The technician was asked to write a report about some faulty electrical equipment in the factory. Upon inspection, the technician found that a water pipe was leaking because it was bent. The flow sensor was dirty and corroded from dust and mud exposure. Finally, the sensor meter was corroded from extended use. To address the issues, the technician installed a new PCV pipe, cleaned the flow sensor, and replaced the sensor meter. The report recommends checking and protecting the equipment regularly to prevent future defects.
The technician was asked to write a report about some faulty electrical equipment in the factory. Upon inspection, the technician found that a water pipe was leaking because it was bent. The flow sensor was dirty and corroded from dust and mud exposure. Finally, the sensor meter was corroded from extended use. To address the issues, the technician installed a new PCV pipe, cleaned the flow sensor, and replaced the sensor meter. The report recommends checking and protecting the equipment regularly to prevent future defects.
The technician was asked to write a report about some faulty electrical equipment in the factory. Upon inspection, the technician found that a water pipe was leaking because it was bent. The flow sensor was dirty and corroded from dust and mud exposure. Finally, the sensor meter was corroded from extended use. To address the issues, the technician installed a new PCV pipe, cleaned the flow sensor, and replaced the sensor meter. The report recommends checking and protecting the equipment regularly to prevent future defects.
The technician was asked to write a report about some faulty electrical equipment in the factory. Upon inspection, the technician found that a water pipe was leaking because it was bent. The flow sensor was dirty and corroded from dust and mud exposure. Finally, the sensor meter was corroded from extended use. To address the issues, the technician installed a new PCV pipe, cleaned the flow sensor, and replaced the sensor meter. The report recommends checking and protecting the equipment regularly to prevent future defects.
Topic: You are a technician at GOSHU KOHSAN company. Your manager asks you to write a report about the defects of some faulty electrical equipment in your factory
GOSHU KOHSAN (VIETNAM)
Date: 23/04/2023 TROUBLE/INCIDENT/ACCIDENT REPORT OF SOME FAULTY ELECTRICAL EQUIPMENT IN FACTORY
1. Project Name-Work Item:
-Check factory equipment 2. Trouble Notification: -Time of trouble happened: 3 p.m yesterday -Location: Factory F2 3.Trouble/Incident/Accident Description: First, I checked the water pipe. I found that it was leaked. After that, I checked the water vales and it was in good condition. Then I examined the pump and it worked without incident as well. Next, I checked the flow sensor and found that it was dirty and corroded. Finally, I tested the sensor meter and it was corroded. 4. Causes: -The water pipe: because of being bent -The flow sensor: because it exposed to dust and mud -The sensor meter: because it was used for too long 5. Action/trouble solving: I installed a new PCV pipe inserted. Then I cleaned the flow sensor. Next, I had to replace a new the sensor meter 6.Remcomendation/Remark: These equipments need to be checked and protect regularly. Reported By: Plant team engineer Le Tri Thanh