Professional Documents
Culture Documents
RS-USB2 USER MANUEL - Rev01
RS-USB2 USER MANUEL - Rev01
Entes RS-USB2 Converter connects the computer to the devices, which communicate on RS485 communication port via
USB port. In this case, you can use your USB port as a standart serial port (COM port) and communicate with devices
which are connected to the computer.
Technical Specifications
USB
Pin Function
DATA(B) RS485 data (-)
DATA(A) RS485 data (+)
FGND Ground
Data (B)
Data (A)
FGND
USB
Data (B)
Data (A)
FNGD
2-) To specify the location of drivers, select the Install from a list or specific
location (Advanced) option and press Next button.
6-) After the installation, press Finish button to complete the installation.
3-) In the dialog box that comes up, select the location of driver file and
press Next button.
7-) Later, required driver files for serial port must be installed. In order to
install required files, repeat previous steps (2nd 5th steps). Press Finish
button to complete the installation.
2-) In the dialog box that comes up, press Next button.
3-) In Found New Hardware Wizard dialog box, select the Search for a
suitable driver for my device option and press Next button.
6-) Later, required driver files for serial port must be installed. In order to
install required files, repeat previous steps (2nd 5th steps). Press Finish
button to complete the installation
1-) Connect the USB Converter to the PC USB port. Windows detects your
hardware automatically.
5-) After the installation, below dialog box appears. Press Next button to
complete the installation.
2-) To specify the location of suitable drivers, select the Search for the best
driver for your device option and press Next button.
6-) Later, required driver files for serial port must be installed. In order to
install required files, repeat previous steps (2nd 5th steps).
Press Finish button to complete the installation.
3-) Specify the folder in installation CD for search location.