Professional Documents
Culture Documents
Setting Instructions For Huawei Weather Station
Setting Instructions For Huawei Weather Station
Setting Instructions For Huawei Weather Station
of
Seven Sensors to
Huawei Smartloggers
TECHNICAL FILE
Following meteorological data to be provided by Solar Sensor Box. Communication protocol is Modbus RTU
and the connection can be made with a two-wire RS485 cable.
1. Cable Connection
Connect the green wire (RS485+) of the output cable of the Sensor Box to COM3 (+) port of the Smartlogger
and connect the yellow wire (RS485-) of the output cable of the Sensor Box to COM3 (-) port of the Smartlogger
as shown in Figure 1. Another free port also can be selected for connection (COM1/COM2) for the same
purpose.
Note: 4x0,22 mm2 LIYC11Y PUR or Cat6 cable can be used as the communication and power cable between
the sensor and the data logger.
Rev.01
Irradiance Sensor
Module Temperature
Sensor
Figure 1
Rev.01
2. Settings
Seven Sensor Box will not be detected automatically. Settings shall be proceeded by manually.
Login as "Advanced User" (Default password: Changeme) and make following RS485 settings before
connecting the Sensor Box.
Select Settings Comm. Param. RS485 (Figure 2).
Factory default settings for Sensor Box: 9600 Baud, 8N1, address: 1 (or any other baud and id value for
the sensor can be used).
3
4
RS485 2
Figure 2
Follow the steps below to add a new EMI device (Sensor Box):
Maintenance Device Management Connect Device Add Devices
Select Device Type as EMI.
Comm. Protocol as Modbus RTU.
Port number as 3 (or any other, where you connect your Sensor Box).
Address as 1 and click on "Add Devices".
Rev.01
Connect Device 6
8
7
Add Devices
Figure 3
Monitoring EMI (COM3) Running Param.
Default EMI settings in Figure 4 shall be changed as per Sensor Box Modbus RTU settings, gain and
offset values shown in Table 1.
10
12
13
EMI (COM3) 11
14 15
16
Figure 4
Rev.01
15 0x0F Cell temperature as 'sign value' -550 ... +1250 [range -55 ... +125°C] in 0.1°C
16 0x10 Ext. temp. 1 as 'sign value' -550 ... +1250 [range -55 ... +125°C] in 0.1°C
17 0x11 Ext. temp. 2 as 'sign value' -550 ... +1250 [range -55 ... +125°C] in 0.1°C
Table 1
After doing all the string settings on NetEco, total irradiance and Performance ratio will appear on main screen.
Figure 5
Rev.01
Contact Information:
Please feel free to contact our technical team if you face any difficulties during settings.
Furkan POKER
Mob: +90 537 966 0630
Email: sales@sevensensor.com
Rev.01