Professional Documents
Culture Documents
Tomcat Catalogue 2019 Autumn LowRes
Tomcat Catalogue 2019 Autumn LowRes
Under
Pressure
In the beginning 4
The Structure Behind Performer Flying 6
New West Coast office and warehouse 8
Products
Box Truss 10
Triangle Truss 36
Folding Box Truss 48
Touring Truss 54
Truss Circles 74
Dance tower 80
Spot chair 81
Rigging Hardware 82
Sound Delay Towers 90
Ground Support Systems 98
Roofs 104
Barriers 136
1987, TOMCAT has embodied the spirit of One of the keys to TOMCAT’s success with custom
innovation. Its long-standing commitment projects is a fully staffed in-house design department that
works closely with customers, designers and consulting
to customer service and reputation for engineering firms to maintain the highest standards
manufacturing products of the highest of quality and safety. TOMCAT ensures that each and
quality, have given TOMCAT a worldwide every project is engineered to perform with “Strength
Under Pressure”. After more than 25 years of setting the
reputation as a leader in the truss standard, TOMCAT has proven its claim of being “Tried,
industry. Tested, Trusted” throughout the industry, over a wide range
of projects and across the globe.
As the demand for TOMCAT products has grown through A broad range of projects that extend all the way to
the years, so too has the company. This growth is apparent Broadway and the West End
in both the size of the physical plant and the number
of employees. TOMCAT’s factory and headquarters are Just as TOMCAT has grown and expanded into other
currently located in Knoxville, TN. This office is perfectly countries, so too has the scope of projects it has been
positioned to carry out sales and distribution in the involved with. The touring entertainment industry is still
eastern half of the country. The second, and newest a large part of TOMCAT’s activities. High profile rock-and-
TOMCAT office, is located in Thousand Oaks, CA, which is roll shows is an area where TOMCAT exceeds, and it has
only about a one hour drive from Los Angeles. The “West” also manufactured items for touring country music artists.
location is loaded with sales and administration offices, It’s even extended its reach to touring Broadway and West
a dedicated “West” sales team, and a fully stocked End shows such as Mamma Mia, The Producers, Aida, and
warehouse with 25000 sq ft of inventory. They are fully Lion King.
responsible for sales and distribution in the Western half
of the country and western Canada. Trade show displays – Compact, light and easy to transport
In 2014, TOMCAT became part of the Area Four Industries Another type of touring show that benefits from TOMCAT
group, the largest manufacturing group in the world for craftsmanship is the trade show market. Trade show
aluminum modular support structures and staging systems. displays are becoming ever larger and increasingly complex,
yet have the same requirements for easy assembly and quick
Continuous evolution disassembly. TOMCAT meets these needs while keeping
the structures compact, light and easy to transport.
The wide range of projects that have been entrusted to
TOMCAT over the years have also continued to evolve. TOMCAT has extensive experience in producing a wide
TOMCAT initially established its strong reputation for variety of trade show booths for many different types
providing trussing and related items to major touring acts of clients. This includes small and relatively simple
in the rock-and-roll industry. The manufacture of portable structures for hospital equipment suppliers, to large and
outdoor roof systems was one of the company’s early complicated structures for major computer and television
successes, and continues to be a major part of the TOMCAT programming companies.
product line today.
Some of our most technically challenging projects are National Standard for Performer Flying was referenced
those where performers are suspended from overhead throughout the design process when it came to the flying
truss structures. In fact, TOMCAT had the opportunity to elements of the show. Using a worst case scenario, some
be involved in a ground up design of a new show where the of the structure components had to be highly customized
flying of both performers and scenery took center stage. The to support the loads. All structure hoists were upgraded to
initial communication with the customer was fairly simple. A 2-ton chain hoists and each truss member in the system
sketch was sent over with a truss section and track similar to had to be reviewed. In some components, truss chords were
other components that we had manufactured for them in the upgraded to ½” wall thickness to get the performance that
past, with the simple question of cost for the items in the was required per the engineering review.
drawing. It wasn’t until a few months later when the show's
storyboard was sent over that we knew we were about to set The towers of the system has to be multi-functional as well.
off on a special journey to design something quite amazing. Technicians required access to the winches in the main
structure, safety nets had to be tensioned during the show
It was determined that the structure was going to be and scenic elements still needed to be able to move within
supported both from the ground and from the rigging the structure. The bottom tower sections were designed to
above. However, the suspended load of the complete house the required ballast to hold the towers in place during
structure was going to be high enough that we didn’t use. Keeping in mind there is not a fixed connection at the top
want any of the “legs” of the structure to transfer load of to the main grid, we had a vertical cantilever that needed to
the suspended grid overhead. We were already running remain stable during show operation.
into capacity issues in venues and this was going to be
a critical design criteria for us to maintain. So what we After the design was finally set for the structure, production
landed on was a slip connection that would allow the crew began. This project required 3 months of processing through
to assemble the grid from the ground using the hoists, the various departments in the shop and to receive a powder
then sit the towers down on the ground. There was 12” of coating. TOMCAT takes pride in having the ability to sit down
variable adjustment built into the slip allowing the crew +/- with customers, design these types of projects based on the
6” of adjustability from their desired trim height. needs of the show, and then fabricate high quality products.
It’s not always easy and things never go as planned on these
Flying both performers and scenic elements were going projects, as our Mission Statement says: “Strength Under
to be a large part of the show. So it was decided to use Pressure, it’s engineered into Everything We Do”.
the maximum winch capacity for both lift and travel to set
the demands on the structure. ANSI E1.43, the American
We now have a new TOMCAT office and warehouse that’s just a stone’s throw from
our many customers in the western United States and Canada! Located in Thousand
Oaks, California (one hour drive from LAX and downtown Los Angeles), we provide local
customer service, technical support and rapid physical product shipments from our
25,000 sq ft office and warehouse space.
Customers in this part of the country now have instant and convenient access to
TOMCAT products in the most popular sizes and lengths. Regular shipments from our
factory in Tennessee ensure the West warehouse is always stocked up and products
always ready to ship.
Strength
Under
Staging and Support Systems Pressure 11
(25.75)
(304.80)
10.14”
(309.52)
(25.75)
10.14”
(25.75)
10.14”
(25.75)
10.14”
PLAN PLAN
PLAN PLAN ELEVATION
ELEVATION
Plan
PLAN ELEVATION
Elevation
ELEVATION
PLAN
PLAN VIEWS
VIEWS Connector
Connector
PLANVIEWS
VIEWS Orientation
Orientation
Connector Specified
Specified
Orientation by by Customer
Customer
Specified ELEVATION
PLAN PLAN Connector Orientation Specified bybyCustomer
Customer
PLAN VIEWS Connector Orientation Specified by Customer ELEVATION
24.1”
24.1” (61.21)
(61.21)
24.1”(61.21)
(61.21)
PLAN VIEWS Connector Orientation Specified by Customer 24.1” 10.14”10.14”
24.1” (61.21) 10.14” 10.14”
22.24”
22.24” (56.48)(56.48)
(56.48)
22.24” (25.75)(25.75)
(25.75)
17.49”
17.49” (44.42)(44.42)
(44.42)
17.49” 24.1”
24.1” (61.21)
(61.21) 22.24” (56.48) 10.14” (25.75)
17.49” (44.42) 24.1”(61.21)
24.1” (61.21) 24.1” (61.21)
22.24” (56.48)
17.49” (44.42) (25.75)
10.14”
16.56”
16.56” (42.06)(42.06)
(42.06)
16.56” 24.1”
22.24”
22.24” (61.21)
(56.48)(56.48)
(56.48)
16.56” (42.06) 22.24”
22.24” (56.48) 22.24” (56.48) (25.75)
22.24” (56.48)
17.49” (44.42)
(56.48)
24.1” (61.21)
22.24” (56.48)
24.1” (61.21)
16.56” (42.06)
(61.21)
24.1” (61.21)
22.24” (56.48)
22.24” (56.48)
24.1” (61.21)
(35.00)
13.78”
(35.00)
13.78”
(35.00)
22.24” (56.48)
(43.48)
16.19” (41.12)
(43.48)
16.19” (41.12)
13.78”
(43.48)
17.12” (41.12)
(43.48)
17.12” (41.12)
(61.21)
17.12” (43.48)
16.19” (41.12)
17.12” (43.48)
16.19” (41.12)
(35.00)
16.56” (42.06)
13.78”
22.24” (56.48)
17.12” (43.48)
16.19” (41.12)
17.12” (43.48)
16.19” (41.12)
(35.00)
13.78”
(56.48)
(43.48)
(41.12)
(43.48)
(41.12)
24.1” (61.21)
22.24”
24.1”
(35.00)
13.78”
17.12” (43.48)
(41.12)
17.12” (43.48)
(41.12)
17.12”
16.19”
17.12”
16.19”
24.1”
22.24”
17.12”
16.19”
17.12”
16.19”
END END
END END
16.19”
16.19”
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block END
VIEW VIEW
VIEW
End View
VIEW
2-Way
2-Way Corner
Corner
2-Way Block Block
Block
Corner 3-Way
3-Way Corner
Corner Block Block
Block 4-Way
4-Way Corner
Corner
4-Way Block Block
Block
Corner END
VIEW
2-Way Corner Block 3-Way
3-Way Corner
Corner Block 4-Way Corner Block
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block VIEW
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block
12
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 766 7660 (3475) 0.15 3831 (1738) 0.12 2873 (1303) 0.16 1916 (869) 0.15
20 (6.09) 186 3720 (1687) 0.61 1863 (845) 0.49 1397 (634) 0.63 932 (423) 0.58
30 (9.14) 78 2340 (1061) 1.36 1184 (537) 1.12 888 (403) 1.41 592 (269) 1.32
40 (12.21) 41 1640 (744) 2.44 827 (375) 2.03 620 (281) 2.50 413 (187) 2.35
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
Plan Views
120”
120” ODOD
(304.8)
(304.8) 120” OD
120” OD120” OD 120” OD
(304.8)(304.8) (304.8)
120”(304.8)
OD
(30.48)
(30.48)
(30.48)
(304.8)
(30.48)
12”
12”
12”
12”
(30.48)
(30.48)
(30.48)
(30.48)
(30.48)
(30.48)
(30.48)
(30.48)
12”
12” 12”
12”
12”
12”12”
12”
12”
12”
(30.48)
(30.48)
PLAN
PLAN
Plan ELEVATION
ELEVATION
Elevation
PLAN ELEVATION ELEVATION
PLAN PLAN PLAN ELEVATION ELEVATION
PLAN
PLAN VIEWS PLAN
VIEWS 5-Way
5-Way & 6-Way
& 6-Way Available
Available ELEVATION
PLAN VIEWS 5-WayPLAN
& PLAN
6-Way VIEWS 5-Way & 6-Way Available
PLAN VIEWS 5-Way & Available
VIEWS
6-Way5-Way
Available
& 6-Way Available
12”12”
PLAN VIEWS 5-Way & 6-Way Available
12.75” 12.75” 12.75” 19.30” (49.02) 12” 12” (30.48) 12” 12”
(30.48)
12.75” 12.75”
12.75”12.75” 12.75”
12.75”12.75” 12.75” 19.30” (49.02) 19.30” (49.02) (30.48)(30.48) (30.48)
(30.48)
(32.39)
12.75” 12.75”
(32.39) 12.75” (32.39)
12.75” 12.75” (32.39)
12.75” 12.75” 19.30” 19.30”
(49.02)(49.02)
Horz. 19.30” (49.02)
& Vert.
(32.39) (32.39) (32.39) (32.39) (32.39) Horz. & Vert. 12”
(32.39)(32.39) (32.39) (32.39)(32.39) (32.39) (32.39)(32.39) Vert. & Vert. Horz.Horz.
(32.39) Horz. &Horz. & Vert.
& Vert.
(30.48)
(30.48)
(30.48)
(30.48)
(30.48)
Horz.
Horz.
12” 12”
Horz. &
(31.45)
(32.39)
12”
12.38”
12.38”
12.75”
12”
12”
(31.45)
(32.39)
(30.48)
12.38”
12.38”
12.75”
Horz.
(31.45)
(32.39)
12.38”
12.38”
12.75”
(30.48) 12”
(31.45)
(31.45)
(32.39)
(31.45)
(31.45)
(31.45)
(31.45)
(32.39)
(32.39)
12”
12.38”
12.38”
12.75”
12.38”
12.38”
12.38”
12.38”
12.75”
12.75”
(30.48)
(30.48)
(30.48)
12”
(30.48)
12”
& Vert.
& &Vert.
12”
12”
12”
Horz. & Vert.
END
Vert.
END END
(31.45)
(31.45)
(32.39)
12.38”
12.38”
12.75”
Vert.
(30.48)
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 446 4460 (2023) 0.14 2231 (1012) 0.11 1673 (759) 0.14 1116 (506) 0.13
20 (6.09) 106 2120 (962) 0.54 1063 (482) 0.44 797 (362) 0.56 531 (241) 0.52
30 (9.14) 43 1290 (585) 1.22 650 (295) 1.01 487 (221) 1.25 325 (147) 1.17
40 (12.21) 21 840 (381) 2.16 426 (193) 1.85 319 (145) 2.21 213 (97) 2.10
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
120” 120”
Plan Views – Connector Orientation Specified by Customer 120”
(304.80)
(304.80)
(304.80)
120”
120”
(304.80)
(304.80)
(30.48) 12”
(30.48)(30.48)
(30.48)
12”
12”
12” (30.48)
120”
12”
Plan
PLAN PLAN VIEWS
VIEWS Connector Orientation Specified by Customer Elevation
PLAN VIEWS Connector
PLAN ConnectorOrientation
OrientationSpecified
Specifiedby
byCustomer
Customer ELEVATION
(30.48)
PLAN ELEVATION
12”
12” 12”
12”
(30.48)(30.48)
PLAN
PLAN VIEWS
VIEWS Connector
Connector Orientation
Orientation Specified
Specified by Customer
by Customer 29.50” (74.93) (30.48)
29.50”
29.50”(74.93)
(74.93)
20.88” 20.88”
(53.04) (53.04) 29.50” 29.50” (74.93) 27.38” (69.55) 12”12”
PLAN 20.88” (53.04) 29.50”(74.93)
(74.93) 27.38” (69.55)
ELEVATION
(30.48) 12”
27.38” (69.55)
(30.48)(30.48)
(30.48)
(30.48)
(30.48)
12”
12”
19.69”
19.69”(50.01)
(50.01) 27.38”
27.38”(69.55)
(69.55)
PLAN VIEWS 20.88” (53.04)
20.88”Connector
(53.04) Orientation Specified by Customer
29.50”
29.50” (74.93)
(74.93) 27.38” (69.55)
27.38” (69.55)
29.50” (74.93)
27.38” (69.55)
(74.93)(74.93)
(74.93)(69.55)
29.50” (74.93) 29.50” (74.93)
(69.55)
20.06” (50.95)
20.96” (53.24)
19.69” (50.01)
(53.24)(50.95)
20.88” (53.04)
12”
12”
(53.24)(53.24)
(53.04)(50.01)
(50.95)
(53.04)(53.04)
END(30.48)
END VIEW
29.50” (74.93) ENDVIEW
VIEW
27.38” (69.55)
27.38” (69.55)
29.50” 29.50”
27.38”
20.06” (50.95)
(50.95)
20.88” (53.04)
19.69” (50.01)
20.96” 20.06”
20.96” 20.96”
29.50” (74.93)
19.69”
20.06” (50.95) 20.06”
20.88” 20.88”
27.38” (69.55)
19.69” (50.01) 19.69”
(30.48)
END
END VIEW
VIEW
12”
20.88”
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block End View
2-Way Corner Block 3-Way Corner Block 4-Way 4-Way Corner Block
2-Way
2-WayCorner
CornerBlock
Block 3-Way
3-WayCorner
CornerBlock
Block 4-WayCorner
CornerBlock
Block END VIEW
2-Way
2-Way Corner
Corner Block
Block 3-Way
3-Way Corner
Corner Block
Block 4-Way
4-Way Corner
Corner Block
Block
16
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 1148 11480 (5207) 0.24 7785 (3531) 0.26 5742 (2604) 0.32 3828 (1736) 0.30
20 (6.09) 309 6180 (2803) 1.04 3099 (1405) 0.84 2324 (1054) 1.07 1549 (702) 1.00
30 (9.14) 111 3330 (1510) 2.00 2089 (947) 2.00 1226 (556) 2.00 879 (398) 2.00
40 (12.21) 41 1640 (743) 2.62 824 (373) 2.20 614 (278) 2.67 412 (186) 2.52
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
Custom length truss and custom corner designs, inc. angles, available upon request.
(45.72)
(45.72)
(45.72)
18”
18”
18”
(30.48)
(30.48)
(30.48)
(30.48)
(30.48)
(30.48)
18”
(45.72)
12”(30.48)
12”
12”
12”(30.48)
12”
12”
(30.48)
(45.72)
(30.48)
12”
12”
18”
18”
(30.48)
(30.48)
12”
12”
12”
12”
(46.69)
(46.69)
(46.69)
(46.69)
(46.69)
(47.63)
(47.63)
(47.63)
18.38”
18.38”
18.38”
18.38”
18.38”
18.38”
18.75”
18.75”
18.75”
(46.69)
(46.69)
(47.63)
18.38”
18.38”
18.75”
(45.72)
(46.69)
(46.69)
(47.63)
18.38”
18.38”
(46.69)
(46.69)
18”
18.75”
(47.63)
18.38”
18.38”
(30.48)
18.75”
(30.48)
12”
12”
Horizontal
Horizontal Horizontal
2-Way ELEVATION Horizontal EndEND
View
2-WayCorner
2-Way Block
CornerCorner
Block
2-Way PLAN
BlockCorner 3-Way Corner Block
Block
3-Way 3-Way
CornerCorner
Block
3-Way 4-Way4-Way
BlockCorner Block
4-Way
CornerCorner
Block Corner
4-Way
Block Block
Corner Variable
Block Variable
Horizontal
Horizontal
CornerCorner
Variable Variable Corner
Corner
Horizontal
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block Variable Corner VIEW
2-Way Corner2-Way
Block Corner Block Variable Corner
Block Corner BlockVariable Corner
Block Corner Block4-Way Corner4-Way
3-Way Corner3-Way
PLAN VIEWS
5” 6.
18 18.75” 18.75” 18.75” 6.7 15) (17 75”
(47.63) (47.63) (47.63) . .15
(17 )
(46.69)
(46.69)
(47.63)
18.38”
18.38”
18.75”
Horizontal
Loading chart
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 445 4450 (2019) 0.14 2229 (1011) 0.11 1672 (758) 0.14 1115 (506) 0.13
20 (6.09) 105 2100 (953) 0.54 1058 (480) 0.44 794 (360) 0.56 529 (240) 0.52
30 (9.14) 42 1260 (572) 1.20 643 (292) 1.02 482 (219) 1.25 322 (146) 1.17
40 (12.21) 20 800 (363) 2.11 417 (189) 1.86 312 (142) 2.21 208 (94) 2.10
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
Custom length truss and custom corner designs, inc. angles, available upon request.
122.12” OD 120”
(318.18) (304.8)
122.12”
122.12”
OD OD
122.12” OD 120”
120” 120”
122.12” OD
(318.18)
(318.18) (318.18) 120”
(304.8)
(304.8) (304.8)ELEVATION
(318.18) (304.8)
(76.20)
(76.20)
(76.20)
30”
30”
30”
30”
47.50” (120.64)
(76.20)
38.88” (98.74)
30”
PLAN
PLANVIEWS
VIEWS
PLAN VIEWS Orientation
Connector
ConnectorConnector
Orientation
Orientation
Specified
Specified
bySpecified
by
Customer
Customer
by Customer
39.00” (99.05)
38.06” (96.68)
(30.48)
(30.48)
12”
12”
12”
PLAN 30”
12”
47.50”
47.50” (120.64)
47.50” (120.64)
(120.64)
47.50” (120.64) (76.20)
38.88”
38.88”
(98.74)
(98.74)
38.88” (98.74) 47.50”
47.50” 47.50” (120.64)
(120.64)
(120.64) 45.38”
45.38” (115.25)
45.38” (115.25)
(115.25)
38.88” (98.74) 47.50” (120.64) 45.38” (115.25)
PLAN VIEWS 37.69”
Connector
37.69” Orientation
(95.73)
(95.73)
37.69” Specified by Customer
(95.73) 45.38”
45.38” 45.38” (115.25)
(115.25)
(115.25)
45.38” (115.25) END
ENDVIEW
VIEW
END VIEW
(30.48)
12”
47.50” (120.64)
47.50”(115.25)
39.00” (99.05)
38.06” (96.68)
38.88” (98.74)
37.69” (95.73)
39.00” (99.05)
39.00”(96.68)
38.88” (98.74)
38.88”(95.73)
37.69”
47.50” (120.64)
45.38” (115.25)
39.00” (99.05)
38.06” (96.68)
38.88” (98.74)
37.69” (95.73)
2-Way Corner
2-Way
2-Way Block
Corner
Corner
2-Way
Block
Block
2-Way Corner Block
Corner Block 3-Way
3-WayCorner
3-Way
Corner
CornerBlock
3-Way
Block
Block
3-Way Corner Block
Corner Block 4-Way4-Way
4-Way
Corner Corner
Corner
4-Way
Block
Block Block
Corner Block
4-Way Corner Block
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
5 (1.52) 2272 11360 (5153) 0.03 11361 (5153) 0.05 5681 (2577) 0.04 3787 (1718) 0.04
10 (3.05) 1120 11200 (5080) 0.23 6299 (2857) 0.21 4724 (2143) 0.27 3150 (1429) 0.25
15 (4.57) 680 10200 (4626) 0.72 5106 (2316) 0.58 3112 (1412) 0.60 2489 (1129) 0.67
20 (6.09) 303 6060 (2749) 1.04 3036 (1377) 0.85 2277 (1033) 1.07 1518 (689) 1.00
25 (7.62) 192 4800 (2177) 1.67 2942 (1334) 1.63 1767 (802) 1.67 1267 (575) 1.67
30 (9.14) 105 3150 (1429) 2.00 1897 (860) 1.93 1157 (525) 2.00 830 (377) 2.00
35 (10.67) 60 2100 (953) 2.33 1229 (557) 2.20 778 (353) 2.33 558 (253) 2.33
40 (12.21) 34 1360 (617) 2.58 697 (316) 2.26 523 (237) 2.37 349 (158) 2.54
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
SLEEVE
Sleeve
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
20.5”
20.5”
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
20.5”
(52.07)
(52.07)
(52.07)
20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
Plan
PLAN PLAN PLAN ELEVATION Elevation
ELEVATION ELEVATION END VIEW END VIEW End ENDView VIEW
PLAN PLAN PLAN PLAN PLAN ELEVATION ELEVATION ELEVATION ELEVATION
ELEVATION END VIEW END VIEW END VIEW END VIEW END VIEW
PLAN&VIEWS
PLAN VIEWS 5-Way 6-WayPLAN
5-WayVIEWS
Available 5-Way
& 6-Way & 6-Way
Available
Sleeve Available
Version Sleeve Version
Sleeve Version
PLAN
6-WayVIEWS 5-Way
PLAN & 6-Way
VIEWS Available
5-Way & 6-Way Available
PLAN VIEWS
PLAN5-Way
VIEWS
& 6-Way
5-Way
PLANAvailable
&VIEWS Available
5-Way &Sleeve
6-Way Available
Version
Sleeve Version SleeveSleeve Version
Version Sleeve Version
21.25” 21.25” 21.25”
21.25” 21.25” 21.25”21.25” 21.25” 21.25”
(53.98) (53.98) 30.17”
(53.98) (76.63) 30.17” (76.63)30.17” (76.63) 6 6.
(53.98)
21.25” 21.25”
(53.98)
21.25”(53.98)
21.25” (53.98)
21.25”
21.25” 21.25” 21.25”(53.98)
21.25” (53.98)
21.25”
21.25” 21.25” 21.25” 21.25” 21.25” 5”& Vert.(76.63) 5” 6.75 .75” ) (1 .75” (17 75” 6
Horz. & (76.63)
Vert. Horz. & Vert. Horz.
6.7 30.17”
4”) 6.7 14(1) 7(76.63)
30.17” ”6
(53.98) (53.98) (53.98) (53.98) 30.17”
(53.98) 30.17” (76.63) 30.17”
(53.98) .1(76.63) 64.7 7.”146.775”7.14)
7. &.1Vert. 5”6..7154)(1 .75”
6.
(53.98) (53.98) (53.98)(53.98) (53.98) (53.98) (53.98) (53.98) (53.98)
Horz. & Vert.
Horz. & Vert. ( 1
Horz. 7 7 Horz.
5 & Vert.
7 5 ” (Horz.
1 ( ) 5 ( 1
7 5 ( 6 . 5 ) . 7
6 1174) ” 7.1
( (17 75”
6. &1Vert. ) 6. 4) 17 6”. 147) .”14 .14
. 4 .1 .14 7.1 (.1174 7. .14) 4) )
20.5”
20.5” (52.07)
7 7 1
Horz.
Horz. & Vert.
20.5”
) ) (
Horz. & Vert.
1 1 1
(53.03)
(53.03)
(53.98)
(53.03)
(53.03)
(53.98)
( ( (
20.88”
20.88”
21.25”
20.88”
20.88”
21.25”
(53.03)
(53.03)
(53.98)
20.88”
20.88”
21.25”
20.5” (52.07)
Horz. & Vert.
20.5” (52.07)
Horz. & Vert.
(53.03)
(53.03)
(53.98)
20.5” (52.07)
20.5” (52.07)
20.5”
20.88”
20.88”
21.25”
Horz.
Horz.
(53.03)
(53.03)
(53.98)
20.88”
20.88”
21.25”
(53.03)
(53.03)
(53.03)
(53.03)
(53.03)
(53.03)
(53.98)
(53.98)
(53.98)
20.88”
20.88”
20.88”
20.88”
20.88”
20.88”
21.25”
21.25”
21.25”
(52.07)
& Vert.
(52.07)
(52.07)
& Vert.
& Vert.
2-Way
2-Way Corner
2-Way Corner Block BlockCorner
3-Way BlockBlock
Corner 3-Way
3-Way Corner BlockCornerCorner
4-Way Block Block 4-Way
4-Way Corner BlockCorner Center
Block Pivot Center PivotCenter Pivot
Horizontal Horizontal Horizontal
3-Way3-Way Center Pivot
2-Way
2-WayCorner
Corner
2-WayBlock
Block 2-Way2-Way
Corner Block CornerCorner
3-Way 3-Way Block
2-Way
Corner
3-Way
Block Corner
Corner
Block
Corner Block
Block
Block 4-WayCorner
Corner Block
CornerBlock
3-Way
4-Way
Block
Corner 4-Way4-Way
CornerBlock
Block
4-Way Corner
Corner
Horiz.
Corner BlockBlock
4-Way Horiz.
Corner
Articulating
Center
Block Block
Pivot
Center Horiz.Center
Articulating
Block
Pivot Articulating
Block
Center Pivot
Variable Block
Pivot Center
Horiz.
Corner
Horizontal Pivot
Variable
Horizontal Variable
Corner Horizontal
Horizontal
Corner
Horizontal Variable Corner
Horizontal
Horiz. Articulating
Horiz. Block
Articulating
Horiz. Articulating
Horiz. Articulating
Block Horiz.
BlockArticulating
Articulating
Variable Block
Block
Corner
Variable CornerBlock Variable
Variable CornerCorner
Variable Corner
22
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 839 8390 (3806) 0.08 4744 (2152) 0.07 3558 (1614) 0.09 2372 (1076) 0.08
20 (6.09) 230 4600 (2087) 0.34 2306 (1046) 0.27 1729 (784) 0.35 1153 (523) 0.32
30 (9.14) 97 2910 (1320) 0.76 1464 (664) 0.62 1098 (498) 0.78 732 (332) 0.73
40 (12.21) 51 2040 (925) 1.36 1021 (463) 1.13 765 (347) 1.39 510 (231) 1.30
50 (15.24) 29 1450 (658) 2.10 737 (334) 1.80 553 (251) 2.16 369 (167) 2.05
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
SLEEVE
Sleeve
Plan Views – Connector Orientation Specified by Customer – 5-Way & 6-Way Corners Available
122.12”
122.12”OD 122.12”
OD122.12” ODOD 122.12”122.12”
OD OD 120”
120” 120”
120” 120” 120” 20.5”
20.5” 20.5”
20.5” 20.5” 20.5”
(310.19) (310.19)
(310.19) (310.19) (310.19)
(310.19) 122.12” (304.80)
(304.80) (304.80)
(304.80) (304.80)120”
(304.80) (52.07)
(52.07) (52.07)
(52.07) (52.07)(52.07)20.5”
122.12” OD OD 120” 20.5”
(310.19)
(310.19) (304.80)
(304.80) (52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
20.5”
20.5”
20.5”20.5”
20.5”
20.5”
20.5”20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
(52.07)
(52.07)
(52.07)
(52.07)
20.5”
20.5”
PLAN
PLAN PLAN
PLAN PLAN PLAN ELEVATION
ELEVATION ELEVATION ELEVATION
ELEVATION ELEVATION END
ENDVIEW VIEWEND END VIEW VIEW END VIEW END EndVIEW View
Plan Elevation
PLAN PLAN ELEVATION
ELEVATION END END VIEW
VIEW
PLAN VIEWS
PLAN VIEWS PLAN VIEWS
Connector
PLAN Connector
VIEWS PLAN PLAN
Orientation
Connector VIEWS
Specified
Orientation
VIEWSOrientation
Connector
Orientation Specified by
ConnectorConnector
by Customer
Specified
Specified
Customer Orientation
by
Orientation 5-Way
Customer
by Customer
5-Way &Specified
6-Way
Specified
& 6-Way
by 5-Way
Available
5-Way by
Customer Customer
&
Available6-Way Available
& 6-Way Available 5-Way & 6-Way
5-Way & 6-Way Available Available
Sleeve
SleeveVersion
Version Sleeve
Sleeve Version
Version Sleeve SleeveVersionVersion
PLANPLAN
VIEWS VIEWS Connector
Connector Orientation
Orientation Specified
Specified by Customer
by Customer 5-Way5-Way
& 6-Way& 6-Way Available
Available SleeveSleeve
Version Version
38”
38”(96.52)
(96.52)38”38” (96.52) 38” (96.52)
(96.52) 38” (96.52) 99.
39.42”
39.42”(100.13)
(100.13) 39.42”
Horiz.
39.42”
Horiz.&(100.13)
&Vert.
(100.13) Horiz.
Vert.Horiz.
39.42” &39.42”
Vert. 0(100.13)
& Vert.
(100.13) ””
0Horiz. &Horiz.
Vert.0”5&0”Vert. (2( 55.500”” ” 9. 9.5 9. 9.5
29.50”
29.50”(74.93) 29.50”
(74.93)
29.50” (74.93)29.50”38”
(74.93) 38”(96.52)
29.50”(96.52)
(74.93) 38”38”
(74.93) (96.52) 38” (96.52)
(96.52) 38” (96.52)
35.88” (91.13) 35.88” (91.13)35.88” 35.88” (91.13) 99.5.5 133) ) .5”9”. 3) 838.)3. .50( (250 0” ( 50 (2 0”
35.88” (91.13)
35.88” (91.13) (91.13) 38” (96.52)
38” (96.52) 9 ” 249”4.. 8. ”38).39 243) ”4.” 381.3”1 ( 82.341.1 ” 49.13 9.5
39.42”2
. 1
39.42”
.
4Horiz.
(100.13)
4 (100.13)1 1
3.3 4.2&
.Horiz. 1
) . 1
4)(Horiz.
2(Vert.
& 2Vert.311& .31) (2021.41)13.(3)123)11”(214”8.01.”3.1135)10) 3(8”2).1
”.3”81Vert. ”) 21 ”3) . )
28.56”
28.56”(72.54)
(72.54)28.56”
28.56” (72.54)28.56”
(72.54) 28.56”
35.88”
(72.54)
35.88”
29.50”29.50”
(72.54)
(91.13)
(91.13) (74.93)
35.88”
35.88”
(74.93) (91.13)35.88” 35.88”
(91.13) (91.13) 38” (96.52)
(91.13)
38” (96.52) 37.30”
37.30”(94.74)
(94.74) 37.30”
Horiz.
37.30”
Horiz.
35.88”35.88”
&(94.74)
Vert.
(94.74)
& Vert.
(91.13) Horiz.
Horiz.
37.30”
& 37.30”
& Vert.
Vert.
(94.74)( ( (94.74)
2 &8
Horiz.
8
Vert.
( 2 (
0
.1.1 0 1 1 8 0 (
.1.10 .11.1 .1 .190.5 9.)1 31)..11 . 0 0 .1 8 ( 50(2 0”
(91.13)
(2(211 (0)2)1(2 0) ) (.2113 4.1(2 10 ” 18”. 0)(2 .3214”.1 ” 4.13
3 ) .3 31 ) 3)
(24 (2 8. .108) (211.1.10 ” 1.10 )
(91.13)
35.88” (91.13)
(91.13)
(91.13)
35.88” (91.13)
38” (96.52)
38” (96.52)
(96.52)
38” (96.52)
38” (96.52)
Horiz.
Horiz.
Horiz.
20.5”
20.5” (52.67)
20.5”20.5”
0)
(71.57)
28.18” (71.57)
(71.57)
(71.57)
28.18” (71.57)
(71.57)
(21 (2 )
(73.96)
(73.96)
38”(73.96)
Horiz. &
20.5” (52.67)
20.5” (52.67)
28.18” (71.57)
(71.57)
(71.57)
(71.57)
29.12” (71.57)
28.18” (71.57)
(74.62)
28.18” (74.62)
(74.62)
29.12” (73.96)
(73.96)
29.12” (73.96)
29.38” (74.62)
29.38” (74.62)
29.38” (74.62)
35.88” (91.13)
(91.13)
38” (96.52)
38” (96.52)
28.18” (71.57)
29.12” (73.96)
29.38” (74.62)
Horiz.
(71.57)
(71.57)
(73.96)
(74.62)
35.88”
35.88”
35.88”
35.88”
(52.67)
(52.67)
& Vert.
& Vert.
& Vert.
38”
28.18”
28.18”
28.18”
29.12”
28.18”
28.18”
28.18”
28.18”
29.38”
29.38”
29.12”
29.12”
29.38”
Vert.
35.88”
(52.67)
& Vert.
28.18”
28.18”
29.12”
29.38”
Center
CenterPivot
Pivot Center
Center Pivot Center Center
Pivot Pivot Pivot
Horizontal Horizontal Horizontal
Horizontal Horizontal Horizontal
Horiz.
Horiz.Articulating
Horiz.
Articulating
Horiz. Block
Articulating
Articulating
Block Block
Horiz. Horiz. Articulating
Block
Articulating Variable
Block Block
Variable
Center Corner
Variable
Corner
Variable Corner
Corner Variable
Variable Corner
CornerHorizontal
2-Way
2-WayCorner
Corner2-Way
Block
2-Way
Block Corner
Corner Block3-Way
Block
2-Way 2-Way
Corner Corner
3-WayCorner
Block
Corner Block
3-Way
Block
3-Way
Block Corner
Corner Block
3-Way 4-Way
Block 3-Way
Corner Corner
4-WayCorner
Corner
Block 4-Way
Block
Block
4-Way
Block Corner
Corner Block 4-Way
Block
4-Way CornerCorner
Block Block Center Pivot Pivot Horizontal
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block CenterHoriz.
Pivot Horiz. Block
Articulating Horizontal Variable
Variable Corner
Horiz. Articulating Block Variable Corner
2-Way2-Way
CornerCorner
BlockBlock 3-Way3-Way Corner
Corner BlockBlock 4-Way4-Way
CornerCorner
BlockBlock Articulating Block Corner
24
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 920 9200 (4173) 0.06 9204 (4175) 0.09 4602 (2087) 0.08 3068 (1392) 0.07
20 (6.09) 450 9000 (4082) 0.45 5797 (2630) 0.46 4348 (1972) 0.59 2898 (1315) 0.54
30 (9.14) 252 7560 (3429) 1.29 3781 (1715) 1.04 2836 (1286) 1.32 1891 (858) 1.23
40 (12.19) 137 5480 (2486) 2.28 2748 (1246) 1.86 2061 (935) 2.34 1374 (623) 2.18
50 (15.24) 77 3850 (1746) 3.30 2109 (957) 2.94 1429 (648) 3.33 1025 (465) 3.33
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
(52.07)
(52.07)
(52.07)
20.5”
20.5”
20.5”
(76.20) (76.20)
(76.20)
(76.20)
(76.20)
(76.20)
(76.20)
20.5”
(76.20)
(52.07)
(52.07)
(76.20)
(52.07)
20.5”
30”
30”
30” (76.20)
(76.20)
20.5”
(76.20)
20.5”
30”
30”
30”
(76.20)
(76.20)
30”
(76.20)
(76.20)
30”
30”
30”
30”
30”
30”
30”
20.5”
30”
30”
(53.97) Horiz.
(17 75”
Vert. Vert.
6.7 14)
(52.07) Horiz.
Horiz.
.14
(76.20) Vert.
30” (76.20) Vert.
.
30” (76.20) Vert.
(52.07)
(76.20)
(53.97) (53.97)
(53.97)
(53.97)
21.25” 21.25”
21.25”
21.25”
(53.03) (53.03)
(53.03)
(53.03)
(53.03) (53.03)
(53.03)
(53.03)
20.88” 20.88”
20.88”
20.88”
20.88” 20.88”
20.88”
20.88”
(52.07)
21.25”
(53.03)
(53.03)
20.88”
20.88”
(53.97)
21.25”
(53.03)
(53.03)
(53.97)
20.88”
20.88”
21.25”
(53.97)
(53.03)
(53.03)
21.25”
20.88”
20.88”
(53.03)
(53.03)
20.88”
20.88”
20.5” (52.07)
30” (76.20)
20.5”
30”
20.5”
30”
20.5”
Center Pivot
Center Pivot Center Horizontal
PivotCenter
Horizontal
Pivot Horizontal Horizontal
2-Way Corner PivotCenter
CenterArticulating Pivot Horizontal Horizontal
2-WayBlock 3-Way Corner Block 4-Way
4-WayCorner Block Center Pivot Horiz. Horizontal Variable
Horiz. Articulating
Horiz. Block Horiz.
Block Articulating
Variable
Horiz. Block
Variable
Corner Center Pivot
Corner
Articulating Block Variable Corner
Variable Horizontal
Corner
2-Way Corner Block
Corner Block
2-Way 3-Way
CornerCorner
Block
3-Way
2-Way Block
Corner
Corner Block
Block 3-Way Corner
4-Way Corner
Block
4-Way
3-Way Block
Corner
Corner Block
Block Corner Block
4-Way Corner Block
Horiz. Articulating Block Variable Variable Corner
2-Way
2-Way Corner Corner Block 3-Way Corner
Block 3-Way Corner
Block 4-Way
Block 4-Way Corner Corner
Block Block Horiz. Articulating Block Articulating Corner
Horiz.
Block Articulating Block CornerVariable Corner
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block Center Pivot Horizontal
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block Horiz. Articulating Block Variable Corner
26
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 584 5840 (2649) 0.02 5840 (2649) 0.04 2920 (1325) 0.03 1947 (883) 0.03
20 (6.09) 287 5740 (2604) 0.18 3704 (1680) 0.19 2778 (1260) 0.24 1852 (840) 0.23
30 (9.14) 159 4770 (2164) 0.53 2387 (1083) 0.43 1790 (812) 0.54 1193 (541) 0.51
40 (12.21) 85 3400 (1542) 0.95 1703 (772) 0.78 1277 (579) 0.97 852 (386) 0.90
50 (15.24) 50 2500 (1134) 1.46 1273 (577) 1.23 955 (433) 1.51 637 (289) 1.42
60 (18.28) 32 1920 (871) 2.11 970 (440) 1.80 728 (330) 2.17 485 (220) 2.05
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
SLEEVE
Sleeve
122.12” OD OD 122.12” OD
122.12” 120” 120” 120” 20.5” 20.5” 20.5”
Plan Views – Connector
(310.18) Orientation
(310.18) (310.18) Specifi
122.12”ed
122.12” OD
(310.18) OD by Customer
(304.8)(304.8) (304.8)
120”
(304.8)120” (52.07)(52.07) (52.07)
20.5”
(52.07)20.5”
(310.18) (304.8) (52.07)
122.12” OD 122.12” OD 120” 120” 20.5” 20.5”
(310.18) (310.18) (304.8) (304.8) (52.07) (52.07)
(52.07)
(52.07)
(52.07)
20.5”
122.12” OD 120”
20.5”
20.5”
(52.07)
20.5”
20.5” (52.07)
(76.20)
(76.20)
(76.20)
(52.07)
(310.18) (304.8)
(76.20)
(52.07)
20.5”
30”
30”
30”
30” (76.20)
(76.20)30”
(52.07)
30”
20.5”
20.5”
(76.20)
PLAN PLAN
30”
PLAN
(52.07)
PLAN
20.5”
(76.20)
. 7 . 8 .
251” 4)
20.5” (52.07) Horiz.
39.42” (100.12) Horiz. (21 4) (21 ”244) 9.5 .74 .516.7 ( 56” 9.5 3)
35.88” (91.13)
35.88” (91.13)
20.5” (52.07)
30” (76.20) 20.5”
9.7 .77)
(96.52)
48.92” (124.25)37.30”
Vert. (94.74) Horiz.37.30” (94.74) Horiz.
29.38” (74.62)
28.18” (71.57)
(96.52)
38” (96.52)
29.12” (73.96)
28.18” (71.57)
29.38” (74.62)
28.18” (71.57)
29.38” (74.62)
28.18” (71.57)
28.18” (71.57)
29.12” (73.96)
28.18” (71.57)
29.50” (74.93) 28.56” (72.54) 28.56” (72.54) 35.88” (91.13) 35.88” (91.13) 9
20.5” (52.07) Horiz.
13
29.38” (74.62)
28.18” (71.57)
” )
29.12” (73.96)
28.18” (71.57)
35.88” (91.13)
35.88” (91.13) 6
30”20.5”
28.18” (71.57)
5”
(73.96)
(71.57)
9.7 .77)
20.5” (52.07) Horiz.
(91.13)
8.5
(76.20)
30” (76.20) Vert.
30” (76.20)
6 ”
29.12” 38”
4
38” (96.52)
38” (96.52)
28.18” (71.57)
29.38” (74.62)
28.18” (71.57)
28.18” 38”
29.12” (73.96)
28.18” (71.57)
(73.96)
(71.57)
(2 8.5 .74)(21.7 ”
4)
Vert. (52.07) Horiz.
(21
(52.07)
35.88”38”
(91.13)
Horiz. Vert.
(96.52)
29.38” (74.62)
28.18” (71.57)
29.12” (73.96)
28.18” (71.57)
Vert.Horiz.
29.12”
28.18”
CenterCenter
Pivot Pivot Center Pivot Horizontal
Horizontal Horizontal
Center Pivot Horizontal
35.88”
2-Way2-Way
CornerCorner
Block2-Way 3-Way3-Way
Block Corner Block CornerCorner
Block3-Way
Block Corner Block
4-Way Corner
4-Way Block4-Way
Corner BlockCorner Horiz. Horiz.
Corner Block Articulating Block
Articulating
Horiz.Block
Articulating Variable
BlockCenter CornerCorner
Variable
Pivot Variable Corner Horizontal
2-Way Corner Block 3-Way
CornerCorner
Block Block 4-Way Block Center Pivot Horiz. Horizontal Variable
38”
2-Way 3-Way Corner Block 4-Way Corner Block Horiz. Articulating Block Variable Corner
2-Way Corner Block 3-Way Corner Block Variable Corner
4-Way Corner Block Articulating
Center Pivot Horiz. Block
Articulating
Center Pivot Block Horizontal Corner Horizontal
2-Way Corner Block2-Way Corner Block
3-Way Corner Block3-Way Corner Block
4-Way Corner Block4-Way Corner Block Horiz. Articulating Block Variable Corner
Horiz. Articulating Block Variable Corner
Center Pivot Horizontal
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block Horiz. Articulating Block Variable Corner
28
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 3555 35550 (16125) 0.09 17780 (8065) 0.08 13330 (6046) 0.10 8888 (4032) 0.09
20 (6.09) 877 17540 (7956) 0.38 8775 (3980) 0.30 6581 (2985) 0.39 4388 (1990) 0.36
30 (9.14) 381 11430 (5185) 0.85 5725 (2597) 0.69 4294 (1948) 0.87 2863 (1299) 0.81
40 (12.19) 208 8320 (3774) 1.52 4163 (1888) 1.23 3122 (1416) 1.55 2081 (944) 1.45
50 (15.24) 127 6350 (2880) 2.36 3195 (1449) 1.95 2396 (1087) 2.42 1598 (725) 2.27
60 (18.29) 79 4710 (2136) 3.22 2356 (1069) 2.67 1767 (802) 3.28 1178 (534) 3.10
5/8” diameter Grade 8 Bolts with standard washers through 3/8” gusset plates
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
SLEEVE
Sleeve
123” OD 120”
PLAN (312.42) ELEVATION (304.80)
(60.96)
24”
(103.50)
40.75”
Plan Views – Connector Orientation Specifi ed Connector
PLAN VIEWS by Customer
Orientation Specified by Customer
Sleeve Version Caster Bar
123” OD 120”
PLAN (312.42) ELEVATION (304.80) 45.51” (115.59)
24” (60.96)
35” (88.90) 45.51” (115.59) 42” (106.68)
123” OD 123” OD 120” 120”
PLAN 123” OD
123” OD (312.42) (312.42) 33.5” (85.09) ELEVATION ELEVATION120”
42” (106.68) 120” (304.80) (304.80)
PLAN
(60.96)
45.51” (115.59)
36” (91.44)
34.51” (87.65)
(103.50) 40.75”
42” (106.68)
34.51” (87.65)
40.75”
33” (83.82)
33” (83.82)
(60.96)
(60.96)
24”
(60.96)
24”
(60.96)
24”
(103.50)
24”
40.75”
(103.50)
40.75”
(103.50)
(103.50)
40.75”
36” (91.44)
35” (88.90)
42” (106.68)
35” (88.90)
33” (83.82)
33” (83.82)
36” (91.44)
34.51” (87.65)
45.51” (115.59)
36” (91.44)
42” (106.68)
34.51” (87.65)
34.51” (87.65)
45.51” (115.59)
36” (91.44)
42” (106.68)
33” (83.82)
33” (83.82)
34.51” (87.65)
34.51” (87.65)
45.51” (115.59)
36” (91.44)
33” (83.82)
33” (83.82)
42” (106.68)
34.51” (87.65)
34.51” (87.65)
42” (106.68)
33” (83.82)
33” (83.82)
34.51” (87.65)
33” (83.82)
33” (83.82)
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block END VIEW
30
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 2068 20680 (9380) 0.02 20683 (9382) 0.03 10341 (4691) 0.03 6894 (3127) 0.03
20 (6.09) 1011 20220 (9172) 0.16 20220 (9172) 0.25 10111 (4586) 0.22 6741 (3058) 0.20
30 (9.14) 658 19740 (8954) 0.55 17077 (7746) 0.74 9880 (4482) 0.73 6587 (2988) 0.68
40 (12.21) 482 19280 (8745) 1.30 10264 (4656) 1.13 7698 (3492) 1.40 5132 (2328) 1.32
50 (15.24) 376 18800 (8528) 2.55 9877 (4480) 2.20 6020 (2731) 2.27 4459 (2023) 2.33
60 (18.28) 215 12900 (5851) 3.32 6458 (2929) 2.80 4844 (2197) 3.39 3229 (1465) 3.20
70 (21.33) 132 9240 (4191) 4.28 4649 (2109) 3.69 3487 (1582) 4.36 2324 (1054) 4.14
80 (24.38) 68 5440 (2468) 4.82 2733 (1240) 4.30 2050 (930) 4.89 1366 (620) 4.70
Spigots Only
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
STACKABLE
Stackable
120.23” OD 118.11”
(305.38) (300)
(62.59)
24.64”
(76.05)
29.94”
(34.82)
13.71”
ELEVATION
Plan Views – Connector Orientation
PLAN
Specified by Customer
120.23”
120.23”
120.23” OD OD
OD 118.11”
118.11”
118.11” Snap Hooks
PLAN VIEWS Connector Orientation Specified byCustomer
(305.38)
(305.38)
(305.38)
120.23” OD (300) (300)
(300)
118.11”
(305.38)
120.23” OD (300)
118.11” 46.91” (119.15)
30.66”
(305.38) 38.42” (97.58) (300)
46.91” (119.15) 45.09” (114.53) (77.88)
(62.59)
24.64”
45.09” (114.53)
(62.59)
(76.05)
(58 .18”
37.49” (95.23)
24.64”
29.94”
(14.45)
(76.05)
)
(34.82)
29.94”
5.69”
13.71”
.92
(34.82)
13.71”
(62.59)
24.64”
(76.05)
29.94”
25
(34.82)
13.71”
45.09” (114.53)
46.91” (119.15)
(62.59)
24.64”
(76.05)
29.94”
38.42” (97.59)
37.49” (95.23)
38.79” (98.53)
37.91” (96.28)
(34.82)
13.71”
ELEVATION
ELEVATION
ELEVATION
PLAN PLAN
PLAN ELEVATION
Plan
PLAN Elevation
ELEVATION End View
PLAN END VIEW
Snap Snap Hooks
Snap Hooks
Hooks
PLAN PLAN VIEWS
PLAN VIEWS
VIEWS Connector
Connector
Connector Orientation
Orientation
Orientation Specified
Specified
Specified byCustomer
byCustomer
byCustomer
Snap Hooks
PLAN VIEWS Connector Orientation Specified byCustomer
46.91” 46.91”
46.91”Corner (119.15)
(119.15)
(119.15) Snap Hooks
2-Way Corner Block
PLAN VIEWS Connector Orientation Specified byCustomer 3-Way Block 4-Way Corner
30.66”
30.66” 30.66”
Block
38.42”38.42”
38.42” (97.58)(97.58)
(97.58) 46.91”46.91”
46.91” (119.15)(119.15)
(119.15)
46.91” (119.15)
45.09” (114.53) (77.88)(77.88)
(77.88)
30.66”
45.09”
45.09” (114.53)
(114.53)
46.91” (119.15)
38.42” (97.58) 46.91” (119.15)
45.09” (114.53) (77.88)
30.66”
(58 8”
37.49” (95.23)
(14.45)
45.09”
45.09” (114.53)
(114.53) 45.09” (114.53)
)
25 (.5982) 18”
37.49”
37.49” (95.23)
(95.23)
5.69”
(14.45)
.92
38.42” (97.58)
(58 .18” .92)
5.69”
) 5.1
46.91”
45.09” (119.15)
(114.53) 45.09” (114.53) (77.88)
(58 .2158”
37.49” (95.23)
(14.45)
.
5.69”
45.09” (114.53)
(119.15)
.92 2
45.09” (114.53)
46.91” (119.15)
37.91” (96.28)
5.69”
25
38.42” (97.59)
37.49” (95.23)
38.79” (98.53)
37.91” (96.28)
(114.53)
46.91” (119.15)
38.42” (97.59)
(95.23)
38.79” (98.53)
(96.28)
(114.53)
(119.15)
(97.59)
(95.23)
(98.53)
(96.28)
45.09”46.91”
37.49”38.42”
37.91”38.79”
45.09”
37.49”
37.91”
END VIEW
46.91”
38.42”
38.79”
END
END VIEW
VIEW
END VIEW
END VIEW
2-Way Corner
2-Way Block
CornerCorner
Block Block 3-Way Corner Block
3-Way Corner
Block Block 4-Way Corner Block
2-Way
2-Way Corner Block 3-Way
3-Way Corner
Corner Block 4-Way4-Way
4-Way CornerCorner
Corner Block Block
Block
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block
32
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 1107 11070 (5021) 0.05 10206 (4629) 0.08 5451 (2472) 0.07 3634 (1648) 0.07
20 (6.09) 511 10220 (4636) 0.39 5033 (2283) 0.32 3775 (1712) 0.40 2517 (1142) 0.37
30 (9.14) 222 6660 (3021) 0.88 3278 (1487) 0.71 2458 (1115) 0.90 1639 (743) 0.84
40 (12.21) 120 4800 (2177) 1.56 2377 (1078) 1.28 1783 (809) 1.60 1189 (539) 1.50
50 (15.24) 73 3650 (1656) 2.43 1818 (825) 2.02 1364 (619) 2.50 909 (412) 2.35
60 (18.28) 48 2880 (1306) 3.51 1430 (649) 2.94 1072 (486) 3.60 715 (324) 3.39
Spigots Only
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
Stacked view
Side view
34
Span Load Load Max Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
8 (2.44) 1098 8784 (3984) 0.05 5600 (2540) 0.08 3000 (1361) 0.07 2950 (1338) 0.06 2200 (998) 0.06
16 (4.88) 516 8256 (3745) 0.40 3600 (1633) 0.34 2250 (1021) 0.44 2100 (953) 0.41 1260 (572) 0.43
24 (7.32) 197 4728 (2145) 0.95 2350 (1066) 0.78 1600 (726) 0.99 1300 (590) 0.92 950 (431) 0.96
32 (9.75) 116 3712 (1684) 1.69 2000 (907) 1.39 1180 (535) 1.75 960 (435) 1.63 820 (372) 1.71
40 (12.19) 83 3320 (1506) 2.65 1560 (708) 2.20 1140 (517) 2.66 790 (358) 2.56 680 (308) 2.66
Parts list
Product Description
Strength
Under
Pressure 37
) 2.0
(52.07)
(52.07)
(52.07)20.5”
(45.77)
(45.77)
(45.77)
20.5”20.5”
18.02”
20.5”
20.5”
18.02”
18.02”
(52 0.5”
)
)
.07
2
2
(52.07)
(52.07)
(52.07)
(45.77)
(45.77)
(45.77)
20.5”
18.02”
18.02”
18.02”
PLAN
PLAN PLAN SIDESIDE SIDE ELEVATION
ELEVATION
ELEVATION ENDEND VIEW END VIEW
VIEW
Plan Elevation End View
PLAN PLAN PLAN SIDE ELEVATION
SIDE ELEVATION
SIDE ELEVATION END VIEW END VIEW END VIEW
PLAN
PLAN
VIEWS
VIEWSPLAN VIEWS
Connector
Connector Connector
Orientation
Orientation Orientation
Specified
Specified bySpecified
Customerby Customer
by Customer
25” (63.50)
25” (63.50)
25” (63.50)
25” (63.50)
29.50” (74.93)
(74.93)
29.50” (74.93)
29.50”
25” (63.50)
25” (63.50)
25” (63.50)
25” (63.50)
25” (63.50)
25” (63.50)
29.50”
2-Way Corner2-Way
Block Corner
2-Way
Block
Corner
3-Way
Block
Corner3-Way
Block Corner
3-Way
Block
Corner4-Way
Block Corner4-Way
Block Corner
4-Way
Block
Corner Block
38
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 287 2870 (1302) 0.05 1569 (712) 0.05 1177 (534) 0.06 784 (356) 0.05
20 (6.09) 74 1480 (671) 0.22 747 (339) 0.18 560 (254) 0.23 373 (169) 0.22
30 (9.14) 30 900 (408) 0.50 456 (207) 0.42 342 (155) 0.52 228 (103) 0.49
5/8” diameter Grade 8 Bolts with standard washers through 3/8” gusset plates
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
(52 0.5”
)
122.12” OD 122.12” OD
122.12” OD 120” 120” 120”
.07
.
2
(52.07) (52.07)
(52.07)
(52.07)
(45.77)
20.5” 20.5”
20.5”
20.5” (52.07)
18.02” 18.02”
18.02”
18.02” (45.77)
(52 0.5”
)
)
.07
.07
2
2
(52.07)
(45.77)
20.5”
20.5”
18.02”
18.02”
PLAN
PLAN PLAN SIDE
SIDE
ELEVATION
ELEVATION
SIDE ELEVATION END
END
VIEW
VIEW
END VIEW
Plan
PLAN PLAN PLAN Elevation
SIDE ELEVATION
SIDE ELEVATION
SIDE ELEVATION End VIEW
END VIEW END VIEWEND View
PLAN
PLAN
VIEWS
VIEWS
PLAN
Connector
Connector
VIEWS Connector
Orientation
Orientation
Orientation
Specified
Specified
by
Specified
by
Customer
Customer
by Customer
38.00”
38.00”
(96.52)
(96.52)
38.00” (96.52)
PLAN VIEWS
29.50"
29.50" PLAN
Connector
(74.93)
(74.93)VIEWS
29.50" PLAN
Orientation
Connector
(74.93) VIEWS Connector
Specified
Orientation
by
Orientation
Specified
Customer
38.00”
38.00”
(96.52) Specified
by Customer
(96.52)
38.00” (96.52)by Customer 35.88”
35.88”
(91.13)
(91.13)
35.88” (91.13)
28.56"
28.56"
(72.54)
(72.54)
28.56" (72.54) 35.88”
35.88”
(91.13)
(91.13)
35.88” (91.13) 38.00” (96.52)
38.00” (96.52)
38.00” (96.52)
29.50" (74.93)
29.50" (74.93)
29.50" (74.93) 38.00” (96.52)
38.00” (96.52)
38.00” (96.52) 35.88” (91.13)
35.88” (91.13)
35.88” (91.13)
38.00” (96.52)
38.00” (96.52)
35.88” (91.13)
35.88” (91.13)
38.00” (96.52)
35.88” (91.13)
28.19” (71.60)
28.19” (71.60)
28.19” (71.60)
29.12” (73.96)
29.12” (73.96)
29.12” (73.96)
28.56" (72.54)
28.56" (72.54)
28.56" (72.54)
29.38” (74.62)
29.38” (74.62)
28.19” (71.60)
28.19” (71.60)
29.38” (74.62)
28.19” (71.60)
35.88” (91.13)
35.88” (91.13)
35.88” (91.13)
38.00” (96.52)
35.88” (91.13)
38.00” (96.52)
35.88” (91.13)
38.00” (96.52)
35.88” (91.13)
28.19” (71.60)
28.19” (71.60)
28.19” (71.60)
29.12” (73.96)
29.12” (73.96)
29.12” (73.96)
29.38” (74.62)
28.19” (71.60)
29.38” (74.62)
28.19” (71.60)
29.38” (74.62)
28.19” (71.60)
2-Way Corner
2-Way
BlockCorner
2-WayBlock
Corner Block 3-Way Corner
3-Way
BlockCorner
3-WayBlock
Corner Block 4-Way Corner
4-Way
BlockCorner
4-WayBlock
Corner Block
40
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 773 7730 (3506) 0.09 6229 (2825) 0.12 3867 (1754) 0.13 2578 (1169) 0.12
20 (6.09) 246 4920 (2232) 0.49 2468 (1119) 0.40 1851 (840) 0.51 1234 (560) 0.47
30 (9.14) 104 3120 (1415) 1.10 1574 (714) 0.91 1180 (535) 1.14 787 (357) 1.06
40 (12.19) 55 2200 (998) 1.97 1106 (502) 1.64 829 (376) 2.02 553 (251) 1.89
50 (15.24) 32 1600 (726) 3.07 807 (366) 2.60 606 (275) 3.15 404 (183) 2.97
Spigots Only
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
FOLDABLE
Foldable
Plan Views
121.86” OD
121.86” OD Shipping Shipping
Width Width
(309.52) (309.52) 5.79” 5.79”
121.86”121.86”
OD OD Shipping
Shipping
Width
(14.70) Width
(14.70)
(309.52)(309.52) 5.79” 5.79”
Shipping
Shipping Height
(14.70) (14.70)
(57.78)
(57.78)
22.75”
22.75”
(36.19)
(36.19)
14.25”
14.25”
Shipping
Shipping Height
(57.78)
(57.78)
22.75”
22.75”
(36.19)
(36.19)
Height
14.25”
14.25”
Height
PLAN PLAN
PLAN PLAN
17.25” 17.25”
120” 120”
(43.81) (43.81)
(304.8) (304.8)
17.25”
Snap 17.25”
Hooks
Snap Hooks
120” 120”
(43.81) (43.81)
)
6)
(35 4”(35 4”
.56(3 4”
(304.8) (304.8)
.56 .56
) 5.5
1
(35 4” 1
Snap Hooks
Snap Hooks
)
(45.77)
(45.77)
18.02”
18.02”
1
(45.77)
(45.77)
18.02”
18.02”
ELEVATION
ELEVATION END VIEW
END VIEW
ELEVATION
ELEVATION END VIEW
END VIEW
42
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 577 5770 (2617) 0.16 2889 (1310) 0.13 2167 (983) 0.17 1445 (655) 0.15
20 (6.09) 139 2780 (1261) 0.65 1394 (632) 0.53 1046 (474) 0.67 697 (316) 0.62
30 (9.14) 58 1740 (789) 1.46 874 (396) 1.20 655 (297) 1.49 437 (198) 1.40
Spigots Only
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
FOLDABLE
Foldable
Plan Views
Shipping
Shipping Height
(52.70)
20.75”
(52.70)
20.75”
(57.78)
(57.78)
22.75”
22.75”
(52.70)
(52.70)
20.75”
20.75”
Height
Height
Plan
PLAN PLAN
23.75” 23.75”
PLANPLAN (60.32) (60.32)
120” 120” 23.75”
23.75”
(304.8) (304.8) Snap (60.32) Snap Hooks
Hooks
(60.32)
120” 120”
(52 0.5”
(52 0(.52” 0.5”
(304.8)
(304.8) SnapSnap
Hooks
Hooks
)
2 7) 7)
.07
.0 .0
2
2 2
(52 0.5”
)
.07
(45.77)
18.02”
(45.77)
18.02”
(45.77)
(45.77)
18.02”
18.02”
44
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 653 6530 (2962) 0.08 4468 (2027) 0.09 3266 (1481) 0.11 2177 (987) 0.10
20 (6.09) 217 4340 (1969) 0.42 2178 (988) 0.34 1633 (741) 0.44 1089 (494) 0.41
30 (9.14) 92 2760 (1252) 0.95 1389 (630) 0.78 1042 (473) 0.98 695 (315) 0.92
40 (12.21) 48 1920 (871) 1.68 976 (443) 1.41 732 (332) 1.74 488 (221) 1.63
Spigots Only
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
Foldable
FOLDABLE
Plan Views
121.86” OD121.86” OD Shipping Width
Shipping Width
(309.52) (309.52) 5.79”
121.86”
121.86”
OD OD Shipping WidthWidth
Shipping 5.79”
(14.70) (14.70)
(309.52)
(309.52) 5.79”5.79”
(14.70)
(14.70)
Shipping
Shipping Height
(71.75)
28.25”
(71.75)
28.25”
(15.87)
Shipping
Shipping
6.25”6.25”
(15.87) Height
6.25”
(71.75)
(71.75)
28.25”
28.25”
(15.87)
(15.87)
Height
6.25”
Height
Plan
PLAN PLAN 29.50” 29.50”
(74.93) (74.93)
PLANPLAN 120” 120” 29.50”
29.50”
(304.8) Snap Hooks
(74.93) Snap Hooks
(74.93)
(304.8)
120” 120”
(304.8)
(304.8) Snap Snap
HooksHooks
)
(66 6(”66 6”
.04 .04
)
(66 6”
.04
2
) 2
26 )
(66 ”
.04
2
(57.86)
22.78”
(57.86)
22.78”
(57.86)
(57.86)
22.78”
22.78”
ELEVATION
ELEVATION END VIEW END VIEW
Elevation End View
ELEVATION
ELEVATION END VIEW
END VIEW
46
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 546 5460 (2477) 0.04 5470 (2481) 0.06 2735 (1241) 0.05 1823 (827) 0.05
20 (6.09) 269 5380 (2440) 0.31 3812 (1729) 0.35 2692 (1221) 0.42 1795 (814) 0.39
30 (9.14) 164 4920 (2232) 0.98 2471 (1121) 0.80 1853 (841) 1.01 1235 (560) 0.94
40 (12.21) 88 3520 (1597) 1.74 1779 (807) 1.43 1334 (605) 1.79 889 (403) 1.68
50 (15.24) 53 2650 (1202) 2.71 1346 (611) 2.27 1010 (458) 2.80 673 (305) 2.63
Spigots Only
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
Strength
Under
Pressure 49
FOLDABLE
Foldable
SLEEVE
Sleeve
(52.07)
20.5”
(304.8)
(52.07)
(52.07)
(52.07)
122.12” (310.18) OD
(52.07)
(52.07)
20.5”
(304.8)
20.5”
20.5”
20.5”
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
(52.07)
20.5”
20.5”
20.5”
20.5”
20.5”
20.5”
(52.07)
(52.07)
20.5”
(52.07)
Collapsed
20.5”
(52.07)
20.5”
Collapsed
Plan PLAN VIEWS Sleeve Version Elevation
PLAN VIEWS SleeveVIEWS
PLAN Version Sleeve Version Collapsed
Collapsed Collapsed
Collapsed
PLAN VIEWS
PLAN VIEWS PLAN
Sleeve VIEWS
Version
Sleeve VersionSleeve Version 38” (96.52) 39.42” (100.12) Collapsed
29.50” (74.93) Sleeve Version 38” (96.52)
38” (96.52) 38” (96.52) 39.42” (100.12) 39.42” (100.12) Hor. & Ver.
29.50” (74.93) PLAN VIEWS 35.88”
Hor. &(91.13)
Ver.
29.50”
PLAN VIEWS38” (96.52)
(74.93) 38” (96.52)
Sleeve Version 38” (96.52)
39.42” (100.12)
39.42” (100.12)
Hor. & Ver.
39.42” (100.12) ” 9 .
28.56”
35.88” (91.13)
38” (96.52)
35.88” (91.13)
35.88”
38” (96.52) (91.13) 37.30” ” (94.74) 0” 9.2 9.50 3)
” 9.24 8.3 (23 24”
29.50”
28.56” (74.93)
29.50” (74.93) 29.50” 38” (72.54)
(74.93) (96.52)
38” (96.52) 38” (96.52) Hor. &(94.74)
37.30” Ver.
Hor.(96.52) Hor.
& Ver.37.30” & Ver.
(94.74) 50 339.42”
9.Hor. ) 4
9.85.3.113) ”(293.41” ”(24.91 8.31 8.31(230.)4 (29”1 1” .46
(72.54) 28.56” (72.54) 35.88” (91.13) 35.88” (91.13) 35.88” (91.13) 35.88” (91.13)
35.88” (91.13) 38”
38”
(96.52) 39.42”.
” 1 & Ver.3” 1(100.12)
(100.12) ”
( 3 ( 1 . . )
Hor. & Ver. 4
Hor. & Ver. (.250 ) Hor. . ) 12 4 ” 6
0 8) ..24 )0) 2.124 ” . ( 6) 240) 1
28.56” (72.54) 28.56” (72.54)
28.56” (72.54) 29.50”
29.50” (74.93) 35.88” (91.13)
35.88”(74.93)
(91.13)
35.88” (91.13)
38” (96.52)
38” (96.52) 37.30” 35.88”
(94.74) (94.74) 37.30” (94.74)
37.30”(91.13) 9 Hor. .580 &
& Ver. .1) 0Ver. (82.”190.)5 .1(2
83 1.1” (12”3 .1”0 8(.231 23 ”
.13 9 4(.2.31113” ) (2.31.3
35.88” (91.13)
35.88”
Hor. &(91.13) 1 4( .3(32.1 4 .3 .4 (2 ) 0” 1” .46 9
9.2 (2 .24”
29.12” (73.96)
(71.57)
(74.62)
(71.57)
(91.13)
38” (96.52)
20.5” (52.67)
(71.57)
(71.57)
20.5”
38” (96.52)
20.5” (52.67)
)
(91.13)
35.88” (91.13)
(2
(74.62)
28.18” (71.57)
(96.52)
20.5” (52.67)
(73.96)
(71.57)
(73.96)
(71.57)
(74.62)
(71.57)
29.38” (74.62)
28.18” (71.57)
(96.52)
(96.52)
20.5”
20.5” (52.67)
. (2 0)
Hor. & Ver.
(21
Hor. & Ver.
35.88” (91.13)
38”28.18”
29.38”
28.18”
(52.67)
& Ver.
35.88”
35.88”
35.88” (91.13)
(73.96)
(71.57)
(74.62)
(71.57)
38” (96.52)
20.5” (52.67)
29.12”
28.18”
29.38”
28.18”
38”
28.18”
28.18”
29.12” (73.96)
28.18” (71.57)
(74.62)
(71.57)
38” (96.52)
38”
29.12”
28.18”
29.12”
28.18”
29.38”
28.18”
28.18”38”
29.12”
29.38”
28.18”
29.38”
28.18”
50
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 920 9200 (4173) 0.06 9204 (4175) 0.09 4602 (2087) 0.08 3068 (1392) 0.07
20 (6.09) 450 9000 (4082) 0.45 5797 (2630) 0.46 4348 (1972) 0.59 2898 (1315) 0.54
30 (9.14) 252 7560 (3429) 1.29 3781 (1715) 1.04 2836 (1286) 1.32 1891 (858) 1.23
40 (12.19) 137 5480 (2486) 2.28 2748 (1246) 1.86 2061 (935) 2.34 1374 (623) 2.18
50 (15.24) 77 3850 (1746) 3.30 2109 (957) 2.94 1429 (648) 3.33 1025 (465) 3.33
Spigots Only
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
FOLDABLE
Foldable
SLEEVE
Sleeve
(76.20)
(52.07)
(52.07)
(76.20)
(52.07)
20.5”
20.5” 20.5”
20.5”
30”
30” 30”
30” 30”
(76.20)
(52.07)
(76.20)
(76.20)
(52.07)
(52.07)
20.5”
20.5”
20.5”
30”
(76.20)
(52.07)
(76.20)
30”
(52.07)
20.5”
30”
(91.13)
28.56”28.56”
(72.54)(72.54) 35.88”35.88”
(91.13)(91.13)
(91.13)
37.30” 37.30”Hor.
(94.74) 4 8
38” (96.52)
38” (96.52)
29.12” (73.96)
28.18” (71.57)
(73.96)
(71.57)
28.18” (71.57)
(74.62)
(71.57)
(73.96)
(71.57)
(71.57)
20.5”30”
20.5” 20.5”
Ver. 46.80”
Ver. (118.87)
20.5”
46.80” (118.87)
46.80” (118.87) 1.1Ver. (2.11Ver. 0.1) 10 (2(12 (24 08). .10)8.231..10)”(21.1 1” )
35.88” (91.13)
30” (76.20)
)
30” 30”
(91.13)
35.88” (91.13)
46.80”46.80” (2(118.87)
(118.87) )
38” (96.52)
29.12” (73.96)
28.18” (71.57)
29.38” (74.62)
28.18” (71.57)
(21 0
(91.13)
(96.52)
(96.52)
29.12” (73.96)
28.18” (71.57)
(73.96)
(71.57)
(21 ) 0)
35.88” (91.13)
(71.57)
29.38” (74.62)
28.18” (71.57)
20.5”
38” (96.52)
(74.62)
(71.57)
(73.96)
(71.57)
35.88”35.88”
(71.57)
(76.20)
35.88”
(52.07)
(52.07)
30” (76.20)
29.12”29.12”
28.18”28.18”
38” 38”
28.18”
29.38”29.12”
28.18”28.18”
29.38”
28.18”
(76.20)
(76.20)
35.88”
(52.07)
38”
29.12”
28.18”
29.38”
28.18”
(52.07)
29.12”
28.18”
Ver. Ver.
29.38”
28.18”
Ver.Ver.
Hor.
Hor. Hor.
Hor.Hor.
Ver.
52
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
10 (3.05) 3555 35550 (16125) 0.09 17780 (8065) 0.08 13330 (6046) 0.10 8888 (4032) 0.09
20 (6.09) 877 17540 (7956) 0.38 8775 (3980) 0.30 6581 (2985) 0.39 4388 (1990) 0.36
30 (9.14) 381 11430 (5185) 0.85 5725 (2597) 0.69 4294 (1948) 0.87 2863 (1299) 0.81
40 (12.19) 208 8320 (3774) 1.52 4163 (1888) 1.23 3122 (1416) 1.55 2081 (944) 1.45
50 (15.24) 127 6350 (2880) 2.36 3195 (1449) 1.95 2396 (1087) 2.42 1598 (725) 2.27
60 (18.29) 79 4710 (2136) 3.22 2356 (1069) 2.67 1767 (802) 3.28 1178 (534) 3.10
Spigots Only
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
Strength
Under
Pressure 55
39.30" (99.82)
30" (76.20)
30" (76.20)
30" (76.20)
30" (76.20)
39.30"
30"
30"
39.30"
39.30" (99.82)
39.30" (99.82)
30"
30"
30" (76.20)
30" (76.20)
30" (76.20)
30" (76.20)
39.30" (99.82)
(76.20)
30" (76.20)
(76.20)
30" (76.20)
39.30" (99.82)
30" (76.20)
30" (76.20)
(76.20)
(76.20)
(99.82)
(99.82)
45.38" (115.26)
47.5" (120.65)
38.06" 38.06"
(96.67)(96.67) 38.06" (96.67)45.38" 45.38"
(115.26) Horiz.
45.38"& Vert.
(115.26) ( 2 (2821 74) 846.80" 5 44 " 2 " 6
1)(.2 ) 1. .95.7 )1) 21 .7") () 9 6 1 8
(24 .5 "
(115.26)45.38" (115.26) . 8") .13
37.69" (95.73)
37.69" (95.73)
38.63" (98.12)
38.63" (98.12)
Horiz. &Horiz.
Vert. & Vert. Horiz. & Vert. .74 7(118.87) 748 .7.47 26.47"4) (21.136"
38.63" (98.12)
37.69" (95.73)
38.63" (98.12)
(95.73)
( 1. (118.87) 4) .56.546)"
Horiz. & Vert.
30" (76.20)
)
(115.26)
(115.26)
(98.12)
(21 74)
45.38" (115.26)
)
(120.65)
(95.73)
47.5" (120.65)
47.5" (120.65)
Horiz.
30"
1
(95.73)
(98.12)
37.69" (95.73)
45.38" (115.26)
2
(98.12)
37.69" (95.73)
(98.12)
(95.73)
(
38.63" (98.12)
38.63" (98.12)
37.69" (95.73)
47.5" (120.65)
Horiz.
30"
38.63" (98.12)
37.69" (95.73)
45.38" (115.26)
37.69" (95.73)
(76.20)
(95.73)
(95.73)
(76.20)
37.69"
&&
47.5"
38.63"
38.63"
37.69"
45.38"
45.38"
37.69"
47.5"
38.63"
Vert.
38.63"
38.63"
37.69"
Vert.
37.69"
37.69"
38.63"
37.69"
56
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
8 (2.43) 2180 17440 (7911) 0.03 10910 (4949) 0.03 6350 (2880) 0.01 4610 (2091) 0.02
16 (4.87) 1080 17280 (7838) 0.20 7490 (3398) 0.14 4690 (2127) 0.03 3570 (1619) 0.12
24 (7.31) 570 13680 (6205) 0.53 5610 (2545) 0.36 3650 (1656) 0.09 2870 (1302) 0.33
32 (9.75) 340 10880 (4935) 1.02 4400 (1996) 0.69 2940 (1334) 0.19 2360 (1071) 0.66
40 (12.19) 210 8400 (3810) 1.59 3550 (1610) 1.13 2420 (1098) 0.36 1970 (894) 1.12
48 (14.63) 140 6720 (3048) 2.32 2910 (1320) 1.69 2010 (912) 0.60 1650 (748) 1.71
56 (17.06) 100 5600 (2540) 3.16 2400 (1089) 2.33 1680 (762) 0.95 1390 (631) 2.44
64 (19.50) 70 4480 (2032) 4.15 1990 (903) 3.19 1400 (635) 1.43 1170 (531) 3.30
Spigots Only
Note: Deflections reported in the above tables are maximum expected for full loadings (indoor only). All loads are based on
96” (2.44 m) sections. Load tables are reprinted from engineering reports developed by Geiger, Gossen, Hamilton, Campbell
Engineers, P.C. Structural Engineers.
97.986" (248.88)97.986"
OD (248.88) OD 96.125" (244.16)96.125" (244.16) 24" (60.96) 24" (60.96)
41.233" (104.73)
41.233" (104.73)
30" (76.20)
30" (76.20)
24" (60.96)
41.233" (104.73)
30" (76.20)
58 5"
47.5" (120.65)
47.5" (120.65)
39.25" (99.69) 47.5" (120.65) 45.38" (115.26) Horiz. & Vert. (24 .5"
37.69" (95.73)
9.7 .71)
38.63" (98.12)
37.69" (95.73)
38.63" (98.12)
38.63" (98.12)
37.69" (95.73)
8.
38.63" (98.12)
37.69" (95.73)
.13
Horiz. & Vert.
30" (76.20)
46.80" (118.87)
(24 6" (21 56" )
38.06" (96.67) 45.38" (115.26) Horiz. & Vert. 8.5 .74) .74
( 2 1 )
45.38" (115.26)
47.5" (120.65)
37.69" (95.73)
38.63" (98.12)
38.63" (98.12)
37.69" (95.73)
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
8 (2.44) 920 7360 (3338) 0.01 7363 (3340) 0.02 3681 (1670) 0.02 2454 (1113) 0.02
16 (4.88) 450 7200 (3266) 0.10 5011 (2273) 0.11 3437 (1559) 0.13 2398 (1087) 0.12
24 (7.32) 293 7032 (3190) 0.33 3349 (1519) 0.26 2421 (1098) 0.31 1929 (875) 0.34
32 (9.75) 169 5408 (2453) 0.63 2340 (1061) 0.46 1788 (811) 0.57 1384 (728) 0.61
40 (12.20) 94 3760 (1706) 0.93 1632 (740) 0.70 1343 (609) 0.91 1024 (465) 0.96
48 (14.60) 53 2544 (1154) 1.24 1089 (494) 0.96 1002 (455) 1.31 761 (346) 1.36
Spigots Only
Note: Deflections reported in the above tables are maximum expected for full loadings (indoor only). All loads are based
on 96” (2.44 m) sections. Load tables are reprinted from engineering reports developed by Theta Consulting and apply
to truss fabricated after April 2009.
Plan
60
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
8 (2.44) 920 7360 (3345) 0.05 7135 (3236) 0.09 3680 (1669) 0.08 2453 (1112) 0.07
16 (4.88) 431 6896 (3134) 0.43 3450 (1564) 0.35 2587 (1173) 0,44 1725 (782) 0.41
24 (7.32) 181 4344 (1974) 0.97 2169 (983) 0.80 1626 (737) 1 1084 (491) 0.93
32 (9.75) 93 2976 (1352) 1.75 1489 (675) 1.48 1117 (506) 1.79 744 (337) 1.69
40 (12.20) 52 2080 (945) 2.77 1049 (475) 2.4 713 (323) 2.66 516 (243) 2.67
48 (14.60) 27 1296 (589) 3.85 563 (255) 3.2 327 (148) 3.19 237 (107) 3.2
Spigots Only
Nemesis 14"x24"
Connections are steel spigots & 3/4” clevis pins
(236.22)
(46.99) (79.37)
(46.99)
18.5"
18.5" 31.25"
(66.04)
(66.04)
26"
(79.37)
31.25"
26"
(79.37)
31.25"
(46.99)
(46.99)
(46.99)
(46.99)
(46.99)
18.5"
18.5"
18.5"
18.5"
18.5"
(66.04)
(66.04)
(66.04)
(46.99)
18.5"
26"
26"
26"
(79.37)
(79.37)
(66.04)
31.25"
31.25"
26"
(79.37)
31.25"
PLAN PLAN
ELEVATION ELEVATION END VIEW END VIEW
PLAN PLAN End View
Plan
PLAN PLAN VIEWS PLAN VIEWS Elevation
ELEVATIONELEVATION ELEVATION END VIEW END VIEW END VIEW ELEVATIONELEV
Horiz. Vert. Horiz. Vert. ELEVATION END VIEW
VIEWS 19.25"PLAN VIEWSPLAN
PLAN VIEWS 28.17" 35.67" 28.17" 35.67" .75" 6.7
" 5 619.25"
. 7
19.25" 19.25"VIEWS 19.25" 19.25"
) ( 5
1 ) " 5
(17(48.89)
Horiz. Vert. (71.55) (90.60) (71.55) (90.60)6 7.14 6.7 7 .
4 1 .14
" (48.89) (48.89) (48.89) (48.89) (48.89)
(1 .1 4) Horiz. Vert. Horiz. Vert.
28.17" 6. 6."7 19.25" Vert.
Horiz. 19.25"
6.7 19.25"
19.25" 19.25" (17
19.25"
19.25" 19.25" ) 19.25" 6. 19.25" 19.25"
5" 35.67".75" (17 75" 28.17" 35.67" 6.7
(46.99) (66.04)
5 5 5" 28.17"
19.25" 35.67" 5" 5" (17 75"
Horiz. Vert.
(46.99) (66.04)
(48.89) 19.25"
18.5" 26"
6.7 14(90.60) 6(.177.114)" 28.17" (1(48.89) 6.7 19.25" 6.7 14) (17. 5"
Horiz. Vert.
(48.89) .
(17 (17 (17 4) (71.55) (90.60) 4) (48.89) . 14
(47.95)
(48.89c)
(48.89) (17
18.88"
19.25"
)
(47.95)
(17
(47.95)
)
18.88"
18.88"
19.25"
.14 )
(47.95) 18.88"
18.88"
.
(17 )
(46.99) (66.04)
(46.99) (66.04)
(46.99) (66.04)
Horiz. Vert.
Horiz. Vert.
(46.99) (66.04)
18.5" 26"
18.5" 26"
Horiz. Vert.
18.5" 26"
Horiz. Vert.
18.5" 26"
(46.99) (66.04)
Horiz. Vert.
18.5" 26"
(48.89c)
(48.89c)
(48.89c)
(47.95)
(47.95)
26"
18.88"
18.88"
18.88"
19.25"
19.25"
19.25"
(47.95)
(47.95)
(47.95)
18.88"
18.88"
18.88"
(47.95)
18.88"
(47.95)
18.88"
(48.89c)
(47.95)
19.25"
(47.95)
18.88"
62
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
7'-9" (2.35) 1136 8804 (3993) 0.02 8251 (3743) 0.03 4403 (1997) 0.03 2936 (1332) 0.03
15'-6" (4.72) 526 8153 (3698) 0.16 4077 (1849) 0.13 3058 (1387) 0.17 2038 (924) 0.16
23'-3" (7.04) 229 5324 (2415) 0.37 2664 (1208) 0.30 1998 (906) 0.38 1332 (604) 0.35
31'-0" (9.44) 125 3875 (1758) 0.65 1941 (880) 0.53 1456 (660) 0.67 970 (604) 0.62
38'-9" (11.80) 77 2983 (1358) 1.02 1494 (678) 0.83 1120 (508) 1.04 747 (339) 0.97
46'-6" (14.17) 50 2325 (1055) 1.44 1185 (538) 1.21 889 (403) 1.50 593 (269) 1.41
54'-3" (16.52) 35 1898 (861) 1.99 956 (434) 1.67 717 (325) 2.03 478 (217) 1.92
5/8” diameter Grade 8 Bolts with standard washers through 3/8” gusset plates
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10’ (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
(66.04)31.25"
(244.17)
(46.99) 18.5"
(46.99)
(46.99)
98.25" (249.55) OD
18.5"
(66.04) (79.37)
(66.04)
(66.04)
18.5"
18.5"
18.5"
26"
(46.99)
(66.04)
26" 31.25"
26"31.25"
26"
18.5"
(79.37)
31.25"
(46.99)
(66.04)
(79.37) 31.25"
(79.37)
(79.37)
31.25"
31.25"
31.25"
26"
18.5"
(46.99)
(66.04)
18.5"
26"
(79.37)
26"
(79.37)
(46.99)
(66.04)
26"
(79.37)
(46.99) (66.04)
(46.99) (66.04)
35.30" 42.80(100.71)
18.5"
(66.52) (86.05)
Horiz. Vert.
Horiz. Vert.
Horiz. Vert.
" ( 8.(100.71)
18.5" Horiz.
18.5"
18.5"
(66.52) 1 31 1
Horiz.
33.88"
18.5"
Horiz. Vert.
35.30" 42.80
(91.44)
33.88"
18.5"
(46.99) (66.04)
(86.05)
(86.05)
(86.05)
(91.44)
(91.44)
(91.44)
(86.05) 33.88"
33.88"
33.88"
Horiz. Vert.
(86.05)
18.5"
(66.52) 0)
(68.88)
(67.46)
36"
(66.52)
(21
(69.85)
27.12"
26.56"
26.19"
27.50"
(86.05)
(91.44)
(68.88)
(68.88)
(68.88)
(67.46)
(67.46)
(67.46)
33.88"
36"
36"
36"
(66.52)
(66.52)
(66.52)
(89.66) (100.71)
(69.85)
(69.85)
(69.85)
27.12"
27.12"
27.12"
26.56"
26.56"
26.56"
26.19"
26.19"
26.19"
(69.85) 27.50"
(67.46) 27.50"
27.50"
(86.05)
(91.44)
33.88"
(46.99) (66.04)
(68.88)
(67.46)
36"
(66.52)
(69.85)
27.12"
(66.52)26.56"
26.19"
27.50"
(86.05)
18.5"
(91.44)
33.88"
26"
(68.88)
(67.46)
36"
(66.52)
(69.85)
27.12"
26.56"
26.19"
27.50"
26"
26"
26"
(68.88)
(67.46)
36"
(66.52)
(69.85)
27.12"
26.56"
26.19"
27.50"
(66.04)
26"
(91.44)
33.88"
26"
(68.88)
36"
26"
27.12"
26.56"
26.19"
27.50"
CenterCenter Center
CenterPivot
Pivot Pivot Pivot Horizontal Horizontal
Horizontal
Horizontal
Vert.
26"
64
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
8 (2.43) 1171 9368 (4249) 0.04 9372 (4251) 0.06 4686 (2126) 0.05 3124 (1417) 0.05
16 (4.87) 573 9168 (4159) 0.29 9175 (4162) 0.46 4587 (2081) 0.40 3058 (1387) 0.37
24 (7.31) 374 8976 (4072) 0.98 7682 (3485) 1.33 4489 (2036) 1.32 2993 (1358) 1.23
32 (9.75) 254 8128 (3687) 2.13 4584 (2079) 1.93 2990 (1356) 2.13 2145 (973) 2.13
40 (12.19) 124 4960 (2250) 2.67 3111 (1411) 2.67 1826 (828) 2.67 1309 (594) 2.67
48 (14.63) 66 3168 (1437) 3.20 2005 (909) 3.20 1176 (533) 3.20 844 (383) 3.20
56 (17.06) 37 2072 (940) 3.73 1313 (596) 3.73 771 (350) 3.73 553 (251) 3.73
Spigots Only
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
(76.20)
(76.20)
(76.20)
(76.20)
(66.04)
(66.04)
(66.04)
(66.04)
30"
30"
30" 30"
30"
(66.04)
(76.20)
30"
26"
26"
26" 26"
26"31.25"
(79.37)
(79.37)
(66.04)
(79.37)
(79.37)
31.25"
26"
31.25"
31.25"
31.25"
(76.20)
30"
(79.37)
31.25"
(66.04)
26"
(79.37)
(79.37)
31.25"
(76.20) (66.04)
(76.20)
(76.20) (66.04)
Horiz. Vert.
Horiz.
Horiz.
Horiz. Vert.
(76.20)
Horiz.
30"
30"
30" 30" 26" 26"
30"
(76.20) (66.04)
30" Vert.
Horiz. Vert.
(76.20)
30"
(77.16)
(78.10)
(78.10)
(77.16)
(77.16)
(77.16)
(78.10)
(78.10)
(78.10)
30.38"
30.75"
(78.10)
(78.10)
(78.10)
30.75"
30.38"
30.38"
30.38"
30.75"
30.75"
30.75"
Horiz.Vert.Vert.
30.75"
30.75"
30.75"
(77.16)
(78.10)
(78.10)
30.38"
30.75"
30.75"
(77.16)
(78.10)
(78.10)
30.38"
30.75"
30.75"
(77.16)
(78.10)
(78.10)
30.38"
30.75"
(66.04)
30.75"
(66.04)
26"
26"
26"
Vert.
26"
(66.04)
26"
Center Pivot
Center Pivot Center
Center Pivot Pivot
Center PivotHorizontal Horizontal
Horizontal Horizontal Horizontal
4-Way Corner Block Center Pivot Horizontal
2-Way Corner
2-WayBlock 3-Way
BlockCorner Block 4-Way Corner Block Variable Variable Corner
4-Way Corner Block Center Pivot
2-Way Corner Block
Corner
2-Way 2-Way
Block
Corner Corner
Block
2-Way 3-WayBlock
Corner
Corner3-Way Block
Corner
3-Way 3-Way
Block
Corner 4-Way
Block
3-Way Corner
Corner 4-Way
Block
Corner Block
Corner
Block 4-Way
Block
Corner Block
Horiz.
4-Way Articulating
Horiz.
Center
Corner Articulating
Pivot
Block Block Horiz.
Horiz. Articulating
BlockHoriz. Block Horiz.
Articulating Block
Variable
Articulating BlockVariable
Corner Corner
Horizontal Corner Horizontal
Variable Corner Variable
2-Way Corner Block 3-Way Corner Block Horiz. Articulating Block Variable Corner
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block Horiz. Articulating Block Articulating BlockVariable Corner Corner
66
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
7' - 9" (2.35) 1135 8796 (3990) 0.02 8248 (3741) 0.03 4400 (1996) 0.03 2933 (1330) 0.03
15' - 6" (4.72) 525 8137 (3691) 0.16 4070 (1846) 0.13 3052 (1384) 0.17 2035 (923) 0.16
23' - 3" (7.04) 228 5301 (2405) 0.37 2653 (1203) 0.30 1990 (903) 0.38 1327 (602) 0.35
31' - 0" (9.44) 124 3844 (1744) 0.65 1927 (874) 0.53 1445 (655) 0.67 963 (437) 0.62
38' - 9" (11.80) 76 2945 (1336) 1.02 1477 (670) 0.84 1107 (502) 1.04 738 (335) 0.97
46' - 6" (14.17) 50 2325 (1055) 1.47 1164 (528) 1.22 873 (396) 1.50 582 (264) 1.41
54' - 3" (16.52) 34 1844 (836) 1.98 931 (422) 1.68 698 (317) 2.03 466 (211) 1.92
5/8” diameter Grade 8 Bolts with standard washers through 3/8” gusset plates
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
SLEEVE
Sleeve
(66.04)
(76.20)30"
(76.20)
(76.20)
(79.37)
(79.37)
(79.37)
31.25"
31.25"
31.25"
(66.04)
26"
26"
26"26"
(76.20)
30"
30"
30"30"
(66.04)
(79.37)
31.25"
(66.04)
(76.20)
26"
(79.37)
(76.20)
31.25"
(79.37)
30"
31.25"
26"
(66.04)
(66.04)
30"
(76.20)
(76.20)
(79.37)
(79.37)
31.25"
31.25"
26"
26"
30"
PLAN
PLAN PLAN ELEVATION
ELEVATION ELEVATION
ELEVATION
PLAN PLAN PLAN ELEVATION ELEVATION
PLAN PLAN ELEVATION ELEVATION END END VIEWVIEW END VIEW
Plan Elevation EndEND View END VIEW
END VIEW VIEW
PLAN
PLAN Connector
Connector
PLAN
Orientation
Orientation
Connector
Specified
Specified
Orientation
byby
Customer
Customer
Specified bySleeve
Sleeve
Customer
Version
VersionSleeve Version END VIEW END VIEW
PLAN
PLANOrientation Connector
Connector Orientation
Orientation Specified by
Specified bySleeve Customer
Customer Sleeve Version
PLAN Connector Specified by Customer VersionSleeve Version
47.12"
47.12" 47.12" Horiz.
Horiz. Vert.Vert.Horiz. Vert.
PLAN Connector Orientation
PLAN Specified
ConnectorbyOrientation
Customer Specified
Sleeve Version
by Customer Sleeve Version
39.25"
39.25" 39.25" 47.12"
47.12" 47.12" (119.68)
(119.68) (119.68)
47.12" 48.54"47.12"
47.12"
48.54" 44.92"
44.92"
48.54"
Horiz. 44.92"
Vert. Horiz. Horiz. Vert. Vert.
(99.69)
(99.69) (99.69) 39.25"39.25"
(119.68)
(119.68) (119.68) 47.12"47.12"
47.12" 47.12"
Horiz.
(123.29) (119.68)
(119.68)
(123.29) Vert.
(114.09)
(114.09)
(123.29) Horiz. 48.54"
(114.09) Vert.48.54"44.92"44.92"
39.25" 47.12" 45.38"
45.38" (119.68)
45.38" 48.54" 44.92" " " " 9. 9. 9.
39.25" 39.25" (99.69)(99.69)
47.12" (119.68)
47.12"(119.68)(119.68) (119.68)
48.54" 45.38"
44.92"(123.29)48.54" 3 (123.29)
3
44.92" (114.09)
.13 ) (2 (2252" 5"" (293 25" 9.2
(99.69) (119.68) (115.26)
(115.26) (115.26)
45.38" 45.38" Horiz. (114.09) 9.19..119.1) 9) (114.09)
(123.29)
" "9 33".19 8.38.31" .1933" .43)9.4.1938.93)
9.
38.06"
38.06" 38.06" 45.38"
45.38" 45.38" Horiz.
Horiz. Vert.
Vert.
(115.26) Vert. .2.4 ( 25 (23 5"
(99.69)
(96.67)
(96.67)
(99.69) (119.68)
(96.67)
38.06" 38.06"38.06"
(115.26)
(115.26)
(119.68)45.38"45.38"
(115.26)
45.38"
45.38" (123.29)
(115.26)45.38" (115.26)
46.80"
(114.09)
46.80" 42.80"
42.80"
(123.29) 2(114.09)
46.80"
Horiz. 42.80"
Vert. (3 "3(23 Horiz.
Horiz. 8 .Vert. ) 19)(21(2318"1. " 19"( 0) ..2159 )(32).11 1"" (213".4 59"8)( 9.258.323.4 " .49)
381.3109) .0(12Vert.
(96.67) (115.26)
(115.26) (115.26) 1 9) 46.80"
9.46.80" 1.11.1(242.80" " 8 3
3. 89.1.1.013.219110).1(22) 33.4 ""((2 8..3.31110 0)88. .10(9)2) .2331."4(21" 1" 9)
38.06" 45.38"
(96.67) 38.06" (96.67) (115.26)45.38"(115.26) Horiz.
(118.87) Vert.
(118.87)(108.71)(118.87)Horiz.
(108.71) (108.71) .1 Vert. 3(42.80"
46.80" 42.80"
23 42.80" (118.87)12"(2) (108.71) . 8.( ) )0 9 2
(21 (2331"21.1 8.31) 0)1.(1201.1(21(2311"
") . 1.1 9) .10
(96.67) (96.67) (115.26) (115.26) 46.80" 42.80"(118.87)46.80" ((118.87)
(108.71) 8.(108.71)
.10 .1
0) )
.10( ) .10
(118.87) (108.71) (118.87) (108.71) (21 ) (21 )
(76.20)30"
(76.20)
(76.20)
Horiz.
Horiz. Vert.
Horiz.
(76.20) (66.04)
(119.68)
(119.68)
(115.26)
(115.26)
(119.68)
(115.26)
30" Horiz.
30"
30"30" 26"26"
Horiz. Vert.
(76.20) (66.04)
47.12"
47.12"
45.38"
45.38"
47.12"
45.38"
(76.20)
(98.12)
(98.12)
(95.73)
(95.73)
(98.12)
(95.73)
(119.68)
(115.26)
Horiz. Vert.
30"
38.63"
38.63"
37.69"
37.69"
38.63"
37.69"
(98.12)
(98.12)
(95.73)
(95.73)
(98.12)
(95.73)
Horiz.
38.63"
38.63"
37.69"
37.69"
38.63"
37.69"
47.12"
45.38"
(119.68)
(115.26)
30"
(119.68)
(115.26)
(76.20) (66.04)
(76.20)
(98.12)
(95.73)
38.63"
37.69"
47.12"
45.38"
(98.12)
(95.73)
38.63"
37.69"
47.12"
45.38"
Horiz. Vert.
(98.12)
(95.73)
38.63"
37.69"
(98.12)
(95.73)
(98.12)
(95.73)
38.63"
37.69"
38.63"
37.69"
(119.68)
(115.26)
(119.68)
(115.26)
(98.12)
(95.73)
30"
38.63"
37.69"
47.12"
45.38"
47.12"
45.38"
(66.04)26"
(66.04)
(66.04)
(98.12)
(95.73)
(98.12)
(95.73)
38.63"
37.69"
38.63"
37.69"
(98.12)
(95.73)
(98.12)
(95.73)
38.63"
37.69"
38.63"
37.69"
Vert.
Vert.
26" Vert.
26"
(66.04)
26"
Vert.
26"
(66.04)
26"
Center
CenterPivot
Pivot Center Pivot Horizontal
Horizontal Horizontal
Center Pivot Center Pivot Horizontal
2-Way Corner
2-Way
2-Way Block
Corner
Corner Block Corner Block 3-Way
Block
2-Way 3-Way
3-WayCorner
Corner
Corner Block
Block
3-Way
Block Corner Block 4-Way
4-Way
Corner4-Way
Corner Block Corner
Block
4-Way Block
Corner Horiz.
Horiz.
Block Articulating
Articulating
Horiz.
Block
Block Center
Center Pivot
Articulating Block Pivot Horiz.
Variable
Variable
Corner
Corner Corner Horizontal
Horizontal
Variable Horizontal Variable
Center Pivot Block Center PivotArticulating
Horiz. Horizontal Horizontal Variable
CornerCorner
2-Way Corner 2-Way
2-Way Corner Block
Block Corner Block 3-Way Corner 3-Way
3-Way Corner Block
Block Corner Block 4-Way Corner 4-Way
4-Way Corner
Block Corner Block Articulating
Horiz.
Horiz. Articulating Articulating
Block Block Block Variable Corner
Block Variable
Corner
2-Way Corner Block 3-Way Corner Block
2-Way Corner Block 3-Way Corner4-Way
BlockCorner Block 4-Way Horiz.
CornerArticulating
Block Variable Corner
BlockHoriz. Articulating Block Variable Corner
68
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
8 (2.43) 1169 9352 (4242) 0.02 9353 (4243) 0.03 4676 (2121) 0.02 3118 (1414) 0.02
16 (4.87) 571 9136 (4144) 0.14 9136 (4144) 0.22 4568 (2072) 0.19 3045 (1381) 0.17
24 (7.31) 371 8904 (4039) 0.46 7668 (3478) 0.63 4460 (2023) 0.62 2973 (1349) 0.58
32 (9.75) 271 8672 (3934) 1.08 4565 (2071) 0.92 3424 (1553) 1.16 2282 (1035) 1.08
40 (12.19) 185 7400 (3357) 1.84 4427 (2008) 1.76 2674 (1213) 1.81 1981 (899) 1.87
48 (14.63) 119 5712 (2591) 2.54 2863 (1299) 2.09 2147 (974) 2.60 1431 (649) 2.43
56 (17.06) 86 4816 (2185) 3.54 2755 (1250) 3.28 1771 (803) 3.54 1271 (577) 3.55
Spigots Only
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
SLEEVE
Sleeve
(76.20)
(76.20)
(76.20)
(76.20)
(76.20)
30"(89.54)
(76.20)
(76.20)
(76.20)
30"
30"
30"
(76.20)
(76.20)
(89.54)
30"
35.25"
(89.54)
(89.54)
30" 30"
(89.54)
35.25"
35.25"
35.25"
30"
30"
30"
(76.20)
(76.20)
35.25"
30"
30"
(76.20)
(89.54)
(89.54)
35.25"
35.25"
30"
30"
(76.20)
30"
(89.54)
35.25"
(115.26)
45.38" (115.26)
(115.26)
(120.65)
38.875" (98.74)
(98.74)
38.875" (98.74)
(95.73)
(98.74)
47.5" (120.65)
47.5" (120.65)
47.5" (120.65)
45.38" (115.26)
37.69" (95.73)
37.69" (95.73)
38.875" (98.74)
(98.74)
37.69" (95.73)
(95.73)
38.875" (98.74)
(98.74)
37.69" (95.73)
37.69" (95.73)
47.5" (120.65)
37.69" (95.73)
(95.73)
(98.74)
Horiz.
45.38" (115.26)
45.38" (115.26)
37.69" (95.73)
38.875" (98.74)
47.5" (120.65)
47.5" (120.65)
30" (76.20)
37.69" (95.73)
38.875" (98.74)
45.38"(98.74)
30" (76.20)
30" (76.20)
30" (76.20)
(95.73)
37.69" (95.73)
30" (76.20)
Horiz. & Vert.
(120.65)
30"
(95.73)
(98.74)
(95.73)
Horiz.
38.875"
38.875"
30" (76.20)
37.69"
38.875"
&(76.20)
45.38"
38.875"
37.69"
38.875"
45.38"
47.5"
37.69"
38.875"
Vert.
37.69"
38.875"
37.69"
38.875"
37.69"
38.875"
& Vert.
45.38"
37.69"
47.5"
Horizontal
Horizontal Horizontal Center Pivot
HorizontalHorizontal Center PivotCenter
Center
PivotPivot
Horizontal Center Pivot
Horizontal
2-Way Corner Variable Corner Center Pivot Block Center Pivot
2-Way 2-WayBlock
Corner Block 3-Way Corner
3-Way Block
Corner Block 4-Way Corner Block
4-Way Variable
Block Corner Variable Horiz.Articulating
Corner
Block Corner Block 3-Way Corner Block Horizontal Variable Center Pivot Horiz.
Corner Block
2-Way
2-Way Corner
Corner Block
Block
2-Way 3-Way
Corner Corner
Block Block
3-Way
3-Way Corner
Corner Block
Block
3-Way 4-Way
Corner Corner
Block Block
4-Way
4-Way Corner
Corner Block
Block
4-Way Corner
Horizontal Variable Corner
VariableHoriz.Articulating
Corner
Center Pivot Horiz.Articulating
Block Horiz.Articulating
Horiz.Articulating BlockBlock Block
2-Way Corner Block 3-Way Corner Block 4-Way Corner2-Way Corner
Block Variable Corner 4-Way
Horiz.Articulating Corner Block
Block Variable Corner Horiz.Articulating Block
2-Way Corner Block 3-Way Corner Block 4-Way Corner Block Variable Corner Corner
Horiz.Articulating Block Articulating Block
70
Span Load Load Max Load Max Load Max Load Max
feet (meters) lbs/ft lbs (kgs) Defl in. lbs (kgs) Defl. in. lbs (kgs) Defl. in. lbs (kgs) Defl. in.
8 (2.43) 2849 22821 (10352) 0.03 22220 (10079) 0.05 11410 (5176) 0.04 7608 (3451) 0.04
16 (4.87) 1374 22012 (9985) 0.24 11010 (4994) 0.20 8260 (3747) 0.25 5507 (2498) 0.23
24 (7.31) 602 14466 (6562) 0.55 7236 (3282) 0.44 5427 (2462) 0.56 3618 (1641) 0.52
32 (9.75) 331 10605 (4810) 0.97 5315 (2411) 0.79 3986 (1808) 0.99 2657 (1205) 0.93
40 (12.19) 206 8250 (3742) 1.52 4136 (1876) 1.24 3102 (1407) 1.55 2068 (938) 1.45
48 (14.63) 138 6632 (3008) 2.18 3329 (1510) 1.80 2497 (1133) 2.23 1665 (755) 2.09
56 (17.06) 97 5439 (2467) 2.97 2735 (1241) 2.47 2051 (930) 3.04 1367 (620) 2.85
64 (19.50) 70 4485 (2034) 3.85 2273 (1031) 3.26 170 (773) 3.97 1136 (515) 3.74
Spigots Only
Note: Deflections reported in the tables on the left are the maximum expected for full loadings (indoor only). All loads
are based on 10' (3.05 m) sections. Other section lengths are available. Load tables are reprinted from engineering reports
developed by Parkhill, Smith & Cooper, Inc., Structural Engineers, and apply to truss fabricated after December 1989.
72
PARTS LIST
Truss Circles 76
Light duty truss 12x12 plated
Truss Circles 78
Medium duty truss 20.5x20.5 plated
Dance tower 80
Spot chair 81
Strength
Under
Staging and Support Systems Pressure 75
SHOWN ABOVE
20´ 8 TC 1212
76
SHOWN ABOVE
20´ 8 TC 2020
78
30” (76.20)
30” (76.20)
PLAN
86.326” (219.27)
89.714” (227.87)
84” (213.36)
80
45-1/2” (115.57)
(25.08)
9-7/8”
16” 48”
(40.64) (121.92)
Cell clamps 84
Truss accessories 86
Rigging accessories 88
Strength
Under
Staging and Support Systems Pressure 83
CLAMP BASIC CLAMP WITH BOLT AND WINGNUT CLAMP WITH LIFTING EYE
84
Product Description Item Code Product Description Item Code Product Description Item Code
10“ EXTRUDED PICK UP BAR
TC 10EX-PUB LIGHT-DUTY 12X12 TRUSS CHAIN GUIDE TC 1212-CG 3/4" CLEVIS PIN PULLER TC PINPULLER
WITH SHACKLE
12“ EXTRUDED PICKUP BAR
TC 12EX-PUB LIGHT-DUTY 12X18 TRUSS CHAIN GUIDE TC 1218-CG 1" CLEVIS PIN PULLER TC PINPULLER-1
WITH SHACKLE
18“ EXTRUDED PICKUP BAR MEDIUM-DUTY 20.5X20.5 TRUSS
TC 18EX-PUB TC 2020-CG
WITH SHACKLE CHAIN GUIDE
20.5“ EXTRUDED PICKUP BAR DOUBLE HUNG PRE-RIG TRUSS
TC 20EX-PUB TC 2630-CG
WITH SHACKLE CHAIN GUIDE
30“ EXTRUDED PICKUP BAR
TC 30EX-PUB
WITH SHACKLE
86
Product Description Item Code Product Description Item Code Product Description Item Code
SMALL R-CLIP TC RC-SM 5/8IN CLEVIS PIN TC CP-625 24“ x 24“ Aluminum trade show base
TC 12GS-TSBB
for 12“ x 12“ truss - Natural finish
3/4IN CLEVIS PIN TC CP-75
MEDIUM R-CLIP TC RC-MED 24“ x 24“ Aluminum trade show base
3/4IN RADIUS HEAD CLEVIS PIN TC CP-75R TC 1218-TSBB
for 12“ x 18“ truss - Natural finish
LARGE R-CLIP TC RC-LG
1IN CLEVIS PIN TC CP-1 30“ x 30“ Aluminum trade show base
for 12“ x 12“ & 20.5“ x 20.5“ truss - TC 2020-TSBB
Natural finish
24“ x 24“ Steel trade show base for 12“ x
12“, 12“ x 18“, 15“ x 15“ 20.5“ x 20.5“ truss - B4620
Powder coated black
Product Description Item Code Product Description Item Code Product Description Item Code
3/8INX5FT WIRE ROPE SLING TC SL3/8X5 1.5FT POLYESTER ROUND SLING TC EN60-1.5 3FT POLYESTER COVERED
TC GACEN60-3
3/8INX10FT WIRE ROPE SLING TC SL3/8X10 2FT POLYESTER ROUND SLING TC EN60-2 WIRE ROPE SLING
4FT POLYESTER COVERED
3/8INX20FT WIRE ROPE SLING TC SL3/8X20 3FT POLYESTER ROUND SLING TC EN60-3 TC GACEN60-4
WIRE ROPE SLING
3/8INX30FT WIRE ROPE SLING TC SL3/8X30 4FT POLYESTER ROUND SLING TC EN60-4
6FT POLYESTER COVERED
1/2INX5FT WIRE ROPE SLING TC SL1/2X5 5FT POLYESTER ROUND SLING TC EN60-5 TC GACEN60-6
WIRE ROPE SLING
1/2INX10FT WIRE ROPE SLING TC SL1/2X10 6FT POLYESTER ROUND SLING TC EN60-6 9FT POLYESTER COVERED
TC GACEN60-9
1/2INX20FT WIRE ROPE SLING TC SL1/2X20 8FT POLYESTER ROUND SLING TC EN60-8 WIRE ROPE SLING
1/2INX30FT WIRE ROPE SLING TC SL1/2X30 9FT POLYESTER ROUND SLING TC EN60-9
Custom sizes available.
Custom sizes available. Custom sizes available.
SHACKLES BUNGIES
88
Strength
Under
Staging and Support Systems Pressure 91
92
94
96
Strength
Under
Staging and Support Systems Pressure 99
31”
Style
6” Head Block
Mark I Tower
Mark II Tower
Mark III 12” Tower
CONNECTIONS
Bolts
Spigots
Top Tower - 10’
MK2
12”
Hinge
44”/56” Radius Head Pin
20”
20”
”
.5
”
67
.5
Stabilizer
67
12” Stabiliz
12”
6”
100
Product Description Item Code Weight Product Description Item Code Weight
lbs (kgs) lbs (kgs)
3FT MK3 12 x 12 TOWER TC 12G3-036S 29 (13) 3' MK1 12" x 12" TOWER TC 12G1-036B 26 (13)
5FT MK3 12 x 12 TOWER TC 12G3-060S 40 (18) 5' MK1 12" x 12" TOWER TC 12G1-060B 40 (18)
8FT MK3 12 x 12 TOWER TC 12G3-096S 58 (27) 8' MK1 12" x 12" TOWER TC 12G1-096B 58 (27)
10FT MK3 12 x 12 TOWER TC 12G3-120S 69 (31) 10' MK1 12" x 12" TOWER TC 12G1-120B 69 (31)
44" HINGE BLOCK FOR 12" TOWER 3' MK2 12" x 12" TOWER TC 12G2-036B 34 (15)
(for use with MD and PRT trusses) TC 12G3-H44S 61 (27) 5' MK2 12" x 12" TOWER TC 12G2-060B 49 (22)
56" HINGE BLOCK FOR 12" TOWER 8' MK2 12" x 12" TOWER TC 12G2-096B 71 (32)
(for use with HD trusses) TC 12G3-H56S 67 (30) 10' MK2 12" x 12" TOWER TC 12G2-120B 87 (39)
BASE FOR 12 x 12 TOWER TC 12G3-BS-2 46 (21) 44" HINGE BLOCK FOR 12" TOWER TC 12GS-H44B 61 (27)
OUTRIGGER/STABILIZER (for use with MD & PRT Trusses)
SET PER TOWER
56" HINGE BLOCK FOR 12" TOWER TC 12GS-H56B 67 (30)
for use with 44" hinge block TC 12G3-OS44-2 101 (46)
(for use with HD Trusses)
for use with 56" hinge block TC 12G3-OS56-2 103 (47)
BASE FOR 12" X 12" TOWER TC 12GS-BB-2 46 (2)1
HEADBLOCK FOR 12 x 12 TOWER
OUTRIGGER/STABILIZER
(for use with 2020, 2630, 3020) TC 12G3-HBB 41 (18) SET/TOWER
RADIUS HEAD 3/4" CLEVIS PIN TC CP-75R For use with 44" Hinge Block TC 12GS-OS44-2 101 (46)
* Standard for GS 5/16“ chain For use with 56" Hinge Block TC 12GS-OS56-2 103 (47)
Note: Designed to raise TOMCAT truss using Columbus McKinnon Theatrical Chain Hoists (Headblock sheaves for 5/16“ chain
is standard, but 1/4“ chain sheaves are available). Standard sleeve blocks are available for midsize to large types of TOMCAT
truss. All hinge and spigot connections employ 3/4“ radius head pins.
*Towers are designed to support both axial and flexural (bending) loads simultaneously.
Axial load capacity is dependent upon the amount of flexural loading placed upon the structure through a number of sources
including, but not limited to, the eccentric axial loads, moment transfer from horizontal truss loading (via sleeve and corner
blocks), wind forces and seismic forces. Due to the interdependent nature of the two forces, the loads stated above should
be used for reference only. As either of the variables change along their respective planes, allowable loads may increase
or decrease as a result. Axial loads are represented in the table above in both pounds and kilograms. Flexural loads are
represented in kip feet. Dynamic loads must be converted into a static load equivalent for comparison with the rated capacity.
All towers for outdoor use must be checked for flexural loads introduced by wind loading on the towers and related structures.
Contact your TOMCAT representative for further assistance and additional information on the specific use of towers for your
particular situation.
37”
6” H
To
37”
6” Head Block
59-3/8”
H
Ra
24”
5”
16”
6”
16” Spigot
Top Tower - 10’, 20’ 110” Radius Pin
Base
Spigot
Radius Pin
Spigot
59-3/8”
16” Hinge 5’
Radius Pin Radius Head Pin
24”
5”
.7
Stabilizer
77
16” Spigot
Mid Tower
16” - 5’, 10’
Radius Pin 6”
Spigot
110”
Radius Pin Base Outrigger
Mid Tower - 5’, 10’
59-3/8”
Hinge 5’
Radius Spigot
Head Pin
* Standard for GS 5/16“ chain
24”
5”
Radius Pin
.7
Stabilizer
77
16”
59-3/8”
6” Hinge 5’
Radius Head Pin
24”
102
5”
110”
Outrigger
.7
Base Stabilizer
77
16”
6”
110”
Base Outrigger
TCat2019_3_152.indd 102 04.11.19 13:29
16” ground system components
Connections are steel spigots & 3/4” clevis pins
16“ Tower
Profile size (square) 16” (40.6 cm)
Indoor Use Yes
Outdoor Use Yes
Bolt Connection No
Spigot Connection Yes
Maximum Height 45’ (13.72 m)
Max. Axial Load* 4000 lbs (1815 kg)
Max. Flexural Load* 19.98 Kft.
Note: Designed to raise TOMCAT truss using Columbus McKinnon Theatrical Chain Hoists (Headblock sheaves for 5/16“ chain
is standard, but 1/4“ chain sheaves are available). Standard sleeve blocks are available for midsize to large types of TOMCAT
truss. All hinge and spigot connections employ 3/4“ radius head pins.
*Towers are designed to support both axial and flexural (bending) loads simultaneously.
Axial load capacity is dependent upon the amount of flexural loading placed upon the structure through a number of sources
including, but not limited to, the eccentric axial loads, moment transfer from horizontal truss loading (via sleeve and corner
blocks), wind forces and seismic forces. Due to the interdependent nature of the two forces, the loads stated above should
be used for reference only. As either of the variables change along their respective planes, allowable loads may increase
or decrease as a result. Axial loads are represented in the table above in both pounds and kilograms. Flexural loads are
represented in kip feet. Dynamic loads must be converted into a static load equivalent for comparison with the rated capacity.
All towers for outdoor use must be checked for flexural loads introduced by wind loading on the towers and related structures.
Contact your TOMCAT representative for further assistance and additional information on the specific use of towers for your
particular situation.
46 x 43 Roof 106
46 x 43 Roof with wings 108
PRT Sunshade roof system 5x5 110
PRT Sunshade flat with wings 112
PRT Sunshade roof system peaked 114
PRT Sunshade peaked with wings 116
45 x 45 Ladder roof 118
45 x 45 Ladder roof with PA wings 120
65 x 45 Ladder roof 122
65 x 45 Ladder roof with PA wings 124
64 x 40 BFT 126
64 x 40 BFT with PA wings 128
64 x 55 BFT with PA wings 130
KT - 7 100 x 80 Roof system with PA wings 132
Strength
Under
Staging and Support Systems Pressure 105
106
41’
28’ 10”
Elevation
43’ 9”
41’
End View
Plan
108
77'-11 7/8"
36'-4 3/4"
31'-11 7/8"
29'-8 1/4"
29'-5 7/8"
Elevation
46'-7 1/2"
10'-4 3/8"
9'-9 7/8"
10'-0 7/8"
43'-8 1/2"
77'-11 7/8"
Plan
9'-5 7/8"
110
End View
Plan
112
End View
Plan
114
End View
Plan
116
End View
Plan
118
30’ 4-3/4”
36’ 0-5/8”
35’ 6-5/8”
42’ 2-1/2”
Elevation
36’ 5”
42’ 2-1/2”
End View
51’ 1-3/8”
44’ 11”
51’ 1-3/8”
44’ 11”
Plan
120
End View
Plan
122
End View
Plan
124
37’ 10-5/8”
30’ 4-3/4”
21’ 4-1/2” (typ) 63’ 0-1/2”
Elevation
End View
65’ 9”
64’ 0-1/2”
44’ 9”
24’ 1” (typ)
22’ 4-1/2”
108’ 9-1/2”
Plan 110’ 6”
126
End View
Plan
128
End View
Plan
130
End View
Plan
132
43’ 1-7/8”
46’ 11-1/8”
48’ 5-5/8”
49’ 10-1/4”
54’ 5-3/4”
21’ 5-3/8”
1’ 9-5/8”
Elevation
End View
19’ 3-3/8”
Between
Center
17’ 8-1/8”
19’ 3-3/8”
Between
Center
80’ 8-5/8” MAIN GRID
17’ 8-1/8”
19’ 3-3/8”
Between
Center
19’ 3-3/8”
17’ 8-1/8”
22’ 10-3/8”
P.A. WING
Between
Center
Strength
Under
Staging and Support Systems Pressure 137
TC CWB-B TC CWB-VC
They are standard lightweight crowd control systems. They can be bolted together for one Apart from the standard section, the barrier can be delivered in several corner types to
firmly anchored fence that will remain in place even in very agitated situations. They fold meet any environment requirements. It folds flat after use and can be stacked on dollies for
flat after use and can be stacked on dollies or easy transport and storage. easy transport and storage.
CROWD BARRIER – STANDARD HALF MODULE CROWD BARRIER - GATE ACCESS & CABLE SLOT MODULE
TC CWB-BH TC CWB-DC
Foldable, all aluminium barrier that’s half the size of a standard barrier. Bolts together with Crowd barriers are used ad hoc when audiences and spectators need to be held at a
single modules for a unified, firmly anchored barrier that withstands unruly crowds. Fold distance, but sometimes you need to have an easy access. This is the case with this vari-
flat after use and stack on dollies for convenient transport and storage ant provided with a gate. Crowd barriers ensure safety, high quality and ease of use with
ergonomics and easy handling. They fold flat after use and can be stacked on dollies for
Material Dimensions Weight easy transport and storage
20.39 x 49.21 x 46.65 (H) inch 45.85 lbs
Aluminum alloy EN AW-6082 T6 Material Dimensions Weight
518 x 1250 x 1186 (H) mm 20.8 kg
40.74 x 49.21 x 46.65 (H) inch 99.20 lbs
Aluminum alloy EN AW-6082 T6
1035 x 1250 x 1185 (H) mm 45 kg
Connection kit included
Connection kit included
138
TC CWB-BC TC CWB-V-CART
Crowd barriers are used at sports events, political rallies, parades, demonstrations, and A quality aluminum trolley has been developed to hold 10 folded standard crowd barriers.
outdoor and indoor performances. This model can hold cables for a safe way of laying and Crowd barriers folded flat are easily stored and transported in the trolley.
protecting cables, hoses and ducts. All profiles have soft, rounded edges for maximum
comfort. They fold flat after use and can be stacked on dollies for easy transport and storage Material Dimensions Weight
53.54 x 45.47 x 50.08 inch 130.07 lbs
Material Dimensions Weight Aluminum alloy EN AW-6082 T6
1360 x 1155 x 1272 (H) mm 59 kg
40.74 x 49.21 x 46.65 (H) inch 108,68 lbs
Aluminum alloy EN AW-6082 T6
1035 x 1250 x 1185 (H) mm 49.3 kg
CROWD BARRIER – VARIO LIGHT MODULE CROWD BARRIER – VARIO LIGHT WITH 15 CM MODULE
TC CWB-VL TC CWB-VLC
A double-hinged corner without floorplate, the Vario Light module is a vertical part that A double-hinged corner without floorplate, the Vario Light module is a vertical part that
connects with other barriers sections. This enables the Vario Light module to angle in any connects with other barriers sections. Barrier module with 15 cm cable slot. 0° to 90°
shape wanted varying from -90° to +90°.
Material Dimensions Weight
Material Dimensions Weight
36.30 x 8.84 x 46.70 inch 42,10 lbs
Aluminum alloy EN AW-6082 T6
41.53 x 45.07 inch 44.09 lbs 922 x 250 x 1186 (H) mm 19.1 kg
Aluminum alloy EN AW-6082 T6
1055 x 1145 mm 20 kg
CROWD BARRIER – OUTSIDE CORNER 90° MODULE CROWD BARRIER – INSIDE CORNER 30° MODULE
TC CWB-OC90 TC CWB-IC30
Barrier module for cretaing 90° outside corners. Bolts together with single modules for a Barrier module for cretaing 30° inside corners. Bolts together with single modules for a
unified, firmly anchored barrier that withstands unruly crowds. Fold flat after use and stack unified, firmly anchored barrier that withstands unruly crowds. Fold flat after use and stack
on dollies for convenient transport and storage on dollies for convenient transport and storage.
CROWD BARRIER – INSIDE CORNER 90° MODULE CROWD BARRIER – SINGLE GATE ACCESS MODULE
TC CWB-IC90 TC CWB-SGA
Barrier module for cretaing 90° inside corners. Bolts together with single modules for a The single gate barrier module is the right choice when you need only one access point for
unified, firmly anchored barrier that withstands unruly crowds. Fold flat after use and stack crowds entering live events. Bolts together with single modules for a unified, firmly anchored
on dollies for convenient transport and storage. barrier. Fold flat after use and stack on dollies for convenient transport and storage.
140
CROWD BARRIER - EMERGENCY GATE MODULE CROWD BARRIER – HEIGHT ADJUSTABLE ADAPTOR
TC CWB-EG TC CWB-LHA
Emergency Gate Module provides immediate access to your audience when it counts the height adjustable adapter ensures that your barrier modules are stable and secure on
most. Footsteps above the deck allow for easier lifting of persons with health issue over uneven ground and other types of challenging terrain.
the barrier and two separate door gates provide a convenient 115 cm entrance/exit point for
your staff before, during and after the event. Material Weight
9.48 lbs
Material Dimensions Weight Aluminum alloy EN AW-6082 T6
4.3 kg
81.50 x 49.21 x 46.69 (H) inch 222.27 lbs
Aluminum alloy EN AW-6082 T6
2070 x 1250 x 1186 mm 100.8 kg
signed as a complete
expense, but it can be far less expensive than going with-
out the service, considering the destructive capabilities of
system, not simply as weather.
a grocery list of parts. Another portion of the OMP needs to be training and un-
derstanding of the actions in various conditions for all the
identification for each component (i.e. serial numbers), and people involved with the structure. These can include the
specific dates correlating to each inspection. If you don’t promoter, artist, venue staff, security personnel, EMS, and
have these records on hand for your structure right now, im- local authorities. It doesn’t do any good to have an action
mediately take the time to get each component inspected. plan if no one knows what it is, or if everyone involved has
144
physically set up is
compliant with that big
package of documents.
determine the various For example, in the previously mentioned simple span, an
148
Figure 3: Three supports and circular, but still simple Figure 4: A beam, but an indeterminate structure—not
simple
Figure
Figure 1.
1.
Handling Figure 1
150
Credit policy a part not of Tomcat’s manufacture; and (v) except for its
duty to repair or replace defective parts, Tomcat shall not be
It is the policy of Tomcat Global Corporation (herein after liable for any consequential or incidental damages resulting
referred to as “Tomcat”) that payment be received with the from a defective part.
order unless other arrangements have been made, such
as cash on delivery. Credit will only be extended to those Tomcat reserves the right to change materials or design,
clients who have successfully completed a credit applica- when, in our opinion, such changes will improve the product.
tion, signed a purchase agreement, or otherwise established This warranty is performed in the geographic location where
credit with Tomcat. Down payments may be required from the originating order was placed and all obligations, rights,
customers (including those with credit approval) for custom and duties of the buyer and Tomcat shall be governed by the
products or other situations that require special raw material laws of that same geographic location.
purchases or engineering. In such cases, the ordering of
materials and fabrication will not proceed until payment or Return policy
a letter of credit has been received.
Prior to returning any item purchased from Tomcat,
Shipping policy a customer must first contact Tomcat to obtain a Returned
Goods Authorization number (RGA no.). Returned goods
All shipments are “Ex-works” at the geographic location without prior authorization will not be accepted. Tomcat will
where the order is placed and shall be in good order upon not generally pay the cost of return freight, and reserves the
release to the carrier. All claims for damage or loss in transit right to refuse return shipments where the freight has not
must be filed by the consignee against the carrier. All freight been prepaid by the returning party.
should be checked for quantity against bill provided by the
carrier. Shipments should be inspected by removing all
packaging and checking the truss for damage to chords,
internals or to the end of tubes before signing the carri-
er’s receipt. Damage noted on the freight bill will enable the
consignee to file a claim against the carrier. Any transport
insurance is the responsibility of the purchaser. Tomcat will
not be held responsible or liable for damage, loss or delay in
transit.
Product guarantee
T +1 (865) 219-3700
sales@tomcatusa.com
www.tomcatglobal.com