Professional Documents
Culture Documents
P368 High Line Pressure Transducer Datasheet
P368 High Line Pressure Transducer Datasheet
Features
Low dP Range, High Line Pressure
Ranges From 8.0 to 10,000 psi FS
Wet-Wet Capability
Line Pressure to 10,000 psig
5Vdc or 4-20mA Output (P365)
USB or Serial (P368)
Stainless Steel Pressure Cavities
The P365 and P368 pressure transducers are The P365 is available in three output
designed to make low differential pressure configurations: 4-20 mA current sink output,
measurements at high static line pressures. DC output and isolated DC output. The 4-20
The P365, operating from unregulated 9 to mA output version is a true-two-wire system
55Vdc, is available with 4-20mA, 5Vdc or which will operate over a supply voltage of 9 to
isolated 5Vdc output over full scale pressure 55 Vdc. Zero and span controls are available
ranges from 8 to 10,000 psid. The P368 for external adjustments, and the wiring may
version is available with digital output via USB be via connector or pigtail options.
or Serial. The output shift due to static
pressure will not exceed 3% of full scale, up to The DC version is a direct replacement for the
a line pressure of 10,000 psig. The P365 and Vdc signal. The isolated DC output version
P368 will accept both gases and liquids provides the same ±5 Vdc signal, isolated from
directly at the sensing diaphragm; there are the power supply by 100 MOhms.
no internal isolation fluids to slow the sensor
response or cause excessive temperature The P368 is available in three digital output
error shifts. configurations: USB or ±5 Vdc along with
digital output via the serial port.
The pressure transducer is ideal for flow or Pressure port placement like shown in the
pressure drop measurements in high pressure picture above have the pressure port and the
hydraulic systems. Its compact design and connector at a 90º angle is one of the two
rugged construction allow it to be used in options available. Pressure port and the
harsh environments. connector at a 180º angle is also available as
an option for easy manifolding.
Sensor wetter parts include 410 stainless
steel suitable for inert gases and The P365/P368 is ideal for:
hydrocarbons. 316 SST for water-based fluids Core Testing Applications
and Inconel for corrosive applications along
with a number of plating options are also Hydraulic Systems
available. High Line Pressures and Low
dP
Specifications
General Specifications -
Type: High Line, Differential or Electrical Connector: PT02A-10-6P (STD),
Gage Pressure Transducer other options available
A: + Power A: No Connection
B: + Signal B: - Power
C: - Signal (Common) C: - Data
D: - Power (Common) D: + Data
E: Tx Data E: + Power
F: Rx Data F: N/C
9 = Hastelloy
P365D - 1 - N - 1 - XX - S - 4 - A
O-RINGS CALIBRATED OUTPUT (DC): PRESSURE PRESSURE PORT OPTIONS
RANGE
ISO -FS ZERO +FS
N = BUNA-N (STD) PRESSURE PORT
1= 0 +5v Two digit
E = Ethylene Propylene 2= -5v 0 +5v Range Dash A = 1/8" NPT Female (STD)
3= 0 +2.5v +5v Number (90º from elec. Conn.)
V = Viton-A 4= - 4mA 20mA
5= 4mA 12mA 20mA See Page 7 B = 5/16”-24 UNJF-3B
S = Silicone (AS5202-2) (180º from elec.
6= X - 0 +5Vdc
Conn.
T = Teflon 7= X -5Vdc 0 +5Vdc
8= X 0 +2.5Vdc +5Vdc
*Consult factory for other
o-rings
Special Requirements?
With over 3000 custom specifications already we are confident we can customize a solution to fit your
needs. Form factor, housing, pressure ports, electrical connectors, outputs and calibrations are all
customizable. Contact our factory via email or phone today!
9 = Hastelloy
P368D - 1 - N - 1 - XX - S - 4 - A
O-RINGS CALIBRATED OUTPUT: PRESSURE PRESSURE PORT OPTIONS
RANGE
-FS ZERO +FS
N = BUNA-N (STD) PRESSURE PORT
9 = Digital Digital Digital Two Way USB Two digit
E = Ethylene Propylene X = -5Vdc 0 +5Vdc Two Way RS485 Range Dash A = 1/8" NPT Female (STD)
Y= Digital Digital One Way USB Number (90º from elec. Conn.)
V = Viton-A Z= 0 +5Vdc One Way RS485
See Page 7 B = 5/16”-24 UNJF-3B
S = Silicone (AS5202-2) (180º from elec.
Conn.
T = Teflon
Special Requirements?
With over 3000 custom specifications already we are confident we can customize a solution to fit your
needs. Form factor, housing, pressure ports, electrical connectors, outputs and calibrations are all
customizable. Contact our factory via email or phone today!
- Units can be calibrated in other engineering units as well. Contact the factory for details.
- For pressures in between range codes, pick the lower range code
Updated 04/25/19