Download as rtf, pdf, or txt
Download as rtf, pdf, or txt
You are on page 1of 3

IMO Res.A.

1156(32)

GUIDELINES CHECK LIST FOR INITIAL SURVEY


FOR MARPOL ANNEX VI PREVENTION AIR POLLUTION
CERTIFIC.

Annex
No. Report No. Page No. Total Pages

REG. NO. NAME OF SHIP FLAG SURVEYOR DATE

42729W KAMER NB.66 Türkiye U. Kara 06 Dec 2022

(AI) 4.1 Initial surveys - see part “General” section 4.1

ITEM SURVEY CARRIED OUT CONDITION


No. WR SR

Ozone-depleting substances (MARPOL Annex VI reg.12):

.1 confirming, if applicable, the satisfactory installation and operation of systems using ozone-depleting
(AI) substances;
4.1.2.1 .2 confirming that no installation or equipment containing ozone-depleting substances, other than
hydrochlorofluorocarbons, has been installed since 19 May 2005, (MARPOL Annex VI reg.12.3.1);
.3 confirming that no installation or equipment containing hydrochlorofluorocarbons have been fitted since 1
January 2020 (MARPOL Annex VI reg.12.3.2);

* CONDITIONS
– WR : without remark, i.e. at the surveyor’s satisfaction
– SR : see remarks (work, repair, inventory, made) : enter remarks overleaf with item number
– NA : not applicable

Guidelines Check list – MARPOL Annex VI Prevention Air - 1/ 3 -


Pollution Certific.
IMO Res.A.1156(32)

Nitrogen oxide emissions from marine diesel engines (MARPOL Annex VI reg.13):

.1 confirming that all marine diesel engines which are required to be certified are pre-certified in accordance
with section 2.2 of the NOX Technical Code to the required Tier and installed in accordance with the approved
duty cycle.

.1.1 If the engine parameter check method is used:


.1.1.1 an onboard verification survey in accordance with section 6.2 of the NOX Technical Code;

.1.2 If the simplified method is used:


.1.2.1 an onboard verification survey in accordance with section 6.3 of the NOX Technical Code;

(AI) .1.3 If the direct measurement and monitoring method is used (for existing ships only):
4.1.2.2 .1.3.1 an onboard verification survey, in accordance with section 6.4 of the NOX Technical Code;

.1.4 For marine diesel engines with an output of more than 5,000 kW and a per cylinder displacement at or
above 90 litres/cylinder installed on ships constructed between 1 January 1990 and 31 December 1999,
check*(MARPOL Annex VI reg.13.7.3):
.1.4.1 whether an approved method exists but is not applicable;
.1.4.2 whether an approved method is not commercially available at this survey; or
.1.4.3 that an approved method is installed and, where this is the case, that there is an approved method file,
and apply the verification procedures as given in the approved method file;
.1.4.4 or that the engine has been certified, confirming that it operates within the limits set forth for Tier I, Tier
II or Tier III;

* Refer to the 2014 Guidelines on the approved method process (resolution MEPC.243(66)).

Sulphur oxides and particulate matter (MARPOL Annex VI reg.14):

.1 confirming, if appropriate, that:


.1.1 satisfactory arrangements are in place for using compliant fuel as required; or
.1.2 satisfactory installation and operation of the fuel switching arrangements are in place when tanks are
(AI)
provided for different grades of fuel, and that a written procedure showing how the fuel oil changeover is done,
4.1.2.3
is available; or
.1.3 satisfactory installation and operation of the exhaust gas cleaning system* or other technological
methods are examined (MARPOL Annex VI reg.4);

* Refer to the 2015 Guidelines for exhaust gas cleaning systems (resolution MEPC.259(68)).

Volatile Organic Compounds (MARPOL Annex VI reg.15) (if applicable):

.1 confirming the satisfactory installation of the vapour collection piping;


.2 confirming the satisfactory installation and operation of the means provided to eliminate the collection of
(AI)
condensation in the system, such as drains in low points of the line end;
4.1.2.4
.3 confirming the satisfactory installation and operation of the isolation valves at the vapour manifolds;
.4 confirming that the ends of each line are properly identified as vapour collection lines;
.5 confirming that the vapour collection flanges are in accordance with the IMO guidelines and industrial
standards;

* CONDITIONS
– WR : without remark, i.e. at the surveyor’s satisfaction
– SR : see remarks (work, repair, inventory, made) : enter remarks overleaf with item number
– NA : not applicable

Guidelines Check list – MARPOL Annex VI Prevention Air - 2/ 3 -


Pollution Certific.
IMO Res.A.1156(32)

Shipboard Incinerators (MARPOL Annex VI reg.16) (installed on or after 1 January 2000):

(AI)
.1 confirming the satisfactory installation and operation of each incinerator;
4.1.2.5
.2 confirming that the manufacturer's name, incinerator model number/type and capacity in heat units per hour
are permanently marked on the incinerator.

(AI)
the provision of (AA) 4.2.2.2 as applicable except (AA) 4.2.2.2.15.
4.1.3.1

REMARKS:

* CONDITIONS
– WR : without remark, i.e. at the surveyor’s satisfaction
– SR : see remarks (work, repair, inventory, made) : enter remarks overleaf with item number
– NA : not applicable

Guidelines Check list – MARPOL Annex VI Prevention Air - 3/ 3 -


Pollution Certific.

You might also like