Professional Documents
Culture Documents
2612 Inspection For Release
2612 Inspection For Release
*600 Hours / 12 Months Inspection and 200 Hours / 12 Months – Scheduled Inspection (same
content)
1. clean the lh lower nose compartment wiring and harness assemblies to remove contaminants and
dust and lint build-up
2. clean the lh lower nose compartment wiring and harness assemblies to remove contaminants and
dust and lint build-up
3. detailed inspection of the fire extinguisher discharge lines
4. do a functional check of the pilots standby compass
5. do a functional check of the copilots standby compass
6. general visual inspection standby compasses (2)
7. inspection - 12 month avionics
8. inspection - standby instruments
9. detailed inspection of the sealant around the roof beam doublers between sta 168.285 and sta
213.568
10. do a general visual inspection of the tail skid assembly
11. check to make sure that the drains on the tail rotor gearbox support assembly, tailboom
assembly, sidebody panels, cabin belly panels, and crew belly panels are clear of debris
12. general visual inspection of zone 710
13. general visual inspection of all electrical harnesses in the no. 1 engine compartment
14. general visual inspection of all electrical harnesses in the no. 2 engine compartment
15. general visual inspection transmission cowl assemblies (600el and 600er) / transmission cowl
door assemblies (600fl and 600fr) / engine air intake basic inlets (700bl and 700br) / aft engine
cowl assemblies (700cl and 700cr) / aft engine cowl door assemblies (700dl and 700dr) / forward
exhaust fairings (700gl and 700gr) / aft exhaust fairing (700h)
1. detailed inspection of the connector 4296j3 to include the backshell and the l/hirf braid sock
2. detailed inspection of the connector 4296j4 to include the backshell and the l/hirf braid sock
3. detailed inspection of the vertical fin and horizontal stabilizer position lights
4. general visual inspection of the four static ports
5. general visual inspection of the pilot and copilot pitot tubes
6. detailed inspection of the crew door and passenger door hinge assemblies
7. detailed inspection of the crew door and passenger door latch mechanism
8. detailed inspection of the engine deck assembly
9. general visual inspection of the forward transmission deck area, hydraulic modules, and
manifolds
10. general visual inspection of the roof assembly and roof beams
11. general visual inspection of the vertical live mounts
12. general visual inspection of the pitch restraint spring assemblies
13. detailed inspection of the directional control tube assembly
14. general visual inspection of the oil cooler compartment to include roof beams and roof panels
15. detailed inspection of the connector 4296j8 to include the backshell and the l/hirf braid sock
*50 Hours Inspection – Scheduled Inspection -- (DI of T/R Pitch Link Assy)
*400 Hours / 12 Months – Scheduled Inspection – (
*Airworthiness Directives and Service Bulletins