS 20-60 N 150 0.09 1 ½” 150 75 51 28 102 3
• Electric storage
Speed 3 75 m 95 m 130 m 170 m 200 m UPS 25-60 N 180 0.06 1 ½” 180 75 51 32 102 3
hot water system
UPS 25-80 N 180 0.17 1 ½” 180 85 62 46 125 4
UPS 32-80 N 180 0.22 2” 180 85 62 48 125 5
UPS 32-100 N 180 0.35 2” 180 90 68 47 150 6
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOT WATER & HEATING

COMFORT PM 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
PERFORMANCE CURVE INSTALLATION NOTES
HIGH EFFICIENCY, DOMESTIC HOT WATER CIRCULATOR

WATER SOURCE APPLICATION

SCAN THE QR CODE


Hot Water Hot Water
Circulation
TO LINK TO GRUNDFOS
PRODUCT CENTER
65

The Grundfos COMFORT PM is an ultra quiet, ultra energy


efficient, domestic hot water circulation pump designed
to circulate hot water around the home, making it
instantly available for taps in the bathroom, kitchen and
anywhere hot water is required.

• Instant hot water at the tap - As circulators provide


instant hot water at the tap (with return line), they
can save hundreds of litres per year from going
down the drain while you wait for hot water to OPERATING CONDITIONS TECHNICAL DATA
arrive from your hot water system

• Energy efficient - The AUTOADAPT feature “learns” COMFORT PM Ambient Temperature 0°C to +40°C Power Supply Voltage 230 Volt, 50 Hz
the hot water consumption pattern of the home
and then varies pump use accordingly in the future, Liquid Temperature +2°C to +95°C
providing high levels of energy efficiency compared Comes with Alpha plug
Power Connection
to other circulators that run continuously Initial installation by qualified electrician
System Pressure Max. 10 bar
• Low running costs - Comes with a highly efficient Undercover installation
Enclosure Class
permanent magnet motor that helps to save power Sound Pressure Max. 43 dB recommended (IP44)
and lower running costs

• Ultra quiet operation - Very quiet operation that


won’t disturb your family
COMFORT PM WITH AUTOADAPT

PHYSICAL ATTRIBUTES

COMFORT PM B COMFORT PM BA (AUTOADAPT)

PUMP SIZING
COMFORT PM 15-14

Sizing assumptions: 15 mm Pipework


A
• Uninsulated pipework A
• 20 elbows and 10 tees Maximum System Pipework Length
• 5oC temperature drop
• Electric storage hot 30 m
water system E E
Comfort PM is not suitable for installation with tempering valve B B
C F D C F D

Dimensions (mm)
Power
Pipe A Weight
Model Input P1
Connections (Port B (w1) C (w2) D (d1) E (d2) F (d3) (kg)
(kW)
to Port)
COMFORT 15-14 B PM GB 0.07 ½” 80 79.5 84 119 13.5 25 1
COMFORT 15-14 BA PM GB 0.07 ½” 80 79.5 84 129 13.5 25 1
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOT WATER & HEATING

ALPHA2 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
MULTI-SPEED, CAST IRON HOT WATER CIRCULATOR PERFORMANCE CURVE

ALPHA2 SPEED 1,2,3

WATER SOURCE APPLICATION

SCAN THE QR CODE


Hot Water Heating
TO LINK TO GRUNDFOS
PRODUCT CENTER
67

The Grundfos ALPHA2 is an ultra quiet, compact hot


water circulation pump designed for operation in a
closed loop heating system.

• Ideal for heating systems - Perfect for large home,


hot water radiator heating systems

• Energy efficient - The AUTOADAPT feature


“learns” the hot water circulation patterns of the
home heating system and then varies pump use
accordingly in the future

• Ultra quiet operation - Very quiet operation that OPERATING CONDITIONS TECHNICAL DATA
won’t disturb your family
Ambient Temperature 0°C to +40°C Power Supply Voltage 230 Volt, 50/60 Hz

Liquid Temperature +2°C to +110°C


Comes with Alpha plug
Power Connection
Initial installation by qualified electrician
System Pressure Max. 10 bar
ALPHA2 25 mm Union Set
Undercover installation
available separately Sound Pressure Max. 43 dB
Enclosure Class
recommended (IPX4D)

PHYSICAL ATTRIBUTES INSTALLATION NOTES


TYPICAL HEATING SYSTEM INSTALLATION
B C

D E

Dimensions (mm)
Power Input Pipe Weight
Model A
P1 (kW) Connections B (w1) C (w2) D (d1) E (d2) (kg)
(Port to Port)

ALPHA2 25-60 130 0.03 1 ½” 130 54 54 37 104 2


ALPHA2 25-60 180 0.03 1 ½” 180 54 54 37 104 2
CLICK TO GO BACK TO CONTENTS
GRUNDFOS HOT WATER & HEATING

ALPHA2 N 2
YEAR
WARRANTY
TECHNICAL & PERFORMANCE DATA
PERFORMANCE CURVE
MULTI-SPEED, STAINLESS STEEL
HOT WATER CIRCULATOR ALPHA2 N SPEED 1,2,3

WATER SOURCE APPLICATION

SCAN THE QR CODE


Hot Water Hot Water
Circulation
TO LINK TO GRUNDFOS
PRODUCT CENTER
69

The Grundfos ALPHA2 N is an intelligently controlled,


ultra quiet, hot water circulation pump designed to circulate hot
water around the home, making it instantly available for taps in
the bathroom, kitchen or anywhere hot water is required.

• Instant hot water at the tap - As circulators provide


instant hot water at the tap (with return line), they can
save hundreds of litres per year from going down the drain
while you wait for hot water to arrive from your hot water
system

• Energy efficient - the AUTOADAPT feature “learns” the hot


OPERATING CONDITIONS TECHNICAL DATA
water consumption pattern of the home and then varies
pump use accordingly in the future, providing superior
levels of energy efficiency compared to other circulators Ambient Temperature 0°C to +40°C
Power Supply Voltage 230 Volt, 50/60 Hz
that run continuously
Liquid Temperature +2°C to +110°C
• Hygienic, stainless steel construction throughout Comes with Alpha plug
Power Connection
Initial installation by qualified electrician
System Pressure Max. 10 bar
• Ultra quiet operation – Very quiet operation that won’t
disturb your family Undercover installation
Sound Pressure Max. 43 dB Enclosure Class
recommended (IPX4D)

ALPHA2 N 25 mm Union Set


available separately PHYSICAL ATTRIBUTES INSTALLATION NOTES

B C

PUMP SIZING
ALPHA2 25-60 A
Sizing assumptions: 25 mm Pipework
• Uninsulated pipework
• Tempering valve installed Maximum System Pipework Length
• 20 elbows and 10 tees
• 5oC temperature drop
110 m D E
• Electric storage
hot water system
Dimensions (mm)
Motor
Pipe Weight
Model Power P1 A
Connections B (w1) C (w2) D (d1) E (d2) (kg)
(kW) (Port to Port)

ALPHA2 25-60 N 130 0.03 1 ½” 130 54 54 37 104 2


ALPHA2 25-60 N 180 0.03 1 ½” 180 54 54 37 104 2
GRUNDFOS PROTECTION & CONTROLS

PROTECTIONS CONTROLS
Grundfos pumps feature a range of protection functions which are defined below. Grundfos pumps feature a range of control functions which are defined below.
See individual product pages for a list of relevant pump protections. See individual product pages for a list of relevant pump controls

MAX CONTINUOUS RUN TIME ANTI-CYCLING PROTECTION DRY-RUN PROTECTION ADJUSTABLE START PRESSURE AUTOMATIC RESTART AUTO START/STOP
71
If the pump runs continuously The pump will be stopped and The pump will be stopped if The pump controller allows The pump will automatically The pump will automatically
for more than 30 minutes the alarm activated if it repeatedly no water is detected at the for the starting pressure to restart after a protection feature start and stop when outlets
motor will be stopped and turns on and off over a short inlet, preventing internal be adjusted up or down as has stopped the pump, such as (eg: taps) are turned on or off.
alarm activated. Could indicate period of time (called 'cycling'), damage and protecting your required. SCALA2 and CME anti-cycling or dry-run alarms.
a pipe fracture or outlet which could indicate a leaking motor from damage. Booster have a simple up/
left unattended. pipe or dripping tap. down press button control.

CURRENT OVERLOAD THERMAL OVERLOAD POWER FAILURE LED FLOAT SWITCH GRUNDFOS EYE LED STATUS INDICATORS
PROTECTION PROTECTION
Indicates the incoming External float that either turns Provides dynamic pump status Either shown via LED lights
The single phase motor will The single phase motor will stop voltage supply is outside the your pump on or off based on operator feedback such as: or 'Grundfos Eye' indicator
stop automatically if a current automatically if it overheats and acceptable range 150 V - 400 V the water level - this prevents power on, pump running and that shows whether the
overload event occurs and will will restart once it cools down - (SCALA2 only). either overflowing (UNILIFT) or any alarms or faults. pump has power to it, is
restart once normal current is protecting your motor dry-running (SB/SBA). currently running or whether
restored - protecting your motor from damage. a protection feature has been
from damage. activated (alarm)

PUMP BLOCKED LED TEMPERATURE LED MAX PRESSURE EXCEEDED LED

Indicates that there is debris or Indicates that the water Maximum pressure accepted by OUTLET NON-RETURN VALVE PRESSURE INDICATOR LED BLUETOOTH® CONNECTIVITY
impurities blocking the pump. temperature is over the the pump has been exceeded at
(SCALA2 only) acceptable range (45oC) and the the inlet (SCALA2 only). Prevents water from flowing Indicates the adjustable Using the Grundfos Go App,
pump has been stopped. back through the pump to the starting pressure currently set wirelessly connect to your
If the water temperature nears water source under gravity, for the pump in bar. Grundfos product via
freezing point the pump will retaining it in the pipework. Bluetooth® to simplify
cycle to prevent the water installation, customisation,
freezing inside the body control and troubleshooting.
(SCALA2 only).
CLICK TO GO BACK TO CONTENTS
GRUNDFOS CONVERSION TABLES

CONVERSION TABLES POLYETHYLENE PIPE FRICTION LOSS METRIC


(AS/NZS 4130)
POLYETHYLENE PIPE FRICTION LOSS RURAL CLASS B

Friction Loss (metres/100 metres of pipe)


Flow rate Flow rate Friction Loss (metres/100 metres of pipe)
UNITS OF PRESSURE NOZZLE FLOW RATES (litres/sec) OD 32MM
5/32”
OD 40mm
5/16”
OD 50mm
15/32
OD 63mm
25/32”

CONVERT l/s l/min PN6.3 PN12.5 PN6.3 PN12.5 PN6.3 PN12.5 PN6.3 PN12.5 l/s l/min ¾” 1” 1 ¼” 1 ½” 2”
Diameter of Nozzle (inches*) mm
TO bs per Feet of Pressure
Kilopascal Metrehead Bar Atmosphere 0.4 24 2.08 3.99 0.73 1.39 0.25 0.48 0.09 0.16 0.4 24 11.8 2.9 1.0 0.4 0.1
sq. inch Water 5/64” 5/32” 1/4” 5/16” 25/64” 15/32 5/8” 25/32” 1”
0.5 30 3.07 5.9 1.08 2.05 0.37 0.7 1.13 0.24 0.5 30 20.8 5.1 1.7 0.7 0.2
CONVERT kPa psi 2 4 6 8 10 12 16 20 25
FROM Multiply By 0.6 36 4.24 8.14 1.49 2.82 0.51 0.97 0.17 0.32 0.6 36 - 7.8 2.6 1.1 0.3
200 29 0.06 0.25 0.56 1.01 1.57 2.26 4.02 6.29 9.82
Kilopascal kPa 1 0.102 0.01 0.145 0.335 - 0.7 42 5.56 10.7 1.95 3.7 0.67 1.27 0.22 0.43 0.7 42 - 9.1 3.0 1.3 0.3
300 43 0.08 0.31 0.69 1.23 1.93 2.77 4.93 7.70 12.03
0.8 48 7.05 13.56 2.47 4.69 0.85 1.61 0.28 0.54 0.8 48 - 12.7 4.3 1.7 0.5
Metrehead m 9.804 1 0.098 1.42 3.28 0.098 400 58 0.09 0.36 0.80 1.42 2.22 3.20 5.69 8.89 13.89
0.9 54 8.68 16.72 3.04 5.78 1.04 1.98 0.35 0.66 0.9 54 - 14.3 4.9 1.9 0.5
500 73 0.10 0.40 0.89 1.59 2.48 3.58 6.36 9.94 15.53
Bar bar 100 10.20 1 14.5 33.15 1
1 60 10.47 20.17 3.66 6.96 1.26 2.38 0.42 0.8 1 60 - 18.5 6.2 2.6 0.6
600 87 0.11 0.43 0.98 1.74 2.72 3.92 6.97 10.89 17.02
lbs/sq inch psi 6.895 0.704 0.069 1 2.307 0.069
700 102 0.12 0.47 1.06 1.88 2.94 4.23 7.53 11.76 18.38
1.2 72 14.48 27.93 5.06 9.63 1.73 3.29 0.58 1.1 1.2 72 - 27.1 9.5 4.0 1.0
73
1.4 84 19.07 36.80 6.66 12.67 2.28 4.33 0.75 1.44 1.4 84 - 31.6 11.1 4.6 1.2
Feet of Water ft 2.98 0.3048 0.03 0.4335 1 0.03 800 116 0.12 0.50 1.13 2.01 3.14 4.53 8.05 12.58 19.65
1.6 96 24.21 46.76 8.45 16.09 2.89 5.49 0.96 1.83 1.6 96 - - 15.5 6.3 1.5
Atmosphere At 100 10.33 1.0 14.7 33.9 1 900 131 0.13 0.53 1.20 2.13 3.33 4.80 8.54 13.34 20.84
1.8 108 29.91 57.79 10.42 19.86 3.56 6.77 1.18 2.25 1.8 108 - - 17.4 7.1 1.7
1000 145 0.14 0.56 1.26 2.25 3.52 5.06 9.00 14.06 21.97
2 120 36.13 69.86 12.58 23.99 4.3 8.17 1.42 2.71 2 120 - - - 9.6 2.4

2.5 150 54.00 104.53 18.77 35.82 6.4 12.18 2.11 4.04 2.5 150 - - - 13.0 3.4
UNITS OF FLOW RATE UNITS OF LENGTH 3 180 75.05 - 26.05 49.75 8.87 16.89 2.92 5.6 3 180 - - - - 4.7

3.5 210 - - 34.39 65.74 11.69 22.29 3.85 7.38 3.5 210 - - - - 6.2
CONVERT Imperial Cubic
CONVERT
TO US Gallons Litres Litres per TO Millimetre Centimetre Metre Kilometre Inch Foot Mile 4 240 - - 43.77 83.73 14.86 28.35 4.89 9.37 4 240 - - - - 8.5
Gallons metres
per min per second minute
per min per hour 4.5 270 - - 54.17 - 18.38 35.07 6.04 11.59 4.5 270 - - - - 9.6
CONVERT
CONVERT FROM Multiply By 5 300 - - 65.57 - 22.22 42.44 7.3 14.01 5 300 - - - - -
FROM Multiply By
Millimetre mm 1 0.1 0.001 - 0.0394 0.0033 - 5.5 330 - - 77.69 - 26.40 50.44 8.66 16.63 5.5 330 - - - - -
Imperial Gallons per min 1 1.2 0.273 0.076 4.546
6 360 - - - - 30.90 59.07 10.13 19.46 6 360 - - - - -
Centimetre cm 10 1 0.01 - 0.394 0.0328 -
US Gallons per min 0.833 1 0.227 0.063 3.787 6.5 390 - - - - 35.72 68.31 11.70 22.49 6.5 390 - - - - -
Metre m 1000 100 1 0.001 39.37 3.281 0.000621 7 420 - - - - 40.86 - 13.38 25.72 7 420 - - - - -
Cubic Metres per hour 3.666 4.4 1 0.278 16.66
Kilometre km - - 1000 1 - 3281 0.621
Litres per second 13.19 15.85 3.6 1 60
Inch in 25.4 2.54 0.0254 - 1 0.083 -
Litres per minute 0.219 0.264 0.06 0.016 1
Feet ft 304.8 30.48 0.305 - 12 1 -
PVC PIPE FRICTION LOSS (AS/NZS 1477)
Mile mile - - 1610 1.61 - 5280 1
Friction Loss (metres/100 metres of pipe)
Flow rate
UNITS OF VOLUME Nom. 32mm
5/32”
Nom. 40mm
5/16”
Nom. 50mm
15/32
Nom. 80mm
25/32”
Nom. 100mm

l/s l/min PN9 PN12 PN9 PN12 PN9 PN12 PN9 PN12 PN9 PN12
CONVERT
Cubic Imperial 0.4 24 0.48 0.54 0.25 0.29 0.09 0.1 - - - -
TO Litre Kilolitre
metres Gallon
US Gallon

CONVERT 0.5 30 0.70 0.80 0.37 0.42 0.13 0.14 - - - -


FROM Multiply By 0.6 36 0.97 1.10 0.51 0.58 0.17 0.2 - - - -
0.7 42 1.27 1.44 0.66 0.77 0.23 0.26 - - - -
Litre l 1 0.001 0.001 0.220 0.264
0.8 48 1.61 1.82 0.84 0.97 0.29 0.33 - - - -
Kilolitre klt 1000 1 1 220 264
0.9 54 1.98 2.24 1.03 1.19 0.35 0.4 0.06 0.06 - -
Cubic metre m3 1000 1 1 220 264 1 60 2.38 2.70 1.24 1.43 0.42 0.48 0.07 0.08 - -

Imperial Gallon gal 4.546 0.00454 0.00454 1 1.201 1.2 72 3.29 3.74 1.72 1.98 0.59 0.67 0.09 0.11 - -
1.4 84 4.33 4.91 2.25 2.60 0.77 0.88 0.12 0.14 - -
US Gallon (US) gal 3.785 0.0038 0.0038 0.833 1
1.6 96 5.49 6.23 2.86 3.30 0.97 1.11 0.15 0.18 - 0.05
1.8 108 6.77 7.68 3.52 4.06 1.20 1.37 0.19 0.22 0.06 0.06
Note: The information provided on these pages is for guidance only.
Grundfos Pumps Aust Ltd accepts no responsibility for the 2 120 8.17 9.27 4.25 4.90 1.45 1.65 0.23 0.26 0.07 0.08

misuse or misapplication of this information. 2.5 150 12.18 13.83 6.33 7.30 2.15 2.45 0.34 0.39 0.1 0.12
3 180 16.89 19.18 8.77 10.12 2.97 3.4 0.46 0.53 0.14 0.16
3.5 210 22.29 - 11.56 13.35 3.92 4.47 0.61 0.70 0.18 0.21
4 240 - - 14.70 16.98 4.98 5.68 0.77 0.89 0.23 0.26
4.5 270 - - 18.18 20.99 6.15 7.02 0.95 1.1 0.29 0.33
5 300 - - - - 7.43 8.49 1.15 1.32 0.34 0.39
5.5 330 - - - - 8.82 10.07 1.37 1.57 0.41 0.47
6 360 - - - - 10.32 11.78 1.60 1.83 0.48 0.55
7 420 - - - - 13.62 15.59 2.11 2.42 0.63 0.72
8 480 - - - - - 19.82 2.68 3.07 0.8 0.91
9 540 - - - - - 24.54 3.31 3.8 0.98 1.13
10 600 - - - - - 29.71 4.0 4.59 1.19 1.36
11 660 - - - - - - 4.75 5.46 1.41 1.62
12 720 - - - - - 5.56 6.39 1.65 1.89
The Grundfos Ecademy is your “go to” site for knowledge that will help you
work better, faster and smarter. You can learn from Ecademy whenever and wherever you
want, thanks to mobile compatibility, a more flexible design, and short, to-the-point videos,
presentations, articles and interactive elements.

Ecademy is a free online tool, which can help you boost your knowledge about pumping
basics, pump applications, new technologies, pump types and more. With a wide range
of courses and learning tracks available, there’s something for everyone, including
homeowners expanding their knowledge, plumbers and installers looking for the latest
pump information and seasoned pump professionals updating their knowledge or training
their staff.

At home, in the office or on the road, Ecademy lets you boost your skills your way -
on your smartphone, tablet or PC.

Visit the Grundfos Ecademy


homepage and start learning
www.grundfos.com/au/learn/ecademy
ORDERING &
CONTACT DETAILS
Reach us by phone
1300 33 77 33
Pump Sales, Pump Selection Advice,
OPTION

1 Spare Parts and Orders


QUEENSLAND

After-Sales Service, Warranties and WESTERN


OPTION

GPM00690 - Australia 08/22


AUSTRALIA
After-Sales Technical Advice
SOUTH
AUSTRALIA
OPTION

3 Finance NEW SOUTH WALES

VICTORIA
OPTION

0 Reception

The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide.
Reach us on email Reach us by mail / visit our offices
ausales@sales.grundfos.com SA Office (Head Office) VIC Office
Pre Sales Selection, Spare Parts Selection, 515 South Road Unit 12 / 18-22 Lexia Place
Quotations and Support Regency Park, SA 5010 Mulgrave, VIC 3170

auorders@sales.grundfos.com WA Office QLD Office


New Orders, Order Follow-up, Unit 1 / 7 Marchesi Street 6 Aliciajay Circuit
Extranet and Credit Requests Kewdale, WA 6105 Luscombe, QLD 4207

auservice@grundfos.com NSW Office


After Sales Service & Technical Unit 2 / 4 Avenue of Americas
Support, Warranty & Repair Newington Business Park
Newington, NSW 2127

Connect online Connect with Grundfos


grundfos.com/au/where-to-buy/pricelist
Price Book @grundfosforinstallers @grundfospumpsanz

grundfos.com/au/where-to-buy/extranet
Online Orders @grundfos

You might also like