Professional Documents
Culture Documents
Usefull List Welding Code
Usefull List Welding Code
Usefull List Welding Code
ENGINEERS
See discussions, stats, and author profiles for this publication at: https://www.researchgate.net/publication/371043748
CITATIONS READS
0 1,299
1 author:
Dzevad Hadzihafizovic
University of Sarajevo
335 PUBLICATIONS 7 CITATIONS
SEE PROFILE
Some of the authors of this publication are also working on these related projects:
All content following this page was uploaded by Dzevad Hadzihafizovic on 26 May 2023.
Code Description
ASME BPVC Section II Part C: Specifications for Welding Rods, Electrodes, and Filler Metals.[1]
ASME BPVC Section V Nondestructive Examination
ASME BPVC Section IX Welding and Brazing Qualifications
Buttwelding ends
ASME B16.25
magi
Standard
Description
Number
AS/NZS 1554.1 Structural steel welding - Welding of steel structures
AS/NZS 1554.2 Structural steel welding - Stud welding (steel studs to steel)
AS/NZS 1554.3 Structural steel welding - Welding of reinforcing steel
AS/NZS 1554.4 Structural steel welding - Welding of high strength quenched and tempered steels
Structural steel welding - Welding of steel structures subject to high levels of fatigue
AS/NZS 1554.5
loading
Standard
Description
Number
AS/NZS 1554.6 Structural steel welding - Welding stainless steels for structural purposes
AS/NZS 1554.7 Structural steel welding - Welding of sheet steel structures
AS/NZS 3992 Pressure equipment - Welding and brazing qualification
Standard
Description
Number
BS 499-1 Welding terms and symbols. Glossary for welding, brazing and thermal cutting
BS 499-2C Welding terms and symbols. European arc welding symbols in chart form
BS 2633 Specification for Class I arc welding of ferritic steel pipework for carrying fluids
BS 2971 Specification for class II arc welding of carbon steel pipework for carrying fluids
Specification for welding of steel pipelines on land and offshore - Part 1: Carbon and
BS 4515-1
carbon manganese steel pipelines
Specification for welding of steel pipelines on land and offshore. Duplex stainless steel
BS 4515-2
pipelines
Structural use of steel and aluminium. Recommendations for the execution of steel
PD 6705-2
bridges to BS EN 1090-2
Structural use of steel and aluminium. Recommendations for the execution of
PD 6705-3
aluminium structures to BS EN 1090-3
International Organization for Standardization (ISO) Standards
International Organization for Standardization (ISO) has developed over 18500 standards and over 1100
new standards are published every year.[7] The following is a partial list of the standards specific to
welding:
Standard
Description
Number
ISO 2553 Welded, brazed and soldered joints - symbolic representation on drawings (1992)
Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and
ISO 2560
fine grain steels. Classification
Covered electrodes for manual arc welding of creep-resisting steels - Code of symbols for
ISO 3580
identification
Covered electrodes for manual arc welding of stainless and other similar high alloy steels -
ISO 3581
Code of symbols for identification
ISO 3834 Quality requirements for fusion welding of metallic materials, five parts.
ISO 4063 Welding and allied processes - Nomenclature of processes and reference numbers
Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding
ISO 5817
excluded). Quality levels for imperfections
Welding and allied processes — Classification of geometric imperfections in metallic
ISO 6520-1
materials — Part 1: Fusion welding
Welding and allied processes — Classification of geometric imperfections in metallic
ISO 6520-2
materials — Part 2: Welding with pressure
ISO 6947 Welds. Working positions. Definitions of angles of slope and rotation
ISO 9606 Qualification test of welders — Fusion welding, parts 1 to 5
Welding and allied processes. Recommendations for joint preparation. Manual metal-arc
ISO 9692-1 welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of
steels
ISO 9692-2 Welding and allied processes. Joint preparation. Submerged arc welding of steels
Welding and allied processes. Joint preparation. Part 3: TIG and MIG welding of
ISO 9692-3
aluminium and its alloys
Petroleum and natural gas industries - Pipeline transportation systems - Welding of
ISO 13847
pipelines
Welding - Guidance on the measurement of preheating temperature, interpass temperature
ISO 13916
and preheat mainteanance temperature
ISO 13918 Welding - Studs and ceramic ferrules for arc stud welding
Welding - Electron and laser-beam welded joints - Guidance on quality level for
ISO 13919-1
imperfections - Part 1: Steel
Welding - Electron and laser-beam welded joints - Guidance on quality level for
ISO 13919-2
imperfections - Part 2: Aluminium and its weldable alloys
Welding - General tolerances for welded constructions - Dimensions for lengths and angles
ISO 13920
- Shape and position
ISO 14112 Gas welding equipment - Small kits for gas brazing and welding
Welding consumables — Gases and gas mixtures for fusion welding and allied processes.
ISO 14175
Replaced EN 439:1994 in Europe.
Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of
ISO 14341
non alloy and fine grain steels. Classification
ISO 14554 Resistance welding
Standard
Description
Number
ISO 14744 Electron beam welding, six parts
ISO 15607 Specification and qualification of welding procedures for metallic materials - General rules
ISO/TR
Welding - Guidelines for a metallic material grouping system
15608
Specification and qualification of welding procedures for metallic materials - Welding
ISO 15609
procedure specification, five parts.
Specification and qualification of welding procedures for metallic materials —
ISO 15610
Qualification based on tested welding consumables
Specification and qualification of welding procedures for metallic materials —
ISO 15611
Qualification based on previous welding experience
Specification and qualification of welding procedures for metallic materials —
ISO 15612
Qualification by adoption of a standard welding procedure
Specification and qualification of welding procedures for metallic materials —
ISO 15613
Qualification based on pre-production welding test
Specification and qualification of welding procedures for metallic materials - Welding
ISO 15614
procedure test, 13 parts.
Gas welding equipment. Acetylene manifold systems for welding, cutting and allied
ISO 15615
processes. Safety requirements in high-pressure devices
Qualification testing of welders for under-water welding. Diver-welders for hyperbaric wet
ISO 15618-1
welding
Qualification testing of welders for under-water welding. Diver-welders and welding
ISO 15618-2
operators for hyperbaric dry welding
ISO 17635 Non-destructive testing of welds. General rules for metallic materials
ISO/TR
Welding — Grouping systems for materials — European materials
20172
ISO/TR
Welding — Grouping systems for materials — American materials
20173
ISO/TR
Welding — Grouping systems for materials — Japanese materials
20174
Welding for aerospace applications. Qualification test for welders and welding operators.
ISO 24394
Fusion welding of metallic components
Standard
Description
Number
EN 287-1 Qualification test of welders — Fusion welding — Part 1: Steels[9] [10]
Execution of steel structures and aluminium structures - Part 1: Requirements for
EN 1090-1
conformity assessment of structural components
Execution of steel structures and aluminium structures - Part 2: Technical requirements for
EN 1090-2
steel structures
EN 1090-3 Execution of steel structures and aluminium structures - Part 3: Technical requirements for
Standard
Description
Number
aluminium structures
Welding — Recommendations for welding of metallic materials — Part 1: General
EN 1011-1
guidance for arc welding
Welding — Recommendations for welding of metallic materials — Part 2: Arc welding of
EN 1011-2
ferritic steels
Welding — Recommendations for welding of metallic materials — Part 3: Arc welding of
EN 1011-3
stainless steels
Welding — Recommendations for welding of metallic materials — Part 4: Arc welding of
EN 1011-4
aluminium and aluminium alloys
EN 1011-5 Welding. Recommendations for welding of metallic materials. Welding of clad steel
EN 1011-6 Welding. Recommendations for welding of metallic materials. Laser beam welding
Welding — Recommendations for welding of metallic materials — Part 7: Electron beam
EN 1011-7
welding
EN 1011-8 Welding. Recommendations for welding of metallic materials. Welding of cast irons
Welding personnel. Approval testing of welding operators for fusion welding and
EN 1418
resistance weld setters for fully mechanized and automatic welding of metallic materials
EN 1708-1 Welding. Basic welded joint details in steel. Pressurized components.
EN 1708-2 Welding. Basic weld joint details in steel. Non-internal pressurized components.
Welding. Basic weld joint details in steel. Clad, buttered and lined pressurized
EN 1708-3
components.
EN 1993-1-8 Eurocode 3: Design of steel structures – Part 1-8: General – Design of joints
EN 13133 Brazing - Brazer approval
Welded, brazed and soldered joints – Symbolic representation on drawings. (CEN version
EN 22553
of ISO 2553)
Additional requirements for welding exist in CEN codes and standards for specific products, like EN
12952, EN 12953, EN 13445, EN 13480, etc.
Code Description
DIN 1910-100 Welding; terms dependent on materials for metal welding
Schweißgeeignete Feinkornbaustähle - Richtlinien für die Verarbeitung besonders für
SEW 088
das Schmelzschweißen", Stahlinstitut VDEh
Merkblatt DVS Metall-Schutzgasschwißen von Feinkornbaustählen", Deutsche Verband für
0916 Schweißtechnik e.V.