Professional Documents
Culture Documents
WALSIN Varistors MOV
WALSIN Varistors MOV
■ How to Order
VZ 10 D 241 K B S E X
Type code Disk Type Varistor Voltage Tolerance Pack code Lead Type Lead Cutting Special Request
Size code
V:SINCERA* 05: 5mm D: Standard disk (DC volt) J: +/-5% B: Bulk S: Straight (For Varistor Lead cutting Lead spacing
VARISTOR 07: 7mm series (From 180 to 112) K:+/-10% T: Tape or Ammo voltage < 511K), and (see below) (see below)
Z:ZINC OXIDE 10: 10mm E: High energy Two significant digits (Please see page Inline crimped (For
14: 14mm disk series Followed by no. of E11 to refer taping ≧
Varistor voltag 511K)
18: 18mm zeros code) L: Inline crimped(For
20: 20mm 180=18volt Varistor voltage<511K)
25: 25mm 101=100volt N: Straight(For varistor
32: 32mm 102=1000volt ≧
voltage 511K)
34: 34mm O: Outward Crimped
40: 40mm I: Inward Crimped
53: 53mm
*SINCERA is the brand name of Varistor and PTCR products of Walsin Technology Corp.
*± 0.02
**± 1.0
d
d
W W
H H
d d
W W
■ Characteristics ■ Applications
hHigh performance transient voltage suppression hSurge protection in:
hShort response time to surge voltage hconsumer electronics
hLow standby power dissipation hindustrial electronics
hExcellent clamping characteristics hcommunication electronics
hHigh performance withstanding surge hmeasuring and controlling systems
currents helectronic home appliances
hHigh reliability hProtection against surges induced by lighting striking incoming
hUL, CSA, VDE and SEV recognized power lines.
hSuppression of surges caused by switching inductive loads such
as transformers, relays and coils.
hProtection of rectification diodes, SCRs, power transistors, semiconductor
devices, etc.
:
specified waveforms). 10mm 0.05 0.4
Maximum Clamping Voltage 14mm 0.1 0.6
Measured peak voltage across the device terminals 18mm — 0.8
when a current impulse of specified amplitude and 20mm 0.2 1.0
25mm — 1.2
:
waveform is conducted through the varistor.
Typical Capacitance 32mm — 1.6
Typical capacitance values are measured at a test frequency 34mm(single) — 2.1
of 1kHz. 34mm(dual) — 2.73
Capacitance values are only for reference purpose only, not 40mm — 2.1
subject to outgoing inspection. 53mm — 2.5
All definitions are according to IEEE specifications C62.33.
■ Energy Derating Versus Temperature ■ Peak Current Per Pulse Versus Pulse Duration
100%
Number of Pulses on Order from 100%
Respectively:
Number of Pulses on Order From 100%
Percent of Rated Power Energy
Respectively:
Percentage of Peak Current Rating
120%
1 Pulse
10%
100% ngti
a
1
10Pules
Pulses
R
tn
er
ru 102 Pulses
10 Puleses
80% C
103 Pulses
2
ka 10 Pulses
eP 1%
60% of 10 10Pulses
3
4 Pulses
eg
at
ne 10 10Pulses
5 Pulses
4
cr
eP
40% 0.1%
10 10Pulses
5
6 Pulses
0% 〜〜 0.01% 2
0 5
0 1
0 2
0 5
0 1
,0 2
,0 5
,0 1
0 1
5
℃
-55 50 60 70 80 90 100 110 120 130 0 0 0 0 0 0 ,0 ,0
0 0 0 0
0 0
0
Ambient Temperature, Pulse Duration, Microseconds