Professional Documents
Culture Documents
Cat 16H
Cat 16H
Cat 16H
16H
Caterpillar 16H Motor Grader blends productivity and durability to give you
the best return on your investment. The Cat 3406E engine, power shift
transmission and load-sensing hydraulics are designed to work together to
deliver top productivity in all applications.
Engine
Engine Model 3406 TA
Base Power (all gears) Net 275 hp / 205 kW
VHP - gears 1-3 Net 275 hp / 205 kW
Displacement 890.95 in3 / 14.6 L
Speed @ rated power 1850 RPM / 1850 RPM
Derating altitude 10006.53 ft / 3050 m
Moldboard
Blade Width 16 ft / 4.88 m
Moldboard Height 30.98 in / 787 mm
Thickness 0.98 in / 25 mm
Arc radius 16.26 in / 413 mm
Cutting edge - width 7.99 in / 203 mm
Cutting edge - thickness 0.98 in / 25 mm
Weights
Gross Vehicle Weight - base 54559.94 lb / 24748 kg
Gross Vehicle Weight - max 54559.94 lb / 24748 kg
Operating Weight 54560 lb / 24748 kg
Operating Specifications
Top Speed - Forward 27.7 mph / 44.5 kph
Top Speed - Reverse 26.3 mph / 42.3 kph
Turning Radius (outside front tires) 27 ft / 8.2 m
Steering range - left/right 50
Articulation Angle - left/right 20
Fwd. 1st 2.42 mph / 3.9 kph
Fwd. 2nd 3.42 mph / 5.5 kph
Fwd. 3rd 4.6 mph / 7.4 kph
Fwd. 4th 6.65 mph / 10.7 kph
Fwd. 5th 10.07 mph / 16.2 kph
Fwd. 6th 14.11 mph / 22.7 kph
Fwd. 7th 19.08 mph / 30.7 kph
Fwd. 8th 27.65 mph / 44.5 kph
Rev. 1st 2.3 mph / 3.7 kph
Rev. 2nd 3.23 mph / 5.2 kph
Rev. 3rd 4.35 mph / 7 kph
Rev. 4th 6.34 mph / 10.2 kph
Rev. 5th 9.57 mph / 15.4 kph
Rev. 6th 13.42 mph / 21.6 kph
Rev. 7th 18.14 mph / 29.2 kph
Rev. 8th 26.28 mph / 42.3 kph
Service Refill
Fuel Capacity 130 gal / 492 L
Cooling System 16.91 gal / 64 L
Hydraulic system - total 34.34 gal / 130 L
Engine Oil 8.98 gal / 34 L
Differential / Final Drives 36.98 gal / 140 L
Tandem housing (each) 31.96 gal / 121 L
Hydraulic System
Pump type Variable displacement, piston
Pump output 56.53 gal/min / 214 L/min
Maximum system pressure 3502.66 psi / 24150 kPa
Standby Pressure 268.32 psi / 1850 kPa
Frame
Blade Range
Circle centershift - right 22.05 in / 560 mm
Circle centershift - left 27.17 in / 690 mm
Moldboard sideshift - right 31.1 in / 790 mm
Moldboard sideshift - left 25.59 in / 650 mm
Maximum blade position angle 90
Blade tip range (forward) 40
Blade tip range (backward) 5
Maximum shoulder reach outside of tires - right 90.98 in / 2311 mm
Maximum shoulder reach outside of tires - left 90.98 in / 2311 mm
Maximum lift above ground 16.5 in / 419 mm
Maximum depth of cut 18.5 in / 470 mm
Tandems
Height 25.51 in / 648 mm
Width 9.29 in / 236 mm
Sidewall thickness - inner 0.87 in / 22 mm
Sidewall thickness - outer 0.87 in / 22 mm
Drive chain pitch 72.44 in / 1840 mm
Dimensions
Ground clearance at trans. case 25.98 in / 660 mm
Length - front tire to end of rear frame 393.31 in / 9990 mm
Length - front axle to moldboard 122.05 in / 3100 mm
Length - front axle to mid tandem 273.98 in / 6959 mm
Width - tire centerlines 97.24 in / 2470 mm
Width - outside rear tires 117.64 in / 2988 mm
Width - outside front tires 121.1 in / 3076 mm
©2004 Caterpillar All Rights Reserved. Legal Notice Website Privacy Statement Copyright Agent Contact Us Incident Reporting